Abstract: In developing countries, one of the most important
restrictions about the economic growth is the lack of national savings
which are supposed to finance the investments. In order to overcome
this restriction and achieve the higher rate of economic growth by
increasing the level of output, countries choose the external
borrowing. However, there is a dispute in the literature over the
correlation between external debt and economic growth. The aim of
this study is to examine the effects of external debt on Turkish
economic growth by using VAR analysis with the quarterly data over
the period of 2002:01-2014:04. In this respect, Johansen
Cointegration Test, Impulse- Response Function and Variance
Decomposition Tests will be used for analyses. Empirical findings
show that there is no cointegration in the long run.
Abstract: The MEMS pressure sensor has been introduced and
presented in this paper. The types of pressure sensor and its theory of
operation are also included. The latest MEMS technology, the
fabrication processes of pressure sensor are explored and discussed.
Besides, various device applications of pressure sensor such as tire
pressure-monitoring system, diesel particulate filter and others are
explained. Due to further miniaturization of the device nowadays, the
pressure sensor with nanotechnology (NEMS) is also reviewed. The
NEMS pressure sensor is expected to have better performance as well
as lower in its cost. It has gained an excellent popularity in many
applications.
Abstract: This paper shows the general perceptions of Spanish
university stakeholders in relation to the university’s annual reports
and the adequacy and potential of intellectual capital reporting. To
this end, a questionnaire was designed and sent to every member of
the Social Councils of Spanish public universities. It was thought that
these participants would provide a good example of the attitude of
university stakeholders since they represent the different social
groups connected with universities. From the results of this study we
are in the position of confirming the need for universities to offer
information on intellectual capital in their accounting information
model.
Abstract: Multiple User Interference (MUI) considers the
primary problem in Optical Code-Division Multiple Access
(OCDMA), which resulting from the overlapping among the users. In
this article we aim to mitigate this problem by studying an
interference cancellation scheme called successive interference
cancellation (SIC) scheme. This scheme will be tested on two
different detection schemes, spectral amplitude coding (SAC) and
direct detection systems (DS), using partial modified prime (PMP) as
the signature codes. It was found that SIC scheme based on both SAC
and DS methods had a potential to suppress the intensity noise, that is
to say it can mitigate MUI noise. Furthermore, SIC/DS scheme
showed much lower bit error rate (BER) performance relative to
SIC/SAC scheme for different magnitude of effective power. Hence,
many more users can be supported by SIC/DS receiver system.
Abstract: Nowadays, technological progress is one of the most
important components of economic growth and the efficiency of
R&D activities is particularly essential for countries. This study is an
attempt to analyze the R&D efficiencies of EU countries. The
indicators related to R&D efficiencies should be determined in
advance in order to use DEA. For this reason a list of input and
output indicators are derived from the literature review. Considering
the data availability, a final list is given for the numerical analysis for
future research.
Abstract: This study compares the intensity of game load among
player positions and between the 1st and the 2nd half of the games.
Two guards, three forwards, and three centers (female basketball
players) participated in this study. The heart rate (HR) and its
development were monitored during two competitive games.
Statistically insignificant differences in the intensity of game load
were recorded between guards, forwards, and centers below and
above 85% of the maximal heart rate (HRmax) and in the mean HR as
% of HRmax (87.81±3.79%, 87.02±4.37%, and 88.76±3.54%,
respectively). Moreover, when the 1st and the 2nd half of the games
were compared in the mean HR (87.89±4.18% vs. 88.14±3.63% of
HRmax), no statistical significance was recorded. This information can
be useful for coaching staff, to manage and to precisely plan the
training process.
Abstract: In recent years, fire accidents have been steadily
increased and the amount of property damage caused by the accidents
has gradually raised. Damaging building structure, fire incidents bring
about not only such property damage but also strength degradation and
member deformation. As a result, the building structure undermines its
structural ability. Examining the degradation and the deformation is
very important because reusing the building is more economical than
reconstruction. Therefore, engineers need to investigate the strength
degradation and member deformation well, and make sure that they
apply right rehabilitation methods. This study aims at evaluating
deformation characteristics of fire damaged and rehabilitated normal
strength concrete beams through both experiments and finite element
analyses. For the experiments, control beams, fire damaged beams and
rehabilitated beams are tested to examine deformation characteristics.
Ten test beam specimens with compressive strength of 21MPa are
fabricated and main test variables are selected as cover thickness of
40mm and 50mm and fire exposure time of 1 hour or 2 hours. After
heating, fire damaged beams are air-recurred for 2 months and
rehabilitated beams are repaired with polymeric cement mortar after
being removed the fire damaged concrete cover. All beam specimens
are tested under four points loading. FE analyses are executed to
investigate the effects of main parameters applied to experimental
study. Test results show that both maximum load and stiffness of the
rehabilitated beams are higher than those of the fire damaged beams.
In addition, predicted structural behaviors from the analyses also show
good rehabilitation effect and the predicted load-deflection curves are
similar to the experimental results. For the further, the proposed
analytical method can be used to predict deformation characteristics of
fire damaged and rehabilitated concrete beams without suffering from
time and cost consuming of experimental process.
Abstract: Sound processing is one the subjects that newly
attracts a lot of researchers. It is efficient and usually less expensive
than other methods. In this paper the flow generated sound is used to
estimate the flow speed of free flows. Many sound samples are
gathered. After analyzing the data, a parameter named wave power is
chosen. For all samples the wave power is calculated and averaged
for each flow speed. A curve is fitted to the averaged data and a
correlation between the wave power and flow speed is found. Test
data are used to validate the method and errors for all test data were
under 10 percent. The speed of the flow can be estimated by
calculating the wave power of the flow generated sound and using the
proposed correlation.
Abstract: In this paper, we consider some integrable Heisenberg
Ferromagnet Equations with self-consistent potentials. We study
their Lax representations. In particular we derive their equivalent
counterparts in the form of nonlinear Schr¨odinger type equations.
We present the integrable reductions of the Heisenberg Ferromagnet
Equations with self-consistent potentials. These integrable Heisenberg
Ferromagnet Equations with self-consistent potentials describe
nonlinear waves in ferromagnets with some additional physical fields.
Abstract: Transparent nickel doped cobalt sulfide was fabricated
on a SnO2:F electrode and tested as an efficient electrocatalyst and as
an alternative to the expensive platinum counter electrode. In order to
investigate how this electrode could affect the electrical
characteristics of a dye-sensitized solar cell, we manufactured cells
with the same TiO2 photoanode sensitized with dye (N719) and
employing the same quasi-solid electrolyte, altering only the counter
electrode used. The cells were electrically and electrochemically
characterized and it was observed that the ones with the Ni doped
CoS2 outperformed the efficiency of the cells with the Pt counter
electrode (3.76% and 3.44% respectively). Particularly, the higher
efficiency of the cells with the Ni doped CoS2 counter electrode (CE)
is mainly because of the enhanced photocurrent density which is
attributed to the enhanced electrocatalytic ability of the CE and the
low charge transfer resistance at the CE/electrolyte interface.
Abstract: This contribution presents a friction estimator for
industrial purposes which identifies Coulomb friction in a steering
system. The estimator only needs a few, usually known, steering
system parameters. Friction occurs on almost every mechanical
system and has a negative influence on high-precision position
control. This is demonstrated on a steering angle controller for highly
automated driving. In this steering system the friction induces limit
cycles which cause oscillating vehicle movement when the vehicle
follows a given reference trajectory. When compensating the friction
with the introduced estimator, limit cycles can be suppressed. This
is demonstrated by measurements in a series vehicle.
Abstract: Taiwanese composer Kuo Chih-Yuan (1921-2013)
studied composition at Tokyo University of the Arts and was
influenced by the musical nationalism prevailing in Japan at the time.
Determined to create world-class contemporary works to represent
Taiwan, he created music with elements of traditional Taiwanese
music in ways that had not been done before. The aims of this study
were to examine the traditional elements used in Kuo Chih-Yuan’s
Variations and Fugue on an Ancient Taiwanese Music (1972), and
how an understanding of these elements might guide pianists to
interpret a more proper performance of his work was also presented
in this study.
Abstract: The design of high pressure water jet based polishing
equipment and its fabrication conducted in this study is reported
herein, together with some preliminary test results for assessing its
applicability for HMA surface polishing. This study also provides
preliminary findings concerning the test variables, such as the
rotational speed, the water jet pressure, the abrasive agent used, and
the impact angel that were experimentally investigated in this study. The preliminary findings based on four trial tests (two on large
slab specimens and two on small size gyratory compacted
specimens), however, indicate that both friction and texture values
tend to increase with the polishing durations for two combinations of
pressure and rotation speed of the rotary deck. It seems that the more
polishing action the specimen is subjected to; the aggregate edges are
created such that the surface texture values are increased with the
accompanied increase in friction values. It may be of interest (but
which is outside the scope of this study) to investigate if the similar
trend exist for HMA prepared with aggregate source that is sand and
gravel.
Abstract: Human beings have the ability to make logical
decisions. Although human decision - making is often optimal, it is
insufficient when huge amount of data is to be classified. Medical
dataset is a vital ingredient used in predicting patient’s health
condition. In other to have the best prediction, there calls for most
suitable machine learning algorithms. This work compared the
performance of Artificial Neural Network (ANN) and Decision Tree
Algorithms (DTA) as regards to some performance metrics using
diabetes data. WEKA software was used for the implementation of
the algorithms. Multilayer Perceptron (MLP) and Radial Basis
Function (RBF) were the two algorithms used for ANN, while
RegTree and LADTree algorithms were the DTA models used. From
the results obtained, DTA performed better than ANN. The Root
Mean Squared Error (RMSE) of MLP is 0.3913 that of RBF is
0.3625, that of RepTree is 0.3174 and that of LADTree is 0.3206
respectively.
Abstract: The quantitative study of cell mechanics is of
paramount interest, since it regulates the behaviour of the living cells
in response to the myriad of extracellular and intracellular
mechanical stimuli. The novel experimental techniques together with
robust computational approaches have given rise to new theories and
models, which describe cell mechanics as combination of
biomechanical and biochemical processes. This review paper
encapsulates the existing continuum-based computational approaches
that have been developed for interpreting the mechanical responses of
living cells under different loading and boundary conditions. The
salient features and drawbacks of each model are discussed from both
structural and biological points of view. This discussion can
contribute to the development of even more precise and realistic
computational models of cell mechanics based on continuum
approaches or on their combination with microstructural approaches,
which in turn may provide a better understanding of
mechanotransduction in living cells.
Abstract: In recent years, honeycomb fiber reinforced plastic
(FRP) sandwich panels have been increasingly used in various
industries. Low weight, low price and high mechanical strength are
the benefits of these structures. However, their mechanical properties
and behavior have not been fully explored. The objective of this
study is to conduct a combined numerical-statistical investigation of
honeycomb FRP sandwich beams subject to torsion load. In this
paper, the effect of geometric parameters of sandwich panel on
maximum shear strain in both face and core and angle of torsion in a
honeycomb FRP sandwich structures in torsion is investigated. The
effect of Parameters including core thickness, face skin thickness,
cell shape, cell size, and cell thickness on mechanical behavior of the
structure were numerically investigated. Main effects of factors were
considered in this paper and regression equations were derived.
Taguchi method was employed as experimental design and an
optimum parameter combination for the maximum structure stiffness
has been obtained. The results showed that cell size and face skin
thickness have the most significant impacts on torsion angle,
maximum shear strain in face and core.
Abstract: The purpose of this study is to evaluate the English
version and a Malay translation of the 21-item Learner Awareness
Questionnaire for its application to assess student learning in higher
education. The Learner Awareness Questionnaire, originally written
in English, is a quantitative measure of how and why students learn.
The questionnaire gives an indication of the process and motives to
learn using four scales: survival, establishing stability, approval and
loving to learn. Data in the present study came from 680 university
students enrolled in various programmes in Malaysia. The Malay
version of the questionnaire supported a similar four factor structure
and internal consistency to the English version. The four factors of
the Malay version also showed moderate to strong correlations with
those of the English versions. The results suggest that the Malay
version of the questionnaire is similar to the English version.
However, further refinement to the questions is needed to strengthen
the correlations between the two questionnaires.
Abstract: DNA Barcode provides good sources of needed
information to classify living species. The classification problem has
to be supported with reliable methods and algorithms. To analyze
species regions or entire genomes, it becomes necessary to use the
similarity sequence methods. A large set of sequences can be
simultaneously compared using Multiple Sequence Alignment which
is known to be NP-complete. However, all the used methods are still
computationally very expensive and require significant computational
infrastructure. Our goal is to build predictive models that are highly
accurate and interpretable. In fact, our method permits to avoid the
complex problem of form and structure in different classes of
organisms. The empirical data and their classification performances
are compared with other methods. Evenly, in this study, we present
our system which is consisted of three phases. The first one, is called
transformation, is composed of three sub steps; Electron-Ion
Interaction Pseudopotential (EIIP) for the codification of DNA
Barcodes, Fourier Transform and Power Spectrum Signal Processing.
Moreover, the second phase step is an approximation; it is
empowered by the use of Multi Library Wavelet Neural Networks
(MLWNN). Finally, the third one, is called the classification of DNA
Barcodes, is realized by applying the algorithm of hierarchical
classification.
Abstract: This paper will seek to clarify important key terms
such as home schooling and home education as well as the legalities
attached to such terms. It will reflect on the recent proposed changes
to terminology in NSW, Australia. The various pedagogical
approaches to home education will be explored including their
prominence in the Australian context. There is a strong focus on
literature from Australia. The historical background of home
education in Australia will be explained as well as the difference
between distance education and home education. The future of home
education in Australia will be discussed.
Abstract: The lifetime of a wireless sensor network can be
effectively increased by using scheduling operations. Once the
sensors are randomly deployed, the task at hand is to find the largest
number of disjoint sets of sensors such that every sensor set provides
complete coverage of the target area. At any instant, only one of these
disjoint sets is switched on, while all other are switched off. This
paper proposes a heuristic search method to find the maximum
number of disjoint sets that completely cover the region. A
population of randomly initialized members is made to explore the
solution space. A set of heuristics has been applied to guide the
members to a possible solution in their neighborhood. The heuristics
escalate the convergence of the algorithm. The best solution explored
by the population is recorded and is continuously updated. The
proposed algorithm has been tested for applications which require
sensing of multiple target points, referred to as point coverage
applications. Results show that the proposed algorithm outclasses the
existing algorithms. It always finds the optimum solution, and that
too by making fewer number of fitness function evaluations than the
existing approaches.