Abstract: For a spatiotemporal database management system,
I/O cost of queries and other operations is an important performance
criterion. In order to optimize this cost, an intense research on
designing robust index structures has been done in the past decade.
With these major considerations, there are still other design issues
that deserve addressing due to their direct impact on the I/O cost.
Having said this, an efficient buffer management strategy plays a key
role on reducing redundant disk access. In this paper, we proposed an
efficient buffer strategy for a spatiotemporal database index
structure, specifically indexing objects moving over a network of
roads. The proposed strategy, namely MONPAR, is based on the data
type (i.e. spatiotemporal data) and the structure of the index
structure. For the purpose of an experimental evaluation, we set up a
simulation environment that counts the number of disk accesses
while executing a number of spatiotemporal range-queries over the
index. We reiterated simulations with query sets with different
distributions, such as uniform query distribution and skewed query
distribution. Based on the comparison of our strategy with wellknown
page-replacement techniques, like LRU-based and Prioritybased
buffers, we conclude that MONPAR behaves better than its
competitors for small and medium size buffers under all used query-distributions.
Abstract: This study demonstrates the feasibility of joining the commercial pure copper plates by friction stir welding (FSW). Microstructure, microhardness and tensile properties in terms of the joint efficiency were found 94.03 % compare to as receive base material (BM). The average hardness at the top was higher than bottom. Hardness of weld zone was higher than the base material. Different microstructure zones were revealed by optical microscopy and scanning electron microscopy. The stirred zone (SZ) exhibited primary two phases namely, recrystallized grains and fine precipitates in matrix of copper.
Abstract: Adenylate kinase (AK) catalyse the phosphotransferase
reaction plays an important role in cellular energy homeostasis. The
inhibitors of bacterial AK are useful in the treatment of several
bacterial infections. To the novel inhibitors of AK, docking studies
performed by using the 3D structure of Bacillus stearothermophilus
adenylate kinase from protein data bank (IZIP). 46 Quinoxaline
analogues were docked in 1ZIP and selected the highly interacting
compounds based on their binding energies, for further studies
Abstract: This paper presents an innovative computer system
that contributes to sustainable development of the enterprise. The
research refers to a rethinking of traditional systems of collaboration
and risk assessment, present in any organization, leading to a
sustainable enterprise. This concept integrates emerging tools that
allow the implementation and exploitation of the collective
intelligence of the enterprise, allowing the exchange of contextual,
agile and simplified information, and collaboration with networks of
customers and partners in an environment where risks are controlled.
Risk assessment is done in a systemic way: the enterprise as the
system compared to the contained departments and the enterprise as a
subsystem compared to: families of international standards and
sustainability-s responsibilities. The enterprise, in this systemic
vision, responds to the requirements that any existing system to
operate continuously in an indefinite future without reaching key
resource depletion. The research is done by integrating collaborative
science, engineering, management, psychology, obtaining thus a
cornerstone of sustainable development of the enterprise.
Abstract: The Zung self-depression scale and Beck Anxiety Inventory were used both to study the depression and anxiety levels of Armenian Crohn’s disease patients, and to reveal the relation between emotional status and placebo effect of these patients. On the other hand, the blood cell analyses and gut bacteria investigations were used to assess the placebo effect on ESR, and haemoglobin-s and leukocyte-s levels as well as gut commensal E. coli quantities of these patients. Despite of registered high levels of depression and anxiety, the high placebo effect on psychoemotional status for investigated patients during the investigations was described. On the other hand, no positive effect of placebo on measurements of ESP and hemoglobin-s levels of Crohn’s disease patients was revealed. The importance of use of psychotherapies for optimal outcomes during treatments of Crohn’s disease is discussed.
Abstract: The underground shopping mall has the constructional
problem of the fire evacuation. Also, the people sometimes lose their
direction and information of current time in the mall. If the
emergencies such as terrorist explosions or gas explosions are
happened, they have to go out soon. Under such circumstances, inside
of the mall has high risk for life. In this research, the authors propose a
way that he/she can go out from the underground shopping mall
quickly. If the narrow exits are discovered by using active RFID
(Radio Frequency Identification) tags and using cellular phones, they
can evacuate as soon as possible. To verify this hypothesis, the authors
design the model and carry out the agent-based simulation. They treat,
as a case study, the Tenjin mall in Fukuoka Prefecture in Japan. The
result of the simulation is that the case of the pedestrian with using
active RFID tags and cellular phones reduced the amount of time to
spend on the evacuation. Even if the diffusion of RFID tags and
cellular phones was not perfect, they could show the effectiveness of
reducing the time of evacuation.
Abstract: Quality control in ceramic tile manufacturing is hard, labor intensive and it is performed in a harsh industrial environment with noise, extreme temperature and humidity. It can be divided into color analysis, dimension verification, and surface defect detection, which is the main purpose of our work. Defects detection is still based on the judgment of human operators while most of the other manufacturing activities are automated so, our work is a quality control enhancement by integrating a visual control stage using image processing and morphological operation techniques before the packing operation to improve the homogeneity of batches received by final users.
Abstract: Nowadays the market for industrial companies is becoming more and more globalized and highly competitive, forcing them to shorten the duration of the manufacturing system development time in order to reduce the time to market. In order to achieve this target, the hierarchical systems used in previous manufacturing systems are not enough because they cannot deal effectively with unexpected situations. To achieve flexibility in manufacturing systems, the concept of an Autonomous Decentralized Flexible Manufacturing System (AD-FMS) is useful. In this paper, we introduce a hypothetical reasoning based algorithm called the Algorithm for Future Anticipative Reasoning (AFAR) which is able to decide on a conceivable next action of an Automated Guided Vehicle (AGV) that works autonomously in the AD-FMS.
Abstract: Occurrence of a multiple-points fault in machine operations could result in exhibiting complex fault signatures, which could result in lowering fault diagnosis accuracy. In this study, a multiple-points defect model (MPDM) is proposed which can simulate fault signature-s dynamics for n-points bearing faults. Furthermore, this study identifies that in case of multiple-points fault in the rotary machine, the location of the dominant component of defect frequency shifts depending upon the relative location of the fault points which could mislead the fault diagnostic model to inaccurate detections. Analytical and experimental results are presented to characterize and validate the variation in the dominant component of defect frequency. Based on envelop detection analysis, a modification is recommended in the existing fault diagnostic models to consider the multiples of defect frequency rather than only considering the frequency spectrum at the defect frequency in order to incorporate the impact of multiple points fault.
Abstract: In this paper, we propose a fast and efficient method for drawing very large-scale graph data. The conventional force-directed method proposed by Fruchterman and Rheingold (FR method) is well-known. It defines repulsive forces between every pair of nodes and attractive forces between connected nodes on a edge and calculates corresponding potential energy. An optimal layout is obtained by iteratively updating node positions to minimize the potential energy. Here, the positions of the nodes are updated every global timestep at the same time. In the proposed method, each node has its own individual time and time step, and nodes are updated at different frequencies depending on the local situation. The proposed method is inspired by the hierarchical individual time step method used for the high accuracy calculations for dense particle fields such as star clusters in astrophysical dynamics. Experiments show that the proposed method outperforms the original FR method in both speed and accuracy. We implement the proposed method on the MDGRAPE-3 PCI-X special purpose parallel computer and realize a speed enhancement of several hundred times.
Abstract: The evolution of logic circuits, which falls under the heading of evolvable hardware, is carried out by evolutionary algorithms. These algorithms are able to automatically configure reconfigurable devices. One of main difficulties in developing evolvable hardware with the ability to design functional electrical circuits is to choose the most favourable EA features such as fitness function, chromosome representations, population size, genetic operators and individual selection. Until now several researchers from the evolvable hardware community have used and tuned these parameters and various rules on how to select the value of a particular parameter have been proposed. However, to date, no one has presented a study regarding the size of the chromosome representation (circuit layout) to be used as a platform for the evolution in order to increase the evolvability, reduce the number of generations and optimize the digital logic circuits through reducing the number of logic gates. In this paper this topic has been thoroughly investigated and the optimal parameters for these EA features have been proposed. The evolution of logic circuits has been carried out by an extrinsic evolvable hardware system which uses (1+λ) evolution strategy as the core of the evolution.
Abstract: Intelligent Transportation System integrates various modern advanced technologies into the ground transportation system, and it will be the goal of urban transport system in the future because of its comprehensive effects. However, it also brings some problems, such as project performance assessment, fairness of benefiting groups, fund management, which are directly related to its operation and implementation. Wuhan has difficulties in organizing transportation because of its nature feature (river and lake), therefore, calling Service of Taxi plays an important role in transportation. This paper researches on calling Service of Taxi in Wuhan, based on quantitative and qualitative analysis. It analyzes its operations management systematically, including business model, finance, usage analysis and users evaluation. As for business model, it is that the government leads the operation at the initial stage, and the third part dominates the operation at the mature stage, which not only eases the pressure of the third part and benefits the spread of the calling service at the initial stage, but also alleviates financial pressure of government and improve the efficiency of the operation at the mature stage. As for finance, it draws that this service will bring heavy financial burden of equipments, but it will be alleviated in the future because of its spread. As for usage analysis, through data comparison, this service can bring some benefits for taxi drivers, and time and spatial distribution of usage have certain features. As for user evaluation, it analyzes using group and the reason why choosing it. At last, according to the analysis above, the paper puts forward the potentials, limitations, and future development strategies for it.
Abstract: Mixed Reality (MR) is one of the newest technologies
explored in education. It promises the potential to promote teaching
and learning and making learners- experience more “engaging".
However, there still lack of research on designing a virtual learning
environment using MR technology. In this paper, we describe the
Mixed Reality technology, the characteristics of situated learning as
instructional design for virtual environment using mixed reality
technology. We also explain a case study that implemented those
design and also the system overview.
Abstract: This work presents the first results from the long-term laboratory experiment dealing with impact of drought on soil properties. Three groups of the treatment (A, B and C) with different regime of irrigation were prepared. The soil water content was maintained at 70 % of soil water holding capacity in group A, at 40 % in group B. In group C, soil water regime was maintained in the range of wilting point. Each group of the experiment was divided into three variants (A1 = B1, C1; A2 = B2, C2 etc.) with three repetitions: Variants A1 (B1, C1) were a controls without addition of another fertilizer. Variants A2 (B2, C2) were fertilized with mineral nitrogen fertilizer DAM 390 (0.140 Mg of N per ha) and variants A3 (B3, C3) contained 45 g of Cp per a pot.
The significant differences (ANOVA, P
Abstract: The objective of this study was to develop vaginal
suppository containing lactobacillus. Four kinds of vaginal
suppositories containing Lactobacillus paracasei HL32 were
formulated: 1) a conventional suppository with Witepsol H-15 as a
base, 2) a conventional suppository with mixed polyethylene glycols
(PEGs) as a base, 3) a hollow-type suppository with Witepsol H-15
as a base and 4) a hollow-type suppository with mixed PEGs as a
base. The release studies demonstrated that the hollow-type
suppository with mixed PEGs as the base gave the highest release of
L. paracasei HL32 and was microbiological stable after storage at 2-
8°C over the period of 3 months.
Abstract: Optimal supplementary damping controller design for Thyristor Controlled Series Compensator (TCSC) is presented in this paper. For the proposed controller design, a multi-objective fitness function consisting of both damping factors and real part of system electromachanical eigenvalue is used and Real- Coded Genetic Algorithm (RCGA) is employed for the optimal supplementary controller parameters. The performance of the designed supplementary TCSC-based damping controller is tested on a weakly connected power system with different disturbances and loading conditions with parameter variations. Simulation results are presented and compared with a conventional power system stabilizer and also with the TCSC-based supplementary controller when the controller parameters are not optimized to show the effectiveness and robustness of the proposed approach over a wide range of loading conditions and disturbances.
Abstract: In this paper we would like to introduce some of the
best practices of using semantic markup and its significance in the
success of web applications. Search engines are one of the best ways
to reach potential customers and are some of the main indicators of
web sites' fruitfulness. We will introduce the most important
semantic vocabularies which are used by Google and Yahoo.
Afterwards, we will explain the process of semantic markup
implementation and its significance for search engines and other
semantic markup consumers. We will describe techniques for slow
conceiving RDFa markup to our web application for collecting Call
for papers (CFP) announcements.
Abstract: The need for Information Security in organizations, regardless of their type and size, is being addressed by emerging standards and recommended best practices. The various standards and practices which evolved in recent years and are still being developed and constantly revised, address the issue of Information Security from different angles. This paper attempts to provide an overview of Information Security Standards and Practices by briefly discussing some of the most popular ones. Through a comparative study of their similarities and differences, some insight can be obtained on how their combination may lead to an increased level of Information Security.
Abstract: Numerical studies on race car aerodynamics at wing
in ground effect have been carried out using a steady 3d, double
precision, pressure-based, and standard k-epsilon turbulence model.
Through various parametric analytical studies we have observed that
at a particular speed and ground clearance of the wings a favorable
negative lift was found high at a particular angle of attack for all the
physical models considered in this paper. The fact is that if the
ground clearance height to chord length (h/c) is too small, the
developing boundary layers from either side (the ground and the
lower surface of the wing) can interact, leading to an altered variation
of the aerodynamic characteristics at wing in ground effect. Therefore
a suitable ground clearance must be predicted throughout the racing
for a better performance of the race car, which obviously depends
upon the coupled effects of the topography, wing orientation with
respect to the ground, the incoming flow features and/or the race car
speed. We have concluded that for the design of high performance
and high speed race cars the adjustable wings capable to alter the
ground clearance and the angles of attack is the best design option for
any race car for racing safely with variable speeds.
Abstract: Water borne polyurethane (PU) based on newly prepared hyperbranched poly (amine-ester) (HBPAE) was applied and evaluated as organic coating material. HBPAE was prepared through one-pot synthesis between trimethylol propane as a core and AB2 branched monomer which was obtained via Michal addition of methyl methacrylate (MMA) and diethanol amine (DEA). PU was prepared from HBPAE using different ratios of toluene diisocyanate (TDI) to form cured coating film. The prepared HBPAE was characterized using; GPC, FT-IR and 1H-NMR. The mechanical properties (impact, hardness, adhesion, and flexibility), thermal properties (DSC and TGA) and chemical resistance of the applied film were estimated. The results indicated 50% of TDI is the selected ratio. This formulation represents a promising candidate to be used as coating material.