Abstract: Clustering techniques have received attention in many areas including engineering, medicine, biology and data mining. The purpose of clustering is to group together data points, which are close to one another. The K-means algorithm is one of the most widely used techniques for clustering. However, K-means has two shortcomings: dependency on the initial state and convergence to local optima and global solutions of large problems cannot found with reasonable amount of computation effort. In order to overcome local optima problem lots of studies done in clustering. This paper is presented an efficient hybrid evolutionary optimization algorithm based on combining Particle Swarm Optimization (PSO) and Ant Colony Optimization (ACO), called PSO-ACO, for optimally clustering N object into K clusters. The new PSO-ACO algorithm is tested on several data sets, and its performance is compared with those of ACO, PSO and K-means clustering. The simulation results show that the proposed evolutionary optimization algorithm is robust and suitable for handing data clustering.
Abstract: New advancement of technology and never satisfying demands of the civilization are putting huge pressure on the natural fuel resources and these resources are at a constant threat to its sustainability. To get the best out of the automobile, the optimum balance between performance and fuel economy is important. In the present state of art, either of the above two aspects are taken into mind while designing and development process which puts the other in the loss as increase in fuel economy leads to decrement in performance and vice-versa. In-depth observation of the vehicle dynamics apparently shows that large amount of energy is lost during braking and likewise large amount of fuel is consumed to reclaim the initial state, this leads to lower fuel efficiency to gain the same performance. Current use of Kinetic Energy Recovery System is only limited to sports vehicles only because of the higher cost of this system. They are also temporary in nature as power can be squeezed only during a small time duration and use of superior parts leads to high cost, which results on concentration on performance only and neglecting the fuel economy. In this paper Kinetic Energy Recovery System for storing the power and then using the same while accelerating has been discussed. The major storing element in this system is a Flat Spiral Spring that will store energy by compression and torsion.
The use of spring ensure the permanent storage of energy until used by the driver unlike present mechanical regeneration system in which the energy stored decreases with time and is eventually lost. A combination of internal gears and spur gears will be used in order to make the energy release uniform which will lead to safe usage. The system can be used to improve the fuel efficiency by assisting in overcoming the vehicle’s inertia after braking or to provide instant acceleration whenever required by the driver. The performance characteristics of the system including response time, mechanical efficiency and overall increase in efficiency are demonstrated. This technology makes the KERS (Kinetic Energy Recovery System) more flexible and economical allowing specific application while at the same time increasing the time frame and ease of usage.
Abstract: Curing of paints by exposure to UV radiations is
emerging as one of the best film forming technique as an alternative
to traditional solvent borne oxidative and thermal curing coatings.
The composition and chemistry of UV curable coatings and role of
multifunctional and monofunctional monomers, oligomers, and
photoinitiators have been discussed. The limitations imposed by
thermodynamic equilibrium and tendency for acrylic double bond
polymerizations during synthesis of multifunctional acrylates have
been presented. Aim of present investigation was thus to explore the
reaction variables associated with synthesis of multifunctional
acrylates. Zirconium oxychloride was evaluated as catalyst against
regular acid functional catalyst. The catalyzed synthesis of glyceryl
acrylate and neopentyl glycol acrylate was conducted by variation of
following reaction parameters: two different reactant molar ratios-
1:4 and 1:6; catalyst usage in % by moles on polyol- 2.5, 5.0 and 7.5
and two different reaction temperatures- 45 and 75 0C. The reaction
was monitored by determination of acid value and hydroxy value at
regular intervals, besides TLC, HPLC, and FTIR analysis of
intermediates and products. On the basis of determination of reaction
progress over 1-60 hrs, the esterification reaction was observed to
follow 2nd order kinetics with rate constant varying from 1*10-4 to
7*10-4. The thermal and catalytic components of second order rate
constant and energy of activation were also determined. Uses of
these kinetic and thermodynamic parameters in design of reactor for
manufacture of multifunctional acrylate ester have been presented.
The synthesized multifunctional acrylates were used to formulate and
apply UV curable clear coat followed by determination of curing
characteristics and mechanical properties of cured film. The overall
curing rates less than 05 min. were easily attained indicating
economical viability of radiation curable system due to faster
production schedules
Abstract: The most suitable Semiconductor detector, Cadmium
Zinc Teloraid , has unique properties because of high Atomic number
and wide Brand Gap . It has been tried in this project with different
processes such as Lead , Diffusion , Produce and Recombination ,
effect of Trapping and injection carrier of CdZnTe , to get hole and
then present a complete answer of it . Then we should investigate the
movement of carrier ( Electron – Hole ) by using above answer.
Abstract: With the advent of emerging personal computing paradigms such as ubiquitous and mobile computing, Web contents are becoming accessible from a wide range of mobile devices. Since these devices do not have the same rendering capabilities, Web contents need to be adapted for transparent access from a variety of client agents. Such content adaptation results in better rendering and faster delivery to the client device. Nevertheless, Web content adaptation sets new challenges for semantic markup. This paper presents an advanced components platform, called MorfeoSMC, enabling the development of mobility applications and services according to a channel model based on Services Oriented Architecture (SOA) principles. It then goes on to describe the potential for integration with the Semantic Web through a novel framework of external semantic annotation of mobile Web contents. The role of semantic annotation in this framework is to describe the contents of individual documents themselves, assuring the preservation of the semantics during the process of adapting content rendering, as well as to exploit these semantic annotations in a novel user profile-aware content adaptation process. Semantic Web content adaptation is a way of adding value to and facilitates repurposing of Web contents (enhanced browsing, Web Services location and access, etc).
Abstract: In this work we report on preliminary analysis of a novel optoelectronic gas sensor based on an optical fiber integrated with a tetrakis(4-sulfonatophenyl)porphyrin (TPPS) thin film. The sensitive materials are selectively deposited on the core region of a fiber tip by UV light induced deposition technique. A simple and cheap process which can be easily extended to different porphyrin derivatives. When the TPPS film on the fiber tip is exposed to acid and/or base vapors, dramatic changes occur in the aggregation structure of the dye molecules in the film, from J- to H-type, resulting in a profound modification of their corresponding reflectance spectra. From the achieved experimental results it is evident that the presence of intense and narrow band peaks in the reflected spectra could be monitored to detect hazardous vapors.
Abstract: Computer-mediated communication technologies which provide for virtual communities have typically evolved in a cross-dichotomous manner, such that technical constructs of the technology have evolved independently from the social environment of the community. The present paper analyses some limitations of current implementations of computer-mediated communication technology that are implied by such a dichotomy, and discusses their inhibiting effects on possible developments of virtual communities. A Socio-Technical Indicator Model is introduced that utilizes integrated feedback to describe, simulate and operationalise increasing representativeness within a variety of structurally and parametrically diverse systems. In illustration, applications of the model are briefly described for financial markets and for eco-systems. A detailed application is then provided to resolve the aforementioned technical limitations of moderation on the evolution of virtual communities. The application parameterises virtual communities to function as self-transforming social-technical systems which are sensitive to emergent and shifting community values as products of on-going communications within the collective.
Abstract: Software reuse can be considered as the most realistic
and promising way to improve software engineering productivity and
quality. Automated assistance for software reuse involves the
representation, classification, retrieval and adaptation of components.
The representation and retrieval of components are important to
software reuse in Component-Based on Software Development
(CBSD). However, current industrial component models mainly focus
on the implement techniques and ignore the semantic information
about component, so it is difficult to retrieve the components that
satisfy user-s requirements. This paper presents a method of business
component retrieval based on specification matching to solve the
software reuse of enterprise information system. First, a business
component model oriented reuse is proposed. In our model, the
business data type is represented as sign data type based on XML,
which can express the variable business data type that can describe the
variety of business operations. Based on this model, we propose
specification match relationships in two levels: business operation
level and business component level. In business operation level, we
use input business data types, output business data types and the
taxonomy of business operations evaluate the similarity between
business operations. In the business component level, we propose five
specification matches between business components. To retrieval
reusable business components, we propose the measure of similarity
degrees to calculate the similarities between business components.
Finally, a business component retrieval command like SQL is
proposed to help user to retrieve approximate business components
from component repository.
Abstract: This research seeks to investigate the frequency and
profitability of index arbitrage opportunities involving the SET50
futures, SET50 component stocks, and the ThaiDEX SET50 ETF
(ticker symbol: TDEX). In particular, the frequency and profit of
arbitrage are measured in the following three arbitrage tests: (1)
SET50 futures vs. ThaiDEX SET50 ETF, (2) SET50 futures vs.
SET50 component stocks, and (3) ThaiDEX SET50 ETF vs. SET50
component stocks are investigated. For tests (2) and (3), the problems
involve conic optimization and quadratic programming as subproblems.
This research is first to apply conic optimization and
quadratic programming techniques in the context of index arbitrage
and is first to investigate such index arbitrage in the Thai equity and
derivatives markets. Thus, the contribution of this study is twofold.
First, its results would help understand the contribution of the
derivatives securities to the efficiency of the Thai markets. Second,
the methodology employed in this study can be applied to other
geographical markets, with minor adjustments.
Abstract: This paper discusses site selection process for
biological soil conservation planning. It was supported by a valuefocused
approach and spatial multi-criteria evaluation techniques. A
first set of spatial criteria was used to design a number of potential
sites. Next, a new set of spatial and non-spatial criteria was
employed, including the natural factors and the financial costs,
together with the degree of suitability for the Bonkuh watershed to
biological soil conservation planning and to recommend the most
acceptable program. The whole process was facilitated by a new
software tool that supports spatial multiple criteria evaluation, or
SMCE in GIS software (ILWIS). The application of this tool,
combined with a continual feedback by the public attentions, has
provided an effective methodology to solve complex decisional
problem in biological soil conservation planning.
Abstract: Reversible logic is becoming more and more prominent
as the technology sets higher demands on heat, power, scaling
and stability. Reversible gates are able at any time to "undo" the
current step or function. Multiple-valued logic has the advantage of
transporting and evaluating higher bits each clock cycle than binary.
Moreover, we demonstrate in this paper, combining these disciplines
we can construct powerful multiple-valued reversible logic structures.
In this paper a reversible block implemented by pseudo floatinggate
can perform AD-function and a DA-function as its reverse
application.
Abstract: An alternative approach to the use of Discrete Fourier
Transform (DFT) for Magnetic Resonance Imaging (MRI) reconstruction
is the use of parametric modeling technique. This method
is suitable for problems in which the image can be modeled by
explicit known source functions with a few adjustable parameters.
Despite the success reported in the use of modeling technique as an
alternative MRI reconstruction technique, two important problems
constitutes challenges to the applicability of this method, these are
estimation of Model order and model coefficient determination. In
this paper, five of the suggested method of evaluating the model
order have been evaluated, these are: The Final Prediction Error
(FPE), Akaike Information Criterion (AIC), Residual Variance (RV),
Minimum Description Length (MDL) and Hannan and Quinn (HNQ)
criterion. These criteria were evaluated on MRI data sets based on the
method of Transient Error Reconstruction Algorithm (TERA). The
result for each criterion is compared to result obtained by the use of a
fixed order technique and three measures of similarity were evaluated.
Result obtained shows that the use of MDL gives the highest measure
of similarity to that use by a fixed order technique.
Abstract: In the last years numerous applications of Human-
Computer Interaction have exploited the capabilities of Time-of-
Flight cameras for achieving more and more comfortable and precise
interactions. In particular, gesture recognition is one of the most active
fields. This work presents a new method for interacting with a virtual
object in a 3D space. Our approach is based on the fusion of depth
data, supplied by a ToF camera, with color information, supplied
by a HD webcam. The hand detection procedure does not require
any learning phase and is able to concurrently manage gestures of
two hands. The system is robust to the presence in the scene of
other objects or people, thanks to the use of the Kalman filter for
maintaining the tracking of the hands.
Abstract: The paper is included within the framework of a
complex research program, which was initiated from the hypothesis
arguing on the existence of a correlation between pineal indolic and
peptide hormones and the somatic development rhythm, including
thus the epithalamium-epiphysis complex involvement. At birds,
pineal gland contains a circadian oscillator, playing a main role in the
temporal organization of the cerebral functions. The secretion of
pineal indolic hormones is characterized by a high endogenous
rhythmic alternation, modulated by the light/darkness (L/D)
succession and by temperature as well. The research has been carried
out using 100 chicken broilers - “Ross" commercial hybrid,
randomly allocated in two experimental batches: Lc batch, reared
under a 12L/12D lighting schedule and Lexp batch, which was photic
pinealectomised through continuous exposition to light (150 lux, 24
hours, 56 days). Chemical and physical features of the meat issued
from breast fillet and thighs muscles have been studied, determining
the dry matter, proteins, fat, collagen, salt content and pH value, as
well. Besides the variations of meat chemical composition in relation
with lighting schedule, other parameters have been studied: live
weight dynamics, feed intake and somatic development degree. The
achieved results became significant since chickens have 7 days of
age, some variations of the studied parameters being registered,
revealing that the pineal gland physiologic activity, in relation with
the lighting schedule, could be interpreted through the monitoring of
the somatic development technological parameters, usually studied
within the chicken broilers rearing aviculture practice.
Abstract: In this paper we present an energy efficient match-line
(ML) sensing scheme for high-speed ternary content-addressable
memory (TCAM). The proposed scheme isolates the sensing unit of
the sense amplifier from the large and variable ML capacitance. It
employs feedback in the sense amplifier to successfully detect a
match while keeping the ML voltage swing low. This reduced voltage
swing results in large energy saving. Simulation performed using
130nm 1.2V CMOS logic shows at least 30% total energy saving in
our scheme compared to popular current race (CR) scheme for
similar search speed. In terms of speed, dynamic energy, peak power
consumption and transistor count our scheme also shows better
performance than mismatch-dependant (MD) power allocation
technique which also employs feedback in the sense amplifier.
Additionally, the implementation of our scheme is simpler than CR
or MD scheme because of absence of analog control voltage and
programmable delay circuit as have been used in those schemes.
Abstract: An HPLC-UV analytical method was developed to
determine ethylenediaminetetraacetic acid (EDTA) in dairy
wastewater and surface water. The optimizing separation was achieved
by reversed–phase ion-pair liquid chromatography on a C18 column
using methanol as mobile phase solvent, tetrabutylammonium bromide
as the ion-pair reagent in pH 3.3 formate buffer solution at a flow rate
of 0.9 mL min-1 with a UV detector at 265 nm. No interference of Ca,
Mg or NO3
- was detected. Method performance was evaluated in terms
of linearity, repeatability and reproducibility. The method detection
limit was 5 μg L-1. The contents of EDTA in dairy effluents were 72 ~
261 μg L-1 at a large dairy site. A change of EDTA concentration was
observed downstream of the dairy effluent discharge, but this was well
under the predicted no effect concentration for aquatic ecosystem.
Abstract: Network on a chip (NoC) has been proposed as a viable solution to counter the inefficiency of buses in the current VLSI on-chip interconnects. However, as the silicon chip accommodates more transistors, the probability of transient faults is increasing, making fault tolerance a key concern in scaling chips. In packet based communication on a chip, transient failures can corrupt the data packet and hence, undermine the accuracy of data communication. In this paper, we present a comparative analysis of transient fault tolerant techniques including end-to-end, node-by-node, and stochastic communication based on flooding principle.
Abstract: The adaptive backstepping controller for inverted pendulum is designed by using the general motion control model. Backstepping is a novel nonlinear control technique based on the Lyapunov design approach, used when higher derivatives of parameter estimation appear. For easy parameter adaptation, the mathematical model of the inverted pendulum converted into the motion control model. This conversion is performed by taking functions of unknown parameters and dynamics of the system. By using motion control model equations, inverted pendulum is simulated without any information about not only parameters but also measurable dynamics. Also these results are compare with the adaptive backstepping controller which extended with integral action that given from [1].
Abstract: Aiming the application of localized hyperthermia, a
magnetic induction system with new approaches is proposed. The techniques in this system for improving the effectiveness of localized hyperthermia are that using magnetic circuit and the multiple-coil array instead of a giant coil for generating magnetic field. Specially, amorphous metal is adopted as the material of magnetic circuit. Detail
design parameters of hardware are well described. Simulation tool is
employed for this work and experiment result is reported as well.
Abstract: This paper presents a general trainable framework
for fast and robust upright human face and non-human object
detection and verification in static images. To enhance the
performance of the detection process, the technique we develop is
based on the combination of fast neural network (FNN) and
classical neural network (CNN). In FNN, a useful correlation is
exploited to sustain high level of detection accuracy between input
image and the weight of the hidden neurons. This is to enable the
use of Fourier transform that significantly speed up the time
detection. The combination of CNN is responsible to verify the
face region. A bootstrap algorithm is used to collect non human
object, which adds the false detection to the training process of the
human and non-human object. Experimental results on test images
with both simple and complex background demonstrate that the
proposed method has obtained high detection rate and low false
positive rate in detecting both human face and non-human object.