Abstract: Tomato powder has good potential as substitute of tomato paste and other tomato products. In order to protect physicochemical properties and nutritional quality of tomato during dehydration process, investigation was carried out using different drying methods and pretreatments. Solar drier and continuous conveyor (tunnel) drier were used for dehydration where as calcium chloride (CaCl2), potassium metabisulphite (KMS), calcium chloride and potassium metabisulphite (CaCl2 +KMS), and sodium chloride (NaCl) selected for treatment.. lycopene content, dehydration ratio, rehydration ratio and non-enzymatic browning in addition to moisture, sugar and titrable acidity were studied. Results show that pre-treatment with CaCl2 and NaCl increased water removal and moisture mobility in tomato slices during drying of tomatoes. Where CaCl2 used along with KMS the NEB was recorded the least compared to other treatments and the best results were obtained while using the two chemicals in combination form. Storage studies in LDPE polymeric and metalized polyesters films showed less changes in the products packed in metallized polyester pouches and even after 6 months lycopene content did not decrease more than 20% as compared to the control sample and provide extension of shelf life in acceptable condition for 6 months. In most of the quality characteristics tunnel drier samples presented better values in comparison to solar drier.
Abstract: The evolution of silica optical fiber strength aged in cetyltrimethylammonium chloride solution (CTAC) has been investigated. If the solution containing surfactants presents appreciable changes in physical and chemical properties at the critical micelle concentration (CMC), a non negligible mechanical behavior fiber change is observed for silica fiber aged in cationic surfactants as CTAC which can lead to optical fiber reliability questioning. The purpose of this work is to study the mechanical behavior of silica coated and naked optical fibers in contact with CTAC solution at different concentrations. Result analysis proves that the immersion in CTAC drastically decreases the fiber strength and specially near the CMC point. Beyond CMC point, a small increase of fiber strength is analyzed and commented.
Abstract: The contact width is important design parameter for
optimizing the design of new metal gasket for asbestos substitution
gasket. The contact width is found have relationship with the helium
leak quantity. In the increasing of axial load value, the helium leak
quantity is decreasing and the contact width is increasing. This study
provides validity method using simulation analysis and the result is
compared to experimental using pressure sensitive paper. The results
denote similar trend data between simulation and experimental result.
Final evaluation is determined by helium leak quantity to check
leakage performance of gasket design. Considering the phenomena of
position change on the convex contact, it can be developed the
optimization of gasket design by increasing contact width.
Abstract: Organ motion, especially respiratory motion, is a technical challenge to radiation therapy planning and dosimetry. This motion induces displacements and deformation of the organ tissues within the irradiated region which need to be taken into account when simulating dose distribution during treatment. Finite element modeling (FEM) can provide a great insight into the mechanical behavior of the organs, since they are based on the biomechanical material properties, complex geometry of organs, and anatomical boundary conditions. In this paper we present an original approach that offers the possibility to combine image-based biomechanical models with particle transport simulations. We propose a new method to map material density information issued from CT images to deformable tetrahedral meshes. Based on the principle of mass conservation our method can correlate density variation of organ tissues with geometrical deformations during the different phases of the respiratory cycle. The first results are particularly encouraging, as local error quantification of density mapping on organ geometry and density variation with organ motion are performed to evaluate and validate our approach.
Abstract: We propose our genuine research of geometric
moments which detects the mineral inadequacy in the frail groundnut
plant. This plant is prone to many deficiencies as a result of the
variance in the soil nutrients. By analyzing the leaves of the plant, we
detect the visual symptoms that are not recognizable to the naked eyes.
We have collected about 160 samples of leaves from the nearby fields.
The images have been taken by keeping every leaf into a black box to
avoid the external interference. For the first time, it has been possible
to provide the farmer with the stages of deficiencies. This paper has
applied the algorithms successfully to many other plants like Lady-s
finger, Green Bean, Lablab Bean, Chilli and Tomato. But we submit
the results of the groundnut predominantly. The accuracy of our
algorithm and method is almost 93%. This will again pioneer a kind of
green revolution in the field of agriculture and will be a boon to that
field.
Abstract: This work deals with aspects of support vector machine learning for large-scale data mining tasks. Based on a decomposition algorithm for support vector machine training that can be run in serial as well as shared memory parallel mode we introduce a transformation of the training data that allows for the usage of an expensive generalized kernel without additional costs. We present experiments for the Gaussian kernel, but usage of other kernel functions is possible, too. In order to further speed up the decomposition algorithm we analyze the critical problem of working set selection for large training data sets. In addition, we analyze the influence of the working set sizes onto the scalability of the parallel decomposition scheme. Our tests and conclusions led to several modifications of the algorithm and the improvement of overall support vector machine learning performance. Our method allows for using extensive parameter search methods to optimize classification accuracy.
Abstract: Magetan area is going to be the object of this research
which is located in East Java, Indonesia. The data were obtained
from 270 civil servants working at the Magetan District government.
The data were analyzed using the Structural Equation Modeling with
Partial Least Square program. The research showed the following
findings: (1) job motivation variable has a positive and significant
effect on organizational citizenship behavior (OCB); (2) work
environment has positive and significant effect on OCB; (3)
leadership variable has positive and significant effect on OCB; (4)
job motivation variable has no significant effect on job satisfaction;
(5) work environment variable has no significant effect on job
satisfaction; (6) leadership variable has no significant effect on job
satisfaction; (7) OCB is positively and significantly associated with
job satisfaction; (8) job satisfaction variable is positively and
significantly correlated with quality of public service at the Magetan
District government.
Abstract: The aim of this study was to examine current levels of physical activity determined via heart rate monitoring. A total of 176 children (85 boys, 91 girls) aged 5-13 years wore sealed Polar heart rate monitors for at least 10 hours per day on at least 3 days. Mean daily minutes of moderate to vigorous-intensity physical activity was 65 ± 43 (mean ± SD) for boys and 54 ± 37 for girls. Daily minutes of vigorous-intensity activity was 31 ± 24 and 24 ± 21 for boys and girls respectively. Significant differences in physical activity levels were observed between school day and weekends, boys and girls, and among age and geographical groups. Only 36% of boys and 22% of girls met the New Zealand physical activity guideline. This research indicates that a large proportion of New Zealand children are not meeting physical activity recommendations.
Abstract: This essay endeavors to read Ama Ata Aidoo-s Our Sister Killjoy with a postocolonially-inflected consciousness. It aims at demonstrating how her work could be read as a sophisticated postcolonial revision of the colonial travel narrative whereby the protagonist-s black-eyed squint operates as 'the all-seeing-eye' to subvert the historically unbroken legacy of the Orientalist ideology. It tries to demonstrate how Sissie assumes authority and voice in an act that destabilizes the traditionally established modes of western representation. It is also an investigation into how Aidoo-s text adopts processes which disengage the Eurocentric view produced by the discursive itineraries of western institutions through diverse acts of resistance and 'various strategies of subversion and appropriation'. Her counter discursive strategies of resistance are shaped up in various ways by a feminist consciousness that attempts to articulate a distinct African version of identity and preserve cultural distinctiveness.
Abstract: We analyze the problem of decision making under
ignorance with regrets. Recently, Yager has developed a new method
for decision making where instead of using regrets he uses another
type of transformation called negrets. Basically, the negret is
considered as the dual of the regret. We study this problem in detail
and we suggest the use of geometric aggregation operators in this
method. For doing this, we develop a different method for
constructing the negret matrix where all the values are positive. The
main result obtained is that now the model is able to deal with
negative numbers because of the transformation done in the negret
matrix. We further extent these results to another model developed
also by Yager about mixing valuations and negrets. Unfortunately, in
this case we are not able to deal with negative numbers because the
valuations can be either positive or negative.
Abstract: Since dealing with high dimensional data is
computationally complex and sometimes even intractable, recently
several feature reductions methods have been developed to reduce
the dimensionality of the data in order to simplify the calculation
analysis in various applications such as text categorization, signal
processing, image retrieval, gene expressions and etc. Among feature
reduction techniques, feature selection is one the most popular
methods due to the preservation of the original features.
In this paper, we propose a new unsupervised feature selection
method which will remove redundant features from the original
feature space by the use of probability density functions of various
features. To show the effectiveness of the proposed method, popular
feature selection methods have been implemented and compared.
Experimental results on the several datasets derived from UCI
repository database, illustrate the effectiveness of our proposed
methods in comparison with the other compared methods in terms of
both classification accuracy and the number of selected features.
Abstract: This paper objects to extend Jon Kleinberg-s research. He introduced the structure of small-world in a grid and shows with a greedy algorithm using only local information able to find route between source and target in delivery time O(log2n). His fundamental model for distributed system uses a two-dimensional grid with longrange random links added between any two node u and v with a probability proportional to distance d(u,v)-2. We propose with an additional information of the long link nearby, we can find the shorter path. We apply the ant colony system as a messenger distributed their pheromone, the long-link details, in surrounding area. The subsequence forwarding decision has more option to move to, select among local neighbors or send to node has long link closer to its target. Our experiment results sustain our approach, the average routing time by Color Pheromone faster than greedy method.
Abstract: In this paper we propose new method for
simultaneous generating multiple quantiles corresponding to given
probability levels from data streams and massive data sets. This
method provides a basis for development of single-pass low-storage
quantile estimation algorithms, which differ in complexity, storage
requirement and accuracy. We demonstrate that such algorithms may
perform well even for heavy-tailed data.
Abstract: Wimax (Worldwide Interoperability for Microwave Access)
is a promising technology which can offer high speed data,
voice and video service to the customer end, which is presently, dominated
by the cable and digital subscriber line (DSL) technologies.
The performance assessment of Wimax systems is dealt with. The
biggest advantage of Broadband wireless application (BWA) over its
wired competitors is its increased capacity and ease of deployment.
The aims of this paper are to model and simulate the fixed OFDM
IEEE 802.16d physical layer under variant combinations of digital
modulation (BPSK, QPSK, and 16-QAM) over diverse combination
of fading channels (AWGN, SUIs). Stanford University Interim (SUI)
Channel serial was proposed to simulate the fixed broadband wireless
access channel environments where IEEE 802.16d is to be deployed.
It has six channel models that are grouped into three categories
according to three typical different outdoor Terrains, in order to give
a comprehensive effect of fading channels on the overall performance
of the system.
Abstract: The Bulgarian natural expanded mineral obtained from Bentonite AD perlite (A deposit of "The Broken Mountain" for perlite mining, near by the village of Vodenicharsko, in the municipality of Djebel), was loaded with silver (as ion form - Ag+ 2 and 5 wt% by the incipient wetness impregnation method), and as atomic silver - Ag0 using Tollen-s reagent (silver mirror reaction). Some physicochemical characterization of the samples are provided via: DC arc-AES, XRD, DR-IR and UV-VIS. The aim of this work was to obtain and test the silver-loaded catalyst for ozone decomposition. So the samples loaded with atomic silver show ca. 80% conversion of ozone 20 minutes after the reaction start. Then conversion decreases to ca. 20 % but stay stable during the prolongation of time.
Abstract: A product development for green logistics model using
the fuzzy analytic network process method is presented for evaluating
the relationships among the product design, the manufacturing
activities, and the green supply chain. In the product development
stage, there can be alternative ways to design the detailed components
to satisfy the design concept and product requirement. In different
design alternative cases, the manufacturing activities can be different.
In addition, the manufacturing activities can affect the green supply
chain of the components and product. In this research, a fuzzy analytic
network process evaluation model is presented for evaluating the
criteria in product design, manufacturing activities, and green supply
chain. The comparison matrices for evaluating the criteria among the
three groups are established. The total relational values between the
three groups represent the relationships and effects. In application, the
total relational values can be used to evaluate the design alternative
cases for decision-making to select a suitable design case and the green
supply chain. In this presentation, an example product is illustrated. It
shows that the model is useful for integrated evaluation of design and
manufacturing and green supply chain for the purpose of product
development for green logistics.
Abstract: As far as the latest technological improvements are concerned, digital systems more become popular than the past. Despite this growing demand to the digital systems, content copy and attack against the digital cinema contents becomes a serious problem. To solve the above security problem, we propose “traceable watermarking using Hash functions for digital cinema system. Digital Cinema is a great application for traceable watermarking since it uses watermarking technology during content play as well as content transmission. The watermark is embedded into the randomly selected movie frames using CRC-32 techniques. CRC-32 is a Hash function. Using it, the embedding position is distributed by Hash Function so that any party cannot break off the watermarking or will not be able to change. Finally, our experimental results show that proposed DWT watermarking method using CRC-32 is much better than the convenient watermarking techniques in terms of robustness, image quality and its simple but unbreakable algorithm.
Abstract: Regular physical activity contributes positively to physiological and psychological health. This study aimed to identify exercise behavior changes, self efficacy and decisional balance in nursing and midwifery students. This was a cross-sectional study carried out in Iran.300undergraduate nursing and midwifery students participated in this study. Data were collected using a questionnaire including demographic information, exercise stages of change, exercise self efficacy and pros and cons exercise decisional balance. The analysis was performed using the SPSS.A p-value of less than 0.05 was considered as statistically significant.
Abstract: This paper proposes a novel methodology for enabling
debugging and tracing of production web applications without
affecting its normal flow and functionality. This method of debugging
enables developers and maintenance engineers to replace a set of
existing resources such as images, server side scripts, cascading
style sheets with another set of resources per web session. The new
resources will only be active in the debug session and other sessions
will not be affected. This methodology will help developers in tracing
defects, especially those that appear only in production environments
and in exploring the behaviour of the system. A realization of the
proposed methodology has been implemented in Java.
Abstract: The purpose of this study is to design a portable virtual
piano. By utilizing optical fiber gloves and the virtual piano software
designed by this study, the user can play the piano anywhere at any
time. This virtual piano consists of three major parts: finger tapping
identification, hand movement and positioning identification, and
MIDI software sound effect simulation. To play the virtual piano, the
user wears optical fiber gloves and simulates piano key tapping
motions. The finger bending information detected by the optical fiber
gloves can tell when piano key tapping motions are made. Images
captured by a video camera are analyzed, hand locations and moving
directions are positioned, and the corresponding scales are found. The
system integrates finger tapping identification with information about
hand placement in relation to corresponding piano key positions, and
generates MIDI piano sound effects based on this data. This
experiment shows that the proposed method achieves an accuracy rate
of 95% for determining when a piano key is tapped.