Abstract: The continuity in the electric supply of the electric installations is becoming one of the main requirements of the electric supply network (generation, transmission, and distribution of the electric energy). The achievement of this requirement depends from one side on the structure of the electric network and on the other side on the avaibility of the reserve source provided to maintain the supply in case of failure of the principal one. The avaibility of supply does not only depends on the reliability parameters of the both sources (principal and reserve) but it also depends on the reliability of the circuit breaker which plays the role of interlocking the reserve source in case of failure of the principal one. In addition, the principal source being under operation, its control can be ideal and sure, however, for the reserve source being in stop, a preventive maintenances which proceed on time intervals (periodicity) and for well defined lengths of time are envisaged, so that this source will always available in case of the principal source failure. The choice of the periodicity of preventive maintenance of the source of reserve influences directly the reliability of the electric feeder system In this work and on the basis of the semi- markovian's processes, the influence of the time of interlocking the reserve source upon the reliability of an industrial electric network is studied and is given the optimal time of interlocking the reserve source in case of failure the principal one, also the influence of the periodicity of the preventive maintenance of the source of reserve is studied and is given the optimal periodicity.
Abstract: The present paper was concerned primarily with the
analysis, simulation of the air flow and thermal patterns in a lecture
room. The paper is devoted to numerically investigate the influence
of location and number of ventilation and air conditioning supply and
extracts openings on air flow properties in a lecture room. The work
focuses on air flow patterns, thermal behaviour in lecture room where
large number of students. The effectiveness of an air flow system is
commonly assessed by the successful removal of sensible and latent
loads from occupants with additional of attaining air pollutant at a
prescribed level to attain the human thermal comfort conditions and
to improve the indoor air quality; this is the main target during the
present paper. The study is carried out using computational fluid
dynamics (CFD) simulation techniques as embedded in the
commercially available CFD code (FLUENT 6.2). The CFD
modelling techniques solved the continuity, momentum and energy
conservation equations in addition to standard k – ε model equations
for turbulence closure.
Throughout the investigations, numerical validation is carried out by
way of comparisons of numerical and experimental results. Good
agreement is found among both predictions.
Abstract: In association with path dependence, researchers often
talk of institutional “lock-in", thereby indicating that far-reaching
path deviation or path departure are to be regarded as exceptional
cases. This article submits the alleged general inclination for stability
of path-dependent processes to a critical review. The different
reasons for path dependence found in the literature indicate that
different continuity-ensuring mechanisms are at work when people
talk about path dependence (“increasing returns", complementarity,
sequences etc.). As these mechanisms are susceptible to fundamental
change in different ways and to different degrees, the path
dependence concept alone is of only limited explanatory value. It is
therefore indispensable to identify the underlying continuity-ensuring
mechanism as well if a statement-s empirical value is to go beyond
the trivial, always true “history matters".
Abstract: Business continuity management (BCM) identifies
potential external and internal threats to an organization and their
impacts to business operations. The goal of the article is to identify,
based on the analysis of employee turnover in organizations in the
Czech Republic, the role of personnel planning in BCM. The article
is organized as follows. The first part of the article concentrates on
the theoretical background of the topic. The second part of the article
is dedicated to the evaluation of the outcomes of the survey
conducted (questionnaire survey), focusing on the analysis of
employee turnover in organizations in the Czech Republic. The final
part of the article underlines the role of personnel planning in BCM,
since poor planning of staff needs in an organization can represent
a future threat for business continuity ensuring.
Abstract: Analysis for the propagation of elastic waves in
arbitrary anisotropic plates is investigated, commencing with a
formal analysis of waves in a layered plate of an arbitrary anisotropic
media, the dispersion relations of elastic waves are obtained by
invoking continuity at the interface and boundary of conditions on
the surfaces of layered plate. The obtained solutions can be used for
material systems of higher symmetry such as monoclinic,
orthotropic, transversely isotropic, cubic, and isotropic as it is
contained implicitly in the analysis. The cases of free layered plate
and layered half space are considered separately. Some special cases
have also been deduced and discussed. Finally numerical solution of
the frequency equations for an aluminum epoxy is carried out, and
the dispersion curves for the few lower modes are presented. The
results obtained theoretically have been verified numerically and
illustrated graphically.
Abstract: This article examines the emergence and development
of the Kazakhstan species of humanism. The biggest challenge for
Kazakhstan in terms of humanism is connected with advocating
human values in parallel to promoting national interests; preserving
the continuity of traditions in various spheres of life, business and
culture. This should be a common goal for the entire society, the
main direction for a national intelligence, and a platform for the state
policy. An idea worth considering is a formation of national humanist
tradition model; the challenges are adapting people to live in the
context of new industrial and innovative economic conditions,
keeping the balance during intensive economic development of the
country, and ensuring social harmony in the society.
Abstract: When it comes to last, it is regarded as the critical
foundation of shoe design and development. A computer aided
methodology for various last form designs is proposed in this study.
The reverse engineering is mainly applied to the process of scanning
for the last form. Then with the minimum energy for revision of
surface continuity, the surface reconstruction of last is rebuilt by the
feature curves of the scanned last. When the surface reconstruction of
last is completed, the weighted arithmetic mean method is applied to
the computation on the shape morphing for the control mesh of last,
thus 3D last form of different sizes is generated from its original form
feature with functions remained. In the end, the result of this study is
applied to an application for 3D last reconstruction system. The
practicability of the proposed methodology is verified through later
case studies.
Abstract: In current global economics the application of Business Continuity Management is the prerequisite for sustainable competitive advantage in an organization. Business Continuity Management is a managerial which identifies the potential impact of losses in an organization. The aim of this paper is to identify and critically evaluate the relative advantages and disadvantages of deploying Business Continuity Management in an organization on the basis of seven criteria. The strongest advantage of Business Continuity Management is in its capacity to identify a crisis situation and help the organization to flexibly and also to keep the critical knowledge within the organization. By contrast the main disadvantage is that establishing Business Continuity Management in an organization is time-consuming and its implementation as an integral part of the organizational culture present significant difficulties.
Abstract: CDMA cellular networks support soft handover,
which guarantees the continuity of wireless services and enhanced
communication quality. Cellular networks support multimedia
services under varied propagation environmental conditions. In this
paper, we have shown the effect of characteristic parameters of the
cellular environments on the soft handover performance. We
consider path loss exponent, standard deviation of shadow fading and
correlation coefficient of shadow fading as the characteristic
parameters of the radio propagation environment. A very useful
statistical measure for characterizing the performance of mobile radio
system is the probability of outage. It is shown through numerical
results that above parameters have decisive effect on the probability
of outage and hence the overall performance of the soft handover
algorithm.
Abstract: This paper presents a formant-tracking linear prediction
(FTLP) model for speech processing in noise. The main focus of this
work is the detection of formant trajectory based on Hidden Markov
Models (HMM), for improved formant estimation in noise. The
approach proposed in this paper provides a systematic framework for
modelling and utilization of a time- sequence of peaks which satisfies
continuity constraints on parameter; the within peaks are modelled
by the LP parameters. The formant tracking LP model estimation
is composed of three stages: (1) a pre-cleaning multi-band spectral
subtraction stage to reduce the effect of residue noise on formants
(2) estimation stage where an initial estimate of the LP model of
speech for each frame is obtained (3) a formant classification using
probability models of formants and Viterbi-decoders. The evaluation
results for the estimation of the formant tracking LP model tested
in Gaussian white noise background, demonstrate that the proposed
combination of the initial noise reduction stage with formant tracking
and LPC variable order analysis, results in a significant reduction in
errors and distortions. The performance was evaluated with noisy
natual vowels extracted from international french and English vocabulary
speech signals at SNR value of 10dB. In each case, the
estimated formants are compared to reference formants.
Abstract: Supply chain networks are frequently hit by
unplanned events which lead to disruptions and cause operational and
financial consequences. It is neither possible to avoid disruption risk
entirely, nor are network members able to prepare for every possible
disruptive event. Therefore a continuity planning should be set up
which supports effective operational responses in supply chain
networks in times of emergencies. In this research network related
degrees of freedom which determine the options for responsive
actions are derived from interview data. The findings are further
embedded into a common risk management process. The paper
provides support for researchers and practitioners to identify the
network related options for responsive actions and to determine the
need for improving the reaction capabilities.
Abstract: A numerical study has been carried out to investigate
the heat transfer by natural convection of nanofluid taking Cu as
nanoparticles and the water as based fluid in a three dimensional
annulus enclosure filled with porous media (silica sand) between two
horizontal concentric cylinders with 12 annular fins of 2.4mm
thickness attached to the inner cylinder under steady state conditions.
The governing equations which used are continuity, momentum and
energy equations under an assumptions used Darcy law and
Boussinesq-s approximation which are transformed to dimensionless
equations. The finite difference approach is used to obtain all the
computational results using the MATLAB-7. The parameters affected
on the system are modified Rayleigh number (10 ≤Ra*≤ 1000), fin
length Hf (3, 7 and 11mm), radius ratio Rr (0.293, 0.365 and 0.435)
and the volume fraction(0 ≤ ¤ò ≤ 0 .35). It was found that the
average Nusselt number depends on (Ra*, Hf, Rr and φ). The results
show that, increasing of fin length decreases the heat transfer rate and
for low values of Ra*, decreasing Rr cause to decrease Nu while for
Ra*
greater than 100, decreasing Rr cause to increase Nu and adding
Cu nanoparticles with 0.35 volume fraction cause 27.9%
enhancement in heat transfer. A correlation for Nu in terms of Ra*,
Hf and φ, has been developed for inner hot cylinder.
Abstract: Communication is an important factor and a prop in
directing corporate activities efficiently, in ensuring the flow of
knowledge which is necessary for the continuity of the institution, in
creating a common language in the institution, in transferring
corporate culture and ultimately in corporate success. The idea of
transmitting the knowledge among the workers in a healthy manner
has revived knowledge communication. Knowledge communication
can be defined as the act of mutual creation and communication of
intuitions, assessments, experiences and capabilities, as long as
maintained effectively, can provide advantages such as corporate
continuity, access to corporate objectives and making true
administrative decisions. Although the benefits of the knowledge
communication to corporations are known, and the necessary worth
and care is given, some hardships may arise which makes it difficult
or even block it. In this article, difficulties that prevent knowledge
communication will be discussed and solutions will be proposed.
Abstract: The fundamental objective of the university is to
genuinely provide a higher education to mankind and society. Higher
education institutions earn billions of dollars in research funds, granted
by national government or related institutions, which literally came
from taxpayers. Everyday universities consume those grants; in return,
provide society with a human resource and research developments.
However, not all taxpayers have their major concerns on those
researches, other than that they are more curiously to see the project
being build tangibly and evidently to certify what they pay for. This
paper introduces the concept of University – Community Business
Continuity Management for Disaster – Resilient City, which modified
the concept of Business Continuity Management (BCM) toward
university community to create advancing collaboration leading to the
disaster – resilient community and city. This paper focuses on
describing in details the backgrounds and principles of the concept and
discussing the advantages and limitations of the concept.
Abstract: In article are analyzed value of audiovisual sources which possesses high integrative potential and allows studying movement of information in the history - information movement from generation to the generation, in essence providing continuity of historical development and inheritance of traditions. Information thus fixed in them is considered as a source not only about last condition of society, but also significant for programming of its subsequent activity.
Abstract: The steady incompressible flow has been solved in cylindrical coordinates in both vapour region and wick structure. The governing equations in vapour region are continuity, Navier-Stokes and energy equations. These equations have been solved using SIMPLE algorithm. For study of parameters variation on heat pipe operation, a benchmark has been chosen and the effect of changing one parameter has been analyzed when the others have been fixed.
Abstract: Heating is inevitable in any bearing operation. This
leads to not only the thinning of the lubricant but also could lead to a
thermal deformation of the bearing. The present work is an attempt to
analyze the influence of thermal deformation on the thermohydrodynamic
lubrication of infinitely long tilted pad slider rough
bearings. As a consequence of heating the slider is deformed and is
assumed to take a parabolic shape. Also the asperities expand leading
to smaller effective film thickness. Two different types of surface
roughness are considered: longitudinal roughness and transverse
roughness. Christensen-s stochastic approach is used to derive the
Reynolds-type equations. Density and viscosity are considered to be
temperature dependent. The modified Reynolds equation, momentum
equation, continuity equation and energy equation are decoupled and
solved using finite difference method to yield various bearing
characteristics. From the numerical simulations it is observed that the
performance of the bearing is significantly affected by the thermal
distortion of the slider and asperities and even the parallel sliders
seem to carry some load.
Abstract: A systematic way to derive the conserved quantities for the axisymmetric liquid jet, free jet and wall jet using conservation laws is presented. The flow in axisymmetric jets is governed by Prandtl-s momentum boundary layer equation and the continuity equation. The multiplier approach is used to construct a basis of conserved vectors for the system of two partial differential equations for the two velocity components. The basis consists of two conserved vectors. By integrating the corresponding conservation laws across the jet and imposing the boundary conditions, conserved quantities are derived for the axisymmetric liquid and free jet. The multiplier approach applied to the third-order partial differential equation for the stream function yields two local conserved vectors one of which is a non-local conserved vector for the system. One of the conserved vectors gives the conserved quantity for the axisymmetric free jet but the conserved quantity for the wall jet is not obtained from the second conserved vector. The conserved quantity for the axisymmetric wall jet is derived from a non-local conserved vector of the third-order partial differential equation for the stream function. This non-local conserved vector for the third-order partial differential equation for the stream function is obtained by using the stream function as multiplier.
Abstract: The present contribution deals with the
thermophoretic deposition of nanoparticles over a rapidly rotating
permeable disk in the presence of partial slip, magnetic field, thermal
radiation, thermal-diffusion, and diffusion-thermo effects. The
governing nonlinear partial differential equations such as continuity,
momentum, energy and concentration are transformed into nonlinear
ordinary differential equations using similarity analysis, and the
solutions are obtained through the very efficient computer algebra
software MATLAB. Graphical results for non-dimensional
concentration and temperature profiles including thermophoretic
deposition velocity and Stanton number (thermophoretic deposition
flux) in tabular forms are presented for a range of values of the
parameters characterizing the flow field. It is observed that slip
mechanism, thermal-diffusion, diffusion-thermo, magnetic field and
radiation significantly control the thermophoretic particles deposition
rate. The obtained results may be useful to many industrial and
engineering applications.
Abstract: This study presents an exact general solution for
steady-state conductive heat transfer in cylindrical composite
laminates. Appropriate Fourier transformation has been obtained
using Sturm-Liouville theorem. Series coefficients are achieved by
solving a set of equations that related to thermal boundary conditions
at inner and outer of the cylinder, also related to temperature
continuity and heat flux continuity between each layer. The solution
of this set of equations are obtained using Thomas algorithm. In this
paper, the effect of fibers- angle on temperature distribution of
composite laminate is investigated under general boundary
conditions. Here, we show that the temperature distribution for any
composite laminates is between temperature distribution for
laminates with θ = 0° and θ = 90° .