Abstract: A major requirement for Grid application developers is ensuring performance and scalability of their applications. Predicting the performance of an application demands understanding its specific features. This paper discusses performance modeling and prediction of multi-agent based simulation (MABS) applications on the Grid. An experiment conducted using a synthetic MABS workload explains the key features to be included in the performance model. The results obtained from the experiment show that the prediction model developed for the synthetic workload can be used as a guideline to understand to estimate the performance characteristics of real world simulation applications.
Abstract: The purposes of this paper are to (1) promote excellence in computer science by suggesting a cohesive innovative approach to fill well documented deficiencies in current computer science education, (2) justify (using the authors' and others anecdotal evidence from both the classroom and the real world) why this approach holds great potential to successfully eliminate the deficiencies, (3) invite other professionals to join the authors in proof of concept research. The authors' experiences, though anecdotal, strongly suggest that a new approach involving visual modeling technologies should allow computer science programs to retain a greater percentage of prospective and declared majors as students become more engaged learners, more successful problem-solvers, and better prepared as programmers. In addition, the graduates of such computer science programs will make greater contributions to the profession as skilled problem-solvers. Instead of wearily rememorizing code as they move to the next course, students will have the problem-solving skills to think and work in more sophisticated and creative ways.
Abstract: Day by day technology increases and problems
associated with this technology also increase. Several researches
were carried out to investigate the deployment of such material safely
in geotechnical engineering in particular and civil engineering in
general. However, different types of waste material have such as
cement duct, fly ash and slag been proven to be suitable in several
applications. In this research cement dust mixed with different
percentages of sand will be used in some civil engineering
application as will be explained later in this paper throughout filed
and laboratory test. The used mixer (waste material with sand) prove
high performance, durability to environmental condition, low cost
and high benefits. At higher cement dust ratio, small cement ratio is
valuable for compressive strength and permeability. Also at small
cement dust ratio higher cement ratio is valuable for compressive
strength.
Abstract: HSDPA is a new feature which is introduced in
Release-5 specifications of the 3GPP WCDMA/UTRA standard to
realize higher speed data rate together with lower round-trip times.
Moreover, the HSDPA concept offers outstanding improvement of
packet throughput and also significantly reduces the packet call
transfer delay as compared to Release -99 DSCH. Till now the
HSDPA system uses turbo coding which is the best coding technique
to achieve the Shannon limit. However, the main drawbacks of turbo
coding are high decoding complexity and high latency which makes
it unsuitable for some applications like satellite communications,
since the transmission distance itself introduces latency due to
limited speed of light. Hence in this paper it is proposed to use LDPC
coding in place of Turbo coding for HSDPA system which decreases
the latency and decoding complexity. But LDPC coding increases the
Encoding complexity. Though the complexity of transmitter
increases at NodeB, the End user is at an advantage in terms of
receiver complexity and Bit- error rate. In this paper LDPC Encoder
is implemented using “sparse parity check matrix" H to generate a
codeword at Encoder and “Belief Propagation algorithm "for LDPC
decoding .Simulation results shows that in LDPC coding the BER
suddenly drops as the number of iterations increase with a small
increase in Eb/No. Which is not possible in Turbo coding. Also same
BER was achieved using less number of iterations and hence the
latency and receiver complexity has decreased for LDPC coding.
HSDPA increases the downlink data rate within a cell to a theoretical
maximum of 14Mbps, with 2Mbps on the uplink. The changes that
HSDPA enables includes better quality, more reliable and more
robust data services. In other words, while realistic data rates are
only a few Mbps, the actual quality and number of users achieved
will improve significantly.
Abstract: Generally, administrative systems in an academic
environment are disjoint and support independent queries. The
objective in this work is to semantically connect these independent
systems to provide support to queries run on the integrated platform.
The proposed framework, by enriching educational material in the
legacy systems, provides a value-added semantics layer where
activities such as annotation, query and reasoning can be carried out
to support management requirements. We discuss the development of
this ontology framework with a case study of UAE University
program administration to show how semantic web technologies can
be used by administration to develop student profiles for better
academic program management.
Abstract: This paper proposes a “soft systems" approach to
domain-driven design of computer-based information systems. We
propose a systemic framework combining techniques from Soft
Systems Methodology (SSM), the Unified Modelling Language
(UML), and an implementation pattern known as “Naked Objects".
We have used this framework in action research projects that have
involved the investigation and modelling of business processes using
object-oriented domain models and the implementation of software
systems based on those domain models. Within the proposed
framework, Soft Systems Methodology (SSM) is used as a guiding
methodology to explore the problem situation and to generate a
ubiquitous language (soft language) which can be used as the basis
for developing an object-oriented domain model. The domain model
is further developed using techniques based on the UML and is
implemented in software following the “Naked Objects"
implementation pattern. We argue that there are advantages from
combining and using techniques from different methodologies in this
way.
The proposed systemic framework is overviewed and justified as
multimethodologyusing Mingers multimethodology ideas.
This multimethodology approach is being evaluated through a
series of action research projects based on real-world case studies. A
Peer-Tutoring case study is presented here as a sample of the
framework evaluation process
Abstract: With the development of the Internet, E-commerce is
growing at an exponential rate, and lots of online stores are built up to
sell their goods online. A major factor influencing the successful
adoption of E-commerce is consumer-s trust. For new or unknown
Internet business, consumers- lack of trust has been cited as a major
barrier to its proliferation. As web sites provide key interface for
consumer use of E-Commerce, we investigate the design of web site to
build trust in E-Commerce from a design science approach. A
conceptual model is proposed in this paper to describe the ontology of
online transaction and human-computer interaction. Based on this
conceptual model, we provide a personalized webpage design
approach using Bayesian networks learning method. Experimental
evaluation are designed to show the effectiveness of web
personalization in improving consumer-s trust in new or unknown
online store.
Abstract: The purpose of this study was to develop a “teachers’
self-efficacy scale for high school physical education teachers
(TSES-HSPET)” in Taiwan. This scale is based on the self-efficacy
theory of Bandura [1], [2]. This study used exploratory and
confirmatory factor analyses to test the reliability and validity. The
participants were high school physical education teachers in Taiwan.
Both stratified random sampling and cluster sampling were used to
sample participants for the study. 350 teachers were sampled in the
first stage and 234 valid scales (male 133, female 101) returned.
During the second stage, 350 teachers were sampled and 257 valid
scales (male 143, female 110, 4 did not indicate gender) returned. The
exploratory factor analysis was used in the first stage, and it got
60.77% of total variance for construct validity. The Cronbach’s alpha
coefficient of internal consistency was 0.91 for sumscale, and
subscales were 0.84 and 0.90. In the second stage, confirmatory factor
analysis was used to test construct validity. The result showed that the
fit index could be accepted (χ2 (75) =167.94, p
Abstract: The cinema in Turkey during the 1940s was shaped
under the Second World War conditions. The amateur film makers
from different socioeconomic roots experienced movie production in
those years. Having similar socioeconomic characteristics and
autobiographies, each of them has a different understanding of
cinema. Nevertheless, they joined in making movies which address
native culture and audience. They narrated indigenous stories with
native music, amateur players and simple settings. Although the
martial law, censorship and economical deficiencies, they started to
produce films in the Second World War. The cinematographers of the
1940s usually called as thetransition period cinematographers in
Turkey, producing in the passage between the period of thetheatre
playersand the period of thenational cinema. But, 1940- 1950 period
of Turkish cinema should be defined not as a transition but a period
of forming the professional conscioussness in cinema.
Abstract: This investigation examines the effect of the sintering
temperature curve in manufactured nickel powder capillary structure
(wick) for a loop heat pipe (LHP). The sintering temperature curve is
composed of a region of increasing temperature; a region of constant
temperature and a region of declining temperature. The most important
region is that in which the temperature increases, as an index in the
stage in which the temperature increases. The wick of nickel powder is
manufactured in the stage of fixed sintering temperature and the time
between the stage of constant temperature and the stage of falling
temperature. When the slope of the curve in the region of increasing
temperature is unity (equivalent to 10 °C/min), the structure of the
wick is complete and the heat transfer performance is optimal. The
result of experiment test demonstrates that the heat transfer
performance is optimal at 320W; the minimal total thermal resistance
is approximately 0.18°C/W, and the heat flux is 17W/cm2; the internal
parameters of the wick are an effective pore radius of 3.1 μm, a
permeability of 3.25×10-13m2 and a porosity of 71%.
Abstract: Digital watermarking in medical images can ensure
the authenticity and integrity of the image. This design paper reviews
some existing watermarking schemes and proposes a reversible
tamper detection and recovery watermarking scheme. Watermark
data from ROI (Region Of Interest) are stored in RONI (Region Of
Non Interest). The embedded watermark allows tampering detection
and tampered image recovery. The watermark is also reversible and
data compression technique was used to allow higher embedding
capacity.
Abstract: Distributed wireless sensor network consist on several
scattered nodes in a knowledge area. Those sensors have as its only
power supplies a pair of batteries that must let them live up to five
years without substitution. That-s why it is necessary to develop
some power aware algorithms that could save battery lifetime as
much as possible. In this is document, a review of power aware
design for sensor nodes is presented. As example of implementations,
some resources and task management, communication, topology
control and routing protocols are named.
Abstract: A 2-Degrees of freedom powered prosthetic wrist
actuator has been proposed that can provide the Abduction/Adduction
& Flexion/Extension movements of the human wrist. The basic
structure of the actuator is a Ball and Socket joint and the force is
transmitted from the DC geared servo motors to the joint through the
Bowden cables. The proposed design is capable of providing the
required DOF in both axes i.e. 85° & 90° in flexion extension axis.
The size and weight of the actuator lies within the ranges of an
average human being-s wrist.
Abstract: This paper mainly about the study on one of the
widely used error correcting codes that is Low parity check Codes
(LDPC). In this paper, the Regular LDPC code has been discussed
The LDPC codes explained in this paper is about the Regular Binary
LDPC codes or the Gallager.
Abstract: This paper unifies power optimization approaches in
various energy converters, such as: thermal, solar, chemical, and
electrochemical engines, in particular fuel cells. Thermodynamics
leads to converter-s efficiency and limiting power. Efficiency
equations serve to solve problems of upgrading and downgrading of
resources. While optimization of steady systems applies the
differential calculus and Lagrange multipliers, dynamic optimization
involves variational calculus and dynamic programming. In reacting
systems chemical affinity constitutes a prevailing component of an
overall efficiency, thus the power is analyzed in terms of an active
part of chemical affinity. The main novelty of the present paper in the
energy yield context consists in showing that the generalized heat
flux Q (involving the traditional heat flux q plus the product of
temperature and the sum products of partial entropies and fluxes of
species) plays in complex cases (solar, chemical and electrochemical)
the same role as the traditional heat q in pure heat engines.
The presented methodology is also applied to power limits in fuel
cells as to systems which are electrochemical flow engines propelled
by chemical reactions. The performance of fuel cells is determined by
magnitudes and directions of participating streams and mechanism of
electric current generation. Voltage lowering below the reversible
voltage is a proper measure of cells imperfection. The voltage losses,
called polarization, include the contributions of three main sources:
activation, ohmic and concentration. Examples show power maxima
in fuel cells and prove the relevance of the extension of the thermal
machine theory to chemical and electrochemical systems. The main
novelty of the present paper in the FC context consists in introducing
an effective or reduced Gibbs free energy change between products p
and reactants s which take into account the decrease of voltage and
power caused by the incomplete conversion of the overall reaction.
Abstract: Reduction of Single Input Single Output (SISO) discrete systems into lower order model, using a conventional and an evolutionary technique is presented in this paper. In the conventional technique, the mixed advantages of Modified Cauer Form (MCF) and differentiation are used. In this method the original discrete system is, first, converted into equivalent continuous system by applying bilinear transformation. The denominator of the equivalent continuous system and its reciprocal are differentiated successively, the reduced denominator of the desired order is obtained by combining the differentiated polynomials. The numerator is obtained by matching the quotients of MCF. The reduced continuous system is converted back into discrete system using inverse bilinear transformation. In the evolutionary technique method, Particle Swarm Optimization (PSO) is employed to reduce the higher order model. PSO method is based on the minimization of the Integral Squared Error (ISE) between the transient responses of original higher order model and the reduced order model pertaining to a unit step input. Both the methods are illustrated through numerical example.
Abstract: With Power system movement toward restructuring along with factors such as life environment pollution, problems of transmission expansion and with advancement in construction technology of small generation units, it is expected that small units like wind turbines, fuel cells, photovoltaic, ... that most of the time connect to the distribution networks play a very essential role in electric power industry. With increase in developing usage of small generation units, management of distribution networks should be reviewed. The target of this paper is to present a new method for optimal management of active and reactive power in distribution networks with regard to costs pertaining to various types of dispersed generations, capacitors and cost of electric energy achieved from network. In other words, in this method it-s endeavored to select optimal sources of active and reactive power generation and controlling equipments such as dispersed generations, capacitors, under load tapchanger transformers and substations in a way that firstly costs in relation to them are minimized and secondly technical and physical constraints are regarded. Because the optimal management of distribution networks is an optimization problem with continuous and discrete variables, the new evolutionary method based on Ant Colony Algorithm has been applied. The simulation results of the method tested on two cases containing 23 and 34 buses exist and will be shown at later sections.
Abstract: With today's fast lifestyles and busy schedule, nuclear
families are becoming popular. Thus, the elderly members of these
families are often neglected. This has lead to the popularity of the
concept of Community living for the aged. The elders reside at a
centre, which is controlled by the MANAGER. The manager takes
responsibility of the functioning of the centre which includes taking
care of 'residents' at the centre along with managing the daily chores
of the centre, which he accomplishes with the help of a number of
staff members and volunteers Often the Manager is not an employee
but a volunteer. In such cases especially, time is an important
constraint. A system, which provides an easy and efficient manner of
managing the working of an old age home in detail, will prove to be
of great benefit. We have developed a P.C. based organizer used to
monitor the various activities of an old age home. It is an effective
and easy-to-use system which will enable the manager to keep an
account of all the residents, their accounts, staff members, volunteers,
the centre-s logistic requirements etc. It is thus, a comprehensive
'Organizer' for Old Age Homes.
Abstract: In image processing and visualization, comparing two
bitmapped images needs to be compared from their pixels by matching
pixel-by-pixel. Consequently, it takes a lot of computational time
while the comparison of two vector-based images is significantly
faster. Sometimes these raster graphics images can be approximately
converted into the vector-based images by various techniques. After
conversion, the problem of comparing two raster graphics images
can be reduced to the problem of comparing vector graphics images.
Hence, the problem of comparing pixel-by-pixel can be reduced to
the problem of polynomial comparisons. In computer aided geometric
design (CAGD), the vector graphics images are the composition of
curves and surfaces. Curves are defined by a sequence of control
points and their polynomials. In this paper, the control points will be
considerably used to compare curves. The same curves after relocated
or rotated are treated to be equivalent while two curves after different
scaled are considered to be similar curves. This paper proposed an
algorithm for comparing the polynomial curves by using the control
points for equivalence and similarity. In addition, the geometric
object-oriented database used to keep the curve information has also
been defined in XML format for further used in curve comparisons.
Abstract: Whereas cellular wireless communication systems are
subject to short-and long-term fading. The effect of wireless channel
has largely been ignored in most of the teletraffic assessment
researches. In this paper, a mathematical teletraffic model is proposed
to estimate blocking and forced termination probabilities of cellular
wireless networks as a result of teletraffic behavior as well as the
outage of the propagation channel. To evaluate the proposed
teletraffic model, gamma inter-arrival and general service time
distributions have been considered based on wireless channel fading
effect. The performance is evaluated and compared with the classical
model. The proposed model is dedicated and investigated in different
operational conditions. These conditions will consider not only the
arrival rate process, but also, the different faded channels models.