Abstract: This paper discusses the approach of real-time
controlling of the energy management system using the data
acquisition tool of LabVIEW. The main idea of this inspiration was
to interface the Station (PC) with the system and publish the data on
internet using LabVIEW. In this venture, controlling and switching of
3 phase AC loads are effectively and efficiently done. The phases are
also sensed through devices. In case of any failure the attached
generator starts functioning automatically. The computer sends
command to the system and system respond to the request. The
modern feature is to access and control the system world-wide using
world wide web (internet). This controlling can be done at any time
from anywhere to effectively use the energy especially in developing
countries where energy management is a big problem. In this system
totally integrated devices are used to operate via remote location.
Abstract: The myoelectric signal (MES) is one of the Biosignals
utilized in helping humans to control equipments. Recent approaches
in MES classification to control prosthetic devices employing pattern
recognition techniques revealed two problems, first, the classification
performance of the system starts degrading when the number of
motion classes to be classified increases, second, in order to solve the
first problem, additional complicated methods were utilized which
increase the computational cost of a multifunction myoelectric
control system. In an effort to solve these problems and to achieve a
feasible design for real time implementation with high overall
accuracy, this paper presents a new method for feature extraction in
MES recognition systems. The method works by extracting features
using Wavelet Packet Transform (WPT) applied on the MES from
multiple channels, and then employs Fuzzy c-means (FCM)
algorithm to generate a measure that judges on features suitability for
classification. Finally, Principle Component Analysis (PCA) is
utilized to reduce the size of the data before computing the
classification accuracy with a multilayer perceptron neural network.
The proposed system produces powerful classification results (99%
accuracy) by using only a small portion of the original feature set.
Abstract: Haptics has been used extensively in many applications especially in human machine interaction and virtual reality systems. Haptic technology allows user to perceive virtual reality as in real world. However, commercially available haptic devices are expensive and may not be suitable for educational purpose. This paper describes the design and development of a low cost haptic knob, with only one degree of freedom, for use in rehabilitation or training hand pronation and supination. End-effectors can be changed to suit different applications or variation in hand sizes and hand orientation.
Abstract: For many industrial applications plate heat
exchangers are demonstrating a large superiority over the
other types of heat exchangers. The efficiency of such a
device depends on numerous factors the effect of which needs
to be analysed and accurately evaluated.
In this paper we present a theoretical analysis of a cocurrent
plate heat exchanger and the results of its numerical
simulation.
Knowing the hot and the cold fluid streams inlet temperatures,
the respective heat capacities mCp
and the value of the
overall heat transfer coefficient, a 1-D mathematical model
based on the steady flow energy balance for a differential
length of the device is developed resulting in a set of N first
order differential equations with boundary conditions where N
is the number of channels.For specific heat exchanger
geometry and operational parameters, the problem is
numerically solved using the shooting method.
The simulation allows the prediction of the temperature
map in the heat exchanger and hence, the evaluation of its
performances. A parametric analysis is performed to evaluate
the influence of the R-parameter on the e-NTU values. For
practical purposes effectiveness-NTU graphs are elaborated
for specific heat exchanger geometry and different operating
conditions.
Abstract: In this paper the FPGA implementations for four
stream ciphers are presented. The two stream ciphers, MUGI and
SNOW 2.0 are recently adopted by the International Organization for
Standardization ISO/IEC 18033-4:2005 standard. The other two
stream ciphers, MICKEY 128 and TRIVIUM have been submitted
and are under consideration for the eSTREAM, the ECRYPT
(European Network of Excellence for Cryptology) Stream Cipher
project. All ciphers were coded using VHDL language. For the
hardware implementation, an FPGA device was used. The proposed
implementations achieve throughputs range from 166 Mbps for
MICKEY 128 to 6080 Mbps for MUGI.
Abstract: Among the various cooling processes in industrial
applications such as: electronic devices, heat exchangers, gas
turbines, etc. Gas turbine blades cooling is the most challenging one.
One of the most common practices is using ribbed wall because of
the boundary layer excitation and therefore making the ultimate
cooling. Vortex formation between rib and channel wall will result in
a complicated behavior of flow regime. At the other hand, selecting
the most efficient method for capturing the best results comparing to
experimental works would be a fascinating issue. In this paper 4
common methods in turbulence modeling: standard k-e, rationalized
k-e with enhanced wall boundary layer treatment, k-w and RSM
(Reynolds stress model) are employed to a square ribbed channel to
investigate the separation and thermal behavior of the flow in the
channel. Finally all results from different methods which are used in
this paper will be compared with experimental data available in
literature to ensure the numerical method accuracy.
Abstract: Surveillance system is widely used in the traffic
monitoring. The deployment of cameras is moving toward a
ubiquitous camera (UbiCam) environment. In our previous study, a
novel service, called GPS-VT, was firstly proposed by incorporating
global positioning system (GPS) and visual tracking techniques for
the UbiCam environment. The first prototype is called GODTA
(GPS-based Moving Object Detection and Tracking Approach). For a
moving person carried GPS-enabled mobile device, he can be
tracking when he enters the field-of-view (FOV) of a camera
according to his real-time GPS coordinate. In this paper, GPS-VT
service is applied to the tracking of vehicles. The moving speed of a
vehicle is much faster than a person. It means that the time passing
through the FOV is much shorter than that of a person. Besides, the
update interval of GPS coordinate is once per second, it is
asynchronous with the frame rate of the real-time image. The above
asynchronous is worsen by the network transmission delay. These
factors are the main challenging to fulfill GPS-VT service on a
vehicle.In order to overcome the influence of the above factors, a
back-propagation neural network (BPNN) is used to predict the
possible lane before the vehicle enters the FOV of a camera. Then, a
template matching technique is used for the visual tracking of a target
vehicle. The experimental result shows that the target vehicle can be
located and tracking successfully. The success location rate of the
implemented prototype is higher than that of the previous GODTA.
Abstract: Least Development Countries (LDC) like
Bangladesh, whose 25% revenue earning is achieved from Textile
export, requires producing less defective textile for minimizing
production cost and time. Inspection processes done on these
industries are mostly manual and time consuming. To reduce error
on identifying fabric defects requires more automotive and
accurate inspection process. Considering this lacking, this research
implements a Textile Defect Recognizer which uses computer
vision methodology with the combination of multi-layer neural
networks to identify four classifications of textile defects. The
recognizer, suitable for LDC countries, identifies the fabric defects
within economical cost and produces less error prone inspection
system in real time. In order to generate input set for the neural
network, primarily the recognizer captures digital fabric images by
image acquisition device and converts the RGB images into binary
images by restoration process and local threshold techniques.
Later, the output of the processed image, the area of the faulty
portion, the number of objects of the image and the sharp factor of
the image, are feed backed as an input layer to the neural network
which uses back propagation algorithm to compute the weighted
factors and generates the desired classifications of defects as an
output.
Abstract: The increasing development of wireless networks and
the widespread popularity of handheld devices such as Personal
Digital Assistants (PDAs), mobile phones and wireless tablets
represents an incredible opportunity to enable mobile devices as a
universal payment method, involving daily financial transactions.
Unfortunately, some issues hampering the widespread acceptance of
mobile payment such as accountability properties, privacy protection,
limitation of wireless network and mobile device. Recently, many
public-key cryptography based mobile payment protocol have been
proposed. However, limited capabilities of mobile devices and
wireless networks make these protocols are unsuitable for mobile
network. Moreover, these protocols were designed to preserve
traditional flow of payment data, which is vulnerable to attack and
increase the user-s risk. In this paper, we propose a private mobile
payment protocol which based on client centric model and by
employing symmetric key operations. The proposed mobile payment
protocol not only minimizes the computational operations and
communication passes between the engaging parties, but also
achieves a completely privacy protection for the payer. The future
work will concentrate on improving the verification solution to
support mobile user authentication and authorization for mobile
payment transactions.
Abstract: Unintentional falls are rife throughout the ages and
have been the common factor of serious or critical injuries especially
for the elderly society. Fortunately, owing to the recent rapid
advancement in technology, fall detection system is made possible,
enabling detection of falling events for the elderly, monitoring the
patient and consequently provides emergency support in the event of
falling. This paper presents a review of 3 main categories of fall
detection techniques, ranging from year 2005 to year 2010. This
paper will be focusing on discussing the techniques alongside with
summary and conclusion for them.
Abstract: Eight Etawah cross bred does were divided into two
groups based on body condition score (BCS). Group I (BSC 2, body
weight 25-30 kg; n = 4), and Group II (BSC 3, body weight, 35-40 kg, n=4). All does received intravaginal controlled internal drug
release devices (CIDR) for 10 days, and a prostaglandin F2α at 48 h before CIDR removal. Estrus detection was carried out using
vasectomized buck. Vaginal epithelium was taken to determine estrus cycle. Blood samples were taken every 3-6 hours, started from
moment of CIDR removal until the end of estrus. The results showed vaginal histological indicated estrus occurred at the hours of 25 to 60
and 30 to 70 post CIDR removal in BCS 2 and 3, respectively. Progesterone peak of BCS 2 and BCS 3 were 0.18±0.31 and
0.48±0.31 ng/mL on the hour 0 post CIDR removal. Estradiol -17ß
peak of each group was 53.25±35.08 and 89.91±92.84 pg/mL at 48
post CIDR removal. LH surge only occurred on BCS 3 groups, the LH concentrations were 9.9± 9.1; 4.5± 4.0; and 18.2± 9.1 ng/mL at
45, 48 and 51 hours post CIDR removal, respectively. It was concluded that the BCS had effects on vaginal histological changes
and LH surge.
Abstract: Phase locked loops in 10 Gb/s and faster data links are
low phase noise devices. Characterization of their phase jitter
transfer functions is difficult because the intrinsic noise of the PLLs
is comparable to the phase noise of the reference clock signal. The
problem is solved by using a linear model to account for the intrinsic
noise. This study also introduces a novel technique for measuring the
transfer function. It involves the use of the reference clock as a
source of wideband excitation, in contrast to the commonly used
sinusoidal excitations at discrete frequencies. The data reported here
include the intrinsic noise of a PLL for 10 Gb/s links and the jitter
transfer function of a PLL for 12.8 Gb/s links. The measured transfer
function suggests that the PLL responded like a second order linear
system to a low noise reference clock.
Abstract: We develop a new interface for Bus-Net which is
optimized for a smartphone. We are continuing to develop the shortest
path planning system of public transportation called "Bus-Net" in
Tottori prefecture as web application to improve the usability of
public transportation. Recent trend of computing platform, however
has shifted to an advanced mobile device called a smartphone such as
iPhone and Android in Japan. A smartphone has different characters
with existing feature phone in terms of OS, large touche panel, and
several other features. We derive a guideline to design the new interface
for a smartphone to full use of the functionality. The guideline is
about simplicity of user-s operation, location awareness and usability.
We developed the new interface for “Bus-Net" on iPhone referring
to the guideline. Due to the evaluation, the application interface we
developed is better than the existing web-based interface in terms of
the usability.
Abstract: The rapid development of the BlackBerry games industry and its development goals were not just for entertainment, but also used for educational of students interactively. Unfortunately the development of adaptive educational games on BlackBerry in Indonesian language that interesting and entertaining for learning process is very limited. This paper shows the research of development of novel adaptive educational games for students who can adjust the difficulty level of games based on the ability of the user, so that it can motivate students to continue to play these games. We propose a method where these games can adjust the level of difficulty, based on the assessment of the results of previous problems using neural networks with three inputs in the form of percentage correct, the speed of answer and interest mode of games (animation / lessons) and 1 output. The experimental results are presented and show the adaptive games are running well on mobile devices based on BlackBerry platform
Abstract: This paper reports the findings of a research
conducted to evaluate the ownership and usage of technology devices
within Distance Education students- according to their age. This
research involved 45 Distance Education students from USM
Universiti Sains Malaysia (DEUSM) as its respondents. Data was
collected through questionnaire that had been developed by the
researchers based on some literature review. The data was analyzed
to find out the frequencies of respondents agreements towards
ownership of technology devices and the use of technology devices.
The findings shows that all respondents own mobile phone and
majority of them reveal that they use mobile on regular basis. The
student in the age 30-39 has the heist ownership of the technology
devices.
Abstract: Suppose KY and KX are large sets of observed and
reference signals, respectively, each containing N signals. Is it possible to construct a filter F : KY → KX that requires a priori
information only on few signals, p N, from KX but performs better than the known filters based on a priori information on every
reference signal from KX? It is shown that the positive answer is
achievable under quite unrestrictive assumptions. The device behind
the proposed method is based on a special extension of the piecewise
linear interpolation technique to the case of random signal sets. The proposed technique provides a single filter to process any signal from
the arbitrarily large signal set. The filter is determined in terms of pseudo-inverse matrices so that it always exists.
Abstract: In this paper, zigbee communication based wireless energy surveillance system is presented. The proposed system consists of multiple energy surveillance devices and an energy surveillance monitor. Each different standby power-off value of electric device is set automatically by using learning function of energy surveillance device. Thus adaptive standby power-off function provides user convenience and it maximizes the energy savings. Also, power consumption monitoring function is helpful to reduce inefficient energy consumption in home. The zigbee throughput simulator is designed to evaluate minimum transmission power and maximum allowable information quantity in the proposed system. The test result of prototype has been satisfied all the requirements. The proposed system has confirmed that can be used as an intelligent energy surveillance system for energy savings in home or office.
Abstract: Traditional optical networks are gradually evolving towards intelligent optical networks due to the need for faster bandwidth provisioning, protection and restoration of the network that can be accomplished with devices like optical switch, add drop multiplexer and cross connects. Since dense wavelength multiplexing forms the physical layer for intelligent optical networking, the roll of high speed all optical switch is important. This paper analyzes such an ultra-high speed polymer electro-optic switch. The performances of the 2x2 optical waveguide switch with rectangular, triangular and trapezoidal grating profiles on various device parameters are analyzed. The simulation result shows that trapezoidal grating is the optimized structure which has the coupling length of 81μm and switching voltage of 11V for the operating wavelength of 1550nm. The switching time for this proposed switch is 0.47 picosecond. This makes the proposed switch to be an important element in the intelligent optical network.
Abstract: In the last decade, energy based control theory has undergone a significant breakthrough in dealing with underactated mechanical systems with two successful and similar tools, controlled Lagrangians and controlled Hamiltanians (IDA-PBC). However, because of the complexity of these tools, successful case studies are lacking, in particular, MIMO cases. The seminal theoretical paper of controlled Lagrangians proposed by Bloch and his colleagues presented a benchmark example–a 4 d.o.f underactuated pendulum on a cart but a detailed and completed design is neglected. To compensate this ignorance, the note revisit their design idea by addressing explicit control functions for a similar device motivated by a vector thrust body hovering in the air. To the best of our knowledge, this system is the first MIMO, underactuated example that is stabilized by using energy based tools at the courtesy of the original design idea. Some observations are given based on computer simulation.
Abstract: In this paper, we propose an effective relay
communication for layered video transmission as an alternative to
make the most of limited resources in a wireless communication
network where loss often occurs. Relaying brings stable multimedia
services to end clients, compared to multiple description coding
(MDC). Also, retransmission of only parity data about one or more
video layer using channel coder to the end client of the relay device is
paramount to the robustness of the loss situation. Using these
methods in resource-constrained environments, such as real-time user
created content (UCC) with layered video transmission, can provide
high-quality services even in a poor communication environment.
Minimal services are also possible. The mathematical analysis shows
that the proposed method reduced the probability of GOP loss rate
compared to MDC and raptor code without relay. The GOP loss rate
is about zero, while MDC and raptor code without relay have a GOP
loss rate of 36% and 70% in case of 10% frame loss rate.