Abstract: We see in the present day scenario that the Global
positioning system (GPS) has been an effective tool to track the
vehicle. However the adverse part of it is that it can only track a
vehicle-s position. Our present work provides a better platform to
track and disable a vehicle using wireless technology. In our system
we embed a microcomputer which monitors the series of automotive
systems like engine, fuel and braking system. The external USB
modem is connected with the microcomputer to provide 24 x 7
internet accesses. The microcomputer is synchronized with the
owner-s multimedia mobile by means of a software tool “REMOTE
DESKTOP". A unique username and password is provided to the
software tool, so that the owner can only access the microcomputer
through the internet on owner-s mobile. The key fact is that our
design is placed such that it is known only to the owner.
Abstract: Dedicated Short Range Communication (DSRC) is a
key enabling technology for the next generation of
communication-based safety applications. One of the important
problems for DSRC deployment is maintaining high performance
under heavy channel load. Many studies focus on congestion control
mechanisms for simulating hundreds of physical radios deployed on
vehicles. The U.S. department of transportation-s (DOT) Intelligent
Transportation Systems (ITS) division has a plan to chosen prototype
on-board devices capable of transmitting basic “Here I am" safety
messages to other vehicles. The devices will be used in an IntelliDrive
safety pilot deployment of up to 3,000 vehicles. It is hard to log the
information of 3,000 vehicles. In this paper we present the designs and
issues related to the DSRC Radio Testbed under heavy channel load.
The details not only include the architecture of DSRC Radio Testbed,
but also describe how the Radio Interfere System is used to help for
emulating the congestion radio environment.
Abstract: This paper aims at identifying and analyzing the
knowledge transmission channels in textile and clothing clusters
located in Brazil and in Europe. Primary data was obtained through
interviews with key individuals. The collection of primary data was
carried out based on a questionnaire with ten categories of indicators
of knowledge transmission. Secondary data was also collected
through a literature review and through international organizations
sites. Similarities related to the use of the main transmission channels
of knowledge are observed in all cases. The main similarities are:
influence of suppliers of machinery, equipment and raw materials;
imitation of products and best practices; training promoted by
technical institutions and businesses; and cluster companies being
open to acquire new knowledge. The main differences lie in the
relationship between companies, where in Europe the intensity of this
relationship is bigger when compared to Brazil. The differences also
occur in importance and frequency of the relationship with the
government, with the cultural environment, and with the activities of
research and development. It is also found factors that reduce the
importance of geographical proximity in transmission of knowledge,
and in generating trust and the establishment of collaborative
behavior.
Abstract: This paper covered a series of key points in terms of 2D to 3D stereoscopic conversion. A successfully applied stereoscopic conversion approach in current visual effects industry was presented. The purpose of this paper is to cover a detailed workflow and concept, which has been successfully used in 3D stereoscopic conversion for feature films in visual effects industry, and therefore to clarify the process in stereoscopic conversion production and provide a clear idea for those entry-level artists to improve an overall understanding of 3D stereoscopic in digital compositing field as well as to the higher education factor of visual effects and hopefully inspire further collaboration and participants particularly between academia and industry.
Abstract: The ElectroEncephaloGram (EEG) is useful for
clinical diagnosis and biomedical research. EEG signals often
contain strong ElectroOculoGram (EOG) artifacts produced
by eye movements and eye blinks especially in EEG recorded
from frontal channels. These artifacts obscure the underlying
brain activity, making its visual or automated inspection
difficult. The goal of ocular artifact removal is to remove
ocular artifacts from the recorded EEG, leaving the underlying
background signals due to brain activity. In recent times,
Independent Component Analysis (ICA) algorithms have
demonstrated superior potential in obtaining the least
dependent source components. In this paper, the independent
components are obtained by using the JADE algorithm (best
separating algorithm) and are classified into either artifact
component or neural component. Neural Network is used for
the classification of the obtained independent components.
Neural Network requires input features that exactly represent
the true character of the input signals so that the neural
network could classify the signals based on those key
characters that differentiate between various signals. In this
work, Auto Regressive (AR) coefficients are used as the input
features for classification. Two neural network approaches
are used to learn classification rules from EEG data. First, a
Polynomial Neural Network (PNN) trained by GMDH (Group
Method of Data Handling) algorithm is used and secondly,
feed-forward neural network classifier trained by a standard
back-propagation algorithm is used for classification and the
results show that JADE-FNN performs better than JADEPNN.
Abstract: Organizational culture fosters innovation, and innovation is the main engine to be sustained within the uncertainty market. Like other countries, the construction industry significantly contributes to the economy, society and technology of Malaysia, yet, innovation is still considered slow compared to other industries such as manufacturing. Given the important role of an architect as the key player and the contributor of new ideas in the construction industry, there is a call to identify the issue and improve the current situation by focusing on the architectural firms. In addition, the existing studies tend to focus only on a few dimensions of organizational culture and very few studies consider whether innovation is being generated or adopted. Hence, the present research tends to fill in the gap by identifying the organizational cultures that foster or hinder innovation generation and/or innovation adoption, and propose a model of organizational culture and innovation generation and/or adoption.
Abstract: RF performance of SOI CMOS device has attracted
significant amount of interest recently. In order to improve RF
parameters, Strained Si/Relaxed Si0.8Ge0.2 investigated as a
replacement for Si technology .Enhancement of carrier mobility
associated with strain engineering makes Strained Si a promising
candidate for improving RF performance of CMOS technology.
From the simulation, the cut-off frequency is estimated to be 224
GHZ, whereas in SOI at similar bias is about 188 GHZ. Therefore,
Strained Si exhibits 19% improvement in cut-off frequency over
similar Si counterpart. In this paper, Ion/Ioff ratio is studied as one of
the key parameters in logic and digital application. Strained Si/SiGe
demonstrates better Ion/Ioff characteristic than SOI, in similar channel
length of 100 nm.Another important key analog figures of merit such
as Early Voltage (VEA) ,transconductance vs drain current (gm /Ids)
are studied. They introduce the efficiency of the devices to convert
dc power into ac frequency.
Abstract: Ethanol is generally used as a therapeutic reagent against Hepatocellular carcinoma (HCC or hepatoma) worldwide, as it can induce Hepatocellular carcinoma cell apoptosis at low concentration through a multifactorial process regulated by several unknown proteins. This paper provides a simple and available proteomic strategy for exploring differentially expressed proteins in the apoptotic pathway. The appropriate concentrations of ethanol required to induce HepG2 cell apoptosis were first assessed by MTT assay, Gisma and fluorescence staining. Next, the central proteins involved in the apoptosis pathway processs were determined using 2D-PAGE, SDS-PAGE, and bio-software analysis. Finally the downregulation of two proteins, AFP and survivin, were determined by immunocytochemistry and reverse transcriptase PCR (RT-PCR) technology. The simple, useful method demonstrated here provides a new approach to proteomic analysis in key bio-regulating process including proliferation, differentiation, apoptosis, immunity and metastasis.
Abstract: In this paper, a novel approach for the multidisciplinary design optimization (MDO) of complex mechatronic systems. This approach, which is a part of a global project aiming to include the MDO aspect inside an innovative design process. As a first step, the paper considers the MDO as a redesign approach which is limited to the parametric optimization. After defining and introducing the different keywords, the proposed method which is based on the V-Model which is commonly used in mechatronics.
Abstract: For the first incumbent operator it is very important
to understand how to react when the second operator comes to the
market. In this paper which is prepared for preliminary study of
GSM market in Iran, we have studied five MENA markets
according to the similarity point of view. This paper aims at
analyzing the impact of second entrants in selected markets on
certain marketing key performance indicators (KPI) such as:
Market shares (by operator), prepaid share, minutes of use (MoU),
Price and average revenue per user (ARPU) (for total market
each).
Abstract: In this competitive age, one of the key tools of most successful organizations is knowledge management. Today some organizations measure their current knowledge and use it as an indicator for rating the organization on their reports. Noting that the universities and colleges of medical science have a great role in public health of societies, their access to newest scientific research and the establishment of organizational knowledge management systems is very important. In order to explore the Application of Knowledge Management Factors, a national study was undertaken. The main purpose of this study was to find the rate of the application of knowledge management factors and some ways to establish more application of knowledge management system in Esfahan University-s Medical College (EUMC). Esfahan is the second largest city after Tehran, the capital city of Iran, and the EUMC is the biggest medical college in Esfahan. To rate the application of knowledge management, this study uses a quantitative research methodology based on Probst, Raub and Romhardt model of knowledge management. A group of 267 faculty members and staff of the EUMC were asked via questionnaire. Finding showed that the rate of the application of knowledge management factors in EUMC have been lower than average. As a result, an interview with ten faculty members conducted to find the guidelines to establish more applications of knowledge management system in EUMC.
Abstract: Since 1984 many schemes have been proposed for
digital signature protocol, among them those that based on discrete
log and factorizations. However a new identification scheme based
on iterated function (IFS) systems are proposed and proved to be
more efficient. In this study the proposed identification scheme is
transformed into a digital signature scheme by using a one way hash
function. It is a generalization of the GQ signature schemes. The
attractor of the IFS is used to obtain public key from a private one,
and in the encryption and decryption of a hash function. Our aim is
to provide techniques and tools which may be useful towards
developing cryptographic protocols. Comparisons between the
proposed scheme and fractal digital signature scheme based on RSA
setting, as well as, with the conventional Guillou-Quisquater
signature, and RSA signature schemes is performed to prove that, the
proposed scheme is efficient and with high performance.
Abstract: Most Decision Support Systems (DSS) for waste
management (WM) constructed are not widely marketed and lack
practical applications. This is due to the number of variables and
complexity of the mathematical models which include the
assumptions and constraints required in decision making. The
approach made by many researchers in DSS modelling is to isolate a
few key factors that have a significant influence to the DSS. This
segmented approach does not provide a thorough understanding of
the complex relationships of the many elements involved. The
various elements in constructing the DSS must be integrated and
optimized in order to produce a viable model that is marketable and
has practical application. The DSS model used in assisting decision
makers should be integrated with GIS, able to give robust prediction
despite the inherent uncertainties of waste generation and the plethora
of waste characteristics, and gives optimal allocation of waste stream
for recycling, incineration, landfill and composting.
Abstract: In this paper, we have proposed two novel plasmonic demultiplexing structures based on metal-insulator-metal surfaces which, beside their compact size, have a very good transmission spectrum. The impact of the key internal parameters on the transmission spectrum is numerically analyzed by using the twodimensional (2D) finite difference time domain (FDTD) method. The proposed structures could be used to develop ultra-compact photonic wavelength demultiplexing devices for large-scale photonic integration.
Abstract: Knowledge sharing in general and the contextual
access to knowledge in particular, still represent a key challenge in
the knowledge management framework. Researchers on semantic
web and human machine interface study techniques to enhance this
access. For instance, in semantic web, the information retrieval is
based on domain ontology. In human machine interface, keeping
track of user's activity provides some elements of the context that can
guide the access to information. We suggest an approach based on
these two key guidelines, whilst avoiding some of their weaknesses.
The approach permits a representation of both the context and the
design rationale of a project for an efficient access to knowledge. In
fact, the method consists of an information retrieval environment
that, in the one hand, can infer knowledge, modeled as a semantic
network, and on the other hand, is based on the context and the
objectives of a specific activity (the design). The environment we
defined can also be used to gather similar project elements in order to
build classifications of tasks, problems, arguments, etc. produced in a
company. These classifications can show the evolution of design
strategies in the company.
Abstract: This study reports the implementation of Good
Manufacturing Practice (GMP) in a polycarbonate film processing
plant. The implementation of GMP took place with the creation of a
multidisciplinary team. It was carried out in four steps: conduct gap
assessment, create gap closure plan, close gaps, and follow up the
GMP implementation. The basis for the gap assessment is the
guideline for GMP for plastic materials and articles intended for Food
Contact Material (FCM), which was edited by Plastic Europe. The
effective results of the GMP implementation in this study showed
100% completion of gap assessment. The key success factors for
implementing GMP in production process are the commitment,
intention and support of top management.
Abstract: A key to success of high quality software development
is to define valid and feasible requirements specification. We have
proposed a method of model-driven requirements analysis using
Unified Modeling Language (UML). The main feature of our method
is to automatically generate a Web user interface mock-up from UML
requirements analysis model so that we can confirm validity of
input/output data for each page and page transition on the system by
directly operating the mock-up. This paper proposes a support method
to check the validity of a data life cycle by using a model checking tool
“UPPAAL" focusing on CRUD (Create, Read, Update and Delete).
Exhaustive checking improves the quality of requirements analysis
model which are validated by the customers through automatically
generated mock-up. The effectiveness of our method is discussed by a
case study of requirements modeling of two small projects which are a
library management system and a supportive sales system for text
books in a university.
Abstract: Nevertheless the widespread application of finite
mixture models in segmentation, finite mixture model selection is
still an important issue. In fact, the selection of an adequate number
of segments is a key issue in deriving latent segments structures and
it is desirable that the selection criteria used for this end are effective.
In order to select among several information criteria, which may
support the selection of the correct number of segments we conduct a
simulation study. In particular, this study is intended to determine
which information criteria are more appropriate for mixture model
selection when considering data sets with only categorical
segmentation base variables. The generation of mixtures of
multinomial data supports the proposed analysis. As a result, we
establish a relationship between the level of measurement of
segmentation variables and some (eleven) information criteria-s
performance. The criterion AIC3 shows better performance (it
indicates the correct number of the simulated segments- structure
more often) when referring to mixtures of multinomial segmentation
base variables.
Abstract: Urban disaster risks and vulnerabilities are great problems for Turkey. The annual loss of life and property through disaster in the world-s major metropolitan areas is increasing. Urban concentrations of the poor and less-informed in environmentally fragile locations suffer the impact of disaster disproportionately. Gecekondu (squatter) developments will compound the inherent risks associated with high-density environments, in appropriate technologies, and inadequate infrastructure. On the other hand, there are many geological disadvantages such as sitting on top of active tectonic plate boundaries, and why having avalanche, flood, and landslide and drought prone areas in Turkey. However, this natural formation is inevitable; the only way to survive in such a harsh geography is to be aware of importance of these natural events and to take political and physical measures. The main aim of this research is to bring up the magnitude of natural hazard risks in Izmir built-up zone, not being taken into consideration adequately. Because the dimensions of the peril are not taken seriously enough, the natural hazard risks, which are commonly well known, are not considered important or they are being forgotten after some time passes. Within this research, the magnitude of natural hazard risks for Izmir is being presented in the scope of concrete and local researches over Izmir risky areas.
Abstract: Secure electronic payment system is presented in this
paper. This electronic payment system is to be secure for clients such
as customers and shop owners. The security architecture of the
system is designed by RC5 encryption / decryption algorithm. This
eliminates the fraud that occurs today with stolen credit card
numbers. The symmetric key cryptosystem RC5 can protect
conventional transaction data such as account numbers, amount and
other information. This process can be done electronically using RC5
encryption / decryption program written by Microsoft Visual Basic
6.0. There is no danger of any data sent within the system being
intercepted, and replaced. The alternative is to use the existing
network, and to encrypt all data transmissions. The system with
encryption is acceptably secure, but that the level of encryption has
to be stepped up, as computing power increases. Results In order to
be secure the system the communication between modules is
encrypted using symmetric key cryptosystem RC5. The system will
use simple user name, password, user ID, user type and cipher
authentication mechanism for identification, when the user first
enters the system. It is the most common method of authentication in
most computer system.