Abstract: A noble low NOx combustion technology, based on
partial oxidation combustion concept in a fuel rich combustion zone, is
successfully applied in this research. The burner is designed such that
a portion of fuel is heated and pre-vaporized in the furnace then
injected into a fuel rich combustion zone so that a partial oxidation
reaction occurs. The effects of equivalence ratio, thermal load, and
fuel distribution ratio on the emissions of NOx and CO are
experimentally investigated. This newly developed combustion
technology showed very low NOx emission level, about 12 ppm, when
light oil is used as a fuel.
Abstract: The North-eastern part of India, which receives
heavier rainfall than other parts of the subcontinent, is of great
concern now-a-days with regard to climate change. High intensity
rainfall for short duration and longer dry spell, occurring due to
impact of climate change, affects river morphology too. In the present
study, an attempt is made to delineate the North-eastern region of
India into some homogeneous clusters based on the Fuzzy Clustering
concept and to compare the resulting clusters obtained by using
conventional methods and nonconventional methods of clustering.
The concept of clustering is adapted in view of the fact that, impact
of climate change can be studied in a homogeneous region without
much variation, which can be helpful in studies related to water
resources planning and management. 10 IMD (Indian Meteorological
Department) stations, situated in various regions of the North-east,
have been selected for making the clusters. The results of the Fuzzy
C-Means (FCM) analysis show different clustering patterns for
different conditions. From the analysis and comparison it can be
concluded that nonconventional method of using GCM data is
somehow giving better results than the others. However, further
analysis can be done by taking daily data instead of monthly means to
reduce the effect of standardization.
Abstract: Human movement in the real world provides
important information for developing human behaviour models and
simulations. However, it is difficult to assess ‘real’ human behaviour
since there is no established method available. As part of the AUNTSUE
(Accessibility and User Needs in Transport – Sustainable Urban
Environments) project, this research aimed to propose a method to
assess human movement and behaviour in crowded areas. The
method is based on the three major steps of video recording,
conceptual behavior modelling and video analysis. The focus is on
individual human movement and behaviour in normal situations
(panic situations are not considered) and the interactions between
individuals in localized areas. Emphasis is placed on gaining
knowledge of characteristics of human movement and behaviour in
the real world that can be modelled in the virtual environment.
Abstract: Identification and selection of appropriate product and
manufacturing technologies are key factors for competitiveness and
market success of technology-based companies. Therefore, many
companies perform technology intelligence (TI) activities to ensure
the identification of evolving technologies at the right time.
Technology monitoring is one of the three base activities of TI,
besides scanning and scouting.
As the technological progress is accelerating, more and more
technologies are being developed. Against the background of limited
resources it is therefore necessary to focus TI activities. In this paper
we propose a concept for defining appropriate search fields for
technology monitoring. This limitation of search space leads to more
concentrated monitoring activities. The concept will be introduced
and demonstrated through an anonymized case study conducted
within an industry project at the Fraunhofer Institute for Production
Technology IPT.
The described concept provides a customized monitoring
approach, which is suitable for use in technology-oriented companies.
It is shown in this paper that the definition of search fields and search
tasks are suitable methods to define topics of interest and thus to
align monitoring activities. Current as well as planned product,
production and material technologies and existing skills, capabilities
and resources form the basis for derivation of relevant search areas.
To further improve the concept of technology monitoring the
proposed concept should be extended during future research e.g. by
the definition of relevant monitoring parameters.
Abstract: Online forum is part of a Learning Management
System (LMS) environment in which students share their opinions.
This study attempts to investigate the perceptions of students towards
online forum and their patterns of listening behavior during the forum
interaction. The students’ perceptions were measured using a
questionnaire, in which seven dimensions were used involving online
experience, benefits of forum participation, cost of participation,
perceived ease of use, usefulness, attitude, and intention. Meanwhile,
their patterns of listening behaviors were obtained using the log file
extracted from the LMS. A total of 25 postgraduate students
undertaking a course were involved in this study, and their activities
in the forum session were recorded by the LMS and used as a log file.
The results from the questionnaire analysis indicated that the students
perceived that the forum is easy to use, useful, and bring benefits to
them. Also, they showed positive attitude towards online forum, and
they have the intention to use it in future. Based on the log data, the
participants were also divided into six clusters of listening behavior,
in which they are different in terms of temporality, breadth, depth and
speaking level. The findings were compared to previous clusters
grouping and future recommendations are also discussed.
Abstract: A relationship between face and signature biometrics
is established in this paper. A new approach is developed to predict
faces from signatures by using artificial intelligence. A multilayer
perceptron (MLP) neural network is used to generate face details
from features extracted from signatures, here face is the physical
biometric and signatures is the behavioural biometric. The new
method establishes a relationship between the two biometrics and
regenerates a visible face image from the signature features.
Furthermore, the performance efficiencies of our new technique are
demonstrated in terms of minimum error rates compared to published
work.
Abstract: Age ratings are very helpful in providing parents with
relevant information for the purchase and use of digital technologies
by the children; this is why the non-definition of age ratings for the
use of ICTs by children in schools is a major concern; and this
problem serves as a motivation for this study whose aim is to
examine the factors affecting the perceptions of educators on the
learners’ youngest age for the introduction of ICTs in schools. This
aim is achieved through two types of research objectives: the
identification and design of theories and models on age ratings, and
the empirical testing of such theories and models in a survey of
educators from the Camperdown district of the South African
KwaZulu-Natal province. A questionnaire is used for the collection
of the data of this survey whose validity and reliability is checked in
SPSS prior to its descriptive and correlative quantitative analysis. The
main hypothesis supporting this research is the association between
the demographics of educators, their personality, and their
perceptions on the learners’ youngest age for the introduction of ICTs
in schools; as claimed by existing research; except that the present
study looks at personality from three dimensions: self-actualized
personalities, fully functioning personalities, and healthy
personalities. This hypothesis was fully confirmed by the empirical
study conducted by this research except for the demographic factor
where only the educators’ grade or class was found to be associated
with the personality of educators.
Abstract: reliability-based methodology for the assessment
and evaluation of reinforced concrete (R/C) structural elements of
concrete structures is presented herein. The results of the reliability
analysis and assessment for R/C structural elements were verified by
the results obtained through deterministic methods. The outcomes of
the reliability-based analysis were compared against currently
adopted safety limits that are incorporated in the reliability indices
β’s, according to international standards and codes. The methodology
is based on probabilistic analysis using reliability concepts and
statistics of the main random variables that are relevant to the subject
matter, and for which they are to be used in the performance-function
equation(s) associated with the structural elements under study.
These methodology techniques can result in reliability index β, which
is commonly known as the reliability index or reliability measure
value that can be utilized to assess and evaluate the safety, human
risk, and functionality of the structural component. Also, these
methods can result in revised partial safety factor values for certain
target reliability indices that can be used for the purpose of
redesigning the R/C elements of the building and in which they could
assist in considering some other remedial actions to improve the
safety and functionality of the member.
Abstract: In the culture of Thailand, the Yak serve as a mediated
icon representing strength, power, and mystical protection not only
for the Buddha, but for population of worshipers. Originating from
the forests of China, the Yak continues to stand guard at the gates of
Buddhist temples. The Yak represents Thai culture in the hearts of
Thai people. This paper presents a qualitative study regarding the
curious mix of media, culture, and religion that projects the Yak of
Thailand as a larger than life message throughout the political,
cultural, and religious spheres. The gate guardians, or gods as they
are sometimes called, appear throughout the religious temples of
Asian cultures. However, the Asian cultures demonstrate differences
in artistic renditions (or presentations) of such sentinels. Thailand
gate guards (the Yak) stand in front of many Buddhist temples, and
these iconic figures display unique features with varied symbolic
significance. The temple (or wat), plays a vital role in every
community; and, for many people, Thailand’s temples are the
country’s most endearing sights. The authors applied folknography as
a methodology to illustrate the importance of the Thai Yak in serving
as meaningful icons that transcend not only time, but the culture,
religion, and mass media. The Yak represents mythical, religious,
artistic, cultural, and militaristic significance for the Thai people.
Data collection included interviews, focus groups, and natural
observations. This paper summarizes the perceptions of the Thai
people concerning their gate sentries and the relationship,
communication, connection, and the enduring respect that Thai
people hold for their guardians of the gates.
Abstract: The main aim of this research was to investigate the
perspectives of English language teachers and learners on the effect
of test techniques on reading comprehension, test performance and
assessment. The research has also aimed at finding the differences
between teacher and learner perspectives, specifying the test
techniques which have the highest effect, investigating the other
factors affecting reading comprehension, and comparing the results
with the similar studies. In order to achieve these objectives,
perspectives and findings of different researchers were reviewed, two
different questionnaires were prepared to collect data for the
perspectives of teachers and learners, the questionnaires were applied
to 26 learners and 8 teachers from the University of Batna (Algeria),
and quantitative and qualitative data analysis of the results were
done. The results and analysis of the results show that different test
techniques affect reading comprehension, test performance and
assessment at different percentages rates.
Abstract: The present study debates students’ perceptions of the
use of technology in learning English as a Foreign Language. Its aim
is to explore and understand students’ preparation and presentation of
Posters, PowerPoint and Animated Videos by drawing attention to
visual and oral elements. The data is collected through observations
and semi-structured interviews and analyzed through
phenomenological data analysis steps. The themes emerged from the
data, visual learning satisfaction in using information and
communication technology, providing structure to oral presentation,
learning from peers’ presentations, draw attention to using Posters,
PowerPoint and Animated Videos as each supports visual learning
and organization of thoughts in oral presentations.
Abstract: The effect of trucks on the level of service is
determined by considering passenger car equivalents (PCE) of trucks.
The current version of Highway Capacity Manual (HCM) uses a
single PCE value for all tucks combined. However, the composition
of truck traffic varies from location to location; therefore, a single
PCE value for all trucks may not correctly represent the impact of
truck traffic at specific locations. Consequently, present study
developed separate PCE values for single-unit and combination
trucks to replace the single value provided in the HCM on different
freeways. Site specific PCE values, were developed using concept of
spatial lagging headways (that is the distance between rear bumpers
of two vehicles in a traffic stream) measured from field traffic data.
The study used data from four locations on a single urban freeway
and three different rural freeways in Indiana. Three-stage-leastsquares
(3SLS) regression techniques were used to generate models
that predicted lagging headways for passenger cars, single unit trucks
(SUT), and combination trucks (CT). The estimated PCE values for
single-unit and combination truck for basic urban freeways (level
terrain) were: 1.35 and 1.60, respectively. For rural freeways the
estimated PCE values for single-unit and combination truck were:
1.30 and 1.45, respectively. As expected, traffic variables such as
vehicle flow rates and speed have significant impacts on vehicle
headways. Study results revealed that the use of separate PCE values
for different truck classes can have significant influence on the LOS
estimation.
Abstract: Information and Communication Technologies (ICTs)
are pervasive nowadays, including in education where they are
expected to improve the performance of learners. However, the hope
placed in ICTs to find viable solutions to the problem of poor
academic performance in schools in the developing world has not yet
yielded the expected benefits. This problem serves as a motivation to
this study whose aim is to examine the perceptions of educators on
the advantages and disadvantages of e-learning. This aim will be
subdivided into two types of research objectives. Objectives on the
identification and design of theories and models will be achieved
using content analysis and literature review. However, the objective
on the empirical testing of such theories and models will be achieved
through the survey of educators from different schools in the
Pinetown District of the South African Kwazulu-Natal province.
SPSS is used to quantitatively analyse the data collected by the
questionnaire of this survey using descriptive statistics and Pearson
correlations after assessing the validity and the reliability of the data.
The main hypothesis driving this study is that there is a relationship
between the demographics of educators’ and their adherence to
learning theories on one side, and their perceptions on the advantages
and disadvantages of e-learning on the other side, as argued by
existing research; but this research views these learning theories
under three perspectives: educators’ adherence to self-regulated
learning, to constructivism, and to progressivism. This hypothesis
was fully confirmed by the empirical study except for the
demographic factor where teachers’ level of education was found to
be the only demographic factor affecting the perceptions of educators
on the advantages and disadvantages of e-learning.
Abstract: The article presents the concept of an electromagnetic
circuit generator with permanent magnets mounted on the surface
rotor core designed for single phase work. Computation field-circuit
model was shown. The spectrum of time course of voltages in the
idle work was presented. The cross section with graphically
presentation of magnetic induction in particular parts of
electromagnetic circuits was presented. Distribution of magnetic
induction at the rated load point for each phase was shown. The time
course of voltages and currents for each phases for rated power were
displayed. An analysis of laboratory results and measurement of load
characteristics of the generator was discussed. The work deals with
three electromagnetic circuits of generators with permanent magnet
where output voltage characteristics versus rated power were
expressed.
Abstract: The purpose of this research is to study of consumer
perception and understanding consumer buying behavior that related
between satisfied and factors affecting the purchasing. Methodology
can be classified between qualitative and quantitative approaches for
the qualitative research were interviews from middlemen who bought
organic vegetables, and middlemen related to production and
marketing system. A questionnaire was utilized as a tool to collect
data. Statistics utilized in this research included frequency,
percentage, mean, standard deviation, and multiple regression
analysis. The result show the reason to decision buying motives is
Fresh products of organic vegetables is the most significant factor on
individuals’ income, with a b of –.143, t = –2.470, the price of
organic vegetables is the most significant factor on individuals’
income, with a b of .176, t = 2.561, p value = .011. The results show
that most people with higher income think about the organic products
are expensive and have negative attitudes towards organic vegetable
as individuals with low and medium income level. Therefore,
household income had a significant influence on the purchasing
decision.
Abstract: The success of any retail business is predisposed by its
swift response and its knack in understanding the constraints and the
requirements of customers. In this paper a conceptual design model
of an automated customer-friendly supermarket has been proposed.
In this model a 10-sided, space benefited, regular polygon shaped
gravity shelves have been designed for goods storage and effective
customer-specific algorithms have been built-in for quick automatic
delivery of the randomly listed goods. The algorithm is developed
with two main objectives, viz., delivery time and priority. For
meeting these objectives the randomly listed items are reorganized
according to the critical-path of the robotic arm specific to the
identified shop and its layout and the items are categorized according
to the demand, shape, size, similarity and nature of the product for an
efficient pick-up, packing and delivery process. We conjectured that
the proposed automated supermarket model reduces business
operating costs with much customer satisfaction warranting a winwin
situation.
Abstract: In this work, we propose the application of Japanese
“Origami” art for a floating function of a small aerial vehicle such as a
hexarotor. A preliminary experiment was conducted using Origami
magic balls mounted under a hexarotor. This magic ball can expand
and shrink using an air pump during free flying. Using this interesting
and functional concept, it promises to reduce the resistance of wind as
well as reduce the energy consumption when the Origami balls are
deflated. This approach can be particularly useful in rescue emergency
situations. Furthermore, there are many unexpected reasons that may
cause the multi-rotor has to land on the surface of water due to
problems with the communication between the aircraft and the ground
station. In addition, a complementary experiment was designed to
prove that the hexarotor can fly maintaining the stability and also,
takes off and lands on the surface of water using air balloons.
Abstract: Pollution of the Klip River has caused
microorganisms inhabiting it to develop protective survival
mechanisms. This study isolated and characterized the heavy metal
resistant bacteria in the Klip River. Water and sediment samples were
collected from six sites along the course of the river. The pH,
turbidity, salinity, temperature and dissolved oxygen were measured
in-situ. The concentrations of six heavy metals (Cd, Cu, Fe, Ni, Pb
and Zn) of the water samples were determined by atomic absorption
spectroscopy. Biochemical and antibiotic profiles of the isolates were
assessed using the API 20E® and Kirby Bauer Method. Growth
studies were carried out using spectrophotometric methods. The
isolates were identified using 16SrDNA sequencing. The uppermost
part of the Klip River with the lowest pH had the highest levels of
heavy metals. Turbidity, salinity and specific conductivity increased
measurably at Site 4 (Henley on Klip Weir). MIC tests showed that
16 isolates exhibited high iron and lead resistance. Antibiotic
susceptibility tests revealed that the isolates exhibited multitolerances
to drugs such as Tetracycline, Ampicillin, and
Amoxicillin.
Abstract: This paper presents general results on the Java source
code snippet detection problem. We propose the tool which uses
graph and subgraph isomorphism detection. A number of solutions
for all of these tasks have been proposed in the literature. However,
although that all these solutions are really fast, they compare just the
constant static trees. Our solution offers to enter an input sample
dynamically with the Scripthon language while preserving an
acceptable speed. We used several optimizations to achieve very low
number of comparisons during the matching algorithm.
Abstract: Access control is one of the most challenging issues
facing information security. Access control is defined as, the ability to
permit or deny access to a particular computational resource or digital
information by an unauthorized user or subject. The concept of usage
control (UCON) has been introduced as a unified approach to capture a
number of extensions for access control models and systems. In
UCON, an access decision is determined by three factors:
authorizations, obligations and conditions. Attribute mutability and
decision continuity are two distinct characteristics introduced by
UCON for the first time. An observation of UCON components
indicates that, the components are predefined and static. In this paper,
we propose a new and flexible model of usage control for the creation
and elimination of some of these components; for example new
objects, subjects, attributes and integrate these with the original
UCON model. We also propose a model for concurrent usage
scenarios in UCON.