Impact of Vehicle Travel Characteristics on Level of Service: A Comparative Analysis of Rural and Urban Freeways

The effect of trucks on the level of service is
determined by considering passenger car equivalents (PCE) of trucks.
The current version of Highway Capacity Manual (HCM) uses a
single PCE value for all tucks combined. However, the composition
of truck traffic varies from location to location; therefore, a single
PCE value for all trucks may not correctly represent the impact of
truck traffic at specific locations. Consequently, present study
developed separate PCE values for single-unit and combination
trucks to replace the single value provided in the HCM on different
freeways. Site specific PCE values, were developed using concept of
spatial lagging headways (that is the distance between rear bumpers
of two vehicles in a traffic stream) measured from field traffic data.
The study used data from four locations on a single urban freeway
and three different rural freeways in Indiana. Three-stage-leastsquares
(3SLS) regression techniques were used to generate models
that predicted lagging headways for passenger cars, single unit trucks
(SUT), and combination trucks (CT). The estimated PCE values for
single-unit and combination truck for basic urban freeways (level
terrain) were: 1.35 and 1.60, respectively. For rural freeways the
estimated PCE values for single-unit and combination truck were:
1.30 and 1.45, respectively. As expected, traffic variables such as
vehicle flow rates and speed have significant impacts on vehicle
headways. Study results revealed that the use of separate PCE values
for different truck classes can have significant influence on the LOS
estimation.

• Anwaar Ahmed
• Muhammad Bilal Khurshid
• Samuel Labi

• Level of Service
• Capacity Analysis
• Lagging Headway.

[1] Highway Research Board “Highway Capacity Manual: Practical
Applications for Research, Department of Traffic and Operations,
Committee on Highway Capacity, United States Government Printing
Office, Washington, DC., 1950.
[2] Highway Research Board, “Special Report 87, Highway Capacity
Manual”, National Research Council, Department of Traffic and
Operations, Committee on Highway Capacity, Washington, D.C., 1965.
[3] E. Linzer, R. Roess, and W. McShane, “Effect of Trucks, Buses, and
Recreational Vehicles on Freeway Capacity and Service Volume”
Transportation Research Record No. 699, National Research Council,
Washington, DC., pp. 17-24, 1979.
[4] Transportation Research Board “Highway Capacity Manual 2000”.
TRB, National Research Council, Washington, DC. 2000.
[5] A. Ahmed, M. Volovski, D. VanBoxel, S. Labi, and K. C. Sinha, “Truck
Travel Characteristics as an Indicator of System Condition and
Performance”, Final Report, Purdue University, West Lafayette, Indiana,
USA, 2011.
[6] A. Werner, J. and Morrall “Passenger Car Equivalencies of Trucks,
Buses, and Recreational Vehicles for Two-Lane Rural Highways”
Transportation Research Record No. 615. National Research Council,
Washington, D. C., pp. 10-17, 1976.
[7] E. Seguin, K. Crowley, and W. Zweig. “Passenger Car Equivalents on
Urban Freeways.” Report DTFH61-80-C-00106. State College, PA:
Institute for Research, 1982.
[8] W. D. Cunagin, and C. J. Messer, “Passenger Car Equivalents for Rural
Highways” Transportation Research Record No., 905, pp. 61–68, 1983.
[9] L. Elefteriadou, D. Torbic, and N. Webster, “Development of Passenger
Car Equivalents for Freeways, Two-Lane Highways, and Arterials”
Transportation Research Record No. 1572(1), pp. 51–58, 1997.
[10] D. V. Van Boxel, K. C. Sinha, M. B. Darcy and F. L. Mannering “An
Exploratory Study of Vehicle Class Headway Ratios as Passenger Car
Equivalence Values Using Three Stage Least Squares Estimation”, in
Proc. 89thAnnual Meeting of Transportation Research Board,
Washington, D.C., 2009.
[11] S. Washington, M. Karlaftis, and F. Mannering. “Statistical and
Econometric Methods for Transportation Data Analysis”. CRC Press,
2000.
[12] A. Ahmed, D. VanBoxel, M. Volovski, P. Ch. Anastasopoulos, S. Labi,
and and K. C. Sinha. “Using Lagging Headways to Estimate Passenger
Car Equivalents on Basic Freeway Sections” Journal of Transportation
of the Institute of Transportation Engineers vol. 2 (1), Oct. 2011, pp. 1-
17.