Abstract: Skin detection is an important task for computer
vision systems. A good method of skin detection means a good and
successful result of the system.
The colour is a good descriptor for image segmentation and
classification; it allows detecting skin colour in the images. The
lighting changes and the objects that have a colour similar than skin
colour make the operation of skin detection difficult.
In this paper, we proposed a method using the YCbCr colour space
for skin detection and lighting effects elimination, then we use the
information of texture to eliminate the false regions detected by the
YCbCr skin model.
Abstract: In this work, a polyaniline/Iron oxide (PANI/Fe2O3)
composite was chemically prepared by oxidative polymerization of
aniline in acid medium, in presence of ammonium persulphate as an
oxidant and amount of Fe2O3. The composite was characterized by a
scanning electron microscopy (SEM). The prepared composite has
been used as adsorbent to remove Tartrazine dye form aqueous
solutions.
The effects of initial dye concentration and temperature on the
adsorption capacity of PANI/Fe2O3 for Tartrazine dye have been
studied in this paper.
The Langmuir and Freundlich adsorption models have been used
for the mathematical description of adsorption equilibrium data. The
best fit is obtained using the Freundlich isotherm with an R2 value of
0.998. The change of Gibbs energy, enthalpy, and entropy of
adsorption has been also evaluated for the adsorption of Tartrazine
onto PANI/ Fe2O3. It has been proved according the results that the
adsorption process is endothermic in nature.
Abstract: Forging parts is used to automobiles; because, they have high strength and it is possible to press them into complicated shape. When itis possible to manufacture hollow forging parts, it leads to reduce weightof the automobiles. But, hollow forging parts are confined to axisymmetrical shape. Hollowforging parts that were pressed to complicated shape are expected. Therefore, we forge a blank that aluminum alloy was inserted in stainless steel. After that, we can providecomplex forging parts that are reduced weight,ifit is possible to be melted the aluminum alloy away by using different of melting points.It is necessary to establish heat forging analysis methodon blank consist of stainless steel and aluminum alloy. Because,this forging is different from conventional forging and this technology is not confirmed. In this study, we compared forging experiment with numerical analysis on the view point of forming load and shape after forming and establish how to set the material temperaturesof two metals and material property of stainless steel on the analysis method. Consequently, temperature difference of stainless steel and aluminum alloy was obtained by experiment. We got material property of stainless steel on forging experimental by compression tests. We had compared numerical analysis that was used the temperature difference of two metals and the material property of stainless steel on forging experimental with forging experiment. Forging analysis method on blankconsist of two metals was established by result of numerical analysis having agreedwith result of forging experiment.
Abstract: This paper illustrates the effect of nano Magnesium
Hydroxide (MH) loading on the thermal properties of Low Density
Polyethylene (LDPE)/Poly (ethylene-co vinyl acetate) (EVA) nano
composite. Thermal studies were conducted, as it understanding is
vital for preliminary development of new polymeric systems.
Thermal analysis of nanocomposite was conducted using thermo
gravimetric analysis (TGA), and differential scanning calorimetry
(DSC). Major finding of TGA indicated two main stages of
degradation process found at (350 ± 25oC) and (480 ± 25oC)
respectively. Nano metal filler expressed better fire resistance as it
stand over high degree of temperature. Furthermore, DSC analysis
provided a stable glass temperature around 51 (±1oC) and captured
double melting point at 84 (±2oC) and 108 (±2oC). This binary
melting point reflects the modification of nano filler to the polymer
matrix forming melting crystals of folded and extended chain. The
percent crystallinity of the samples grew vividly with increasing filler
content. Overall, increasing the filler loading improved the
degradation temperature and weight loss evidently and a better
process and phase stability was captured in DSC.
Abstract: Maturity models, used descriptively to explain
changes in reality or normatively to guide managers to make
interventions to make organizations more effective and efficient, are
based on the principles of statistical quality control and PDCA
continuous improvement (Plan, Do, Check, Act). Some frameworks
developed over the concept of maturity models include COBIT,
CMM, and ITIL.
This paper presents some limitations of traditional maturity
models, most of them related to the mechanistic and reductionist
principles over which those models are built. As systems theory helps
the understanding of the dynamics of organizations and
organizational change, the development of a systemic maturity model
can help to overcome some of those limitations.
This document proposes a systemic maturity model, based on a
systemic conceptualization of organizations, focused on the study of
the functioning of the parties, the relationships among them, and their
behavior as a whole. The concept of maturity from the system theory
perspective is conceptually defined as an emergent property of the
organization, which arises as a result of the degree of alignment and
integration of their processes. This concept is operationalized through
a systemic function that measures the maturity of organizations, and
finally validated by the measuring of maturity in some organizations.
For its operationalization and validation, the model was applied to
measure the maturity of organizational Governance, Risk and
Compliance (GRC) processes.
Abstract: Aim of this work was to study the genetic basis for oil
accumulation in olive fruit via tracking DGAT2 (Diacylglycerol
acyltransferase type-2) gene in three Egyptian Origen Olive cultivars
namely Toffahi, Hamed and Maraki using molecular marker
techniques and bioinformatics tools. Results illustrate that, firstly:
specific genomic band of Maraki cultivars was identified as DGAT2
(Diacylglycerol acyltransferase type-2) and identical for this gene in
Olea europaea with 100% of similarity. Secondly, differential
genomic band of Maraki cultivars which produced from RAPD
fingerprinting technique reflected predicted distinguished sequence
which identified as DGAT2 (Diacylglycerol acyltransferase type-2)
in Fragaria vesca subsp. Vesca with 76% of sequential similarity.
Third and finally, specific genomic specific band of Hamed cultivars
was identified as two fragments, 1- Olea europaea cultivar Koroneiki
diacylglycerol acyltransferase type 2 mRNA, complete cds with two
matches regions with 99% or 2- Predicted: Fragaria vesca subsp.
vesca diacylglycerol O-acyltransferase 2-like (LOC101313050),
mRNA with 86 % of similarity.
Abstract: The reliability of the filtered HVBK model is now
investigated via some large eddy simulations (LES) of freely
decaying isotropic superfluid turbulence. For homogeneous
turbulence at very high Reynolds numbers, comparison of the terms
in the spectral kinetic energy budget equation indicates, in the
energy-containing range, that the production and energy transfer
effects become significant except for dissipation. In the inertial range,
where the two fluids are perfectly locked, the mutual friction maybe
neglected with respect to other terms. Also, the LES results for the
other terms of the energy balance are presented.
Abstract: The Lean Environmental Management Integration
System (LEMIS) framework development is integration between lean
core element and ISO 14001. The curiosity on the relationship
between continuous improvement and sustainability of lean
implementation has influenced this study toward LEMIS.
Characteristic of ISO 14001 standard clauses and core elements of
lean principles are explored from past studies and literature reviews.
Survey was carried out on ISO 14001 certified companies to examine
continual improvement by implementing the ISO 14001 standard.
The study found that there is a significant and positive relationship
between Lean Principles: value, value stream, flow, pull and
perfection with the ISO 14001 requirements. LEMIS is significant to
support the continuous improvement and sustainability. The
integration system can be implemented to any manufacturing
company. It gives awareness on the importance on why organizations
need to sustain its environmental management system. In the
meantime, the lean principle can be adapted in order to streamline
daily activities of the company. Throughout the study, it had proven
that there is no sacrifice or trade-off between lean principles with ISO
14001 requirements. The framework developed in the study can be
further simplified in the future, especially the method of crossing
each sub requirements of ISO 14001 standard with the core elements
of Lean principles in this study.
Abstract: Violet Sr–Al–O:Eu2+ phosphor particles were
synthesized from a metal–ethylenediaminetetraacetic acid (EDTA)
solution of Sr, Al, Eu, and particulate alumina via spray drying and
sintering in a reducing atmosphere. The crystal structures and emission
properties at 85–300 K were investigated. The composition of the
violet Sr–Al–O:Eu2+ phosphor particles was determined from various
Sr–Al–O:Eu2+ phosphors by their emission properties’ dependence
on temperature. The highly crystalline SrAl12O19:Eu2+ emission phases
were confirmed by their crystallite sizes and the activation energies for
the 4f5d–8S7/2 transition of the Eu2+ ion. These results showed that the
material identification for the violet Sr–Al–O:Eu2+ phosphor was
accomplished by the low-temperature luminescence measurements.
Abstract: Powder metallurgy (P/M) is the only economic way to
produce porous parts/products. P/M can produce near net shape parts
hence reduces wastage of raw material and energy, avoids various
machining operations. The most vital use of P/M is in production of
metallic filters and self lubricating bush bearings and siding surfaces.
The porosity of the part can be controlled by varying compaction
pressure, sintering temperature and composition of metal powder
mix. The present work is aimed for experimental analysis of friction
and wear properties of self lubricating copper and tin bush bearing.
Experimental results confirm that wear rate of sintered component
is lesser for components having 10% tin by weight percentage. Wear
rate increases for high tin percentage (experimented for 20% tin and
30% tin) at same sintering temperature. Experimental results also
confirms that wear rate of sintered component is also dependent on
sintering temperature, soaking period, composition of the preform,
compacting pressure, powder particle shape and size.
Interfacial friction between die and punch, between inter powder
particles, between die face and powder particle depends on
compaction pressure, powder particle size and shape, size and shape
of component which decides size & shape of die & punch, material of
die & punch and material of powder particles.
Abstract: The purpose of this work is examining the multiproduct
multi-stage in a battery production line. To improve the
performances of an assembly production line by determine the
efficiency of each workstation. Data collected from every
workstation. The data are throughput rate, number of operator, and
number of parts that arrive and leaves during part processing. Data
for the number of parts that arrives and leaves are collected at least at
the amount of ten samples to make the data is possible to be analyzed
by Chi-Squared Goodness Test and queuing theory. Measures of this
model served as the comparison with the standard data available in
the company. Validation of the task time value resulted by comparing
it with the task time value based on the company database. Some
performance factors for the multi-product multi-stage in a battery
production line in this work are shown.
The efficiency in each workstation was also shown. Total
production time to produce each part can be determined by adding
the total task time in each workstation. To reduce the queuing time
and increase the efficiency based on the analysis any probably
improvement should be done. One probably action is by increasing
the number of operators how manually operate this workstation.
Abstract: Frequency stability of microgrids under islanded
operation attracts particular attention recently. A new cooperative
frequency control strategy based on centralized multi-agent system
(CMAS) is proposed in this study. Based on this strategy, agents sent
data and furthermore each component has its own to center operating
decisions (MGCC).After deciding on the information, they are
returned. Frequency control strategies include primary and secondary
frequency control and disposal of multi-stage load in which this study
will also provide a method and algorithm for load shedding. This
could also be a big problem for the performance of micro-grid in
times of disaster. The simulation results show the promising
performance of the proposed structure of the controller based on
multi agent systems.
Abstract: In this work, a Multi-Level Artificial Bee Colony
(called MLABC) for optimizing numerical test functions is presented.
In MLABC, two species are used. The first species employs n
colonies where each of them optimizes the complete solution vector.
The cooperation between these colonies is carried out by exchanging
information through a leader colony, which contains a set of elite
bees. The second species uses a cooperative approach in which the
complete solution vector is divided to k sub-vectors, and each of
these sub-vectors is optimized by a colony. The cooperation between
these colonies is carried out by compiling sub-vectors into the
complete solution vector. Finally, the cooperation between two
species is obtained by exchanging information. The proposed
algorithm is tested on a set of well-known test functions. The results
show that MLABC algorithm provides efficiency and robustness to
solve numerical functions.
Abstract: The use of mobile phones is growing tremendously all
over the world. In Tanzania there are a number of operators licensed
by Tanzania Communications Regulatory Authority (TCRA) aiming
at attracting customers into their networks. So far
telecommunications market competition has been very stiff. Various
measures are being taken by mobile operators to survive in the
market. Such measure include introducing of different air time
bundles on daily, weekly and monthly at lower tariffs. Other
measures include the introduction of normal tariff, tourist package
and one network. Despite of all these strategies, there is a dynamic
competition in the market which needs to be explored. Some
influences which attract customers to choose a certain mobile
operator are of particular interest. This paper is investigating if the
network effects and Quality of Services (QoS) influence mobile
customers in selection of their mobile network operators. Seventy
seven students from high learning institutions in Dodoma
Municipality in Tanzania participated in responding to prepared
questionnaires. The data was analyzed using Statistical Package for
Social Science (SPSS) Software. The results indicate that, network
coverage does influence customers in selection of mobile operators.
In addition, this paper proposes further research in some areas
especially where the study came up with different findings from what
the theory has in place.
Abstract: Dissimilar joining of Titanium and Aluminum thin
sheets has potential applications in aerospace and automobile
industry which can reduce weight and cost and improve strength,
corrosion resistance and high temperature properties. However
successful welding of Titanium/Aluminium sheets is of challenge due
to differences in physical, chemical and metallurgical properties
between the two. This paper describes research results of Laser Beam
Welding (LBW) of Ti/Al thin sheets in which many researchers have
recently performed and critically reviewed from different
perspectives. Also some of notable works in the field of laser welding
with changes in mechanical properties, crack propagation, diffusion
behavior, chemical potential, interfacial reaction and the
microstructure are reported.
Abstract: Laser beam welding for the dissimilar Titanium and
Aluminium thin sheets is an emerging area which is having wider
applications in aerospace, aircraft, automotive, electronics and in
other industries due to its high speed, non-contact, precision with low
heat effects, least welding distortion, low labor costs and convenient
operation. Laser beam welding of dissimilar metal combinations are
increasingly demanded due to high energy densities with small fusion
and heat affected zones. Furthermore, no filler or electrode material is
required and contamination of weld is also very small. The present
study is to reviews the influence of different parameters like laser
power, welding speed, power density, beam diameter, focusing
distance and type of shielding gas on the mechanical properties of
dissimilar metal combinations like SS/Al, Cu/Al and Ti/Al focusing
on aluminum to other materials. Research findings reveal that Ti/Al
combination gives better metallurgical and mechanical properties
than other combinations such as SS/Al and Cu/Al.
Abstract: Wireless sensor network is vulnerable to a wide range
of attacks. Recover secrecy after compromise, to develop technique
that can detect intrusions and able to resilient networks that isolates
the point(s) of intrusion while maintaining network connectivity for
other legitimate users. To define new security metrics to evaluate
collaborative intrusion resilience protocol, by leveraging the sensor
mobility that allows compromised sensors to recover secure state
after compromise. This is obtained with very low overhead and in a
fully distributed fashion using extensive simulations support our
findings.
Abstract: In today’s era, it is no news that organizations should
demonstrate honest conduct as well as ethical administration.
Therefore, the concept of corporate social responsibility
(subsequently CSR) has created its tag upon the company’s focal
point as well as marketing communications, and will continue in the
future. The importance of CSR has increased in the last decade, and
this concept has attracted global attention. The notion of CSR has
strategic significance for many organizations. However, businesses
are not adapting the activities of CSR that benefit to all of its
stakeholders (including society). The main reason is the practitioners
are unfortunately unable to comprehend its importance; and
therefore, the activities of the CSR are so detached from the business
activities. Hence, it is required to develop an understanding that the
activities of CSR are not only beneficial for the society but it also
benefit to business. This paper focuses on the concept of strategic
CSR, and develops a theoretical framework that will help
practitioners to filter and chose the activities of CSR that are strategic
in nature.
Abstract: We have experimentally demonstrated bright-dark
pulses in a nonlinear polarization rotation (NPR) based mode-locked
Erbium-doped fiber laser (EDFL) with a long cavity configuration.
Bright–dark pulses could be achieved when the laser works in the
passively mode-locking regime and the net group velocity dispersion
is quite anomalous. The EDFL starts to generate a bright pulse train
with degenerated dark pulse at the mode-locking threshold pump
power of 35.09 mW by manipulating the polarization states of the
laser oscillation modes using a polarization controller (PC). A split
bright–dark pulse is generated when further increasing the pump
power up to 37.95 mW. Stable bright pulses with no obvious
evidence of a dark pulse can also be generated when further adjusting
PC and increasing the pump power up to 52.19 mW. At higher pump
power of 54.96 mW, a new form of bright-dark pulse emission was
successfully identified with the repetition rate of 29 kHz. The bright
and dark pulses have a duration of 795.5 ns and 640 ns, respectively.
Abstract: Domestic goats (Capra hircus) are extremely diverse
species and principal animal genetic resource of the developing
world. These facilitate a persistent supply of meat, milk, fibre, and
skin and are considered as important revenue generators in small
pastoral environments. This study aimed to fingerprint β-LG gene at
PCR-RFLP level in native Saudi goat breeds (Ardi, Habsi and Harri)
in an attempt to have a preliminary image of β-LG genotypic patterns
in Saudi breeds as compared to other foreign breeds such as Indian
and Egyptian. Also, the Phylogenetic analysis was done to investigate
evolutionary trends and similarities among the caprine β-LG gene
with that of the other domestic specie, viz. cow, buffalo and sheep.
Blood samples were collected from 300 animals (100 for each breed)
and genomic DNA was extracted. A fragment of the β-LG gene
(427bp) was amplified using specific primers. Subsequent digestion
with Sac II restriction endonuclease revealed two alleles (A and B)
and three different banding patterns or genotypes i.e. AA, AB and
BB. The statistical analysis showed a general trend that β-LG AA
genotype had higher milk yield than β-LG AB and β-LG BB
genotypes. Nucleotide sequencing of the selected β-LG fragments
was done and submitted to GenBank NCBI (Accession No.
KJ544248, KJ588275, KJ588276, KJ783455, KJ783456 and
KJ874959). Phylogenetic analysis on the basis of nucleotide
sequences of native Saudi goats indicated evolutional similarity with
the GenBank reference sequences of goat, Bubalus bubalis and Bos
taurus. However, the origin of sheep which is the most closely
related from the evolutionary point of view, was located some
distance away.