Abstract: Today’s modern interconnected power system is
highly complex in nature. In this, one of the most important
requirements during the operation of the electric power system is the
reliability and security. Power and frequency oscillation damping
mechanism improve the reliability. Because of power system
stabilizer (PSS) low speed response against of major fault such as
three phase short circuit, FACTs devise that can control the network
condition in very fast time, are becoming popular. But FACTs
capability can be seen in a major fault present when nonlinear models
of FACTs devise and power system equipment are applied. To realize
this aim, the model of multi-machine power system with FACTs
controller is developed in MATLAB/SIMULINK using Sim Power
System (SPS) blockiest. Among the FACTs device, Static
synchronous series compensator (SSSC) due to high speed changes
its reactance characteristic inductive to capacitive, is effective power
flow controller. Tuning process of controller parameter can be
performed using different method. But Genetic Algorithm (GA)
ability tends to use it in controller parameter tuning process. In this
paper firstly POD controller is used to power oscillation damping.
But in this station, frequency oscillation dos not has proper damping
situation. So FOD controller that is tuned using GA is using that
cause to damp out frequency oscillation properly and power
oscillation damping has suitable situation.
Abstract: E-business technologies, whereby business
transactions are conducted remotely using the Internet, present
unique opportunities and challenges for business. E-business
technologies are applicable to a wide range of organizations and
small and medium-sized enterprises (SMEs) are no exception. There
is an established body of literature about e-business, looking at
definitions, concepts, benefits and challenges. In general, however,
the research focus has been on larger organizations, not SMEs. In an
attempt to redress the balance of research, this paper looks at ebusiness
technologies specifically from a small business perspective.
It seeks to identify the possible barriers that SMEs might face when
considering adoption of the e-business concept and practice as part of
their business process change initiatives and implementation. To
facilitate analysis of these barriers a conceptual framework has been
developed which outlines the key conceptual and practical challenges
of e-business implementation in SMEs. This is developed following a
literature survey comprised of three categories: characteristics of
SMEs, issues of IS/IT use in SMEs and general e-business adoption
and implementation issues. The framework is then empirically
assessed against 7 SMEs who have yet to implement e-business or
whose e-business efforts have been unsatisfactory. Conclusions from
the case studies can be used to verify the framework, and set
parameters for further larger scale empirical investigation.
Abstract: In the UK, flooding is responsible for significant
losses to the economy due to the impact on businesses, the vast
majority of which are Small and Medium Enterprises (SMEs).
Businesses of this nature tend to lack formal plans to aid their
response to and recovery from disruptive events such as flooding.
This paper reports on work on how an agent-based model (ABM) is
being developed based on interview data gathered from SMEs at-risk
of flooding and/or have direct experience of flooding. The ABM will
enable simulations to be performed allowing investigations of
different response strategies which SMEs may employ to lessen the
impact of flooding, thus strengthening their resilience.
Abstract: A key issue in seismic risk analysis within the context
of Performance-Based Earthquake Engineering is the evaluation of
the expected seismic damage of structures under a specific
earthquake ground motion. The assessment of the seismic
performance strongly depends on the choice of the seismic Intensity
Measure (IM), which quantifies the characteristics of a ground
motion that are important to the nonlinear structural response. Several
conventional IMs of ground motion have been used to estimate their
damage potential to structures. Yet, none of them has been proved to
be able to predict adequately the seismic damage. Therefore,
alternative, scalar intensity measures, which take into account not
only ground motion characteristics but also structural information
have been proposed. Some of these IMs are based on integration of
spectral values over a range of periods, in an attempt to account for
the information that the shape of the acceleration, velocity or
displacement spectrum provides. The adequacy of a number of these
IMs in predicting the structural damage of 3D R/C buildings is
investigated in the present paper. The investigated IMs, some of
which are structure specific and some are non structure-specific, are
defined via integration of spectral values. To achieve this purpose
three symmetric in plan R/C buildings are studied. The buildings are
subjected to 59 bidirectional earthquake ground motions. The two
horizontal accelerograms of each ground motion are applied along
the structural axes. The response is determined by nonlinear time
history analysis. The structural damage is expressed in terms of the
maximum interstory drift as well as the overall structural damage
index. The values of the aforementioned seismic damage measures
are correlated with seven scalar ground motion IMs. The comparative
assessment of the results revealed that the structure-specific IMs
present higher correlation with the seismic damage of the three
buildings. However, the adequacy of the IMs for estimation of the
structural damage depends on the response parameter adopted.
Furthermore, it was confirmed that the widely used spectral
acceleration at the fundamental period of the structure is a good
indicator of the expected earthquake damage level.
Abstract: Currently, seismic probabilistic risk assessments
(SPRA) for nuclear facilities use In-Structure Response Spectra
(ISRS) in the calculation of fragilities for systems and components.
ISRS are calculated via dynamic analyses of the host building
subjected to two orthogonal components of horizontal ground
motion. Each component is defined as the median motion in any
horizontal direction. Structural engineers applied the components
along selected X and Y Cartesian axes. The ISRS at different
locations in the building are also calculated in the X and Y directions.
The choice of the directions of X and Y are not specified by the
ground motion model with respect to geographic coordinates, and are
rather arbitrarily selected by the structural engineer. Normally, X and
Y coincide with the “principal” axes of the building, in the
understanding that this practice is generally conservative. For SPRA
purposes, however, it is desirable to remove any conservatism in the
estimates of median ISRS. This paper examines the effects of the
direction of horizontal seismic motion on the ISRS on typical nuclear
structure. We also evaluate the variability of ISRS calculated along
different horizontal directions. Our results indicate that some central
measures of the ISRS provide robust estimates that are practically
independent of the selection of the directions of the horizontal
Cartesian axes.
Abstract: This research work is concerned with the life cycle
assessment (LCA) of an expressway, as well as its infrastructure, in
Thailand. The life cycle of an expressway encompasses the raw
material acquisition phase, the construction phase, the use or service
phase, the rehabilitation phase, and finally the demolition and
disposal phase. The LCA in this research was carried out using CML
baseline 2000 and in accordance with the ISO 14040 standard. A
functional unit refers to transportation of one person over one
kilometer of a 3-lane expressway with a 50-year lifetime. This
research has revealed that the construction phase produced the largest
proportion of the environmental impact (81.46%), followed by the
service, rehabilitation, demolition and disposal phases and
transportation at 11.97%, 3.72% 0.33% and 2.52%, respectively. For
the expressway under study, the total carbon footprint over its
lifetime is equivalent to 245,639 tons CO2-eq per 1 kilometer
functional unit, with the phases of construction, service,
rehabilitation, demolition and disposal and transportation
contributing 153,690; 73,773; 3693, 755 and 13,728 tons CO2-eq,
respectively. The findings could be adopted as a benchmark against
which the environmental impacts of future similar projects can be
measured.
Abstract: The usage of e-health facilities is seen to be the first
priority by the Libyan government. As such this paper focuses on
how the key factors or elements of working size in terms of
technological availability, structural environment, and other
competence-related matters may affect nurses’ sharing of knowledge
in e-health. Hence, this paper investigates learning readiness
assessment to raise e-health for Libyan regional hospitals by using ehealth
services in nursing education.
Abstract: The main objective of the study is focused in
producing slag based geopolymer concrete obtained with the addition
of alkali activator. Test results indicated that the reaction of silicates
in slag is based on the reaction potential of sodium hydroxide and the
formation of alumino-silicates. The study also comprises on the
evaluation of the efficiency of polymer reaction in terms of the
strength gain properties for different geopolymer mixtures.
Geopolymer mixture proportions were designed for different binder
to total aggregate ratio (0.3 & 0.45) and fine to coarse aggregate ratio
(0.4 & 0.8). Geopolymer concrete specimens casted with normal
curing conditions reported a maximum 28 days compressive strength
of 54.75 MPa. The addition of glued steel fibres at 1.0% Vf in
geopolymer concrete showed reasonable improvements on the
compressive strength, split tensile strength and flexural properties of
different geopolymer mixtures. Further, comparative assessment was
made for different geopolymer mixtures and the reinforcing effects of
steel fibres were investigated in different concrete matrix.
Abstract: Curcuma longa L. (Zingiberaceae), commonly known
as turmeric, has a long history of traditional uses for culinary
purposes as a spice and a food colorant. The present study aimed to
document the ethnobotanical knowledge about Curcuma longa, and
to assess the variation in the herbalists’ experience in Northeastern
Algeria. Data were collected using semi-structured questionnaires
and direct interviews with 30 herbalists. Ethnobotanical indices,
including the fidelity level (FL%), the relative frequency citation
(RFC), and use value (UV) were determined by quantitative methods.
Diversity in the level of knowledge was analyzed using univariate,
non-parametric, and multivariate statistical methods. Three main
categories of uses were recorded for C. longa: for food, for medicine,
and for cosmetic purposes. As a medicine, turmeric was used for the
treatment of gastrointestinal, dermatological, and hepatic diseases.
Medicinal and food uses were correlated with both forms of
preparation (rhizome and powder). The age group did not influence
the use. Multivariate analyses showed a significant variation in
traditional knowledge, associated with the use value, origin, quality,
and efficacy of the drug. The findings suggested that the geographical
origin of C. longa affected the use in Algeria.
Abstract: In this paper, we introduce a generalized Chebyshev
collocation method (GCCM) based on the generalized Chebyshev
polynomials for solving stiff systems. For employing a technique
of the embedded Runge-Kutta method used in explicit schemes, the
property of the generalized Chebyshev polynomials is used, in which
the nodes for the higher degree polynomial are overlapped with those
for the lower degree polynomial. The constructed algorithm controls
both the error and the time step size simultaneously and further
the errors at each integration step are embedded in the algorithm
itself, which provides the efficiency of the computational cost. For
the assessment of the effectiveness, numerical results obtained by the
proposed method and the Radau IIA are presented and compared.
Abstract: The development of the agricultural sector in Ghana
has been reliant on the use of irrigation systems to ensure food
security. However, the manual operation of these systems has not
facilitated their maximum efficiency due to human limitations.
This paper seeks to address this problem by designing and
implementing an efficient, cost effective automated system which
monitors and controls the water flow of irrigation through
communication with an authorized operator via text messages. The
automatic control component of the system is timer based with an
Atmega32 microcontroller and a real time clock from the SM5100B
cellular module. For monitoring purposes, the system sends periodic
notification of the system on the performance of duty via SMS to the
authorized person(s). Moreover, the GSM based Irrigation
Monitoring and Control System saves time and labour and reduces
cost of operating irrigation systems by saving electricity usage and
conserving water.
Field tests conducted have proven its operational efficiency and
ease of assessment of farm irrigation equipment due to its costeffectiveness
and data logging capabilities.
Abstract: Since, today in most countries around the world much
attention is paid to planning the smallest unit in the city i.e. the
residential neighborhoods to achieve sustainable urban development
goals, a variety of assessment tools have been developed to assess
and monitor the sustainability of new developments. One of the most
reliable and widely used assessment tools is LEED-ND rating system.
This paper whit the aim of assessing sustainability level of Roshdieh
neighborhood in Tabriz, has introduced this rating system and applied
it in the study area. The results indicate that Roshdieh has the
potential of achieving the standards of sustainable neighborhoods, but
the present situation is far from the ideal point.
Abstract: Stress Corrosion Crack (SCC) in pipeline is a type of
environmentally assisted cracking (EAC), since its discovery in 1965
as a possible cause of failure in pipeline, SCC has caused, on
average, one of two failures per year in the U.S, According to the
NACE SCC DA a pipe line segment is considered susceptible to SCC
if all of the following factors are met: The operating stress exceeds
60% of specified minimum yield strength (SMYS), the operating
temperature exceeds 38°C, the segment is less than 32 km
downstream from a compressor station, the age of the pipeline is
greater than 10 years and the coating type is other than Fusion
Bonded Epoxy(FBE). In this paper as a practical experience in
NISOC, Direct Assessment (DA) Method is used for identification
SCC defect in unpiggable pipeline located downstream of
compressor station.
Abstract: Recent concerns about the value of teaching cursive
handwriting in the classroom are based on the belief that cursive
handwriting or penmanship is an outdated and unnecessary skill in
today’s online world. The discussion of this issue begins with a
description of current initiatives to eliminate handwriting instruction
in schools. This is followed by a brief history of cursive writing
through the ages. Next considered is a description of its benefits as a
preliminary process for younger children as compared with
immediate instruction in keyboarding, particularly in the areas of
vision, cognition, motor skills and automatic fluency. Also
considered, is cursive’s companion, paper itself, and the impact of a
paperless, “screen and keyboard” environment. The discussion
concludes with a consideration of the unique contributions of cursive
and keyboarding as written forms of communication, along with their
respective surfaces, paper and screen. Finally, an assessment of the
practical utility of each skill is followed by an informal assessment of
what is lost and what remains as we move from a predominantly
paper and pen world of handwriting to texting and keyboarding in an
environment of screens.
Abstract: reliability-based methodology for the assessment
and evaluation of reinforced concrete (R/C) structural elements of
concrete structures is presented herein. The results of the reliability
analysis and assessment for R/C structural elements were verified by
the results obtained through deterministic methods. The outcomes of
the reliability-based analysis were compared against currently
adopted safety limits that are incorporated in the reliability indices
β’s, according to international standards and codes. The methodology
is based on probabilistic analysis using reliability concepts and
statistics of the main random variables that are relevant to the subject
matter, and for which they are to be used in the performance-function
equation(s) associated with the structural elements under study.
These methodology techniques can result in reliability index β, which
is commonly known as the reliability index or reliability measure
value that can be utilized to assess and evaluate the safety, human
risk, and functionality of the structural component. Also, these
methods can result in revised partial safety factor values for certain
target reliability indices that can be used for the purpose of
redesigning the R/C elements of the building and in which they could
assist in considering some other remedial actions to improve the
safety and functionality of the member.
Abstract: In this study, we develop a performance evaluation
model based on a multi-attribute utility approach aiming at reaching
the sustainable banking (SB) status. This model is built accounting
for various banks’ stakeholders in a win-win paradigm. In addition, it
offers the opportunity for adopting a global measure of performance
as an indication of a bank’s sustainability degree. This measure is
referred to as banking sustainability performance index (BSPI). This
index may constitute a basis for ranking banks. Moreover, it may
constitute a bridge between the assessment types of financial and
extra-financial rating agencies. A real application is performed on
three French banks.
Abstract: The main aim of this research was to investigate the
perspectives of English language teachers and learners on the effect
of test techniques on reading comprehension, test performance and
assessment. The research has also aimed at finding the differences
between teacher and learner perspectives, specifying the test
techniques which have the highest effect, investigating the other
factors affecting reading comprehension, and comparing the results
with the similar studies. In order to achieve these objectives,
perspectives and findings of different researchers were reviewed, two
different questionnaires were prepared to collect data for the
perspectives of teachers and learners, the questionnaires were applied
to 26 learners and 8 teachers from the University of Batna (Algeria),
and quantitative and qualitative data analysis of the results were
done. The results and analysis of the results show that different test
techniques affect reading comprehension, test performance and
assessment at different percentages rates.
Abstract: The systematic evaluation of manufacturing
technologies with regard to the potential for product designing
constitutes a major challenge. Until now, conventional evaluation
methods primarily consider the costs of manufacturing technologies.
Thus, the potential of manufacturing technologies for achieving
additional product design features is not completely captured. To
compensate this deficit, final evaluations of new technologies are
mainly intuitive in practice. Therefore, an additional evaluation
dimension is needed which takes the potential of manufacturing
technologies for specific realizable product designs into account. In
this paper, we present the approach of an evaluation method for
selecting manufacturing technologies with regard to their potential
for product designing. This research is done within the Fraunhofer
innovation cluster »AdaM« (Adaptive Manufacturing) which targets
the development of resource efficient and adaptive manufacturing
technology processes for complex turbomachinery components.
Abstract: Characterization of the engineering behavior of
unsaturated soil is dependent on the soil-water characteristic curve
(SWCC), a graphical representation of the relationship between water
content or degree of saturation and soil suction. A reasonable
description of the SWCC is thus important for the accurate prediction
of unsaturated soil parameters. The measurement procedures for
determining the SWCC, however, are difficult, expensive, and timeconsuming.
During the past few decades, researchers have laid a
major focus on developing empirical equations for predicting the
SWCC, with a large number of empirical models suggested. One of
the most crucial questions is how precisely existing equations can
represent the SWCC. As different models have different ranges of
capability, it is essential to evaluate the precision of the SWCC
models used for each particular soil type for better SWCC estimation.
It is expected that better estimation of SWCC would be achieved via
a thorough statistical analysis of its distribution within a particular
soil class. With this in view, a statistical analysis was conducted in
order to evaluate the reliability of the SWCC prediction models
against laboratory measurement. Optimization techniques were used
to obtain the best-fit of the model parameters in four forms of SWCC
equation, using laboratory data for relatively coarse-textured (i.e.,
sandy) soil. The four most prominent SWCCs were evaluated and
computed for each sample. The result shows that the Brooks and
Corey model is the most consistent in describing the SWCC for sand
soil type. The Brooks and Corey model prediction also exhibit
compatibility with samples ranging from low to high soil water
content in which subjected to the samples that evaluated in this study.
Abstract: In this paper, we present a comparative assessment of
Space Vector Pulse Width Modulation (SVPWM) and Model
Predictive Control (MPC) for two-level three phase (2L-3P) Voltage
Source Inverter (VSI). VSI with associated system is subjected to
both control techniques and the results are compared.
Matlab/Simulink was used to model, simulate and validate the
control schemes. Findings of this study show that MPC is superior to
SVPWM in terms of total harmonic distortion (THD) and
implementation.