Abstract: Information is power. Geographical information is an
emerging science that is advancing the development of knowledge to
further help in the understanding of the relationship of “place" with
other disciplines such as crime. The researchers used crime data for
the years 2004 to 2007 from the Baguio City Police Office to
determine the incidence and actual locations of crime hotspots.
Combined qualitative and quantitative research methodology was
employed through extensive fieldwork and observation, geographic
visualization with Geographic Information Systems (GIS) and Global
Positioning Systems (GPS), and data mining. The paper discusses
emerging geographic visualization and data mining tools and
methodologies that can be used to generate baseline data for
environmental initiatives such as urban renewal and rejuvenation.
The study was able to demonstrate that crime hotspots can be
computed and were seen to be occurring to some select places in the
Central Business District (CBD) of Baguio City. It was observed that
some characteristics of the hotspot places- physical design and milieu
may play an important role in creating opportunities for crime. A list
of these environmental attributes was generated. This derived
information may be used to guide the design or redesign of the urban
environment of the City to be able to reduce crime and at the same
time improve it physically.
Abstract: Paper presents simple sixport principle and its frequency bandwidth. The novel multisixport approach is presented with its possibilities, typical parameters and frequency bandwidth. Practical implementation is shown with its measurement parameters and calibration. The bandwidth circa 1:100 is obtained.
Abstract: Physical urban form is recognized to be the media for
human transactions. It directly influences the travel demand of people
in a specific urban area and the amount of energy used for
transportation. Distorted, sprawling form often creates sustainability
problems in urban areas. It is declared in EU strategic planning
documents that compact urban form and mixed land use pattern must
be given the main focus to achieve better sustainability in urban
areas, but the methods to measure and compare these characteristics
are still not clear.
This paper presents the simple methods to measure the spatial
characteristics of urban form by analyzing the location and
distribution of objects in an urban environment. The extended CA
(cellular automata) model is used to simulate urban development
scenarios.
Abstract: A numerical study is presented on buckling and post
buckling behaviour of laminated carbon fiber reinforced plastic
(CFRP) thin-walled cylindrical shells under axial compression using
asymmetric meshing technique (AMT). Asymmetric meshing
technique is a perturbation technique to introduce disturbance without
changing geometry, boundary conditions or loading conditions.
Asymmetric meshing affects predicted buckling load, buckling mode
shape and post-buckling behaviour. Linear (eigenvalue) and nonlinear
(Riks) analyses have been performed to study the effect of
asymmetric meshing in the form of a patch on buckling behaviour.
The reduction in the buckling load using Asymmetric meshing
technique was observed to be about 15%. An isolated dimple formed
near the bifurcation point and the size of which increased to reach a
stable state in the post-buckling region. The load-displacement curve
behaviour applying asymmetric meshing is quite similar to the curve
obtained using initial geometric imperfection in the shell model.
Abstract: The major urban centers are all facing rapid growth is
most often associated with spreading urbanization, social status of the
car has also changed: it has become a commodity of mass
consumption. There are currently about 5 million and 260 cars in
Algeria (2008), this number increases every year 200,000 new cars.
These phenomena induce a demand for greater mobility and a
significant need for transport infrastructure. Faced with these
problems and development of the growing use of the automobile,
central governments and local authorities in charge of urban transport
issues are aware of the need to develop their urban transport systems
but often lack opportunities.
Urban Transport Plans (PDU) were born in reaction to the "culture
of automobile." Their existence in the world the '80s, however, they
had little success before laws on air and rational use of energy in 90
years does not alter substantially their content and make mandatory
their implementation in cities of over 100,000 inhabitants (Abroad)
[1].
The objective of this work is to use the tool and specifically
Geomatics techniques as decision support in the organization and
management of travel while taking into consideration the influence,
which will then translate by National Urban Transport Plan.
Abstract: Open urban public spaces comprise an important
element for the development of social, cultural and economic
activities of the population in the modern cities. These spaces are also
considered regulators of the region-s climate conditions, providing
better thermal, visual and auditory conditions which can be optimized
by the application of appropriate strategies of bioclimatic design. The
paper focuses on the analysis and evaluation of the recent unification
of the open spaces in the centre of Xanthi, a medium – size city in
northern Greece, from a bioclimatic perspective, as well as in the
creation of suitable methodology. It is based both on qualitative
observation of the interventions by fieldwork research and
assessment and on quantitative analysis and modeling of the research
area.
Abstract: Identifying and classifying intersections according to
severity is very important for implementation of safety related
counter measures and effective models are needed to compare and
assess the severity. Highway safety organizations have considered
intersection safety among their priorities. In spite of significant
advances in highways safety, the large numbers of crashes with high
severities still occur in the highways. Investigation of influential
factors on crashes enables engineers to carry out calculations in order
to reduce crash severity. Previous studies lacked a model capable of
simultaneous illustration of the influence of human factors, road,
vehicle, weather conditions and traffic features including traffic
volume and flow speed on the crash severity. Thus, this paper is
aimed at developing the models to illustrate the simultaneous
influence of these variables on the crash severity in urban highways.
The models represented in this study have been developed using
binary Logit Models. SPSS software has been used to calibrate the
models. It must be mentioned that backward regression method in
SPSS was used to identify the significant variables in the model.
Consider to obtained results it can be concluded that the main
factor in increasing of crash severity in urban highways are driver
age, movement with reverse gear, technical defect of the vehicle,
vehicle collision with motorcycle and bicycle, bridge, frontal impact
collisions, frontal-lateral collisions and multi-vehicle crashes in
urban highways which always increase the crash severity in urban
highways.
Abstract: It is estimated that the total cost of abnormal
conditions to US process industries is around $20 billion dollars in
annual losses. The hydrotreatment (HDT) of diesel fuel in petroleum
refineries is a conversion process that leads to high profitable
economical returns. However, this is a difficult process to control
because it is operated continuously, with high hydrogen pressures
and it is also subject to disturbances in feed properties and catalyst
performance. So, the automatic detection of fault and diagnosis plays
an important role in this context. In this work, a hybrid approach
based on neural networks together with a pos-processing
classification algorithm is used to detect faults in a simulated HDT
unit. Nine classes (8 faults and the normal operation) were correctly
classified using the proposed approach in a maximum time of 5
minutes, based on on-line data process measurements.
Abstract: Recently global concerns for the energy security have
steadily been on the increase and are expected to become a major
issue over the next few decades. Energy security refers to a resilient
energy system. This resilient system would be capable of
withstanding threats through a combination of active, direct security
measures and passive or more indirect measures such as redundancy,
duplication of critical equipment, diversity in fuel, other sources of
energy, and reliance on less vulnerable infrastructure. Threats and
disruptions (disturbances) to one part of the energy system affect
another. The paper presents methodology in theoretical background
about energy system as an interconnected network and energy supply
disturbances impact to the network. The proposed methodology uses
a network flow approach to develop mathematical model of the
energy system network as the system of nodes and arcs with energy
flowing from node to node along paths in the network.
Abstract: It is necessary to evaluate the bridges conditions and
strengthen bridges or parts of them. The reinforcement necessary due
to some reasons can be summarized as: First, a changing in use of
bridge could produce internal forces in a part of structural which
exceed the existing cross-sectional capacity. Second, bridges may
also need reinforcement because damage due to external factors
which reduced the cross-sectional resistance to external loads. One of
other factors could listed here its misdesign in some details, like
safety of bridge or part of its.This article identify the design demands
of Qing Shan bridge located in is in Heilongjiang Province He gang -
Nen Jiang Road 303 provincial highway, Wudalianchi area, China, is
an important bridge in the urban areas. The investigation program
was include the observation and evaluate the damage in T- section
concrete beams , prestressed concrete box girder bridges section in
additional evaluate the whole state of bridge includes the pier ,
abutments , bridge decks, wings , bearing and capping beam, joints,
........etc. The test results show that the bridges in general structural
condition are good. T beam span No 10 were observed, crack
extended upward along the ribbed T beam, and continue to the T
beam flange. Crack width varying between 0.1mm to 0.4mm, the
maximum about 0.4mm. The bridge needs to be improved flexural
bending strength especially at for T beam section.
Abstract: Rural tourism has many economical, environmental, and socio-cultural benefits. However, the development of rural tourism compared to urban tourism is also faced with several challenges added to the disadvantages of rural tourism. The aim of this study is to design a model of the factors affecting the motivations of rural tourists, in an attempt to improve the understanding of rural tourism motivation for the development of that form of tourism. The proposed model is based on a sound theoretical framework. It was designed following a literature review of tourism motivation theoretical frameworks and of rural tourism motivation factors. The tourism motivation theoretical framework that fitted to the best all rural tourism motivation factors was then chosen as the basis for the proposed model. This study hence found that the push and pull tourism motivation framework and the inner and outer directed values theory are the most adequate theoretical frameworks for the modeling of rural tourism motivation.
Abstract: Recently, Cassava has been the driving force of many
developing countries- economic progress. To attain this level,
prerequisites were put in place enabling cassava sector to become an
industrial and a highly competitive crop. Cameroon can achieve the
same results. Moreover, it can upgrade the living conditions of both
rural and urban dwellers and stimulate the development of the whole
economy. Achieving this outcome calls for agricultural policy
reforms. The adoption and implementation of adequate policies go
along with efficient strategies. To choose effective strategies, an indepth
investigation of the sector-s problems is highly recommended.
This paper uses gap analysis method to evaluate cassava sector in
Cameroon. It studies the present situation (where it is now),
interrogates the future (where it should be) and finally proposes
solutions to fill the gap.
Abstract: Rapid enlargement and physical development of cities
have facilitated the emergence of a number of city life crises and
decrease of environment quality. Subsequently, the need for noticing
the concept of quality and its improvement in urban environments,
besides quantitative issues, is obviously recognized. In the domain of
urban ideas the importance of taking these issues into consideration
is obvious not only in accordance to sustainable development
concepts and improvement of public environment quality, but also in
the enhancement of social and behavioral models.
The major concern of present article is to study the nature of urban
environment quality in urban development plans, which is important
not only in the concept and the aim of projects but also in their
execution procedure. As a result, this paper is going to utilize
planning capacities caused by environmental virtues in the planning
procedure of Moft Abad neighborhood. Thus, at the first step,
applying the Analytical Hierarchy Process (AHP), it has assessed
quantitative environmental issues. The present conditions of Moft
Abad state that “the neighborhood is generally suffering from the
lack of qualitative parameters, and the previously formed planning
procedures could not take the sustainable and developmental paths
which are aimed at environment quality virtues." The diminution of
economical and environmental virtues has resulted in the diminution
of residential and social virtues. Therefore, in order to enhance the
environment quality in Moft Abad, the present paper has tried to
supply the subject plans in order to make a safe, healthy, and lively
neighborhood.
Abstract: Voltage flicker is a disturbance in electrical power
systems. The reason for this disturbance is mainly the large nonlinear
loads such as electric arc furnaces. Synchronous static
compensator (STATCOM) is considered as a proper technique to
mitigate the voltage flicker. Application of more suitable and precise
power electronic converter leads to a more precise performance of the
compensator. In this paper a three-level 12-pulse voltage source
inverter (VSI) with a 12-terminal transformer connected to the ac
system is studied and the obtained results are compared with the
performance of a STATCOM using a simple two-level VSI and an
optimal and more precise performance of the proposed scheme is
achieved.
Abstract: The recurring decimal of rural and urban poverty in
Nigeria, resulting from lack of sustainable livelihood activities by
the people due to non-diversification of the economy, necessitated
this study. One hundred snail farmers were randomly selected in
Akure North and Akure South Local Government areas of Ondo
State, Southwest Nigeria where snail farming is widely practised.
Data collection was through questionnaires administration and onsite
observation of farms. Data obtained were subjected to
descriptive statistics, Student-s t-test and regression analysis. Cost
benefit ratio (CBR) and rate of return on investment (RORI) were
calculated in order to determine the poverty alleviation potentials of
snail farming in the study areas. Although snail farming was
profitable and viable, it was below poverty line. With time and more
knowledge in its farming activities, and with more people taking to
snail production, its poverty alleviation and reduction potentials will
increase.
Abstract: Suburban area is an important area to the development of a city and a country. Russias economy is going through major transitions. These transitions are rapidly changing the relationship between cities (urban areas), countryside (rural areas) and the development, growth, and popularity of suburbia. The process of suburbanization takes place in biggest cities of Russia, including Krasnoyarsk City. The modern Krasnoyarsk with a population of about 1mln people occupies the territory of 34115 ha. This article examines the analysis of functions of suburban area and connects these functions with zoning of the suburban territory. The author uses the method of hierarchy to select the best conditions to each function in connection with nature component, transportation and distance from the city. The result of this research is the map of the functional zoning of suburban area of Krasnoyarsk City. The author uses a variety of factors, which have an influence on suburban area, to compare and choose the best conditions. KeywordsSuburban area, zoning of territory, Krasnoyarsk City.
Abstract: The artificial intelligent controller in power system
plays as most important rule for many applications such as system
operation and its control specially Load Frequency Controller (LFC).
The main objective of LFC is to keep the frequency and tie-line power
close to their decidable bounds in case of disturbance. In this paper,
parallel fuzzy PI adaptive with conventional PD technique for Load
Frequency Control system was proposed. PSO optimization method
used to optimize both of scale fuzzy PI and tuning of PD. Two equal
interconnected power system areas were used as a test system.
Simulation results show the effectiveness of the proposed controller
compared with different PID and classical fuzzy PI controllers in terms
of speed response and damping frequency.
Abstract: Palestinian cities face the challenges of land scarcity,
high population growth rates, rapid urbanization, uneven
development and territorial fragmentation. Due to geopolitical
constrains and the absence of an effective Palestinian planning
institution, urban development in Palestinian cities has not followed
any discernable planning scheme. This has led to a number of
internal contradictions in the structure of cities, and adversely
affected land use, the provision of urban services, and the quality of
the living environment.
This paper explores these challenges, and the potential that exists
for introducing a more sustainable urban development pattern in
Palestinian cities. It assesses alternative development approaches
with a particular focus on sustainable development, promoting ecodevelopment
imperatives, limiting random urbanization, and meeting
present and future challenges, including fulfilling the needs of the
people and conserving the scarce land and limited natural resources.
This paper concludes by offering conceptual proposals and guidelines
for promoting sustainable physical development in Palestinian cities.
Abstract: The use of power system stabilizers (PSSs) to damp
power system swing mode of oscillations is practical important. Our
purpose is to retune the power system stabilizer (PSS1A) parameters
in Unitrol D produced by ABB– was installed in 1995in Benghazi
North Power Plants (BNPPs) at General Electricity Company of
Libya (GECOL). The optimal values of the power system stabilizer
(PSS1A) parameters are determined off-line by a particle swarm
optimization technique (PSO). The objective is to damp the local and
inter-area modes of oscillations that occur following power system
disturbances. The retuned power system stabilizer (PSS1A) can cope
with large disturbance at different operating points and has enhanced
power system stability.
Abstract: In this paper, the modified optimal sliding mode control with a proposed method to design a sliding surface is presented. Because of the inability of the previous approach of the sliding mode method to design a bounded and suitable input, the new variation is proposed in the sliding manifold to obviate problems in a structural system. Although the sliding mode control is a powerful method to reject disturbances and noises, the chattering problem is not good for actuators. To decrease the chattering phenomena, the optimal control is added to the sliding mode control. Not only the proposed method can decline the intense variations in the inputs of the system but also it can produce the efficient responses respect to the sliding mode control and optimal control that are shown by performing some numerical simulations.