Abstract: Fast depth estimation from binocular vision is often
desired for autonomous vehicles, but, most algorithms could not easily
be put into practice because of the much time cost. We present an
image-processing technique that can fast estimate depth image from
binocular vision images. By finding out the lines which present the
best matched area in the disparity space image, the depth can be
estimated. When detecting these lines, an edge-emphasizing filter is
used. The final depth estimation will be presented after the smooth
filter. Our method is a compromise between local methods and global
optimization.
Abstract: Vacuum membrane distillation (VMD) process can be
used for water purification or the desalination of salt water. The
process simply consists of a flat sheet hydrophobic micro porous
PTFE membrane and diaphragm vacuum pump without a condenser
for the water recovery or trap. The feed was used aqueous NaCl
solution. The VMD experiments were performed to evaluate the heat
and mass transfer coefficient of the boundary layer in a membrane
module. The only operating parameters are feed inlet temperature,
and feed flow rate were investigated. The permeate flux was strongly
affected by the feed inlet temperature, feed flow rate, and boundary
layer heat transfer coefficient. Since lowering the temperature
polarization coefficient is essential enhance the process performance
considerable and maximizing the heat transfer coefficient for
maximizes the mass flux of distillate water. In this paper, the results
of VMD experiments are used to measure the boundary layer heat
transfer coefficient, and the experimental results are used to reevaluate
the empirical constants in the Dittus- Boelter equation.
Abstract: In Grid computing, a data transfer protocol called
GridFTP has been widely used for efficiently transferring a large volume
of data. Currently, two versions of GridFTP protocols, GridFTP
version 1 (GridFTP v1) and GridFTP version 2 (GridFTP v2), have
been proposed in the GGF. GridFTP v2 supports several advanced
features such as data streaming, dynamic resource allocation, and
checksum transfer, by defining a transfer mode called X-block mode.
However, in the literature, effectiveness of GridFTP v2 has not been
fully investigated. In this paper, we therefore quantitatively evaluate
performance of GridFTP v1 and GridFTP v2 using mathematical
analysis and simulation experiments. We reveal the performance
limitation of GridFTP v1, and quantitatively show effectiveness of
GridFTP v2. Through several numerical examples, we show that by
utilizing the data streaming feature, the average file transfer time of
GridFTP v2 is significantly smaller than that of GridFTP v1.
Abstract: The paper outlines the relevance of computational
geometry within the design and production process of architecture.
Based on two case studies, the digital chain - from the initial formfinding
to the final realization of spatial concepts - is discussed in
relation to geometric principles. The association with the fascinating
complexity that can be found in nature and its underlying geometry
was the starting point for both projects presented in the paper. The
translation of abstract geometric principles into a three-dimensional
digital design model – realized in Rhinoceros – was followed by a
process of transformation and optimization of the initial shape that
integrated aesthetic, spatial and structural qualities as well as aspects
of material properties and conditions of production.
Abstract: Heart-s electric field can be measured anywhere on
the surface of the body (ECG). When individuals touch, one person-s
ECG signal can be registered in other person-s EEG and elsewhere
on his body. Now, the aim of this study was to test the hypothesis
that physical contact (hand-holding) of two persons changes their
heart rate variability. Subjects were sixteen healthy female (age: 20-
26) which divided into eight sets. In each sets, we had two friends
that they passed intimacy test of J.sternberg. ECG of two subjects
(each set) acquired for 5 minutes before hand-holding (as control
group) and 5 minutes during they held their hands (as experimental
group). Then heart rate variability signals were extracted from
subjects' ECG and analyzed in linear feature space (time and
frequency domain) and nonlinear feature space. Considering the
results, we conclude that physical contact (hand-holding of two
friends) increases parasympathetic activity, as indicate by increase
SD1, SD1/SD2, HF and MF power (p
Abstract: We studied the evolution of elliptic heavy SF6
gas cylinder surrounded by air when accelerated by a planar
Mach 1.25 shock. A multiple dynamics imaging technology has
been used to obtain one image of the experimental initial
conditions and five images of the time evolution of elliptic
cylinder. We compared the width and height of the circular and
two kinds of elliptic gas cylinders, and analyzed the vortex
strength of the elliptic ones. Simulations are in very good
agreement with the experiments, but due to the different initial
gas cylinder shapes, a certain difference of the initial density
peak and distribution exists between the circular and elliptic
gas cylinders, and the latter initial state is more sensitive and
more inenarrable.
Abstract: Cell phone forensics to acquire and analyze data in the
cellular phone is nowadays being used in a national investigation
organization and a private company. In order to collect cellular phone
flash memory data, we have two methods. Firstly, it is a logical
method which acquires files and directories from the file system of the
cell phone flash memory. Secondly, we can get all data from bit-by-bit
copy of entire physical memory using a low level access method. In
this paper, we describe a forensic tool to acquire cell phone flash
memory data using a logical level approach. By our tool, we can get
EFS file system and peek memory data with an arbitrary region from
Korea CDMA cell phone.
Abstract: As an adult man and woman love each other and come to have faith in each other as their spouse, they marry each other. Recently people-s economic life has become individualized and women are enjoying a high education level and increased participation in social activities, and these changes are creating environment favorable for single life. Thus, an increasing number of people are choosing celibacy, and many people prefer cohabitation to marriage. Nevertheless, marriage is still regarded as a must-to-do in our thought. Most of people throughout the world admit marriage as one of natural processes of life, and is an important passage rite in life that all people experience as we can see everywhere in the world despite the diversity of lifestyles. With regard to wedding ceremony, however, each country and culture has its own unique tradition and style of festival. It is not just a congratulatory ceremony but contains multiple concepts representing the age, country or culture. Moreover, the form and contents of wedding ceremony changes over time, and such features of wedding ceremony are well represented in films. This study took note of the fact that films reflect and reproduce each country-s historicity, culturality and analyzed four films, which are believed to show differences between Eastern and Western wedding ceremonies. The selected films are: A Perfect Match (2002), Marriage Is a Crazy Thing (2001), Bride Wars (2009) and 27 Dresses (2008). The author attempted to examine wedding ceremonies described in the four films, differences between the East and the West suggested by the films, and changes in their societies.
Abstract: For most image fusion algorithms separate
relationship by pixels in the image and treat them more or less
independently. In addition, they have to be adjusted different
parameters in different time or weather. In this paper, we propose a
region–based image fusion which combines aspects of feature and
pixel-level fusion method to replace only by pixel. The basic idea is
to segment far infrared image only and to add information of each
region from segmented image to visual image respectively. Then we
determine different fused parameters according different region. At
last, we adopt artificial neural network to deal with the problems of
different time or weather, because the relationship between fused
parameters and image features are nonlinear. It render the fused
parameters can be produce automatically according different states.
The experimental results present the method we proposed indeed
have good adaptive capacity with automatic determined fused
parameters. And the architecture can be used for lots of applications.
Abstract: An array antenna system with innovative signal
processing can improve the resolution of a source direction of arrival
(DoA) estimation. High resolution techniques take the advantage of
array antenna structures to better process the incoming waves. They
also have the capability to identify the direction of multiple targets.
This paper investigates performance of the DOA estimation
algorithm namely; Capon and MUSIC on the uniform linear array
(ULA). The simulation results show that in Capon and MUSIC
algorithm the resolution of the DOA techniques improves as number
of snapshots, number of array elements, signal-to-noise ratio and
separation angle between the two sources θ increases.
Abstract: In wireless sensor networks,the mobile agent technology is used in data fusion. According to the node residual energy and the results of partial integration,we design the node clustering algorithm. Optimization of mobile agent in the routing within the cluster strategy for wireless sensor networks to further reduce the amount of data transfer. Through the experiments, using mobile agents in the integration process within the cluster can be reduced the path loss in some extent.
Abstract: This paper has presented research in progress
concerning the contribution of target costing approach to
achievement competitive price in the Iraqi firm. The title of the
paper is one of the subjects that get large concerns in the finance and
business world in the present time. That is because many competitive
firms have appeared in the regional and global markets and the rapid
changes that covered all fields of life. On the other hand, this paper
concentrated on lack knowledge of the industrial firms, regarding the
significant role of target cost for achieving the competitive prices.
The paper depends on the main supposition, using the competitive
price to get the target cost in the industrial firms. In order to achieve
competitive advantage in business world the firms should rely on
modern methods to manage cost and profit. From strategic
perspective the target cost achieves a so powerful competitive
advantage represented in cost reduction. Nevertheless the target cost
does not exclude the calculation and survey of costs during the
production process. Products- estimated costs are calculated and
compared with the target costs.
Abstract: We evaluated the effect of sensory (direct current
(DC), 600μA) and motor (monophasic current, pulse duration 300μs,
100 Hz, 2.5-3mA) intensities of cathodal electrical stimulation (ES)
current to release VEGF and biomechanical properties of wound. 54
male Sprague-dawley rats were randomly assigned into one control
and two experimental groups. A full thickness skin incision was
made on animals- dorsal region. The experimental groups received
ES for 1h/day and every other day. VEGF expression was measured
in skin on the 7th day after surgical incision and tensile strength was
measured on 21st day. On the 7th day, the values of skin VEGF in the
sensory group were significantly greater than those of the other
groups (p < 0.05). Sensory and Motor intensity stimulation, can not
improve the biomechanical properties of the repaired wounds.
It seems the mechanical environment induced by sensory and
motor intensity of electrical stimulation, could not simulate the role
of normal daily stress and strain to maturation of collagen fibers and
their cross links. Further work is needed to determine the relationship
between VEGF expression after ES and its effect on tensile strength
of healed wound.
Abstract: The charge-exchange xenon (CEX) ion generated by ion thruster can backflow to the surface of spacecraft and threaten to the safety of spacecraft operation. In order to evaluate the effects of the induced plasma environment in backflow regions on the spacecraft, we designed a spherical single Langmuir probe of 5.8cm in diameter for measuring low-density plasma parameters in backflow region of ion thruster. In practice, the tests are performed in a two-dimensional array (40cm×60cm) composed of 20 sites. The experiment results illustrate that the electron temperature ranges from 3.71eV to 3.96eV, with the mean value of 3.82eV and the standard deviation of 0.064eV. The electron density ranges from 8.30×1012/m3 to 1.66×1013/m3, with the mean value of 1.30×1013/m3 and the standard deviation of 2.15×1012/m3. All data is analyzed according to the “ideal" plasma conditions of Maxwellian distributions.
Abstract: Some physico-chemical characteristics and mineral
composition of 'Karayemis' (Prunus laurocerasus L.) fruits which
grown naturally in Norteast Turkey was studied. 28 minerals ( Al,
Mg, B, Mn, Co, Na, Ca, Ni, Cd, P, Cr, Pb, Cu, S, Fe, Zn, K, Sr, Li,
As, V, Ag, Ba, Br, Ga, In, Se, Ti) were analyzed and 19 minerals
were present at ascertainable levels. Karayemis fruit was richest in
potassium (7938.711 ppm), magnesium (1242.186 ppm) and calcium
(1158.853 ppm). And some physico-chemical characteristics of
Karayemis fruit was investigated. Fruit length, fruit width, fruit
thickness, fruit weight, total soluble solids, colour, protein, crude ash,
crude fiber, crude oil values were determined as 2.334 cm, 1.884 cm,
2.112 cm, 5.35 g, 20.1 %, S99M99Y99, 0.29 %, 0.22 %, 6.63 % and
0.001 %, respectively. The seed of fruit mean weight, length, width
and thickness were found to be 0.41 g, 1.303 cm, 0.921 cm and
0.803, respectively.
Abstract: A new approach for facial expressions recognition based on face context and adaptively weighted sub-pattern PCA (Aw-SpPCA) has been presented in this paper. The facial region and others part of the body have been segmented from the complex environment based on skin color model. An algorithm has been proposed to accurate detection of face region from the segmented image based on constant ratio of height and width of face (δ= 1.618). The paper also discusses on new concept to detect the eye and mouth position. The desired part of the face has been cropped to analysis the expression of a person. Unlike PCA based on a whole image pattern, Aw-SpPCA operates directly on its sub patterns partitioned from an original whole pattern and separately extracts features from them. Aw-SpPCA can adaptively compute the contributions of each part and a classification task in order to enhance the robustness to both expression and illumination variations. Experiments on single standard face with five types of facial expression database shows that the proposed method is competitive.
Abstract: This paper presents a linear-elastic finite element method based flattening algorithm for three dimensional triangular surfaces. First, an intrinsic characteristic preserving method is used to obtain the initial developing graph, which preserves the angles and length ratios between two adjacent edges. Then, an iterative equation is established based on linear-elastic finite element method and the flattening result with an equilibrium state of internal force is obtained by solving this iterative equation. The results show that complex surfaces can be dealt with this proposed method, which is an efficient tool for the applications in computer aided design, such as mould design.
Abstract: There have been widespread applications of fluidized beds in industries which are related to the combination of gas-solid particles during the last decade. For instance, in order to crack the catalyses in petrochemical industries or as a drier in food industries. High capacity of fluidized bed in heat and mass transfer has made this device very popular. In order to achieve a higher efficiency of fluidized beds, a particular attention has been paid to beds with pulsating air flow. In this paper, a fluidized bed device with pulsating flow has been designed and constructed. Size of particles have been used during the test are in the range of 40 to 100μm. The purpose of this experimental test is to investigate the air flow regime, observe the particles- movement and measure the pressure loss along the bed. The effects of pulsation can be evaluated by comparing the results for both continuous and pulsating flow. Results of both situations are compared for various gas speeds. Moreover the above experiment is numerically simulated by using Fluent software and its numerical results are compared with the experimental results.
Abstract: The computer has become an essential tool in modern
life, and the combined use of a computer with a projector is very
common in teaching and presentations. However, as typical computer
operating devices involve a mouse or keyboard, when making
presentations, users often need to stay near the computer to execute
functions such as changing pages, writing, and drawing, thus, making
the operation time-consuming, and reducing interactions with the
audience. This paper proposes a laser pointer interaction system able
to simulate mouse functions in order that users need not remain near
the computer, but can directly use laser pointer operations from at a
distance. It can effectively reduce the users- time spent by the
computer, allowing for greater interactions with the audience.
Abstract: Recently electric vehicles are becoming popular as an
alternative of conventional fossil fuel vehicles. Conventional Internal
Combustion Engine (ICE) vehicle uses fossil fuel which contributing
a major part of overall carbon emission in the environment. Carbon
and other green house gas emission are responsible for global
warming and resulting climate change. It becomes vital to evaluate
performance of vehicle based on emission. In this paper an effort has
been made to depict the picture of emission caused by vehicle and
scenario of Australia has taken into account. Effort has been made to
compare the fossil based vehicle with electric vehicle in phases. The
study also evaluates advancement in electric vehicle technology,
required infrastructure for sustainability and future scope of
developments. This paper also includes the evaluation of electric
vehicle concept for pollution control and sustainable transport
systems in future. This study can be a benchmark for development of
electric vehicle as low carbon emission alternative for the cities of
tomorrow.