Abstract: In this paper, an approach for finding optimized
layouts for connecting PV units delivering maximum array output
power is suggested. The approach is based on considering the
different varying parameters of PV units that might be extracted from
a general two-diode model. These are mainly, solar irradiation,
reverse saturation currents, ideality factors, series and shunt
resistances in addition to operating temperature. The approach has
been tested on 19 possible 2×3 configurations and allowed to
determine the optimized configurations as well as examine the effects
of the different units- parameters on the maximum output power.
Thus, using this approach, standard arrays with n×m units can be
configured for maximum generated power and allows designing PV
based systems having reduced surfaces to fit specific required power,
as it is the case for solar cars and other mobile systems.
Abstract: Waterlogging reduces shoot and root growth and final
yield of wheat. Waterlogged sites have a combination of low slope,
high rainfall, heavy texture and low permeability. This study was
aimed the importance of waterlogging on root growth and wheat
yield. In order to study the effects of different waterlogging duration
(0, 10, 20 and 30 days) at growth stages (1-leaf stage, tillering stage
and stem elongation stage) on root growth of wheat cultivars
(Chamran, Vee/Nac and Yavaroos), one pot experiment was carried
out. The experiment was a factorial according to a RCBD with three
replications. Results showed that root dry weight and total root
length in the anthesis and grain ripening stages and biological and
grain yields were significantly different between cultivars, growth
stages and waterlogging durations. Vee/Nac was found superior with
respect to other cultivars. Susceptibility to waterlogging at different
growth stages for cultivars was 1-leaf stage > tillering stage > stem
elongation stage. Under waterlogging treatments, grain and
biological yields, were decreased 44.5 and 39.8%, respectively. Root
length and root dry weight were reduced 55.1 and 45.2%,
respectively, too. In this experiment, decrease at root growth because
of waterlogging reduced grain and biological yields. Based on the
results, even short period (10 days) of waterlogging had
unrecoverable effects on the root growth and grain yield of wheat.
Abstract: According to the mobility of the satellite network nodes and the characteristic of management domain dynamic partition in the satellite network, the login and logout mechanism of the satellite network dynamic management domain partition was proposed in the paper. In the mechanism, a ground branch-station sends the packets of login broadcasting to satellites in view. After received the packets, the SNMP agents on the satellites adopt link-delay test to respond. According to the mechanism, the SNMP primitives were extended, and the new added primitives were as follows: broadcasting, login, login confirmation,delay_testing, test responses, and logout. The definition of primitives, which followed RFC1157 criterion, could be encoded by the BER coding. The policy of the dynamic management domain partition on the basis of the login and logout mechanism, which was supported by the SNMP protocol, was realized by the design of the extended primitives.
Abstract: The Principal component regression (PCR) is a
combination of principal component analysis (PCA) and multiple linear regression (MLR). The objective of this paper is to revise the
use of PCR in shortwave near infrared (SWNIR) (750-1000nm) spectral analysis. The idea of PCR was explained mathematically and
implemented in the non-destructive assessment of the soluble solid
content (SSC) of pineapple based on SWNIR spectral data. PCR achieved satisfactory results in this application with root mean
squared error of calibration (RMSEC) of 0.7611 Brix°, coefficient of determination (R2) of 0.5865 and root mean squared error of crossvalidation
(RMSECV) of 0.8323 Brix° with principal components
(PCs) of 14.
Abstract: This paper examines the factors, which determine
R&D outsourcing behaviour at Japanese firms, from the viewpoints of
transaction cost and strategic management, since the latter half of the
1990s. This study uses empirical analysis, which involves the
application of large-sample data. The principal findings of this paper
are listed below. Firms that belong to a wider corporate group are more
active in executing R&D outsourcing activities. Diversification
strategies such as the expansion of product and sales markets have a
positive effect on the R&D outsourcing behaviour of firms. Moreover,
while quantitative R&D resources have positive influences on R&D
outsourcing, qualitative indices have no effect. These facts suggest
that R&D outsourcing behaviour of Japanese firms are consistent with
the two perspectives of transaction cost and strategic management.
Specifically, a conventional corporate group network plays an
important role in R&D outsourcing behaviour. Firms that execute
R&D outsourcing leverage 'old' networks to construct 'new' networks
and use both networks properly.
Abstract: In this study three commercial semiconductor devices
were characterized in the laboratory for computed tomography
dosimetry: one photodiode and two phototransistors. It was evaluated
four responses to the irradiation: dose linearity, energy dependence,
angular dependence and loss of sensitivity after X ray exposure. The
results showed that the three devices have proportional response with
the air kerma; the energy dependence displayed for each device
suggests that some calibration factors would be applied for each one;
the angular dependence showed a similar pattern among the three
electronic components. In respect to the fourth parameter analyzed,
one phototransistor has the highest sensitivity however it also showed
the greatest loss of sensitivity with the accumulated dose. The
photodiode was the device with the smaller sensitivity to radiation,
on the other hand, the loss of sensitivity after irradiation is negligible.
Since high accuracy is a desired feature for a dosimeter, the
photodiode can be the most suitable of the three devices for
dosimetry in tomography. The phototransistors can also be used for
CT dosimetry, however it would be necessary a correction factor due
to loss of sensitivity with accumulated dose.
Abstract: The aim of this paper is to investigate twodimensional unsteady flow of a viscous incompressible fluid about stagnation point on permeable stretching sheet in presence of time dependent free stream velocity. Fluid is considered in the influence of transverse magnetic field in the presence of radiation effect. Rosseland approximation is use to model the radiative heat transfer. Using time-dependent stream function, partial differential equations corresponding to the momentum and energy equations are converted into non-linear ordinary differential equations. Numerical solutions of these equations are obtained by using Runge-Kutta Fehlberg method with the help of Newton-Raphson shooting technique. In the present work the effect of unsteadiness parameter, magnetic field parameter, radiation parameter, stretching parameter and the Prandtl number on flow and heat transfer characteristics have been discussed. Skin-friction coefficient and Nusselt number at the sheet are computed and discussed. The results reported in the paper are in good agreement with published work in literature by other researchers.
Abstract: In order to obtaining the dynamic evolution image of Tungsten array for foam padding, and to research the form of interaction between Tungsten plasma and foam column, a shadow imaging system of four-frame ultraviolet probe laser (266nm)has been designed on 1MA pulse power device. The time resolution of the system is 2.5ns, and static space resolution is superior to 70μm. The radial shadowgraphy image reveals the whole process from the melting and expansion of solid wire to the interaction of the precursor plasma and the foam, from the pinch to rebound inflation. The image shows the continuous interaction of Tungsten plasma and foam in a form of “Raining" within a time of about 50ns, the plasma shell structure has not been found in the whole period of pinch. The quantitative analysis indicates the minimum pinching speed of the foam column is 1.0×106cm/s, and maximum pinching speed is 6.0×106cm/s, and the axial stagnation diameter is approx 1mm.
Abstract: Artemisinin is a potential antimalarial drug effective
against the multidrug resistant forms of Malarial Parasites. The
current production of artemisinin is insufficient to meet the global
demand. In the present study microbial biotransformation of
arteannuin B, a biogenetic precursor of artemisinin to the later has
been investigated. Screening studies carried out on several soil borne
microorganisms have yielded one novel species with the
bioconversion ability. Crude cell free extract of 72h old culture of the
isolate had shown the bioconversion activity. On incubation with the
substrate arteannuin B, crude cell free extract of the isolate had
shown a bioconversion of 18.54% to artemisinin on molar basis with
a specific activity of 0.18 units/mg.
Abstract: An application framework provides a reusable
design and implementation for a family of software systems.
Frameworks are introduced to reduce the cost of a product line
(i.e., family of products that share the common features). Software
testing is a time consuming and costly ongoing activity during the
application software development process. Generating reusable test
cases for the framework applications at the framework
development stage, and providing and using the test cases to test
part of the framework application whenever the framework is used
reduces the application development time and cost considerably.
Framework Interface Classes (FICs) are classes introduced by
the framework hooks to be implemented at the application
development stage. They can have reusable test cases generated at
the framework development stage and provided with the
framework to test the implementations of the FICs at the
application development stage. In this paper, we conduct a case
study using thirteen applications developed using three
frameworks; one domain oriented and two application oriented.
The results show that, in general, the percentage of the number of
FICs in the applications developed using domain frameworks is, on
average, greater than the percentage of the number of FICs in the
applications developed using application frameworks.
Consequently, the reduction of the application unit testing time
using the reusable test cases generated for domain frameworks is,
in general, greater than the reduction of the application unit testing
time using the reusable test cases generated for application
frameworks.
Abstract: The operating control parameters of injection
flushing type of electrical discharge machining process on stainless
steel 304 workpiece with copper tools are being optimized
according to its individual machining characteristic i.e. material
removal rate (MRR). Lower MRR during EDM machining process
may decrease its- machining productivity. Hence, the quality
characteristic for MRR is set to higher-the-better to achieve the
optimum machining productivity. Taguchi method has been used
for the construction, layout and analysis of the experiment for each
of the machining characteristic for the MRR. The use of Taguchi
method in the experiment saves a lot of time and cost of preparing
and machining the experiment samples. Therefore, an L18
Orthogonal array which was the fundamental component in the
statistical design of experiments has been used to plan the
experiments and Analysis of Variance (ANOVA) is used to
determine the optimum machining parameters for this machining
characteristic. The control parameters selected for this
optimization experiments are polarity, pulse on duration, discharge
current, discharge voltage, machining depth, machining diameter
and dielectric liquid pressure. The result had shown that the higher
the discharge voltage, the higher will be the MRR.
Abstract: DNA microarray technology is widely used by
geneticists to diagnose or treat diseases through gene expression.
This technology is based on the hybridization of a tissue-s DNA
sequence into a substrate and the further analysis of the image
formed by the thousands of genes in the DNA as green, red or yellow
spots. The process of DNA microarray image analysis involves
finding the location of the spots and the quantification of the
expression level of these. In this paper, a tool to perform DNA
microarray image analysis is presented, including a spot addressing
method based on the image projections, the spot segmentation
through contour based segmentation and the extraction of relevant
information due to gene expression.
Abstract: The nanotechnology based on epitaxial systems
includes single or arranged misfit dislocations. In general, whatever
is the type of dislocation or the geometry of the array formed by the
dislocations; it is important for experimental studies to know exactly
the stress distribution for which there is no analytical expression [1,
2]. This work, using a numerical analysis, deals with relaxation of
epitaxial layers having at their interface a periodic network of edge
misfit dislocations. The stress distribution is estimated by using
isotropic elasticity. The results show that the thickness of the two
sheets is a crucial parameter in the stress distributions and then in the
profile of the two sheets.
A comparative study between the case of single dislocation and
the case of parallel network shows that the layers relaxed better when
the interface is covered by a parallel arrangement of misfit.
Consequently, a single dislocation at the interface produces an
important stress field which can be reduced by inserting a parallel
network of dislocations with suitable periodicity.
Abstract: An attempt has been made to beneficiate the Indian
coking coal fines by a combination of Spiral, flotation and Oleo
Flotation processes. Beneficiation studies were also carried out on -
0.5mm coal fines using flotation and oleo flotation by splitting at size
0.063mm.Size fraction of 0.5mm-0.063mm and -0.063mm size were
treated in flotation and Oleo flotation respectively. The washability
studies on the fraction 3-0.5 mm indicated that good separation may
be achieved when it is fed in a spiral. Combined product of Spiral,
Flotation and Oleo Flotation has given a significant yield at
acceptable ash%. Studies were also conducted to see the dewatering
of combined product by batch type centrifuge. It may further be
suggested that combination of different processes may be used to
treat the -3 mm fraction in an integrated manner to achieve the yield
at the desired ash level. The treatment of the 3/1 mm -0.5 mm size
fraction by spiral,-0.5-0.63 mm by conventional froth flotation and -
0.063 fractions by oleo flotation may provide a complete solution of
beneficiation and dewatering of coal fines, and can effectively
address the environmental problems caused by coal fines.
Abstract: The High Voltage (HV) transmission mains into the community necessitate earthing design to ensure safety compliance of the system. Concrete poles are widely used within HV transmission mains; which could have an impact on the earth grid impedance and input impedance of the system from the fault point of view. This paper provides information on concrete pole earthing to enhance the split factor of the system; further, it discusses the deployment of concrete structures in high soil resistivity area to reduce the earth grid system of the plant. This paper introduces the cut off soil resistivity SC ρ when replacing timber poles with concrete ones.
Abstract: After Apple's first introduction its smart phone, iPhone
in the end of 2009 in Korea, the number of Korean smarphone users
had been rapidly increasing so that the half of Korean population
became smart phone users as of February, 2012. Currently, smart
phones are positioned as a major digital media with powerful
influences in Korea. And, now, Koreans are leaning new information,
enjoying games and communicating other people every time and
everywhere. As smart phone devices' performances increased, the
number of usable services became more while adequate GUI
developments are required to implement various functions with smart
phones. The strategy to provide similar experiences on smart phones
through familiar features based on employment of existing media's
functions mostly contributed to smart phones' popularization in
connection with smart phone devices' iconic GUIs.
The spread of Smart phone increased mobile web accesses.
Therefore, the attempts to implement PC's web in the smart phone's
web are continuously made. The mobile web GUI provides familiar
experiences to users through designs adequately utilizing the smart
phone's GUIs. As the number of users familiarized to smart phones
and mobile web GUIs, opposite to reversed remediation from many
parts of PCs, PCs are starting to adapt smart phone GUIs.
This study defines this phenomenon as the reversed remediation,
and reviews the reversed remediation cases of Smart phone GUI'
characteristics of PCs. For this purpose, the established study issues
are as under:
· what is the reversed remediation?
· what are the smart phone GUI's characteristics?
· what kind of interrelationship exist s between the smart phone and
PC's web site?
It is meaningful in the forecast of the future GUI's change by
understanding of characteristics in the paradigm changes of PC and
smart phone's GUI designs. This also will be helpful to establish
strategies for digital devices' development and design.
Abstract: It is well known that enhancing interfacial adhesion
between inorganic filler and matrix resin in a composite lead to
favorable properties such as excellent mechanical properties, high
thermal resistance, prominent electric insulation, low expansion
coefficient, and so on. But it should be avoided that much excess of
coupling agent is reacted due to a negative impact of their final
composite-s properties. There is no report to achieve classification of
the bonding state excepting investigation of coating layer thickness.
Therefore, the analysis of the bonding state of the coupling agent
reacted with the filler surface such as BN particles with less functional
group and silica particles having much functional group was
performed by thermal gravimetric analysis and pyrolysis GC/MS. The
reacted number of functional groups on the silane-coupling agent was
classified as a result of the analysis. Thus, we succeeded in classifying
the reacted number of the functional groups as a result of this study.
Abstract: The study attempted to identify the dominant
intelligences of athletes by comparing the developmental differences
of multiple intelligences between athletes and non-athletes. The
weekly specialized training hours and years of specialized training
was examined to see how it can predict the dominant intelligence with
the age factor controlled. There were 355 participants in the research
(202 athletes and 153 non-athletes). Collected data were analyzed with
one-way MANOVA and multiple hierarchical regression. The results
suggested the dominant intelligences of athletes were Interpersonal
Intelligence, Bodily-Kinesthetic Intelligence, and Intrapersonal
Intelligence. The weekly specialized training hours and years of
specialized training could effectively predict the Interpersonal
Intelligence, Bodily-Kinesthetic Intelligence, and Intrapersonal
Intelligence of athletes. The author suggested the future studies could
focus on the theory construction of weekly specialized training and
years of specialized training. Also, the studies on using “Bridge
strategy" by the athletes to guide disadvantage intelligences with
dominant intelligences are highly valued.
Abstract: Research in e-Business has been growing
tremendously covering all related aspects such as adoption issues, e-
Business models, strategies, etc. This research aims to explore the
potential of adopting e-Business for a micro size business operating
from home called home-based businesses (HBBs). In Malaysia, the
HBB industry started many years ago and were mostly monopolized
by women or housewives managed as a part-time job to support their
family economy. Today, things have changed. The availability of the
Internet technology and the emergence of e-Business concept
promote the evolution of HBBs, which have been adopted as another
alternative as a professional career for women without neglecting
their family needs especially the children. Although this study is
confined to a limited sample size and within geographical biasness,
the findings show that it concurs with previous large scale studies. In
this study, both qualitative and quantitative methods were used and
data were gathered using triangulation methods via interview, direct
observation, document analysis and survey questionnaires. This paper
discusses the literature review, research methods and findings
pertaining to e-Business adoption factors that influence the HBBs in
Malaysia.
Abstract: The present disposal routes of sewage sludge represent a critical environmental issue in Egypt. Recently, there has been an increasing concern about sewage sludge management due to the environmental risks, which resulted from the fast expansion of wastewater treatment plants without equal attention in dealing with the produced sludge. This paper discusses the current situation of sewage sludge management in Egypt presenting a brief overview of the existing wastewater treatment plants, sludge production and characteristics as well as options of beneficial use and potential demand of sewage sludge under Egyptian conditions. The characteristics of sewage sludge are discussed considering the results of own sampling and analysis as well as previous studies. Furthermore, alternative treatment scenarios for sewage sludge, which have been recently developed in Egypt, are discussed and perspectives for a sustainable agricultural use are outlined.