Abstract: This paper presents a cold flow simulation study of a small gas turbine combustor performed using laboratory scale test rig. The main objective of this investigation is to obtain physical insight of the main vortex, responsible for the efficient mixing of fuel and air. Such models are necessary for predictions and optimization of real gas turbine combustors. Air swirler can control the combustor performance by assisting in the fuel-air mixing process and by producing recirculation region which can act as flame holders and influences residence time. Thus, proper selection of a swirler is needed to enhance combustor performance and to reduce NOx emissions. Three different axial air swirlers were used based on their vane angles i.e., 30°, 45°, and 60°. Three-dimensional, viscous, turbulent, isothermal flow characteristics of the combustor model operating at room temperature were simulated via Reynolds- Averaged Navier-Stokes (RANS) code. The model geometry has been created using solid model, and the meshing has been done using GAMBIT preprocessing package. Finally, the solution and analysis were carried out in a FLUENT solver. This serves to demonstrate the capability of the code for design and analysis of real combustor. The effects of swirlers and mass flow rate were examined. Details of the complex flow structure such as vortices and recirculation zones were obtained by the simulation model. The computational model predicts a major recirculation zone in the central region immediately downstream of the fuel nozzle and a second recirculation zone in the upstream corner of the combustion chamber. It is also shown that swirler angles changes have significant effects on the combustor flowfield as well as pressure losses.
Abstract: Reducing energy consumption of embedded systems requires careful memory management. It has been shown that Scratch- Pad Memories (SPMs) are low size, low cost, efficient (i.e. energy saving) data structures directly managed at the software level. In this paper, the focus is on heuristic methods for SPMs management. A method is efficient if the number of accesses to SPM is as large as possible and if all available space (i.e. bits) is used. A Tabu Search (TS) approach for memory management is proposed which is, to the best of our knowledge, a new original alternative to the best known existing heuristic (BEH). In fact, experimentations performed on benchmarks show that the Tabu Search method is as efficient as BEH (in terms of energy consumption) but BEH requires a sorting which can be computationally expensive for a large amount of data. TS is easy to implement and since no sorting is necessary, unlike BEH, the corresponding sorting time is saved. In addition to that, in a dynamic perspective where the maximum capacity of the SPM is not known in advance, the TS heuristic will perform better than BEH.
Abstract: The various types of frequent pattern discovery
problem, namely, the frequent itemset, sequence and graph mining
problems are solved in different ways which are, however, in certain
aspects similar. The main approach of discovering such patterns can
be classified into two main classes, namely, in the class of the levelwise
methods and in that of the database projection-based methods.
The level-wise algorithms use in general clever indexing structures
for discovering the patterns. In this paper a new approach is proposed
for discovering frequent sequences and tree-like patterns efficiently
that is based on the level-wise issue. Because the level-wise
algorithms spend a lot of time for the subpattern testing problem, the
new approach introduces the idea of using automaton theory to solve
this problem.
Abstract: Textile structures are engineered and fabricated to
meet worldwide structural applications. Nevertheless, research
varying textile structure on natural fibre as composite reinforcement
was found to be very limited. Most of the research is focusing on
short fibre and random discontinuous orientation of the reinforcement
structure. Realizing that natural fibre (NF) composite had been
widely developed to be used as synthetic fibre composite
replacement, this research attempted to examine the influence of
woven and cross-ply laminated structure towards its mechanical
performances. Laminated natural fibre composites were developed
using hand lay-up and vacuum bagging technique. Impact and
flexural strength were investigated as a function of fibre type (coir
and kenaf) and reinforcement structure (imbalanced plain woven,
0°/90° cross-ply and +45°/-45° cross-ply). Multi-level full factorial
design of experiment (DOE) and analysis of variance (ANOVA) was
employed to impart data as to how fibre type and reinforcement
structure parameters affect the mechanical properties of the
composites. This systematic experimentation has led to determination
of significant factors that predominant influences the impact and
flexural properties of the textile composites. It was proven that both
fibre type and reinforcement structure demonstrated significant
difference results. Overall results indicated that coir composite and
woven structure exhibited better impact and flexural strength. Yet,
cross-ply composite structure demonstrated better fracture resistance.
Abstract: The image segmentation method described in this
paper has been developed as a pre-processing stage to be used in
methodologies and tools for video/image indexing and retrieval by
content. This method solves the problem of whole objects extraction
from background and it produces images of single complete objects
from videos or photos. The extracted images are used for calculating
the object visual features necessary for both indexing and retrieval
processes.
The segmentation algorithm is based on the cooperation among an
optical flow evaluation method, edge detection and region growing
procedures. The optical flow estimator belongs to the class of
differential methods. It permits to detect motions ranging from a
fraction of a pixel to a few pixels per frame, achieving good results in
presence of noise without the need of a filtering pre-processing stage
and includes a specialised model for moving object detection.
The first task of the presented method exploits the cues from
motion analysis for moving areas detection. Objects and background
are then refined using respectively edge detection and seeded region
growing procedures. All the tasks are iteratively performed until
objects and background are completely resolved.
The method has been applied to a variety of indoor and outdoor
scenes where objects of different type and shape are represented on
variously textured background.
Abstract: The occurrence and removal of trace organic
contaminants in the aquatic environment has become a focus of
environmental concern. For the selective removal of carbamazepine
from loaded waters molecularly imprinted polymers (MIPs) were
synthesized with carbamazepine as template. Parameters varied were
the type of monomer, crosslinker, and porogen, the ratio of starting
materials, and the synthesis temperature. Best results were obtained
with a template to crosslinker ratio of 1:20, toluene as porogen, and
methacrylic acid (MAA) as monomer. MIPs were then capable to
recover carbamazepine by 93% from a 10-5 M landfill leachate
solution containing also caffeine and salicylic acid. By comparison,
carbamazepine recoveries of 75% were achieved using a nonimprinted
polymer (NIP) synthesized under the same conditions, but
without template. In landfill leachate containing solutions
carbamazepine was adsorbed by 93-96% compared with an uptake of
73% by activated carbon. The best solvent for desorption was
acetonitrile, with which the amount of solvent necessary and dilution
with water was tested. Selected MIPs were tested for their reusability
and showed good results for at least five cycles. Adsorption
isotherms were prepared with carbamazepine solutions in the
concentration range of 0.01 M to 5*10-6 M. The heterogeneity index
showed a more homogenous binding site distribution.
Abstract: The paper explores the development of an optimization of method and apparatus for retrieving extended high dynamic range from digital negative image. Architectural photo imaging can benefit from high dynamic range imaging (HDRI) technique for preserving and presenting sufficient luminance in the shadow and highlight clipping image areas. The HDRI technique that requires multiple exposure images as the source of HDRI rendering may not be effective in terms of time efficiency during the acquisition process and post-processing stage, considering it has numerous potential imaging variables and technical limitations during the multiple exposure process. This paper explores an experimental method and apparatus that aims to expand the dynamic range from digital negative image in HDRI environment. The method and apparatus explored is based on a single source of RAW image acquisition for the use of HDRI post-processing. It will cater the optimization in order to avoid and minimize the conventional HDRI photographic errors caused by different physical conditions during the photographing process and the misalignment of multiple exposed image sequences. The study observes the characteristics and capabilities of RAW image format as digital negative used for the retrieval of extended high dynamic range process in HDRI environment.
Abstract: Ever since industrial revolution began, our ecosystem
has changed. And indeed, the negatives outweigh the positives.
Industrial waste usually released into all kinds of body of water, such
as river or sea. Tempeh waste is one example of waste that carries
many hazardous and unwanted substances that will affect the
surrounding environment. Tempeh is a popular fermented food in
Asia which is rich in nutrients and active substances. Tempeh liquid
waste- in particular- can cause an air pollution, and if penetrates
through the soil, it will contaminates ground-water, making it
unavailable for the water to be consumed. Moreover, bacteria will
thrive within the polluted water, which often responsible for causing
many kinds of diseases. The treatment used for this chemical waste is
biological treatment such as constructed wetland and activated
sludge. These kinds of treatment are able to reduce both physical and
chemical parameters altogether such as temperature, TSS, pH, BOD,
COD, NH3-N, NO3-N, and PO4-P. These treatments are implemented
before the waste is released into the water. The result is a
comparation between constructed wetland and activated sludge,
along with determining which method is better suited to reduce the
physical and chemical subtances of the waste.
Abstract: Two geometrically nonlinear plate theories, based either on first- or third-order transverse shear deformation theory are used for finite element modeling and simulation of the transient response of smart structures incorporating piezoelectric layers. In particular the time histories of nonlinear vibrations and sensor voltage output of a thin beam with a piezoelectric patch bonded to the surface due to an applied step force are studied.
Abstract: Program slicing is the task of finding all statements in
a program that directly or indirectly influence the value of a variable
occurrence. The set of statements that can affect the value of a
variable at some point in a program is called a program backward
slice. In several software engineering applications, such as program
debugging and measuring program cohesion and parallelism, several
slices are computed at different program points. The existing
algorithms for computing program slices are introduced to compute a
slice at a program point. In these algorithms, the program, or the
model that represents the program, is traversed completely or
partially once. To compute more than one slice, the same algorithm
is applied for every point of interest in the program. Thus, the same
program, or program representation, is traversed several times.
In this paper, an algorithm is introduced to compute all forward
static slices of a computer program by traversing the program
representation graph once. Therefore, the introduced algorithm is
useful for software engineering applications that require computing
program slices at different points of a program. The program
representation graph used in this paper is called Program Dependence
Graph (PDG).
Abstract: one of the significant factors for improving the
accuracy of Land Surface Temperature (LST) retrieval is the correct
understanding of the directional anisotropy for thermal radiance. In
this paper, the multiple scattering effect between heterogeneous
non-isothermal surfaces is described rigorously according to the
concept of configuration factor, based on which a directional thermal
radiance model is built, and the directional radiant character for urban
canopy is analyzed. The model is applied to a simple urban canopy
with row structure to simulate the change of Directional Brightness
Temperature (DBT). The results show that the DBT is aggrandized
because of the multiple scattering effects, whereas the change range of
DBT is smoothed. The temperature difference, spatial distribution,
emissivity of the components can all lead to the change of DBT. The
“hot spot" phenomenon occurs when the proportion of high
temperature component in the vision field came to a head. On the other
hand, the “cool spot" phenomena occur when low temperature
proportion came to the head. The “spot" effect disappears only when
the proportion of every component keeps invariability. The model
built in this paper can be used for the study of directional effect on
emissivity, the LST retrieval over urban areas and the adjacency effect
of thermal remote sensing pixels.
Abstract: Problem-based learning (PBL) is one of the student
centered approaches and has been considered by a number of higher
educational institutions in many parts of the world as a method of
delivery. This paper presents a creative thinking approach for
implementing Problem-based Learning in Mechanics of Structure
within a Malaysian Polytechnics environment. In the learning
process, students learn how to analyze the problem given among the
students and sharing classroom knowledge into practice. Further,
through this course-s emphasis on problem-based learning, students
acquire creative thinking skills and professional skills as they tackle
complex, interdisciplinary and real-situation problems. Once the
creative ideas are generated, there are useful additional techniques
for tender ideas that will grow into a productive concept or solution.
The combination of creative skills and technical abilities will enable
the students to be ready to “hit-the-ground-running" and produce in
industry when they graduate.
Abstract: Three-dimensional geometric models have been used
to present architectural and engineering works, showing their final
configuration. When the clarification of a detail or the constitution of
a construction step in needed, these models are not appropriate. They
do not allow the observation of the construction progress of a
building. Models that could present dynamically changes of the
building geometry are a good support to the elaboration of projects.
Techniques of geometric modeling and virtual reality were used to
obtain models that could visually simulate the construction activity.
The applications explain the construction work of a cavity wall and a
bridge. These models allow the visualization of the physical
progression of the work following a planned construction sequence,
the observation of details of the form of every component of the
works and support the study of the type and method of operation of
the equipment applied in the construction. These models presented
distinct advantage as educational aids in first-degree courses in Civil
Engineering. The use of Virtual Reality techniques in the
development of educational applications brings new perspectives to
the teaching of subjects related to the field of civil construction.
Abstract: Here we have considered non uniform microstrip
leaky-wave antenna implemented on a dielectric waveguide by a
sinusoidal profile of periodic metallic grating. The non distribution of
the attenuation constant α along propagation axis, optimize the
radiating characteristics and performances of such antennas. The
method developped here is based on an integral method where the
formalism of the admittance operator is combined to a BKW
approximation. First, the effect of the modeling in the modal analysis
of complex waves is studied in detail. Then, the BKW model is used
for the dispersion analysis of the antenna of interest. According to
antenna theory, a forced continuity of the leaky-wave magnitude at
discontinuities of the non uniform structure is established. To test the
validity of our dispersion analysis, computed radiation patterns are
presented and compared in the millimeter band.
Abstract: This paper deals with modeling and parameter
identification of nonlinear systems described by Hammerstein model
having Piecewise nonlinear characteristics such as Dead-zone
nonlinearity characteristic. The simultaneous use of both an easy
decomposition technique and the triangular basis functions leads to a
particular form of Hammerstein model. The approximation by using
Triangular basis functions for the description of the static nonlinear
block conducts to a linear regressor model, so that least squares
techniques can be used for the parameter estimation. Singular Values
Decomposition (SVD) technique has been applied to separate the
coupled parameters. The proposed approach has been efficiently
tested on academic examples of simulation.
Abstract: The Romanian government has been making
significant attempts to make its services and information available on
the Internet. According to the UN e-government survey conducted in
2008, Romania comes under mid range countries by utilization of egovernment
(percent of utilization 41%). Romania-s national portal
www.e-guvernare.ro aims at progressively making all services and
information accessible through the portal. However, the success of
these efforts depends, to a great extent, on how well the targeted
users for such services, citizens in general, make use of them. For
this reason, the purpose of the presented study was to identify what
factors could affect the citizens' adoption of e-government services.
The study is an extension of the Technology Acceptance Model. The
proposed model was validated using data collected from 481 citizens.
The results provided substantial support for all proposed hypotheses
and showed the significance of the extended constructs.
Abstract: In this study, we developed an algorithm for detecting
seam cracks in a steel plate. Seam cracks are generated in the edge
region of a steel plate. We used the Gabor filter and an adaptive double
threshold method to detect them. To reduce the number of pseudo
defects, features based on the shape of seam cracks were used. To
evaluate the performance of the proposed algorithm, we tested 989
images with seam cracks and 9470 defect-free images. Experimental
results show that the proposed algorithm is suitable for detecting seam
cracks. However, it should be improved to increase the true positive
rate.
Abstract: In this paper we will develop a sequential life test approach applied to a modified low alloy-high strength steel part used in highway overpasses in Brazil.We will consider two possible underlying sampling distributions: the Normal and theInverse Weibull models. The minimum life will be considered equal to zero. We will use the two underlying models to analyze a fatigue life test situation, comparing the results obtained from both.Since a major chemical component of this low alloy-high strength steel part has been changed, there is little information available about the possible values that the parameters of the corresponding Normal and Inverse Weibull underlying sampling distributions could have. To estimate the shape and the scale parameters of these two sampling models we will use a maximum likelihood approach for censored failure data. We will also develop a truncation mechanism for the Inverse Weibull and Normal models. We will provide rules to truncate a sequential life testing situation making one of the two possible decisions at the moment of truncation; that is, accept or reject the null hypothesis H0. An example will develop the proposed truncated sequential life testing approach for the Inverse Weibull and Normal models.
Abstract: Over the years, there is a growing trend towards
quality-based specifications in highway construction. In many
Quality Control/Quality Assurance (QC/QA) specifications, the
contractor is primarily responsible for quality control of the process,
whereas the highway agency is responsible for testing the acceptance
of the product. A cooperative investigation was conducted in Illinois
over several years to develop a prototype End-Result Specification
(ERS) for asphalt pavement construction. The final characteristics of
the product are stipulated in the ERS and the contractor is given
considerable freedom in achieving those characteristics. The risk for
the contractor or agency depends on how the acceptance limits and
processes are specified. Stochastic simulation models are very useful
in estimating and analyzing payment risk in ERS systems and these
form an integral part of the Illinois-s prototype ERS system. This
paper describes the development of an innovative methodology to
estimate the variability components in in-situ density, air voids and
asphalt content data from ERS projects. The information gained from
this would be crucial in simulating these ERS projects for estimation
and analysis of payment risks associated with asphalt pavement
construction. However, these methods require at least two parties to
conduct tests on all the split samples obtained according to the
sampling scheme prescribed in present ERS implemented in Illinois.
Abstract: A key element of many distribution systems is the
routing and scheduling of vehicles servicing a set of customers. A
wide variety of exact and approximate algorithms have been
proposed for solving the vehicle routing problems (VRP). Exact
algorithms can only solve relatively small problems of VRP, which is
classified as NP-Hard. Several approximate algorithms have proven
successful in finding a feasible solution not necessarily optimum.
Although different parts of the problem are stochastic in nature; yet,
limited work relevant to the application of discrete event system
simulation has addressed the problem. Presented here is optimization
using simulation of VRP; where, a simplified problem has been
developed in the ExtendSimTM simulation environment; where,
ExtendSimTM evolutionary optimizer is used to minimize the total
transportation cost of the problem. Results obtained from the model
are very satisfactory. Further complexities of the problem are
proposed for consideration in the future.