Abstract: The future of Higher Education Institutions (HEI) depend on their ability to attract and retain students, increase recognition and prestige. In order to respond to the 'customers' increasingly demanding, HEI need to identify the key factors that influence the satisfaction of a 'customers', thereby creating competitive advantages. These determinants of satisfaction are important elements that guide the strategy of an institution and allow the successful achievement of strategic plans, both teaching and administrative, to offer their ‘costumers’ services and products with higher quality. Following this way of thinking, the purpose of this study was to evaluate the satisfaction with the service quality of the School of Technology and Management of Bragança (ESTiG), of the Polytechnic Institute of Bragança, identifying, thus, the dimensions related to the quality of services that might influence students' satisfaction. The results showed that, in general, the students are satisfied with the performance of ESTiG.
Abstract: Climate change causes severe effects on natural
habitats, especially wetlands. These challenges require the adaptation
of their management to probable effects of climate change. A
compilation of necessary changes in land management was collected
in a Hungarian area being both national park and Natura 2000 SAC
and SCI site in favor of increasing the resilience and reducing
vulnerability. Several factors, such as ecological aspects, nature
conservation and climatic adaptation should be combined with social
and economic factors during the process of developing climate
change adapted management on vulnerable wetlands. Planning
adaptive management should be determined by a priority order of
conservation aims and evaluation of factors at the determined
planning unit. Mowing techniques, frequency and exact date should
be observed as well as grazing species and their breed, due to
different grazing, group forming and trampling habits. Integrating
landscape history and historical land development into the planning
process is essential.
Abstract: This study had two goals. First, it investigated marital
interaction variables as predictors of treatment outcome in panic
disorder with agoraphobia (PDA) in sixty-five couples with one
spouse suffering from PDA. Second, it analyzed the impact of PDA
improvement, following therapy, on marital interaction patterns of
both spouses. The partners were observed during a problem-solving
task, before and after treatment. Negative behaviors at the outset of
therapy, both in the PDA and the NPDA partners, predicted less
improvement at post-test. It also appears that improvement in some
PDA symptoms following therapy is linked to increase in the
dominant behavior of the NPDA spouse and to an improvement in
terms of his intrusiveness.
Abstract: The cuticular hydrocarbons of Pamphagus elephas
(Orthoptera: Pamphagidae) has been analysed by gas
chromatography and by combined gas chromatograph-mass
spectrometry. The following hydrocarbon classes have been
identified in insect cuticular hydrocarbons are: n-alkanes and
methylalkanes comprising Monomethyl-, dimethyl-and
trimethylalkanes. Sexual dimorphism is observed in long chain
alkanes (C24-C36) present on male and female. The cuticulars
hydrocarbons of P.elephas ranged from 24 to 36 carbons and
incluted n-alkanes, Dimethylalkanes and Trimethylalkanes. nalkanes
represented by (C24-C36,72,7% on male and 79,2% on
female), internally branched Monomethylalkanes identified were
(C25, C30-C32,C35-C37;11% on male and 9,4% on female),
Dimethylalkanes detected are (C31-C32, C36; 2,2% on male and
2,06% on female) and Trimethylalkanes detected are (C32, C36;
3,1% on male and 4, 97 on female). Larvae male and female (stage
7) showed the same quality of n-alkanes observed in adults.
However a difference quantity is noted.
Abstract: This paper presents an innovative computer system
that contributes to sustainable development of the enterprise. The
research refers to a rethinking of traditional systems of collaboration
and risk assessment, present in any organization, leading to a
sustainable enterprise. This concept integrates emerging tools that
allow the implementation and exploitation of the collective
intelligence of the enterprise, allowing the exchange of contextual,
agile and simplified information, and collaboration with networks of
customers and partners in an environment where risks are controlled.
Risk assessment is done in a systemic way: the enterprise as the
system compared to the contained departments and the enterprise as a
subsystem compared to: families of international standards and
sustainability-s responsibilities. The enterprise, in this systemic
vision, responds to the requirements that any existing system to
operate continuously in an indefinite future without reaching key
resource depletion. The research is done by integrating collaborative
science, engineering, management, psychology, obtaining thus a
cornerstone of sustainable development of the enterprise.
Abstract: The research purpose was to evaluate the effect of
Active Imagination Technique (AIT) for bruxism treatment. This
project was approved by the Ethics Committee on Human Research
(CAAE: 05619512.9.0000.0109). Twenty-one volunteers using
interocclusal splint completed the study. Initially they filled in a
questionnaire about their condition, composed of objective questions
on signs and symptoms. Following they were underwent asingle
session of AIT. After 15 days, the volunteers met again the same
initial questionnaire. The results were compared and showed that the
vast majority had pain symptoms, difficulty opening the mouth, pain
when chewing, reduced, some of the participants abandoned the
interocclusal splint during the evaluate period. It is concluded that the
technique can be used in bruxism treatment. Results seem to be
promising and demonstrates the need of highlighting Active
Imagination Technique since it points a possibility of bruxism cure
and that is unprecedented.
Abstract: In this paper, we propose a fast and efficient method for drawing very large-scale graph data. The conventional force-directed method proposed by Fruchterman and Rheingold (FR method) is well-known. It defines repulsive forces between every pair of nodes and attractive forces between connected nodes on a edge and calculates corresponding potential energy. An optimal layout is obtained by iteratively updating node positions to minimize the potential energy. Here, the positions of the nodes are updated every global timestep at the same time. In the proposed method, each node has its own individual time and time step, and nodes are updated at different frequencies depending on the local situation. The proposed method is inspired by the hierarchical individual time step method used for the high accuracy calculations for dense particle fields such as star clusters in astrophysical dynamics. Experiments show that the proposed method outperforms the original FR method in both speed and accuracy. We implement the proposed method on the MDGRAPE-3 PCI-X special purpose parallel computer and realize a speed enhancement of several hundred times.
Abstract: Numerical studies on race car aerodynamics at wing
in ground effect have been carried out using a steady 3d, double
precision, pressure-based, and standard k-epsilon turbulence model.
Through various parametric analytical studies we have observed that
at a particular speed and ground clearance of the wings a favorable
negative lift was found high at a particular angle of attack for all the
physical models considered in this paper. The fact is that if the
ground clearance height to chord length (h/c) is too small, the
developing boundary layers from either side (the ground and the
lower surface of the wing) can interact, leading to an altered variation
of the aerodynamic characteristics at wing in ground effect. Therefore
a suitable ground clearance must be predicted throughout the racing
for a better performance of the race car, which obviously depends
upon the coupled effects of the topography, wing orientation with
respect to the ground, the incoming flow features and/or the race car
speed. We have concluded that for the design of high performance
and high speed race cars the adjustable wings capable to alter the
ground clearance and the angles of attack is the best design option for
any race car for racing safely with variable speeds.
Abstract: With the long-term objective of Critical Heat Flux (CHF) prediction, a Direct Numerical Simulation (DNS) framework for simulation of subcooled and saturated nucleate pool boiling is developed. One case of saturated, and three cases of subcooled boiling at different subcooling levels are simulated. Grid refinement study is also reported. Both boiling and condensation phenomena can be computed simultaneously in the proposed numerical framework. Computed bubble detachment diameters of the saturated nucleate pool boiling cases agree well with the experiment. The flow structures around the growing bubble are presented and the accompanying physics is described. The relation between heat flux evolution from the heated wall and the bubble growth is studied, along with investigations of temperature distribution and flow field evolutions.
Abstract: This paper reported an experimental research of
steady-state heat transfer behaviour of a gas flowing through a fixed
bed under the different operating conditions. Studies had been carried
out in a fixed-bed packed methanol synthesis catalyst percolated by air
at appropriate flow rate. Both radial and axial direction temperature
distribution had been investigated under the different operating
conditions. The effects of operating conditions including the reactor
inlet air temperature, the heating pipe temperature and the air flow rate
on temperature distribution was investigated and the experimental
results showed that a higher inlet air temperature was conducive to
uniform temperature distribution in the fixed bed. A large temperature
drop existed at the radial direction, and the temperature drop increased
with the heating pipe temperature increasing under the experimental
conditions; the temperature profile of the vicinity of the heating pipe
was strongly affected by the heating pipe temperature. A higher air
flow rate can improve the heat transfer in the fixed bed. Based on the
thermal distribution, heat transfer models of the fixed bed could be
established, and the characteristics of the temperature distribution in
the fixed bed could be finely described, that had an important practical
significance.
Abstract: Wireless mesh networks based on IEEE 802.11
technology are a scalable and efficient solution for next generation
wireless networking to provide wide-area wideband internet access to
a significant number of users. The deployment of these wireless mesh
networks may be within different authorities and without any
planning, they are potentially overlapped partially or completely in
the same service area. The aim of the proposed model is design a new
model to Enhancement Throughput of Unplanned Wireless Mesh
Networks Deployment Using Partitioning Hierarchical Cluster
(PHC), the unplanned deployment of WMNs are determinates there
performance. We use throughput optimization approach to model the
unplanned WMNs deployment problem based on partitioning
hierarchical cluster (PHC) based architecture, in this paper the
researcher used bridge node by allowing interworking traffic between
these WMNs as solution for performance degradation.
Abstract: This paper presents an analysis result of relationship
between business and information technology (IT) in business process
reengineering (BPR). 258 Japanese firm-level data collected have been
analyzed using structural equation modeling. This analysis was aimed
to illuminating success factors of achieve effective BPR. Analysis was
focused on management factors (including organizational factors) and
implementing management method (e.g. balanced score card, internal
control, etc.).These results would contribute for achieving effective
BPR by showing effective tasks and environment to be focused.
Abstract: The Taiwan government has started to promote the “Plain Landscape Afforestation and Greening Program" since 2002. A key task of the program was the payment for environmental services (PES), entitled the “Plain Landscape Afforestation Policy" (PLAP), which was certificated by the Executive Yuan on August 31, 2001 and enacted on January 1, 2002. According to the policy, it is estimated that the total area of afforestation will be 25,100 hectares by December 31, 2007. Until the end of 2007, the policy had been enacted for six years in total and the actual area of afforestation was 8,919.18 hectares. Among them, Taiwan Sugar Corporation (TSC) was accounted for 7,960 hectares (with 2,450.83 hectares as public service area) which occupied 86.22% of the total afforestation area; the private farmland promoted by local governments was accounted for 869.18 hectares which occupied 9.75% of the total afforestation area. Based on the above, we observe that most of the afforestation area in this policy is executed by TSC, and the achievement ratio by TSC is better than by others. It implies that the success of the PLAP is seriously related to the execution of TSC. The objective of this study is to analyze the relevant policy planning of TSC's participation in the PLAP, suggest complementary measures, and draw up effective adjustment mechanisms, so as to improve the effectiveness of executing the policy. Our main conclusions and suggestions are summarized as follows: 1. The main reason for TSC’s participation in the PLAP is based on their passive cooperation with the central government or company policy. Prior to TSC’s participation in the PLAP, their lands were mainly used for growing sugarcane. 2. The main factors of TSC's consideration on the selection of tree species are based on the suitability of land and species. The largest proportion of tree species is allocated to economic forests, and the lack of technical instruction was the main problem during afforestation. Moreover, the method of improving TSC’s future development in leisure agriculture and landscape business becomes a key topic. 3. TSC has developed short and long-term plans on participating in the PLAP for the future. However, there is no great willingness or incentive on budgeting for such detailed planning. 4. Most people from TSC interviewed consider the requirements on PLAP unreasonable. Among them, an unreasonable requirement on the number of trees accounted for the greatest proportion; furthermore, most interviewees suggested that the government should continue to provide incentives even after 20 years. 5. Since the government shares the same goals as TSC, there should be sufficient cooperation and communication that support the technical instruction and reduction of afforestation cost, which will also help to improve effectiveness of the policy.
Abstract: This research is aimed to describe the application of robust regression and its advantages over the least square regression method in analyzing financial data. To do this, relationship between earning per share, book value of equity per share and share price as price model and earning per share, annual change of earning per share and return of stock as return model is discussed using both robust and least square regressions, and finally the outcomes are compared. Comparing the results from the robust regression and the least square regression shows that the former can provide the possibility of a better and more realistic analysis owing to eliminating or reducing the contribution of outliers and influential data. Therefore, robust regression is recommended for getting more precise results in financial data analysis.
Abstract: Recently, lots of researchers are attracted to retrieving
multimedia database by using some impression words and their values.
Ikezoe-s research is one of the representatives and uses eight pairs of
opposite impression words. We had modified its retrieval interface and
proposed '2D-RIB' in the previous work. The aim of the present paper
is to improve his/her satisfaction level to the retrieval result in the
2D-RIB. Our method is to extend the 2D-RIB. One of our extensions is
to define and introduce the following two measures: 'melody
goodness' and 'general acceptance'. Another extension is three types
of customization menus. The result of evaluation using a pilot system
is as follows. Both of these two measures 'melody goodness'
and -general acceptance- can contribute to the improvement.
Moreover, it is effective if we introduce the customization menu
which enables a retrieval person to reduce the strictness level of
retrieval condition in an impression pair based on his/her need.
Abstract: Experiments were carried out at the Latvia State
Institute of Fruit-Growing in 2011. Fresh-cut minimally processed
apple and pear mixed salad were packed by passive modified
atmosphere (MAP) in PP containers, which were hermetically sealed
by breathable conventional BOPP PropafreshTM P2GAF, and Amcor
Agrifresh films. Biodegradable NatureFlexTM NVS INNOVIA Films
and VC999 BioPack PLA films coated with a barrier of pure silicon
oxide (SiOx) were used to compare the fresh-cut produce quality
with this packed in conventional packaging films. Samples were cold
stored at temperature +4.0±0.5 °C up to 10 days. The quality of salad
was evaluated by physicochemical properties – weight losses,
moisture, firmness, the effect of packaging modes on the colour,
dynamics in headspace atmosphere concentration (CO2 and O2),
titratable acidity values, as well as by microbiological contamination
(yeasts, moulds and total bacteria count) of salads, analyzing before
packaging and after 2, 4, 6, 8, and 10 storage days.
Abstract: Author presents the results of a study conducted to identify criteria of efficient information system (IS) with serviceoriented architecture (SOA) realization and proposes a ranking method to evaluate SOA information systems using a set of architecture quality criteria before the systems are implemented. The method is used to compare 7 SOA projects and ranking result for SOA efficiency of the projects is provided. The choice of SOA realization project depends on following criteria categories: IS internal work and organization, SOA policies, guidelines and change management, processes and business services readiness, risk management and mitigation. The last criteria category was analyzed on the basis of projects statistics.
Abstract: This work presents a new approach of securing a
wireless network. The configuration is focused on securing &
Protecting wireless network traffic for a small network such as a
home or dorm room. The security Mechanism provided both
authentication, allowing only known authorized users access to the
wireless network, and encryption, preventing anyone from reading
the wireless traffic. The mentioned solution utilizes the open source
free S/WAN software which implements the Internet Protocol
Security –IPSEC. In addition to wireless components, wireless NIC
in PC and wireless access point needs a machine running Linux to act
as security gateway. While the current configuration assumes that the
wireless PC clients are running Linux, Windows XP/VISTA/7 based
machines equipped with VPN software which will allow to interface
with this configuration.
Abstract: The present paper deals with the most adopted technical
solutions for the enhancement of the lift force of a wing. In fact,
during several flight conditions (such as take off and landing), the
lift force needs to be dramatically enhanced. Both trailing edge
devices (such as flaps) and leading edge ones (such as slats) are
described. Finally, the most advanced aerodynamic solutions to avoid
the separation of the boundary layer from aircraft wings at high angles
of attack are reviewed.
Abstract: Because of high ductility, aluminum alloys, have been widely used as an important base of metal forming industries. But the main week point of these alloys is their low strength so in forming them with conventional methods like deep drawing, hydro forming, etc have been always faced with problems like fracture during of forming process. Because of this, recently using of explosive forming method for forming of these plates has been recommended. In this paper free explosive forming of A2024 aluminum alloy is numerically simulated and during it, explosion wave propagation process is studied. Consequences of this simulation can be effective in prediction of quality of production. These consequences are compared with an experimental test and show the superiority of this method to similar methods like hydro forming and deep drawing.