Abstract: Power consumption of nodes in ad hoc networks is a
critical issue as they predominantly operate on batteries. In order to
improve the lifetime of an ad hoc network, all the nodes must be
utilized evenly and the power required for connections must be
minimized. In this project a link layer algorithm known as Power
Aware medium Access Control (PAMAC) protocol is proposed
which enables the network layer to select a route with minimum total
power requirement among the possible routes between a source and a
destination provided all nodes in the routes have battery capacity
above a threshold. When the battery capacity goes below a
predefined threshold, routes going through these nodes will be
avoided and these nodes will act only as source and destination.
Further, the first few nodes whose battery power drained to the set
threshold value are pushed to the exterior part of the network and the
nodes in the exterior are brought to the interior. Since less total
power is required to forward packets for each connection. The
network layer protocol AOMDV is basically an extension to the
AODV routing protocol. AOMDV is designed to form multiple
routes to the destination and it also avoid the loop formation so that it
reduces the unnecessary congestion to the channel. In this project, the
performance of AOMDV is evaluated using PAMAC as a MAC layer
protocol and the average power consumption, throughput and
average end to end delay of the network are calculated and the results
are compared with that of the other network layer protocol AODV.
Abstract: Using Dynamic Bayesian Networks (DBN) to model genetic regulatory networks from gene expression data is one of the major paradigms for inferring the interactions among genes. Averaging a collection of models for predicting network is desired, rather than relying on a single high scoring model. In this paper, two kinds of model searching approaches are compared, which are Greedy hill-climbing Search with Restarts (GSR) and Markov Chain Monte Carlo (MCMC) methods. The GSR is preferred in many papers, but there is no such comparison study about which one is better for DBN models. Different types of experiments have been carried out to try to give a benchmark test to these approaches. Our experimental results demonstrated that on average the MCMC methods outperform the GSR in accuracy of predicted network, and having the comparable performance in time efficiency. By proposing the different variations of MCMC and employing simulated annealing strategy, the MCMC methods become more efficient and stable. Apart from comparisons between these approaches, another objective of this study is to investigate the feasibility of using DBN modeling approaches for inferring gene networks from few snapshots of high dimensional gene profiles. Through synthetic data experiments as well as systematic data experiments, the experimental results revealed how the performances of these approaches can be influenced as the target gene network varies in the network size, data size, as well as system complexity.
Abstract: This paper suggests an algorithm for the evaluation
and selection of suppliers. At the beginning, all the needed materials and services used by the organization were identified and categorized
with regard to their nature by ABC method. Afterwards, in order to reduce risk factors and maximize the organization's profit, purchase strategies were determined. Then, appropriate criteria were identified for primary evaluation of suppliers applying to the organization. The output of this stage was a list of suppliers qualified by the organization to participate in its tenders. Subsequently, considering a material in particular, appropriate criteria on the ordering of the
mentioned material were determined, taking into account the particular materials' specifications as well as the organization's needs. Finally, for the purpose of validation and verification of the
proposed model, it was applied to Mobarakeh Steel Company (MSC), the qualified suppliers of this Company are ranked by the means of a Hierarchical Fuzzy TOPSIS method. The obtained results
show that the proposed algorithm is quite effective, efficient and easy to apply.
Abstract: All over the world, including the Middle and East
European countries, sustainable tillage and sowing technologies are
applied increasingly broadly with a view to optimising soil resources,
mitigating soil degradation processes, saving energy resources,
preserving biological diversity, etc. As a result, altered conditions of
tillage and sowing technological processes are faced inevitably. The
purpose of this study is to determine the seedbed topsoil hardness
when using a combined sowing coulter in different sustainable tillage
technologies. The research involved a combined coulter consisting
of two dissected blade discs and a shoe coulter. In order to determine
soil hardness at the seedbed area, a multipenetrometer was used. It
was found by experimental studies that in loosened soil, a combined
sowing coulter equally suppresses the furrow bottom, walls and soil
near the furrow; therefore, here, soil hardness was similar at all
researched depths and no significant differences were established. In
loosened and compacted (double-rolled) soil, the impact of a
combined coulter on the hardness of seedbed soil surface was more
considerable at a depth of 2 mm. Soil hardness at the furrow bottom
and walls to a distance of up to 26 mm was 1.1 MPa. At a depth of 10
mm, the greatest hardness was established at the furrow bottom. In
loosened and heavily compacted (rolled for 6 times) soil, at a depth
of 2 and 10 mm a combined coulter most of all compacted the furrow
bottom, which has a hardness of 1.8 MPa. At a depth of 20 mm, soil
hardness within the whole investigated area varied insignificantly and
fluctuated by around 2.0 MPa. The hardness of furrow walls and soil
near the furrow was by approximately 1.0 MPa lower than that at the
furrow bottom
Abstract: The quality and shelf life of foods of containing lipids (fats and oils) significantly reduces due to rancidity.Applications of natural antioxidants are one of the most effective manners to prevent the oxidation of oils and lipids. The antioxidant properties of juice extracted from barberry fruit (Berberris vulgaris.L) using maceration and SWE (10 bars and 120 - 180°C) methods were investigated and compared with conventional method. The amount of phenolic compound and reduction power of all samples were determined and the data were statistically analyzed using multifactor design. The results showed that the total amount of phenolic compound increased with increasing of pressure and temprature from 1861.9 to 2439.1 (mg Gallic acid /100gr Dry matter). The ability of reduction power of SWE obtained antioxidant extract compared with BHA (synthetic antioxidant) and ascorbic acid (natural antioxidant). There were significant differences among reduction power of extracts and there were remarkable difference with BHA and Ascorbic acid (P
Abstract: This article presents the developments of efficient
algorithms for tablet copies comparison. Image recognition has
specialized use in digital systems such as medical imaging,
computer vision, defense, communication etc. Comparison between
two images that look indistinguishable is a formidable task. Two
images taken from different sources might look identical but due to
different digitizing properties they are not. Whereas small variation
in image information such as cropping, rotation, and slight
photometric alteration are unsuitable for based matching
techniques. In this paper we introduce different matching
algorithms designed to facilitate, for art centers, identifying real
painting images from fake ones. Different vision algorithms for
local image features are implemented using MATLAB. In this
framework a Table Comparison Computer Tool “TCCT" is
designed to facilitate our research. The TCCT is a Graphical Unit
Interface (GUI) tool used to identify images by its shapes and
objects. Parameter of vision system is fully accessible to user
through this graphical unit interface. And then for matching, it
applies different description technique that can identify exact
figures of objects.
Abstract: Potato is one of the main components of warm meals in Latvia. Consumption of fried potatoes in Latvia is the highest comparing to Nordic and other Baltic countries. Therefore acrylamide (AA) intake coming from fried potatoes in population might be high as well. The aim of the research was to determine AA content in traditionally cooked potatoes bred and cultivated in Latvia. Five common Latvian potato varieties were selected: Lenora, Brasla, Imanta, Zile and Madara. A two-year research was conducted during two periods: just after harvesting and after six months of storage. The following cooking methods were used: shallow frying (150 ± 5 °C); deep-fat frying (180 ± 5 °C) and roasting (210 ± 5 °C). Time and temperature was recorded during frying. AA was extracted from potatoes by solid phase extraction and AA content was determined by LC-MS/MS. AA content significantly differs (p
Abstract: In this paper we propose a Multiple Description Image Coding(MDIC) scheme to generate two compressed and balanced rates descriptions in the wavelet domain (Daubechies biorthogonal (9, 7) wavelet) using pairwise correlating transform optimal and application method for Generalized Multiple Description Coding (GMDC) to image coding in the wavelet domain. The GMDC produces statistically correlated streams such that lost streams can be estimated from the received data. Our performance test shown that the proposed method gives more improvement and good quality of the reconstructed image when the wavelet coefficients are normalized by Gaussian Scale Mixture (GSM) model then the Gaussian one ,.
Abstract: The increasing demand for sufficient and clean
energy forces industrial and service companies to align their strategies towards efficient consumption. This trend refers also to the
residential building sector. There, large amounts of energy consumption are caused by house and facility heating. Many of the
operated hot water heating systems lack hydraulic balanced working
conditions for heat distribution and –transmission and lead to
inefficient heating. Through hydraulic balancing of heating systems,
significant energy savings for primary and secondary energy can be
achieved. This paper addresses the use of KNX-technology (Smart
Buildings) in residential buildings to ensure a dynamic adaption of
hydraulic system's performance, in order to increase the heating
system's efficiency. In this paper, the procedure of heating system
segmentation into hydraulically independent units (meshes) is
presented. Within these meshes, the heating valve are addressed and
controlled by a central facility server. Feasibility criteria towards
such drivers will be named. The dynamic hydraulic balance is
achieved by positioning these valves according to heating loads, that
are generated from the temperature settings in the corresponding
rooms. The energetic advantages of single room heating control
procedures, based on the application FacilityManager, is presented.
Abstract: With the advance of information technology in the
new era the applications of Internet to access data resources has
steadily increased and huge amount of data have become accessible
in various forms. Obviously, the network providers and agencies,
look after to prevent electronic attacks that may be harmful or may
be related to terrorist applications. Thus, these have facilitated the
authorities to under take a variety of methods to protect the special
regions from harmful data. One of the most important approaches is
to use firewall in the network facilities. The main objectives of
firewalls are to stop the transfer of suspicious packets in several
ways. However because of its blind packet stopping, high process
power requirements and expensive prices some of the providers are
reluctant to use the firewall. In this paper we proposed a method to
find a discriminate function to distinguish between usual packets and
harmful ones by the statistical processing on the network router logs.
By discriminating these data, an administrator may take an approach
action against the user. This method is very fast and can be used
simply in adjacent with the Internet routers.
Abstract: The present paper aims to present the significant role that the concept of governance can play in order to combine naturals resources as useful funding basis for the formation of a stable and effective welfare state model. The combination of those two different fields aims to represent the modern trends of our era as the means to solve the severe financial and economic issues caused mostly due to the malfunction of the welfare state and its public sector. European Union and Asian countries (especially China) are the main areas of interest since EU experiences a fiscal and economic crisis while China rules the area of the natural resources exploiting 97% of rare earths elements worldwide.
Abstract: Leptospirosis occurs worldwide (except the
poles of the earth), urban and rural areas, developed and
developing countries, especially in Thailand. It can be
transmitted to the human by rats through direct and indirect
ways. Human can be infected by either touching the infected rats
or contacting with water, soil containing urine from the infected
rats through skin, eyes and nose. The data of the people who
are infected with this disease indicates that most of the
patients are adults. The transmission of this disease is studied
through mathematical model. The population is separated into human
and rat. The human is divided into two classes, namely juvenile
and adult. The model equation is constructed for each class. The
standard dynamical modeling method is then used for
analyzing the behaviours of solutions. In addition, the
conditions of the parameters for the disease free and endemic
states are obtained. Numerical solutions are shown to support the
theoretical predictions. The results of this study guide the way to
decrease the disease outbreak.
Abstract: The aim of this study is to investigate the effect of
perceived social support and stress on the coping capability and level
of depression of foreign and local students in Malaysia. Using
convenience sampling, 200 students from three universities in
Selangor, Malaysia participated in the study. The results of this study
revealed that there was a significant relationship between perceived
social support and coping capability. It is also found that there is a
negative relationship between coping capability and depression.
Further, stress and depression are positively related whereas stress
and coping capability are negatively related. Lastly, there is no
significant difference for the stress level and coping capability
amongst local and foreign students.
Abstract: The human head representations usually are based on
the morphological – structural components of a real model. Over the
time became more and more necessary to achieve full virtual models
that comply very rigorous with the specifications of the human
anatomy. Still, making and using a model perfectly fitted with the
real anatomy is a difficult task, because it requires large hardware
resources and significant times for processing. That is why it is
necessary to choose the best compromise solution, which keeps the
right balance between the details perfection and the resources
consumption, in order to obtain facial animations with real-time
rendering. We will present here the way in which we achieved such a
3D system that we intend to use as a base point in order to create
facial animations with real-time rendering, used in medicine to find
and to identify different types of pathologies.
Abstract: Perceptions of quality from both designers and users
perspective have now stretched beyond the traditional usability,
incorporating abstract and subjective concepts. This has led to a shift
in human computer interaction research communities- focus; a shift
that focuses on achieving user experience (UX) by not only fulfilling
conventional usability needs but also those that go beyond them. The
term UX, although widely spread and given significant importance,
lacks consensus in its unified definition. In this paper, we survey
various UX definitions and modeling frameworks and examine them
as the foundation for proposing a UX evolution lifecycle framework
for understanding UX in detail. In the proposed framework we identify
the building blocks of UX and discuss how UX evolves in various
phases. The framework can be used as a tool to understand experience
requirements and evaluate them, resulting in better UX design and
hence improved user satisfaction.
Abstract: Photoselective plastic films with thermic properties
are now available so that greenhouses clad with such plastics exhibit
a higher degree of “Greenhouse Effect” with a consequent increase in
night time temperature. In this study, we investigate the potential
benefits of a range of thermic plastic films used as greenhouse cover
materials on the vegetative and reproductive growth and development
of Iceberg lettuce (Lactuca sativa L). Transplants were grown under
thermic films and destructively harvested 4, 5, and 6 weeks after
transplanting. Thermic films can increase night temperatures up to 2
⁰C reducing the wide fluctuation in greenhouse temperature during
winter compared to the standard commercial film and consequently
increased the yield (leaf number, fresh weight, and dry weight) of
lettuce plants. Lettuce plants grown under Clear film respond to cold
stress by the accumulation of secondary products (phenolics, and
flavonoids).
Abstract: This paper investigates the effect of International
Financial Reporting Standards (IFRS) adoption on the frequency of
earnings managements towards small positive profits. We focus on
two emerging markets IFRS adopters: South Africa and Turkey.
We tested our logistic regression using appropriate panelestimation
techniques over a sample of 330 South African and 210
Turkish firm-year observations over the period 2002-2008. Our
results document that mandatory adoption of IFRS is not associated
with a reduction in earnings management towards small positive
profits in emerging markets. These results contradict most of the
previous findings of the studies conducted in developed countries.
Based on the legal system factor, we compare the intensity of
earnings management between a code law country (Turkey) and a
common law country (South Africa) over the pre and post-adoption
periods. Our findings show that the frequency of such earnings
management practice increases significantly for the code law
country.
Abstract: The purpose of this paper is to study Database Models
to use them efficiently in E-commerce websites. In this paper we are
going to find a method which can save and retrieve information in Ecommerce
websites. Thus, semantic web applications can work with,
and we are also going to study different technologies of E-commerce
databases and we know that one of the most important deficits in
semantic web is the shortage of semantic data, since most of the
information is still stored in relational databases, we present an
approach to map legacy data stored in relational databases into the
Semantic Web using virtually any modern RDF query language, as
long as it is closed within RDF. To achieve this goal we study XML
structures for relational data bases of old websites and eventually we
will come up one level over XML and look for a map from relational
model (RDM) to RDF. Noting that a large number of semantic webs
get advantage of relational model, opening the ways which can be
converted to XML and RDF in modern systems (semantic web) is
important.
Abstract: A large amount of valuable information is available in
plain text clinical reports. New techniques and technologies are
applied to extract information from these reports. In this study, we
developed a domain based software system to transform 600
Otorhinolaryngology discharge notes to a structured form for
extracting clinical data from the discharge notes. In order to decrease
the system process time discharge notes were transformed into a data
table after preprocessing. Several word lists were constituted to
identify common section in the discharge notes, including patient
history, age, problems, and diagnosis etc. N-gram method was used
for discovering terms co-Occurrences within each section. Using this
method a dataset of concept candidates has been generated for the
validation step, and then Predictive Apriori algorithm for Association
Rule Mining (ARM) was applied to validate candidate concepts.
Abstract: Sweet cherries (Prunus avium L.) contain various
phenolic compounds which contribute to total antioxidant activity.
Total polyphenols, tannins, flavonoids and anthocyanins, and
antioxidant capacity in a fruits of a number of selected sweet cherry
genotypes were investigated. Total polyphenols content ranged from
4.12 to 8.34 mg gallic acid equivantents/g dry fruit weight and total
tannins content ranged from 0.19 to 1.95 mg gallic acid equivalent/g
dry fruit weight. Total flavonoids were within the range 0.42-1.56 mg
of rutin equivalents/g dry fruit weight and total anthocyanins content
were between 0.35 and 0.69 mg cyanidin 3-glucoside equivalent/ g
dry fruit weight. Although sweet cherry fruits are a significant source
of different phenolic compounds, antioxidant activity of sweet
cherries is not related only with the total polyphenolics, flavonoids or
anthocyanins.