Abstract: In response to address different development challenges, Tanzania is striving to achieve its fourth attribute of the National Development Vision, i.e. to have a well educated and learned society by the year 2025. One of the most cost effective methods that can reach a large part of the society in a short time is to integrate ICT in education through e-learning initiatives. However, elearning initiatives are challenged by limited or lack of connectivity to majority of secondary schools, especially those in rural and remote areas. This paper has explores the possibility for rural secondary school to access online e-Learning resources from a centralized e- Learning Management System (e-LMS). The scope of this paper is limited to schools that have computers irrespective of internet connectivity, resulting in two categories schools; those with internet access and those without. Different connectivity configurations have been proposed according to the ICT infrastructure status of the respective schools. However, majority of rural secondary schools in Tanzania have neither computers nor internet connection. Therefore this is a challenge to be addressed for the disadvantaged schools to benefit from e-Learning initiatives.
Abstract: The purpose of this research was develop a biological
nutrient removal (BNR) system which has low energy consumption, sludge production, and land usage. These indicate that BNR system could be a alternative of future wastewater treatment in ubiquitous
city(U-city). Organics and nitrogen compounds could be removed by this system so that secondary or tertiary stages of wastewater treatment satisfy their standards. This system was composed of oxic and anoxic
filter filed with PVDC and POM media. Anoxic/oxic filter system operated under empty bed contact time of 4 hours by increasing
recirculation ratio from 0 to 100 %. The system removals of total nitrogen and COD were 76.3% and 93%, respectively. To be observed
internal behavior in this system SCOD, NH3-N, and NO3-N were
conducted and removal shows range of 25~100%, 59~99%, and
70~100%, respectively.
Abstract: Web applications have become very complex and
crucial, especially when combined with areas such as CRM
(Customer Relationship Management) and BPR (Business Process
Reengineering), the scientific community has focused attention to
Web applications design, development, analysis, and testing, by
studying and proposing methodologies and tools. This paper
proposes an approach to automatic multi-dimensional concern
mining for Web Applications, based on concepts analysis, impact
analysis, and token-based concern identification. This approach lets
the user to analyse and traverse Web software relevant to a particular
concern (concept, goal, purpose, etc.) via multi-dimensional
separation of concerns, to document, understand and test Web
applications. This technique was developed in the context of WAAT
(Web Applications Analysis and Testing) project. A semi-automatic
tool to support this technique is currently under development.
Abstract: Mammographic images and data analysis to
facilitate modelling or computer aided diagnostic (CAD) software development should best be done using a common database that can handle various mammographic image file
formats and relate these to other patient information.
This would optimize the use of the data as both primary
reporting and enhanced information extraction of research data could be performed from the single dataset. One desired
improvement is the integration of DICOM file header information into the database, as an efficient and reliable source of supplementary patient information intrinsically
available in the images.
The purpose of this paper was to design a suitable database to link and integrate different types of image files and gather common information that can be further used for research
purposes. An interface was developed for accessing, adding,
updating, modifying and extracting data from the common
database, enhancing the future possible application of the data in CAD processing.
Technically, future developments envisaged include the creation of an advanced search function to selects image files
based on descriptor combinations. Results can be further used for specific CAD processing and other research. Design of a
user friendly configuration utility for importing of the required fields from the DICOM files must be done.
Abstract: Canola is a specific edible type of rapeseed, developed
in the 1970s, which contains about 40 percent oil. This research was
carried out to determine the yield and some quality characteristics of
some winter canola cultivars during the 2010-2011 vegetation period
in Central Anatolia of Turkey. In this research; Oase, Dante,
Californium, Excalibur, Elvis, ES Hydromel, Licord, Orkan, Vectra,
Nelson, Champlain and NK Petrol winter canola varieties were used
as material. The field experiment was set up in a “Randomized
Complete Block Design” with three replications on 21 September
2010. In this research; seed yield, oil content, protein content, oil
yield and protein yield were examined.
As a result of this research; seed yield, oil content, oil yield and
protein yield (except protein content) were significant differences
between the cultivars. The highest seed yield (6348 kg ha-1) was
obtained from the NK Petrol, while the lowest seed yield (3949 kg
ha-1) was determined from the Champlain cultivar was obtained. The
highest oil content (46.73%) was observed from Oase and the lowest
value was obtained from Vectra (41.87%) cultivar. The highest oil
yield (2950 kg ha-1) was determined from NK Petrol while the least
value (1681 kg ha-1) was determined from Champlain cultivar. The
highest protein yield (1539.3 kg ha-1) was obtained from NK Petrol
and the lowest protein yield (976.5 kg ha-1) was obtained from
Champlain cultivar.
The main purpose of the cultivation of oil crops, to increase the
yield of oil per unit area. According the result of this research, NK
Petrol cultivar which ranks first with regard to both seed yield and oil
yield between cultivars as the most suitable winter canola cultivar of
local conditions.
Abstract: Induction machine models used for steady-state and
transient analysis require machine parameters that are usually
considered design parameters or data. The knowledge of induction
machine parameters is very important for Indirect Field Oriented
Control (IFOC). A mismatched set of parameters will degrade the
response of speed and torque control. This paper presents an
improvement approach on rotor time constant adaptation in IFOC for
Induction Machines (IM). Our approach tends to improve the
estimation accuracy of the fundamental model for flux estimation.
Based on the reduced order of the IM model, the rotor fluxes and
rotor time constant are estimated using only the stator currents and
voltages. This reduced order model offers many advantages for real
time identification parameters of the IM.
Abstract: Based on the classical algorithm LSQR for solving (unconstrained) LS problem, an iterative method is proposed for the least-squares like-minimum-norm symmetric solution of AXB+CYD=E. As the application of this algorithm, an iterative method for the least-squares like-minimum-norm biymmetric solution of AXB=E is also obtained. Numerical results are reported that show the efficiency of the proposed methods.
Abstract: This paper proposes the requirements and design of
RFID based system for SFC (Shop Floor Control) in order to achieve
the factory real time controllability, Allowing to develop EManufacturing
System. The detailed logical specifications of the core
functions and the design diagrams of RFID based system are
developed. Then RFID deployment in E-Manufacturing systems is
investigated..
Abstract: The Virtual Reality (VR) is becoming increasingly
important for business, education, and entertainment, therefore VR
technology have been applied for training purposes in the areas of
military, safety training and flying simulators. In particular, the
superior and high reliability VR training system is very important in
immersion. Manipulation training in immersive virtual environments
is difficult partly because users must do without the hap contact with
real objects they rely on in the real world to orient themselves and
their manipulated.
In this paper, we create a convincing questionnaire of immersion
and an experiment to assess the influence of immersion on
performance in VR training system. The Immersion Questionnaire
(IQ) included spatial immersion, Psychological immersion, and
Sensory immersion. We show that users with a training system
complete visual attention and detection of signals. Twenty subjects
were allocated to a factorial design consisting of two different VR
systems (Desktop VR and Projector VR). The results indicated that
different VR representation methods significantly affected the
participants- Immersion dimensions.
Abstract: This paper intends to identify the ethnic Kazakhstani
Koreans- political process of identity formation by exploring their
narrative and practice about the state language represented in the
course of their becoming the new citizens of a new independent state.
The Russophone Kazakhstani Koreans- inability to speak the official
language of their affiliated state is considered there as dissatisfying the
basic requirement of citizens of the independent state, so that they are
becoming marginalized from the public sphere. Their contradictory
attitude that at once demonstrates nominal reception and practical
rejection of the obligatory state language unveils a high barrier inside
between their self-language and other-language. In this paper, the
ethnic Korean group-s conflicting linguistic identity is not seen as a
free and simple choice, but as a dynamic struggle and political process
in which the subject-s past experiences and memories intersect with
the external elements of pressure.
Abstract: This study has investigated a vehicle Lumped
Parameter Model (LPM) in frontal crash. There are several ways for
determining spring and damper characteristics and type of problem
shall be considered as system identification. This study use Genetic
Algorithm (GA) procedure, being an effective procedure in case of
optimization issues, for optimizing errors, between target data
(experimental data) and calculated results (being obtained by
analytical solving). In this study analyzed model in 5-DOF then
compared our results with 5-DOF serial model. Finally, the response
of model due to external excitement is investigated.
Abstract: The response of growth and yield of rainfed-chickpea
to population density should be evaluated based on long-term
experiments to include the climate variability. This is achievable just
by simulation. In this simulation study, this evaluation was done by
running the CYRUS model for long-term daily weather data of five
locations in Iran. The tested population densities were 7 to 59 (with
interval of 2) stands per square meter. Various functions, including
quadratic, segmented, beta, broken linear, and dent-like functions,
were tested. Considering root mean square of deviations and linear
regression statistics [intercept (a), slope (b), and correlation
coefficient (r)] for predicted versus observed variables, the quadratic
and broken linear functions appeared to be appropriate for describing
the changes in biomass and grain yield, and in harvest index,
respectively. Results indicated that in all locations, grain yield tends
to show increasing trend with crowding the population, but
subsequently decreases. This was also true for biomass in five
locations. The harvest index appeared to have plateau state across
low population densities, but decreasing trend with more increasing
density. The turning point (optimum population density) for grain
yield was 30.68 stands per square meter in Isfahan, 30.54 in Shiraz,
31.47 in Kermanshah, 34.85 in Tabriz, and 32.00 in Mashhad. The
optimum population density for biomass ranged from 24.6 (in
Tabriz) to 35.3 stands per square meter (Mashhad). For harvest index
it varied between 35.87 and 40.12 stands per square meter.
Abstract: The International Classification of Primary Care (ICPC), which belongs to the WHO Family of International Classifications (WHO-FIC), has a low granularity, which is convenient for describing general medical practice. However, its lack of specificity makes it useful to be used along with an interface terminology. An international survey has been performed, using a questionnaire sent by email to experts from 25 countries, in order to describe the terminologies interfacing with ICPC. Eleven interface terminologies have been identified, developed in Argentina, Australia, Belgium (2), Canada, Denmark, France, Germany, Norway, South Africa, and The Netherlands. Globally, these systems have been poorly assessed until now.
Abstract: One of the determinants of a firm-s prosperity is the
customers- perceived service quality and satisfaction. While service
quality is wide in scope, and consists of various dimensions, there
may be differences in the relative importance of these dimensions in
affecting customers- overall satisfaction of service quality.
Identifying the relative rank of different dimensions of service quality
is very important in that it can help managers to find out which
service dimensions have a greater effect on customers- overall
satisfaction. Such an insight will consequently lead to more effective
resource allocation which will finally end in higher levels of
customer satisfaction. This issue – despite its criticality- has not
received enough attention so far. Therefore, using a sample of 240
bank customers in Iran, an artificial neural network is developed to
address this gap in the literature. As customers- evaluation of service
quality is a subjective process, artificial neural networks –as a brain
metaphor- may appear to have a potentiality to model such a
complicated process. Proposing a neural network which is able to
predict the customers- overall satisfaction of service quality with a
promising level of accuracy is the first contribution of this study. In
addition, prioritizing the service quality dimensions in affecting
customers- overall satisfaction –by using sensitivity analysis of
neural network- is the second important finding of this paper.
Abstract: In the current economy of increasing global
competition, many organizations are attempting to use knowledge as
one of the means to gain sustainable competitive advantage. Besides
large organizations, the success of SMEs can be linked to how well
they manage their knowledge. Despite the profusion of research
about knowledge management within large organizations, fewer
studies tried to analyze KM in SMEs.
This research proposes a new framework showing the determinant
role of organizational dimensions onto KM approaches. The paper
and its propositions are based on a literature review and analysis.
In this research, personalization versus codification,
individualization versus institutionalization and IT-based versus non
IT-based are highlighted as three distinct dimensions of knowledge
management approaches.
The study contributes to research by providing a more nuanced
classification of KM approaches and provides guidance to managers
about the types of KM approaches that should be adopted based on
the size, geographical dispersion and task nature of SMEs.
To the author-s knowledge, the paper is the first of its kind to
examine if there are suitable configurations of KM approaches for
SMEs with different dimensions. It gives valuable information, which
hopefully will help SME sector to accomplish KM.
Abstract: An autonomous environmental monitoring system
(Smart Landfill) has been constructed for the quantitative
measurement of the components of landfill gas found at borehole
wells at the perimeter of landfill sites. The main components of
landfill gas are the greenhouse gases, methane and carbon dioxide
and have been monitored in the range 0-5 % volume. This monitoring
system has not only been tested in the laboratory but has been
deployed in multiple field trials and the data collected successfully
compared with on-site monitors. This success shows the potential of
this system for application in environments where reliable gas
monitoring is crucial.
Abstract: Amazing development of the information technology,
communications and internet expansion as well as the requirements
of the city managers to new ideas to run the city and higher
participation of the citizens encourage us to complete the electronic
city as soon as possible. The foundations of this electronic city are in
information technology. People-s participation in metropolitan
management is a crucial topic. Information technology does not
impede this matter. It can ameliorate populace-s participation and
better interactions between the citizens and the city managers.
Citizens can proffer their ideas, beliefs and votes through digital
mass media based upon the internet and computerization plexuses on
the topical matters to receive appropriate replies and services. They
can participate in urban projects by becoming cognizant of the city
views. The most significant challenges are as follows: information
and communicative management, altering citizens- views, as well as
legal and office documents
Electronic city obstacles have been identified in this research. The
required data were forgathered through questionnaires to identify the
barriers from a statistical community comprising specialists and
practitioners of the ministry of information technology and
communication, the municipality information technology
organization.
The conclusions demonstrate that the prioritized electronic city
application barriers in Iran are as follows:
The support quandaries (non-financial ones), behavioral, cultural
and educational plights, the security, legal and license predicaments,
the hardware, orismological and infrastructural curbs, the software
and fiscal problems.
Abstract: This article proposes a new methodology to be used by SMEs (Small and Medium enterprises) to characterize their performance in quality, highlighting weaknesses and area for improvement. The methodology aims to identify the principal causes of quality problems and help to prioritize improvement initiatives. This is a self-assessment methodology that intends to be easy to implement by companies with low maturity level in quality. The methodology is organized in six different steps which includes gathering information about predetermined processes and subprocesses of quality management, defined based on the well-known Juran-s trilogy for quality management (Quality planning, quality control and quality improvement) and, predetermined results categories, defined based on quality concept. A set of tools for data collecting and analysis, such as interviews, flowcharts, process analysis diagrams and Failure Mode and effects Analysis (FMEA) are used. The article also presents the conclusions obtained in the application of the methodology in two cases studies.
Abstract: Since the pioneering work of Zadeh, fuzzy set theory has been applied to a myriad of areas. Song and Chissom introduced the concept of fuzzy time series and applied some methods to the enrollments of the University of Alabama. In recent years, a number of techniques have been proposed for forecasting based on fuzzy set theory methods. These methods have either used enrollment numbers or differences of enrollments as the universe of discourse. We propose using the year to year percentage change as the universe of discourse. In this communication, the approach of Jilani, Burney, and Ardil is modified by using the year to year percentage change as the universe of discourse. We use enrollment figures for the University of Alabama to illustrate our proposed method. The proposed method results in better forecasting accuracy than existing models.
Abstract: Austenite and Martensite indicate the phases of solids undergoing phase transformation which we usually associate with materials and not with living organisms. This article provides an overview of bacterial proteins and structures that are undergoing phase transformation and suggests its probable effect on mechanical behavior. The context is mainly within the role of phase transformations occurring in the flagellum of bacteria. The current knowledge of molecular mechanism leading to phase variation in living organisms is reviewed. Since in bacteria, each flagellum is driven by a separate motor, similarity to a Differential drive in case of four-wheeled vehicles is suggested. It also suggests the application of the mechanism in which bacteria changes its direction of movement to facilitate single point turning of a multi-wheeled vehicle. Finally, examples are presented to illustrate that the motion due to phase transformation of flagella in bacteria can start a whole new research on motion mechanisms.