Abstract: Transmission and distribution lines are vital links between the generating unit and consumers. They are exposed to atmosphere, hence chances of occurrence of fault in transmission line is very high which has to be immediately taken care of in order to minimize damage caused by it. In this paper Discrete wavelet transform of voltage signals at the two ends of transmission lines have been analyzed. The transient energy of the detail information of level five is calculated for different fault conditions. It is observed that the variation of transient energy of healthy and faulted line can give important information which can be very useful in classifying and locating the fault.
Abstract: This research work is concerned with the eigenvalue problem for the integral operators which are obtained by linearization of a nonlocal evolution equation. The purpose of section II.A is to describe the nature of the problem and the objective of the project. The problem is related to the “stable solution" of the evolution equation which is the so-called “instanton" that describe the interface between two stable phases. The analysis of the instanton and its asymptotic behavior are described in section II.C by imposing the Green function and making use of a probability kernel. As a result , a classical Theorem which is important for an instanton is proved. Section III devoted to a study of the integral operators related to interface dynamics which concern the analysis of the Cauchy problem for the evolution equation with initial data close to different phases and different regions of space.
Abstract: The limit load carrying capacity of functionally
graded materials (FGM) circular plates subjected to an arbitrary
rotationally symmetric loading has been computed. It is provided that
the plate material behaves rigid perfectly plastic and obeys either the
Square or the Tresca yield criterion. To this end the upper and lower
bound principles of limit analysis are employed to determine the
exact value for the limiting load. The correctness of the result are
verified and finally limiting loads for two examples namely; through
radius and through thickness FGM circular plates with simply
supported edges are calculated, respectively and moreover, the values
of critical loading factor are determined.
Abstract: This paper constructs a four factors theoretical model of Chinese small and medium enterprises based on the “cartoon characters- reputation - enterprise marketing and management capabilities – protection of the cartoon image - institutional environment" by literature research, case studies and investigation. The empirical study show that the greatest impact on current merchandising rights income is the institutional environment friendliness, followed by marketing and management capabilities, input of character image protection and Cartoon characters- reputation through the real-time grey relational analysis, and the greatest impact on post-merchandising rights profit is Cartoon characters reputation, followed by the institutional environment friendliness, then marketing and management ability and input of character image protection through the time-delay grey relational analysis.
Abstract: The geometric errors in the manufacturing process can
be reduced by optimal positioning of the fixture elements in the
fixture to make the workpiece stiff. We propose a new fixture layout
optimization method N-3-2-1 for large metal sheets in this paper that
combines the genetic algorithm and finite element analysis. The
objective function in this method is to minimize the sum of the nodal
deflection normal to the surface of the workpiece. Two different
kinds of case studies are presented, and optimal position of the
fixturing element is obtained for different cases.
Abstract: Vernacular building is considered as sustainable in
energy consumption and environment and its thermal performance is
more and more concerned by researchers. This paper investigates the
thermal property of the vernacular building in Lhasa by theoretical
analysis on the aspects of building form, envelope and materials etc.
The values of thermal resistance and thermal capacity of the envelope
are calculated and compared with the current China building code and
modern building case. And it is concluded that Lhasa vernacular
building meets the current China building code of thermal standards
and have better performance in some aspects, which is achieved by
various passive means with close response to local climate conditions.
Abstract: The scientific achievements coming from molecular
biology depend greatly on the capability of computational
applications to analyze the laboratorial results. A comprehensive
analysis of an experiment requires typically the simultaneous study
of the obtained dataset with data that is available in several distinct
public databases. Nevertheless, developing a centralized access to
these distributed databases rises up a set of challenges such as: what
is the best integration strategy, how to solve nomenclature clashes,
how to solve database overlapping data and how to deal with huge
datasets. In this paper we present GeNS, a system that uses a simple and yet innovative approach to address several biological data integration issues. Compared with existing systems, the main
advantages of GeNS are related to its maintenance simplicity and to its coverage and scalability, in terms of number of supported
databases and data types. To support our claims we present the current use of GeNS in two concrete applications. GeNS currently contains more than 140 million of biological relations and it can be
publicly downloaded or remotely access through SOAP web services.
Abstract: The paper discusses a 3D numerical solution of the inverse boundary problem for a continuous casting process of alloy. The main goal of the analysis presented within the paper was to estimate heat fluxes along the external surface of the ingot. The verified information on these fluxes was crucial for a good design of a mould, effective cooling system and generally the whole caster. In the study an enthalpy-porosity technique implemented in Fluent package was used for modeling the solidification process. In this method, the phase change interface was determined on the basis of the liquid fraction approach. In inverse procedure the sensitivity analysis was applied for retrieving boundary conditions. A comparison of the measured and retrieved values showed a high accuracy of the computations. Additionally, the influence of the accuracy of measurements on the estimated heat fluxes was also investigated.
Abstract: The forest fires in Thailand are annual occurrence which is the cause of air pollutions. This study intended to estimate the emission from forest fire during 2005-2009 using MODerateresolution Imaging Spectro-radiometer (MODIS) sensor aboard the Terra and Aqua satellites, experimental data, and statistical data. The forest fire emission is estimated using equation established by Seiler and Crutzen in 1982. The spatial and temporal variation of forest fire emission is analyzed and displayed in the form of grid density map. From the satellite data analysis suggested between 2005 and 2009, the number of fire hotspots occurred 86,877 fire hotspots with a significant highest (more than 80% of fire hotspots) in the deciduous forest. The peak period of the forest fire is in January to May. The estimation on the emissions from forest fires during 2005 to 2009 indicated that the amount of CO, CO2, CH4, and N2O was about 3,133,845 tons, 47,610.337 tons, 204,905 tons, and 6,027 tons, respectively, or about 6,171,264 tons of CO2eq. They also emitted 256,132 tons of PM10. The year 2007 was found to be the year when the emissions were the largest. Annually, March is the period that has the maximum amount of forest fire emissions. The areas with high density of forest fire emission were the forests situated in the northern, the western, and the upper northeastern parts of the country.
Abstract: This paper uses quasi-steady molecular statics model
and diamond tool to carry out simulation temperature rise of nanoscale
orthogonal cutting single-crystal silicon. It further qualitatively
analyzes temperature field of silicon workpiece without considering
heat transfer and considering heat transfer. This paper supposes that
the temperature rise of workpiece is mainly caused by two heat sources:
plastic deformation heat and friction heat. Then, this paper develops a
theoretical model about production of the plastic deformation heat and
friction heat during nanoscale orthogonal cutting. After the increased
temperature produced by these two heat sources are added up, the
acquired total temperature rise at each atom of the workpiece is
substituted in heat transfer finite difference equation to carry out heat
transfer and calculates the temperature field in each step and makes
related analysis.
Abstract: An unsupervised classification algorithm is derived
by modeling observed data as a mixture of several mutually
exclusive classes that are each described by linear combinations of
independent non-Gaussian densities. The algorithm estimates the
data density in each class by using parametric nonlinear functions
that fit to the non-Gaussian structure of the data. This improves
classification accuracy compared with standard Gaussian mixture
models. When applied to textures, the algorithm can learn basis
functions for images that capture the statistically significant structure
intrinsic in the images. We apply this technique to the problem of
unsupervised texture classification and segmentation.
Abstract: Network-Centric Air Defense Missile Systems
(NCADMS) represents the superior development of the air defense
missile systems and has been regarded as one of the major research
issues in military domain at present. Due to lack of knowledge and
experience on NCADMS, modeling and simulation becomes an effective
approach to perform operational analysis, compared with
those equation based ones. However, the complex dynamic interactions
among entities and flexible architectures of NCADMS put forward
new requirements and challenges to the simulation framework
and models. ABS (Agent-Based Simulations) explicitly addresses
modeling behaviors of heterogeneous individuals. Agents have capability
to sense and understand things, make decisions, and act on the
environment. They can also cooperate with others dynamically to
perform the tasks assigned to them. ABS proves an effective approach
to explore the new operational characteristics emerging in
NCADMS. In this paper, based on the analysis of network-centric
architecture and new cooperative engagement strategies for
NCADMS, an agent-based simulation framework by expanding the
simulation framework in the so-called System Effectiveness Analysis
Simulation (SEAS) was designed. The simulation framework specifies
components, relationships and interactions between them, the
structure and behavior rules of an agent in NCADMS. Based on scenario
simulations, information and decision superiority and operational
advantages in NCADMS were analyzed; meanwhile some
suggestions were provided for its future development.
Abstract: The automatic discrimination of seismic signals is an important practical goal for the earth-science observatories due to the large amount of information that they receive continuously. An essential discrimination task is to allocate the incoming signal to a group associated with the kind of physical phenomena producing it. In this paper, we present new techniques for seismic signals classification: local, regional and global discrimination. These techniques were tested on seismic signals from the data base of the National Geophysical Institute of the Centre National pour la Recherche Scientifique et Technique (Morocco) by using the Moroccan software for seismic signals analysis.
Abstract: In this study, the precision heading process of
spur gears has been investigated by means of numerical
analysis. The effect of some parameters such as teeth number
and module on the forming force and material flow were
presented. The simulation works were performed rigid-plastic
finite element method using DEFORM 3D software. In order
to validate the estimated numerical results, they were
compared with those obtained experimentally during heading
of spur gear using lead as a model material. Results showed
that the optimum number of gear teeth is between 10 to 20,
that is because of being the specific pressure in its minimum
value.
Abstract: Since large power transformers are the most
expensive and strategically important components of any power
generator and transmission system, their reliability is crucially
important for the energy system operation. Also, Circuit breakers are
very important elements in the power transmission line so monitoring
the events gives a knowledgebase to determine time to the next
maintenance. This paper deals with the introduction of the
comparative method of the state estimation of transformers and
Circuit breakers using continuous monitoring of voltage, current.
This paper gives details a new method based on wavelet to apparatus
insulation monitoring. In this paper to insulation monitoring of
transformer, a new method based on wavelet transformation and
neutral point analysis is proposed. Using the EMTP tools, fault in
transformer winding and the detailed transformer winding model
were simulated. The current of neutral point of winding was analyzed
by wavelet transformation. It is shown that the neutral current of the
transformer winding has useful information about fault in insulation
of the transformer.
Abstract: Among all geo-hydrological relationships, rainfallrunoff
relationship is of utmost importance in any hydrological
investigation and water resource planning. Spatial variation, lag time
involved in obtaining areal estimates for the basin as a whole can
affect the parameterization in design stage as well as in planning
stage. In conventional hydrological processing of data, spatial aspect
is either ignored or interpolated at sub-basin level. Temporal
variation when analysed for different stages can provide clues for its
spatial effectiveness. The interplay of space-time variation at pixel
level can provide better understanding of basin parameters.
Sustenance of design structures for different return periods and their
spatial auto-correlations should be studied at different geographical
scales for better management and planning of water resources.
In order to understand the relative effect of spatio-temporal
variation in hydrological data network, a detailed geo-hydrological
analysis of Betwa river catchment falling in Lower Yamuna Basin is
presented in this paper. Moreover, the exact estimates about the
availability of water in the Betwa river catchment, especially in the
wake of recent Betwa-Ken linkage project, need thorough scientific
investigation for better planning. Therefore, an attempt in this
direction is made here to analyse the existing hydrological and
meteorological data with the help of SPSS, GIS and MS-EXCEL
software. A comparison of spatial and temporal correlations at subcatchment
level in case of upper Betwa reaches has been made to
demonstrate the representativeness of rain gauges. First, flows at
different locations are used to derive correlation and regression
coefficients. Then, long-term normal water yield estimates based on
pixel-wise regression coefficients of rainfall-runoff relationship have
been mapped. The areal values obtained from these maps can
definitely improve upon estimates based on point-based
extrapolations or areal interpolations.
Abstract: In a state-of-the-art industrial production line of
photovoltaic products the handling and automation processes are of
particular importance and implication. While processing a fully
functional crystalline solar cell an as-cut photovoltaic wafer is subject
to numerous repeated handling steps. With respect to stronger
requirements in productivity and decreasing rejections due to defects
the mechanical stress on the thin wafers has to be reduced to a
minimum as the fragility increases by decreasing wafer thicknesses.
In relation to the increasing wafer fragility, researches at the
Fraunhofer Institutes IPA and CSP showed a negative correlation
between multiple handling processes and the wafer integrity. Recent
work therefore focused on the analysis and optimization of the dry
wafer stack separation process with compressed air. The achievement
of a wafer sensitive process capability and a high production
throughput rate is the basic motivation in this research.
Abstract: In aerospace applications, interactions of airflow with
aircraft structures can result in undesirable structural deformations.
This structural deformation in turn, can be predicted if the natural
modes of the structure are known. This can be achieved through
conventional modal testing that requires a known excitation force in
order to extract these dynamic properties. This technique can be
experimentally complex because of the need for artificial excitation
and it is also does not represent actual operational condition. The
current work presents part of research work that address the practical
implementation of operational modal analysis (OMA) applied to a
cantilevered hybrid composite plate employing single contactless
sensing system via laser vibrometer. OMA technique extracts the
modal parameters based only on the measurements of the dynamic
response. The OMA results were verified with impact hammer modal
testing and good agreement was obtained.
Abstract: The aims of this study were to compare the
differences of being good membership behavior among faculties and
staffs of Suan Sunandha Rajabhat University with different sex, age,
income, education, marital status, and working period, and
investigate the relationships between organizational commitment and
being good membership behavior. The research methodology
employed a questionnaire as a quantitative method. The respondents
were 305 faculties and staffs of Suan Sunandha Rajabhat University.
This research used Percentage, Mean, Standard Deviation, t-test,
One-Way ANOVA Analysis of Variance, and Pearson’s Product
Moment Correlation Coefficient in data analysis. The results showed
that organizational commitment among faculties and staffs of Suan
Sunandha Rajabhat University was at a high level. In addition,
differences in sex, age, income, education, marital status, and
working period revealed differences in being good membership
behavior. The results also indicated that organizational commitment
was significantly related to being good membership behavior.
Abstract: The mixing of pollutions and sediments in near shore regions of natural water bodies depends heavily on the characteristics such as the strength and frequency of flow instability. In the present paper, the instability of natural convection induced by absorption of solar radiation in littoral regions is considered. Spectral analysis is conducted on the quasi-steady state flow to reveal the power and frequency modes of the instability at various positions. Results indicate that the power of instability, the number of frequency modes, the prominence of higher frequency modes, and the highest frequency mode increase with the offshore distance and/or Rayleigh number. Harmonic modes are present at relatively low Rayleigh numbers. For a given offshore distance, the position with the strongest power of instability is located adjacent to the sloping bottom while the frequency modes are the same over the local depth. As the Rayleigh number increases, the unstable region extends toward the shore.