Abstract: The electrokinetic flow resistance (electroviscous
effect) is predicted for steady state, pressure-driven liquid flow at
low Reynolds number in a microfluidic contraction of rectangular
cross-section. Calculations of the three dimensional flow are
performed in parallel using a finite volume numerical method. The
channel walls are assumed to carry a uniform charge density and the
liquid is taken to be a symmetric 1:1 electrolyte. Predictions are
presented for a single set of flow and electrokinetic parameters. It is
shown that the magnitude of the streaming potential gradient and the
charge density of counter-ions in the liquid is greater than that in
corresponding two-dimensional slit-like contraction geometry. The
apparent viscosity is found to be very close to the value for a
rectangular channel of uniform cross-section at the chosen Reynolds
number (Re = 0.1). It is speculated that the apparent viscosity for the
contraction geometry will increase as the Reynolds number is
reduced.
Abstract: Rainfall records of rainfall station including the
rainfall potential per hour and rainfall mass of five heavy storms are
explored, respectively from 2001 to 2010. The rationalization formula
is to investigate the capability of flood peak duration of flood
detention pond in different rainfall conditions. The stable flood
detention model is also proposed by using system dynamic control
theory to get the message of flood detention pond in this research.
When rainfall frequency of one hour rainfall duration is more than
100-year frequency which exceeds the flood detention standard of
20-year frequency for the flood detention pond, the flood peak
duration of flood detention pond is 1.7 hours at most even though the
flood detention pond with maximum drainage potential about 15.0
m3/s of pumping system is constructed. If the rainfall peak current is
more than maximum drainage potential, the flood peak duration of
flood detention pond is about 1.9 hours at most. The flood detention
pond is the key factor of stable drainage control and flood prevention.
The critical factors of flood disaster is not only rainfall mass, but also
rainfall frequency of heavy storm in different rainfall duration and
flood detention frequency of flood detention system.
Abstract: Turbine blade cooling is considered as the most
effective way of maintaining high operating temperature making use
of the available materials, and turbine systems with wet compression
have a potential for future power generation because of high efficiency
and high specific power with a relatively low cost. In this paper
performance analysis of wet-compression gas turbine cycle with
turbine blade cooling is carried out. The wet compression process is
analytically modeled based on non-equilibrium droplet evaporation.
Special attention is paid for the effects of pressure ratio and water
injection ratio on the important system variables such as ratio of
coolant fluid flow, fuel consumption, thermal efficiency and specific
power. Parametric studies show that wet compression leads to
insignificant improvement in thermal efficiency but significant
enhancement of specific power in gas turbine systems with turbine
blade cooling.
Abstract: Rainbow trout homogametic males, (XX or YY sex genotype), can be obtained, respectively, through masculinisation of genetic females or induced androgenesis. Aim of this study was to compare reproductive potential of neo-males (XX) and super-males (YY) with heterogametic males (XY). We measured spermatozoa motility parameters, sperm concentration, osmolality and characterized protein profiles in samples of stripped and testicular sperm obtained from XY and YY males, and testicular sperm of XX males. The motile spermatozoa, as measured by both subjective method and CASA, showed no differences between testicular sperm of XX males and stripped sperm of XY and YY males whereas testicular sperm of XY and YY males had significantly lower sperm motility. Result of protein densitometry showed similarities in protein profile between seminal plasma of XY and YY males and testicular fluids of XX males. Testis of XX males showed specific histological structures of cysts consists hypertrophied Sertoli cells.
Abstract: Fuzzy controllers are potential candidates for the
control of nonlinear, time variant and also complicated systems. Anti
lock brake system (ABS) which is a nonlinear system, may not be
easily controlled by classical control methods. An intelligent Fuzzy
control method is very useful for this kind of nonlinear system. A
typical antilock brake system (ABS) by sensing the wheel lockup,
releases the brakes for a short period of time, and then reapplies again
the brakes when the wheel spins up. In this paper, an intelligent fuzzy
ABS controller is designed to adjust slipping performance for variety
of roads. There are tow major sections in the proposing control
system. First section consists of tow Fuzzy-Logic Controllers (FLC)
providing optimal brake torque for both front and rear wheels.
Second section which is also a FLC provides required amount of slip
and torque references properties for different kind of roads.
Simulation results of our proposed intelligent ABS for three different
kinds of road show more reliable and better performance in compare
with two other break systems.
Abstract: The application of agro-industrial waste in Aluminum
Metal Matrix Composites has been getting more attention as they
can reinforce particles in metal matrix which enhance the strength
properties of the composites. In addition, by applying these agroindustrial
wastes in useful way not only save the manufacturing cost
of products but also reduce the pollutions on environment. This
paper represents a literature review on a range of industrial wastes
and their utilization in metal matrix composites. The paper describes
the synthesis methods of agro-industrial waste filled metal matrix
composite materials and their mechanical, wear, corrosion, and
physical properties. It also highlights the current application and
future potential of agro-industrial waste reinforced composites in
aerospace, automotive and other construction industries.
Abstract: Detection of human emotions has many potential applications. One of application is to quantify attentiveness audience in order evaluate acoustic quality in concern hall. The subjective audio preference that based on from audience is used. To obtain fairness evaluation of acoustic quality, the research proposed system for multimodal emotion detection; one modality based on brain signals that measured using electroencephalogram (EEG) and the second modality is sequences of facial images. In the experiment, an audio signal was customized which consist of normal and disorder sounds. Furthermore, an audio signal was played in order to stimulate positive/negative emotion feedback of volunteers. EEG signal from temporal lobes, i.e. T3 and T4 was used to measured brain response and sequence of facial image was used to monitoring facial expression during volunteer hearing audio signal. On EEG signal, feature was extracted from change information in brain wave, particularly in alpha and beta wave. Feature of facial expression was extracted based on analysis of motion images. We implement an advance optical flow method to detect the most active facial muscle form normal to other emotion expression that represented in vector flow maps. The reduce problem on detection of emotion state, vector flow maps are transformed into compass mapping that represents major directions and velocities of facial movement. The results showed that the power of beta wave is increasing when disorder sound stimulation was given, however for each volunteer was giving different emotion feedback. Based on features derived from facial face images, an optical flow compass mapping was promising to use as additional information to make decision about emotion feedback.
Abstract: In this paper, we propose a robust disease detection
method, called adaptive orientation code matching (Adaptive OCM),
which is developed from a robust image registration algorithm:
orientation code matching (OCM), to achieve continuous and
site-specific detection of changes in plant disease. We use two-stage
framework for realizing our research purpose; in the first stage,
adaptive OCM was employed which could not only realize the
continuous and site-specific observation of disease development, but
also shows its excellent robustness for non-rigid plant object searching
in scene illumination, translation, small rotation and occlusion changes
and then in the second stage, a machine learning method of support
vector machine (SVM) based on a feature of two dimensional (2D)
xy-color histogram is further utilized for pixel-wise disease
classification and quantification. The indoor experiment results
demonstrate the feasibility and potential of our proposed algorithm,
which could be implemented in real field situation for better
observation of plant disease development.
Abstract: This paper discusses the utilization of marine biomass as an energy resource in Japan. A marine biomass energy system in Japan was proposed consisting of seaweed cultivation (Laminaria japonica) at offshore marine farms, biogas production via methane fermentation of the seaweeds, and fuel cell power generation driven by the generated biogas. We estimated energy output, energy supply potential, and CO2 mitigation in Japan on the basis of the proposed system. As a result, annual energy production was estimated to be 1.02-109 kWh/yr at nine available sites. Total CO2 mitigation was estimated to be 1.04-106 tonnes per annum at the nine sites. However, the CO2 emission for the construction of relevant facilities is not taken into account in this paper. The estimated CO2 mitigation is equivalent to about 0.9% of the required CO2 mitigation for Japan per annum under the Kyoto Protocol framework.
Abstract: Dynamics of a vapour bubble generated due to a high local energy input near a circular thin bronze plate in the absence of the buoyancy forces is numerically investigated in this paper. The bubble is generated near a thin bronze plate and during the growth and collapse of the bubble, it deforms the nearby plate. The Boundary Integral Equation Method is employed for numerical simulation of the problem. The fluid is assumed to be incompressible, irrotational and inviscid and the surface tension on the bubble boundary is neglected. Therefore the fluid flow around the vapour bubble can be assumed as a potential flow. Furthermore, the thin bronze plate is assumed to have perfectly plastic behaviour. Results show that the displacement of the circular thin bronze plate has considerable effect on the dynamics of its nearby vapour bubble. It is found that by decreasing the thickness of the thin bronze plate, the growth and collapse rate of the bubble becomes higher and consequently the lifetime of the bubble becomes shorter.
Abstract: Medical Tourism is a new development in Taiwan
recently. The willingness and barriers of potential tourists from
China to participate medical tourism are studied. A questionnaire
survey is conducted and the SPSS software is used to analyze data.
The results show that under one fifth of respondents express full
medical tourism participation willingness. Among travel barriers
toward medical tourism, “insufficient information of medical tourism
trip", “not enough time", “no companion", “worrying about
unsatisfied itinerary." are perceived the most important barriers.
Abstract: In the proposed method for Web page-ranking, a
novel theoretic model is introduced and tested by examples of order
relationships among IP addresses. Ranking is induced using a
convexity feature, which is learned according to these examples
using a self-organizing procedure. We consider the problem of selforganizing
learning from IP data to be represented by a semi-random
convex polygon procedure, in which the vertices correspond to IP
addresses. Based on recent developments in our regularization
theory for convex polygons and corresponding Euclidean distance
based methods for classification, we develop an algorithmic
framework for learning ranking functions based on a Computational
Geometric Theory. We show that our algorithm is generic, and
present experimental results explaining the potential of our approach.
In addition, we explain the generality of our approach by showing its
possible use as a visualization tool for data obtained from diverse
domains, such as Public Administration and Education.
Abstract: With the intention of screening for heavy metal
tolerance, a number of bacteria were isolated and characterized from
a pristine soil. Two Gram positive isolates were identified as
Paenibacillus sp. and Bacillus thuringeinsis. Tolerance of Cd2+, Cu2+
and Zn2+ by these bacteria was studied and found that both bacteria
were highly sensitive to Cu2+ compared to other two metals. Both
bacteria showed the same pattern of metal tolerance in the order Zn+
> Cd2+ > Cu2+. When the metal tolerance in both bacteria was
compared, Paenibacillus sp. showed the highest sensitivity to Cu2+
where as B. thuringiensis showed highest sensitivity to Cd2+ and Zn2+
.These findings revealed the potential of Paenibacillus sp. in
developing a biosensor to detect Cu2+ in environmental samples.
Abstract: Photoselective plastic films with thermic properties
are now available so that greenhouses clad with such plastics exhibit
a higher degree of “Greenhouse Effect” with a consequent increase in
night time temperature. In this study, we investigate the potential
benefits of a range of thermic plastic films used as greenhouse cover
materials on the vegetative and reproductive growth and development
of Iceberg lettuce (Lactuca sativa L). Transplants were grown under
thermic films and destructively harvested 4, 5, and 6 weeks after
transplanting. Thermic films can increase night temperatures up to 2
⁰C reducing the wide fluctuation in greenhouse temperature during
winter compared to the standard commercial film and consequently
increased the yield (leaf number, fresh weight, and dry weight) of
lettuce plants. Lettuce plants grown under Clear film respond to cold
stress by the accumulation of secondary products (phenolics, and
flavonoids).
Abstract: Wind energy has been shown to be one of the most
viable sources of renewable energy. With current technology, the low
cost of wind energy is competitive with more conventional sources of
energy such as coal. Most blades available for commercial grade
wind turbines incorporate a straight span-wise profile and airfoil
shaped cross sections. These blades are found to be very efficient at
lower wind speeds in comparison to the potential energy that can be
extracted. However as the oncoming wind speed increases the
efficiency of the blades decreases as they approach a stall point. This
paper explores the possibility of increasing the efficiency of the
blades at higher wind speeds while maintaining efficiency at the
lower wind speeds. The design intends to maintain efficiency at
lower wind speeds by selecting the appropriate orientation and size
of the airfoil cross sections based on a low oncoming wind speed and
given constant rotation rate. The blades will be made more efficient
at higher wind speeds by implementing a swept blade profile.
Performance was investigated using the computational fluid
dynamics (CFD).
Abstract: In this study, Li4SiO4 powder was successfully
synthesized via sol gel method followed by drying at 150oC. Lithium
oxide, Li2O and silicon oxide, SiO2 were used as the starting
materials with citric acid as the chelating agent. The obtained powder
was then sintered at various temperatures. Crystallographic phase
analysis, morphology and ionic conductivity were investigated
systematically employing X-ray diffraction, Fourier Transform
Infrared, Scanning Electron Microscopy and AC impedance
spectroscopy. XRD result showed the formation of pure monoclinic
Li4SiO4 crystal structure with lattice parameters a = 5.140 Å, b =
6.094 Å, c = 5.293 Å, β = 90o in the sample sintered at 750oC. This
observation was confirmed by FTIR analysis. The bulk conductivity
of this sample at room temperature was 3.35 × 10-6 S cm-1 and the
highest bulk conductivity of 1.16 × 10-4 S cm-1 was obtained at
100°C. The results indicated that, the Li4SiO4 compound has
potential to be used as host for LISICON structured solid electrolyte
for low temperature application.
Abstract: The main purpose of this research paper was to study
the requirements for human capital development in order to be ready
for ASEAN Community. Thai education institutions are encountering
a challenging course of change to be effective members of ASEAN
Economic Community (AEC) in 2015. It was vital that everyone and
every organization participate in the process of becoming part of the
ASEAN community, a pluralistic society. Thai universities will be
required to partake in the human capital development in a variety of
fields. In order to assist the whole nation to enhance potential
development, there was a need to collaborate with other ASEAN
leading universities to do researches to ameliorate the qualifications
and capabilities of university management, administers, professors,
and staffs.
Abstract: The manufacture of large-scale precision aerospace
components using CNC requires a highly effective maintenance
strategy to ensure that the required accuracy can be achieved over
many hours of production. This paper reviews a strategy for a
maintenance management system based on Failure Mode Avoidance,
which uses advanced techniques and technologies to underpin a
predictive maintenance strategy. It is shown how condition
monitoring (CM) is important to predict potential failures in high
precision machining facilities and achieve intelligent and integrated
maintenance management. There are two distinct ways in which CM
can be applied. One is to monitor key process parameters and
observe trends which may indicate a gradual deterioration of
accuracy in the product. The other is the use of CM techniques to
monitor high status machine parameters enables trends to be
observed which can be corrected before machine failure and
downtime occurs.
It is concluded that the key to developing a flexible and intelligent
maintenance framework in any precision manufacturing operation is
the ability to evaluate reliably and routinely machine tool condition
using condition monitoring techniques within a framework of Failure
Mode Avoidance.
Abstract: Nagaland, the 16th state of India in order of
statehood, is situated between 25° 6' and 27° 4' latitude north and
between 93º 20' E and 95º 15' E longitude of equator in the North
Eastern part of the India. Endowed with varied topography, soil and
agro climatic conditions it is known for its potentiality to grow all
most all kinds of horticultural crops. Pineapple being grown since
long organically by default is one of the most promising crops of the
state with emphasis being laid for commercialization by the
government of Nagaland. In light of commercialization, globalization
and scope of setting small-scale industries, a research study was
undertaken to examine the socio-economic and personal
characteristics, entrepreneurial characteristics and attitude of the
pineapple growers towards improved package of practices of
pineapple cultivation. The study was conducted in Medziphema
block of Dimapur district of the Nagaland state of India following ex
post facto research design. Ninety pineapple growers were selected
from four different villages of Medziphema block based on
proportionate random selection procedure. Findings of the study
revealed that majority of the respondents had medium level of
entrepreneurial characteristics in terms of knowledge level, risk
orientation, self confidence, management orientation, farm decision
making ability and leadership ability and most of them had
favourable attitude towards improved package of practices of
pineapple cultivation. The variables age, education, farm size, risk
orientation, management orientation and sources of information
utilized were found important to influence the attitude of the
respondents. The study revealed that favourable attitude and
entrepreneurial characteristics of the pineapple cultivators might be
harnessed for increased production of pineapple in the state thereby
bringing socio economic upliftment of the marginal and small-scale
farmers.
Abstract: A novel direction-of-arrival (DOA) estimation technique, which uses a conventional multiple signal classification (MUSIC) algorithm with periodic signals, is applied to a single RF-port parasitic array antenna for direction finding. Simulation results show that the proposed method gives high resolution (1 degree) DOA estimation in an uncorrelated signal environment. The novelty lies in that the MUSIC algorithm is applied to a simplified antenna configuration. Only one RF port and one analogue-to-digital converter (ADC) are used in this antenna, which features low DC power consumption, low cost, and ease of fabrication. Modifications to the conventional MUSIC algorithm do not bring much additional complexity. The proposed technique is also free from the negative influence by the mutual coupling between elements. Therefore, the technique has great potential to be implemented into the existing wireless mobile communications systems, especially at the power consumption limited mobile terminals, to provide additional position location (PL) services.