Abstract: Nothing that an effective cure for infertility happens
when we can find a unique solution, a great deal of study has been
done in this field and this is a hot research subject for to days study.
So we could analyze the men-s seaman and find out about fertility
and infertility and from this find a true cure for this, since this will be
a non invasive and low risk procedure, it will be greatly welcomed.
In this research, the procedure has been based on few Algorithms
enhancement and segmentation of images which has been done on
the images taken from microscope in different fertility institution and
have obtained a suitable result from the computer images which in
turn help us to distinguish these sperms from fluids and its
surroundings.
Abstract: The waverider is proved to be a remarkably useful
configuration for hypersonic glide vehicle (HGV) in terms of the high
lift-to-drag ratio. Due to the severe aerodynamic heating and the
processing technical restriction, the sharp leading edge of waverider
should be blunted, and then the flow characteristics and the
aerodynamic performance along the trajectory will change. In this
paper, the flow characteristics of a HGV, including the rarefied gas
effect and transition phenomenon, were studied based on a reference
trajectory. A numerical simulation was carried out to study the
performance of the HGV under a typical condition.
Abstract: The rangelands, as one of the largest dynamic biomes
in the world, have very capabilities. Regulation of greenhouse gases
in the Earth's atmosphere, particularly carbon dioxide as the main
these gases, is one of these cases. The attention to rangeland, as
cheep and reachable resources to sequestrate the carbon dioxide,
increases after the Industrial Revolution. Rangelands comprise the
large parts of Iran as a steppic area. Rudshur (Saveh), as area index of
steppic area, was selected under three sites include long-term
exclosure, medium-term exclosure, and grazable area in order to the
capable of carbon dioxide’s sequestration of dominated species.
Canopy cover’s percentage of two dominated species (Artemisia
sieberi Besser & Stipa barbata Desf) was determined via establishing
of random 1 square meter plot. The sampling of above and below
ground biomass style was obtained by complete random. After
determination of ash percentage in the laboratory; conversion ratio of
plant biomass to organic carbon was calculated by ignition method.
Results of the paired t-test showed that the amount of carbon
sequestration in above ground and underground biomass of Artemisia
sieberi Besser & Stipa barbata Desf is different in three regions. It,
of course, hasn’t any difference between under and surface ground’s
biomass of Artemisia sieberi Besser in long-term exclosure. The
independent t-test results indicate differences between underground
biomass corresponding each other in the studied sites. Carbon
sequestration in the Stipa barbata Desf was totally more than
Artemisia sieberi Besser. Altogether, the average sequestration of the
long-term exclosure was 5.842gr/m², the medium-term exclosure was
4.115gr/m², and grazable area was 5.975gr/m² so that there isn’t
valuable statistical difference in term of total amount of carbon
sequestration to three sites.
Abstract: Clinically, chickens showed progressively developed
clinical signs represented by sever cyanosis of the comb and wattles
with hemorrhage at the shanks, depression, and ruffling feathers with
loss of appetite and high daily mortalities. The ducks showed severe
neurological signs as torticollus, seizures and inability to stand with
mild signs of diarrhea and depression. Grossly, chickens showed
hemorrhages and congestion in most of the organs particularly lung,
liver, spleen, trachea and kidney. The examined ducks showed
multiple petechial hemorrhages, multifocal hemorrhagic necrosis in
the pancreas, pulmonary edema, congestion and hemorrhage in
meninges and congestion in the skeletal muscles. Histopathology
revealed severe congestion and hemorrhages in most of the organs
particularly lung, liver and kidney. Microscopic erosive tracheitis,
sever pulmonary congestion and perivascular oedema and lymphogranulocytic
pneumonia were constant. The liver showed hepatocyts
necrosis and lympho-granulocytic infiltration. The kidney showed
renal tubular necrosis and diffuse congestion. Multifocal, neuronal
necrosis, hemorrhages, multifocal glial nodules, lympho- histiocytic
perivascular cuffing, and occasional neuronophagia were observed in
the cerebrum. Other organs showed moderate changes.
Abstract: We present a simulation and realization of a battery
charge regulator (BCR) in microsatellite earth observation. The tests
were performed on battery pack 12volt, capacity 24Ah and the solar array open circuit voltage of 100 volt and optimum power of about
250 watt. The battery charge is made by solar module. The principle is to adapt the output voltage of the solar module to the battery by
using the technique of pulse width modulation (PWM). Among the different techniques of charge battery, we opted for the technique of
the controller ON/OFF is a standard technique and simple, it-s easy to
be board executed validation will be made by simulation "Proteus Isis
Professional software ". The circuit and the program of this prototype
are based on the PIC16F877 microcontroller, a serial interface connecting a PC is also realized, to view and save data and graphics
in real time, for visualization of data and graphs we develop an interface tool “visual basic.net (VB)--.
Abstract: Prior to 1975, women in Laos suffered from having
reduced levels of power over decision-making in their families and in
their communities. This has had a negative impact on their ability to
develop their own identities. Their roles were identified as being
responsible for household activities and making preparations for their
marriage. Many women lost opportunities to get educated and access
the outdoor work that might have empowered them to improve their
situations. So far, no accurate figures of either emigrants or return
migrants have been compiled but it appears that most of them were
women, and it was women who most and more frequently remitted
money home. However, very few recent studies have addressed the
relationship between remittances and the roles of women in Laos.
This study, therefore, aims at redressing to some extent the
deficiencies in knowledge. Qualitative techniques were used to gather
data, including individual in-depth interviews and direct observation
in combination with the content analysis method. Forty women in
Vientiane Municipality and Savannakhet province were individually
interviewed. It was found that the monetary remittance was typically
used for family security and well-being; on fungible activities; on
economic and business activities; and on community development,
especially concerning hospitality and providing daily household
necessities. Remittances played important roles in improving many
respondents- livelihoods and positively changed their identities in
families and communities. Women became empowered as they were
able to start commercial businesses, rather than taking care of (just)
housework, children and elders. Interviews indicated that 92.5% of
the respondents their quality of lives improved, 90% felt happier in
their families and 82.5% felt conflicts in their families were reduced.
Abstract: Advances in clinical medical imaging have brought about the routine production of vast numbers of medical images that need to be analyzed. As a result an enormous amount of computer vision research effort has been targeted at achieving automated medical image analysis. Computed Tomography (CT) is highly accurate for diagnosing liver tumors. This study aimed to evaluate the potential role of the wavelet and the neural network in the differential diagnosis of liver tumors in CT images. The tumors considered in this study are hepatocellular carcinoma, cholangio carcinoma, hemangeoma and hepatoadenoma. Each suspicious tumor region was automatically extracted from the CT abdominal images and the textural information obtained was used to train the Probabilistic Neural Network (PNN) to classify the tumors. Results obtained were evaluated with the help of radiologists. The system differentiates the tumor with relatively high accuracy and is therefore clinically useful.
Abstract: The aim of this study was to screen for
microorganism that able to utilize 3-N-trimethylamino-1-propanol
(homocholine) as a sole source of carbon and nitrogen. The aerobic
degradation of homocholine has been found by a gram-positive
Rhodococcus sp. bacterium isolated from soil. The isolate was
identified as Rhodococcus sp. strain A4 based on the phenotypic
features, physiologic and biochemical characteristics, and
phylogenetic analysis. The cells of the isolated strain grown on both
basal-TMAP and nutrient agar medium displayed elementary
branching mycelia fragmented into irregular rod and coccoid
elements. Comparative 16S rDNA sequencing studies indicated that
the strain A4 falls into the Rhodococcus erythropolis subclade and
forms a monophyletic group with the type-strains of R. opacus, and
R. wratislaviensis. Metabolites analysis by capillary electrophoresis,
fast atom bombardment-mass spectrometry, and gas
chromatography- mass spectrometry, showed trimethylamine (TMA)
as the major metabolite beside β-alanine betaine and
trimethylaminopropionaldehyde. Therefore, the possible degradation
pathway of trimethylamino propanol in the isolated strain is through
consequence oxidation of alcohol group (-OH) to aldehyde (-CHO)
and acid (-COOH), and thereafter the cleavage of β-alanine betaine
C-N bonds yielded trimethylamine and alkyl chain.
Abstract: Safety instrumented systems (SISs) are becoming
increasingly complex and the proportion of programmable electronic
parts is growing. The IEC 61508 global standard was established to
ensure the functional safety of SISs, but it was expressed in highly
macroscopic terms. This study introduces an evaluation process for
hardware safety integrity levels through failure modes, effects, and
diagnostic analysis (FMEDA).FMEDA is widely used to evaluate
safety levels, and it provides the information on failure rates and
failure mode distributions necessary to calculate a diagnostic coverage
factor for a given component. In our evaluation process, the
components of the SIS subsystem are first defined in terms of failure
modes and effects. Then, the failure rate and failure mechanism
distribution are assigned to each component. The safety mode and
detectability of each failure mode are determined for each component.
Finally, the hardware safety integrity level is evaluated based on the
calculated results.
Abstract: The study of effect of laser scanning speed on
material efficiency in Ti6Al4V application is very important because unspent powder is not reusable because of high temperature oxygen
pick-up and contamination. This study carried out an extensive study
on the effect of scanning speed on material efficiency by varying the
speed between 0.01 to 0.1m/sec. The samples are wire brushed and
cleaned with acetone after each deposition to remove un-melted
particles from the surface of the deposit. The substrate is weighed before and after deposition. A formula was developed to calculate the
material efficiency and the scanning speed was compared with the
powder efficiency obtained. The results are presented and discussed.
The study revealed that the optimum scanning speed exists for this study at 0.01m/sec, above and below which the powder efficiency
will drop
Abstract: Webcam systems now function as the new privileged
vantage points from which to view the city. This transformation of
CCTV technology from surveillance to promotional tool is significant
because its'scopic regime' presents, back to the public, a new virtual
'site' that sits alongside its real-time counterpart. Significantly,
thisraw 'image' data can, in fact,be co-optedand processed so as to
disrupt their original purpose. This paper will demonstrate this
disruptive capacity through an architectural project. It will reveal how
the adaption the webcam image offers a technical springboard by
which to initiate alternate urban form making decisions and subvert
the disciplinary reliance on the 'flat' orthographic plan. In so doing,
the paper will show how this 'digital material' exceeds the imagistic
function of the image; shiftingit from being a vehicle of signification
to a site of affect.
Abstract: Coronary artery bypass grafts (CABG) are widely
studied with respect to hemodynamic conditions which play
important role in presence of a restenosis. However, papers which
concern with constitutive modeling of CABG are lacking in the
literature. The purpose of this study is to find a constitutive model for
CABG tissue. A sample of the CABG obtained within an autopsy
underwent an inflation–extension test. Displacements were
recoredered by CCD cameras and subsequently evaluated by digital
image correlation. Pressure – radius and axial force – elongation
data were used to fit material model. The tissue was modeled as onelayered
composite reinforced by two families of helical fibers. The
material is assumed to be locally orthotropic, nonlinear,
incompressible and hyperelastic. Material parameters are estimated
for two strain energy functions (SEF). The first is classical
exponential. The second SEF is logarithmic which allows
interpretation by means of limiting (finite) strain extensibility.
Presented material parameters are estimated by optimization based
on radial and axial equilibrium equation in a thick-walled tube. Both
material models fit experimental data successfully. The exponential
model fits significantly better relationship between axial force and
axial strain than logarithmic one.
Abstract: Statistics indicate that more than 1000 phishing attacks are launched every month. With 57 million people hit by the fraud so far in America alone, how do we combat phishing?This publication aims to discuss strategies in the war against Phishing. This study is an examination of the analysis and critique found in the ways adopted at various levels to counter the crescendo of phishing attacks and new techniques being adopted for the same. An analysis of the measures taken up by the varied popular Mail servers and popular browsers is done under this study. This work intends to increase the understanding and awareness of the internet user across the globe and even discusses plausible countermeasures at the users as well as the developers end. This conceptual paper will contribute to future research on similar topics.
Abstract: Main Memory Database systems (MMDB) store their
data in main physical memory and provide very high-speed access.
Conventional database systems are optimized for the particular
characteristics of disk storage mechanisms. Memory resident
systems, on the other hand, use different optimizations to structure
and organize data, as well as to make it reliable.
This paper provides a brief overview on MMDBs and one of the
memory resident systems named FastDB and compares the
processing time of this system with a typical disc resident database
based on the results of the implementation of TPC benchmarks
environment on both.
Abstract: The characterisation of agro-wastes fibres for composite applications from Nigeria using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) has been done. Fibres extracted from groundnut shell, coconut husk, rice husk, palm fruit bunch and palm fruit stalk are processed using two novel cellulose fibre production methods developed by the authors. Cellulose apparent crystallinity calculated using the deconvolution of the diffractometer trace shows that the amorphous portion of cellulose was permeable to hydrolysis yielding high crystallinity after treatment. All diffratograms show typical cellulose structure with well-defined 110, 200 and 040 peaks. Palm fruit fibres had the highest 200 crystalline cellulose peaks compared to others and it is an indication of rich cellulose content. Surface examination of the resulting fibres using SEM indicates the presence of regular cellulose network structure with some agglomerated laminated layer of thin leaves of cellulose microfibrils. The surfaces were relatively smooth indicating the removal of hemicellulose, lignin and pectin.
Abstract: Intrusion Detection Systems are increasingly a key
part of systems defense. Various approaches to Intrusion Detection
are currently being used, but they are relatively ineffective. Artificial
Intelligence plays a driving role in security services. This paper
proposes a dynamic model Intelligent Intrusion Detection System,
based on specific AI approach for intrusion detection. The
techniques that are being investigated includes neural networks and
fuzzy logic with network profiling, that uses simple data mining
techniques to process the network data. The proposed system is a
hybrid system that combines anomaly, misuse and host based
detection. Simple Fuzzy rules allow us to construct if-then rules that
reflect common ways of describing security attacks. For host based
intrusion detection we use neural-networks along with self
organizing maps. Suspicious intrusions can be traced back to its
original source path and any traffic from that particular source will
be redirected back to them in future. Both network traffic and system
audit data are used as inputs for both.
Abstract: Load balancing is the process of improving the
performance of a parallel and distributed system through a
redistribution of load among the processors [1] [5]. In this paper we
present the performance analysis of various load balancing
algorithms based on different parameters, considering two typical
load balancing approaches static and dynamic. The analysis indicates
that static and dynamic both types of algorithm can have
advancements as well as weaknesses over each other. Deciding type
of algorithm to be implemented will be based on type of parallel
applications to solve. The main purpose of this paper is to help in
design of new algorithms in future by studying the behavior of
various existing algorithms.
Abstract: In this study, a 3D combustion chamber was simulated
using FLUENT 6.32. Aims to obtain accurate information about the
profile of the combustion in the furnace and also check the effect of
oxygen enrichment on the combustion process. Oxygen enrichment is
an effective way to reduce combustion pollutant. The flow rate of air
to fuel ratio is varied as 1.3, 3.2 and 5.1 and the oxygen enriched
flow rates are 28, 54 and 68 lit/min. Combustion simulations
typically involve the solution of the turbulent flows with heat
transfer, species transport and chemical reactions. It is common to
use the Reynolds-averaged form of the governing equation in
conjunction with a suitable turbulence model. The 3D Reynolds
Averaged Navier Stokes (RANS) equations with standard k-ε
turbulence model are solved together by Fluent 6.3 software. First
order upwind scheme is used to model governing equations and the
SIMPLE algorithm is used as pressure velocity coupling. Species
mass fractions at the wall are assumed to have zero normal
gradients.Results show that minimum mole fraction of CO2 happens
when the flow rate ratio of air to fuel is 5.1. Additionally, in a fixed
oxygen enrichment condition, increasing the air to fuel ratio will
increase the temperature peak. As a result, oxygen-enrichment can
reduce the CO2 emission at this kind of furnace in high air to fuel
rates.
Abstract: Experimental investigation has been carried out
towards understanding the complex fluid dynamics involved in the
interaction of vortical structures with zero pressure gradient boundary
layer. A laminar boundary layer is produced on the flat plate placed
in the water flume and the synthetic jet actuator is deployed on top of
the plate at a definite distance from the leading edge. The synthetic
jet actuator has been designed in such a way that the to and fro
motion of the diaphragm is maneuvered at will by varying the
operating parameters to produce the typical streamwise vortical
structures namely hairpin and tilted vortices. PIV measurements are
made on the streamwise plane normal to the plate to evaluate their
interaction with the near wall fluid.
Abstract: Mammography is the most effective procedure for an
early diagnosis of the breast cancer. Nowadays, people are trying to
find a way or method to support as much as possible to the
radiologists in diagnosis process. The most popular way is now being
developed is using Computer-Aided Detection (CAD) system to
process the digital mammograms and prompt the suspicious region to
radiologist. In this paper, an automated CAD system for detection
and classification of massive lesions in mammographic images is
presented. The system consists of three processing steps: Regions-Of-
Interest detection, feature extraction and classification. Our CAD
system was evaluated on Mini-MIAS database consisting 322
digitalized mammograms. The CAD system-s performance is
evaluated using Receiver Operating Characteristics (ROC) and Freeresponse
ROC (FROC) curves. The archived results are 3.47 false
positives per image (FPpI) and sensitivity of 85%.