Abstract: The link between Gröbner basis and linear algebra was
described by Lazard [4,5] where he realized the Gr¨obner basis
computation could be archived by applying Gaussian elimination over
Macaulay-s matrix .
In this paper, we indicate how same technique may be used to
SAGBI- Gröbner basis computations in invariant rings.
Abstract: It is well known that the channel capacity of Multiple-
Input-Multiple-Output (MIMO) system increases as the number of
antenna pairs between transmitter and receiver increases but it suffers
from multiple expensive RF chains. To reduce the cost of RF chains,
Antenna Selection (AS) method can offer a good tradeoff between
expense and performance. In a transmitting AS system, Channel
State Information (CSI) feedback is necessarily required to choose
the best subset of antennas in which the effects of delays and errors
occurred in feedback channels are the most dominant factors
degrading the performance of the AS method. This paper presents the
concept of AS method using CSI from channel reciprocity instead of
feedback method. Reciprocity technique can easily archive CSI by
utilizing a reverse channel where the forward and reverse channels
are symmetrically considered in time, frequency and location. In this
work, the capacity performance of MIMO system when using AS
method at transmitter with reciprocity channels is investigated by
own developing Testbed. The obtained results show that reciprocity
technique offers capacity close to a system with a perfect CSI and
gains a higher capacity than a system without AS method from 0.9 to
2.2 bps/Hz at SNR 10 dB.
Abstract: In this paper, an intelligent algorithm for optimal
document archiving is presented. It is kown that electronic archives
are very important for information system management. Minimizing
the size of the stored data in electronic archive is a main issue to
reduce the physical storage area. Here, the effect of different types of
Arabic fonts on electronic archives size is discussed. Simulation
results show that PDF is the best file format for storage of the Arabic
documents in electronic archive. Furthermore, fast information
detection in a given PDF file is introduced. Such approach uses fast
neural networks (FNNs) implemented in the frequency domain. The
operation of these networks relies on performing cross correlation in
the frequency domain rather than spatial one. It is proved
mathematically and practically that the number of computation steps
required for the presented FNNs is less than that needed by
conventional neural networks (CNNs). Simulation results using
MATLAB confirm the theoretical computations.
Abstract: This research study examines cases of Saudi Arabian
universities and female academics for work environment issues
within the context of design management applications. The study
proposes use of design research, ergonomics and systems design
thinking to develop the university design which facilitates removal of
physical and cognitive barriers for female academics. Review of
literature demonstrates that macro and micro ergonomic combined
with design management and system design strategies can
significantly improve the workplace design for female academics.
The university design model would be prepared based on the analyses
of primary data obtained from archived documents, participants'
observation logs, photo audits, focus groups and semi-structured
interviews of currently employed female academics in the selected
case universities.
Abstract: The growing interest on national heritage
preservation has led to intensive efforts on digital documentation of
cultural heritage knowledge. Encapsulated within this effort is the
focus on ontology development that will help facilitate the
organization and retrieval of the knowledge. Ontologies surrounding
cultural heritage domain are related to archives, museum and library
information such as archaeology, artifacts, paintings, etc. The growth
in number and size of ontologies indicates the well acceptance of its
semantic enrichment in many emerging applications. Nowadays,
there are many heritage information systems available for access.
Among others is community-based e-museum designed to support the
digital cultural heritage preservation. This work extends previous
effort of developing the Traditional Malay Textile (TMT) Knowledge
Model where the model is designed with the intention of auxiliary
mapping with CIDOC CRM. Due to its internal constraints, the
model needs to be transformed in advance. This paper addresses the
issue by reviewing the previous harmonization works with CIDOC
CRM as exemplars in refining the facets in the model particularly
involving TMT-Artifact class. The result is an extensible model
which could lead to a common view for automated mapping with
CIDOC CRM. Hence, it promotes integration and exchange of
textile information especially batik-related between communities in
e-museum applications.
Abstract: Clustering unstructured text documents is an
important issue in data mining community and has a number of
applications such as document archive filtering, document
organization and topic detection and subject tracing. In the real
world, some of the already clustered documents may not be of
importance while new documents of more significance may evolve.
Most of the work done so far in clustering unstructured text
documents overlooks this aspect of clustering. This paper, addresses
this issue by using the Fading Function. The unstructured text
documents are clustered. And for each cluster a statistics structure
called Cluster Profile (CP) is implemented. The cluster profile
incorporates the Fading Function. This Fading Function keeps an
account of the time-dependent importance of the cluster. The work
proposes a novel algorithm Clustering n-ary Merge Algorithm
(CnMA) for unstructured text documents, that uses Cluster Profile
and Fading Function. Experimental results illustrating the
effectiveness of the proposed technique are also included.
Abstract: Most agricultural crops cultivated in Brazil are highly
nutrient demanding. Brazilian soils are generally acidic with low base
saturation and available nutrients. Demand for fertilizer application
has increased because the national agricultural sector expansion. To
improve productivity without environmental impact, there is the need
for the utilization of novel procedures and techniques to optimize
fertilizer application. This includes the digital soil mapping and GIS
application applied to mapping in different scales. This paper is
based on research, realized during 2005 to 2010 by Brazilian
Corporation for Agricultural Research (EMBRAPA) and its partners.
The purpose was to map soil fertility in national and regional scales.
A soil profile data set in national scale (1:5,000,000) was constructed
from the soil archives of Embrapa Soils, Rio de Janeiro and in the
regional scale (1:250,000) from COMIGO Cooperative soil data set,
Rio Verde, Brazil. The mapping was doing using ArcGIS 9.1 tools
from ESRI.
Abstract: Access Management is the proactive management of
vehicular access points to land parcels adjacent to all manner of
roadways. Good access management promotes safe and efficient use
of the transportation network. This study attempts to utilize archived
data from the University Technology of Malaysia on-campus area to
assess the accuracy with which access management display some
benefits. Results show that usage of access management reduces
delay and fewer crashes. Clustered development can improve
walking, cycling and transit travel, reduce parking requirements and
improve emergency responses. Effective Access Management
planning can also reduce total roadway facility costs by reducing the
number of driveways and intersections. At the end after presenting
recommendations some of the travel impact, and benefits that
can be derived if these suggestions are implemented have
been summarized with the related comments.
Abstract: Apparel product development is an important stage in the life cycle of a product. Shortening this stage will help to reduce the costs of a garment. The aim of this study is to examine the production parameters in knitwear apparel companies by defining the unit costs, and developing a software to calculate the unit costs of garments and make the cost estimates. In this study, with the help of a questionnaire, different companies- systems of unit cost estimating and cost calculating were tried to be analyzed. Within the scope of the questionnaire, the importance of cost estimating process for apparel companies and the expectations from a new cost estimating program were investigated. According to the results of the questionnaire, it was seen that the majority of companies which participated to the questionnaire use manual cost calculating methods or simple Microsoft Excel spreadsheets to make cost estimates. Furthermore, it was discovered that many companies meet with difficulties in archiving the cost data for future use and as a solution to that problem, it is thought that prior to making a cost estimate, sub units of garment costs which are fabric, accessory and the labor costs should be analyzed and added to the database of the programme beforehand. Another specification of the cost estimating unit prepared in this study is that the programme was designed to consist of two main units, one of which makes the product specification and the other makes the cost calculation. The programme is prepared as a web-based application in order that the supplier, the manufacturer and the customer can have the opportunity to communicate through the same platform.
Abstract: Transcription factor p53 has a powerful tumor
suppressing function that is associated with many cancers. However,
p53 of the molecular weight was higher make the limitation across to
skin or cell membrane. Thymidine dinucleotide (pTT), an
oligonucleotide, can activate the p53 transcription factor. pTT is a
hydrophilic and negative charge oligonucleotide, which delivery in to
cell membrane need an appropriate carrier. The aim of this study was
to improve the bioavailability of the nucleotide fragment, thymidine
dinucleotide (pTT), using elasic liposome carriers to deliver the drug
into the skin. The study demonstrate that dioleoylphosphocholine
(DOPC) incorporated with sodium cholate at molar ratio 1:1 can
archived the particle size about 220 nm. This elastic liposome could
penetration through skin from stratum corneum to whole epidermis by
confocal laser scanning microscopy (CLSM). Moreover, we observed
the the slight increase in generation of p53 by western blot.
Abstract: Topical photodynamic therapy (PDT) with
5-aminolevulinic acid (ALA) is an alternative therapy for treating
superficial cancer, especially for skin or oral cancer. ALA, a precursor
of the photosensitizer protoporphyrin IX (PpIX), is present as
zwitterions and hydrophilic property which make the low permeability
through the cell membrane. Collagen is a traditional carrier; its
molecular composed various amino acids which bear positive charge
and negative charge. In order to utilize the ion-pairs with ALA and
collagen, the study employed various pH values adjusting the net
charge. The aim of this study was to compare a series collagen form,
including solution, gel and sponge to investigate the topical delivery
behavior of ALA. The in vivo confocal laser scanning microscopy
(CLSM) study demonstrated that PpIX generation ability was different
pattern after apply for 6 h. Gel type could generate high PpIX, and
archived more deep of skin depth.
Abstract: Total liquid ventilation can support gas exchange in animal models of lung injury. Clinical application awaits further technical improvements and performance verification. Our aim was to develop a liquid ventilator, able to deliver accurate tidal volumes, and a computerized system for measuring lung mechanics. The computer-assisted, piston-driven respirator controlled ventilatory parameters that were displayed and modified on a real-time basis. Pressure and temperature transducers along with a lineal displacement controller provided the necessary signals to calculate lung mechanics. Ten newborn lambs (
Abstract: Total liquid ventilation can support gas exchange in animal models of lung injury. Clinical application awaits further technical improvements and performance verification. Our aim was to develop a liquid ventilator, able to deliver accurate tidal volumes, and a computerized system for measuring lung mechanics. The computer-assisted, piston-driven respirator controlled ventilatory parameters that were displayed and modified on a real-time basis. Pressure and temperature transducers along with a lineal displacement controller provided the necessary signals to calculate lung mechanics. Ten newborn lambs (
Abstract: In historical science and social science, the influence
of natural disaster upon society is a matter of great interest. In
recent years, some archives are made through many hands for natural
disasters, however it is inefficiency and waste. So, we suppose a
computer system to create a historical natural disaster archive. As
the target of this analysis, we consider newspaper articles. The news
articles are considered to be typical examples that prescribe the
temporal relations of affairs for natural disaster. In order to do this
analysis, we identify the occurrences in newspaper articles by some
index entries, considering the affairs which are specific to natural
disasters, and show the temporal relation between natural disasters.
We designed and implemented the automatic system of “extraction
of the occurrences of natural disaster" and “temporal relation table
for natural disaster."
Abstract: The problem of spam has been seriously troubling the Internet community during the last few years and currently reached an alarming scale. Observations made at CERN (European Organization for Nuclear Research located in Geneva, Switzerland) show that spam mails can constitute up to 75% of daily SMTP traffic. A naïve Bayesian classifier based on a Bag Of Words representation of an email is widely used to stop this unwanted flood as it combines good performance with simplicity of the training and classification processes. However, facing the constantly changing patterns of spam, it is necessary to assure online adaptability of the classifier. This work proposes combining such a classifier with another NBC (naïve Bayesian classifier) based on pairs of adjacent words. Only the latter will be retrained with examples of spam reported by users. Tests are performed on considerable sets of mails both from public spam archives and CERN mailboxes. They suggest that this architecture can increase spam recall without affecting the classifier precision as it happens when only the NBC based on single words is retrained.
Abstract: There are so many databases of various fields of life sciences available online. To find well-used databases, a survey to measure life science database citation frequency in scientific literatures is done. The survey is done by measuring how many scientific literatures which are available on PubMed Central archive cited a specific life science database. This paper presents and discusses the results of the survey.
Abstract: Mammography is the most effective procedure for an
early diagnosis of the breast cancer. Nowadays, people are trying to
find a way or method to support as much as possible to the
radiologists in diagnosis process. The most popular way is now being
developed is using Computer-Aided Detection (CAD) system to
process the digital mammograms and prompt the suspicious region to
radiologist. In this paper, an automated CAD system for detection
and classification of massive lesions in mammographic images is
presented. The system consists of three processing steps: Regions-Of-
Interest detection, feature extraction and classification. Our CAD
system was evaluated on Mini-MIAS database consisting 322
digitalized mammograms. The CAD system-s performance is
evaluated using Receiver Operating Characteristics (ROC) and Freeresponse
ROC (FROC) curves. The archived results are 3.47 false
positives per image (FPpI) and sensitivity of 85%.
Abstract: Delivering course material via a virtual environment
is beneficial to today-s students because it offers the interactivity,
real-time interaction and social presence that students of all ages
have come to accept in our gaming rich community. It is essential
that the Net Generation also known as Generation Why, have
exposure to learning communities that encompass interactivity to
form social and educational connections. As student and professor
become interconnected through collaboration and interaction in a
virtual learning space, relationships develop and students begin to
take on an individual identity. With this in mind the research project
was developed to investigate the use of virtual environments on
student satisfaction and the effectiveness of course delivery.
Furthermore, the project was designed to integrate both interactive
(real-time) classes conducted in the Virtual Reality (VR)
environment while also creating archived VR sessions for student use
in retaining and reviewing course content.
Abstract: This paper proposes new algorithms for the computeraided
design and manufacture (CAD/CAM) of 3D woven multi-layer
textile structures. Existing commercial CAD/CAM systems are often
restricted to the design and manufacture of 2D weaves. Those
CAD/CAM systems that do support the design and manufacture of
3D multi-layer weaves are often limited to manual editing of design
paper grids on the computer display and weave retrieval from stored
archives. This complex design activity is time-consuming, tedious
and error-prone and requires considerable experience and skill of a
technical weaver. Recent research reported in the literature has
addressed some of the shortcomings of commercial 3D multi-layer
weave CAD/CAM systems. However, earlier research results have
shown the need for further work on weave specification, weave
generation, yarn path editing and layer binding. Analysis of 3D
multi-layer weaves in this research has led to the design and
development of efficient and robust algorithms for the CAD/CAM of
3D woven multi-layer textile structures. The resulting algorithmically
generated weave designs can be used as a basis for lifting plans that
can be loaded onto looms equipped with electronic shedding
mechanisms for the CAM of 3D woven multi-layer textile structures.
Abstract: In article are analyzed value of audiovisual sources which possesses high integrative potential and allows studying movement of information in the history - information movement from generation to the generation, in essence providing continuity of historical development and inheritance of traditions. Information thus fixed in them is considered as a source not only about last condition of society, but also significant for programming of its subsequent activity.