Abstract: Unmanned aircraft systems (UAS) are playing
increasingly prominent roles in defense programs and defense
strategies around the world. Technology advancements have
enabled the development of it to do many excellent jobs as
reconnaissance, surveillance, battle fighters, and communications
relays. Simulating a small unmanned aerial vehicle (SUAV)
dynamics and analyzing its behavior at the preflight stage is too
important and more efficient. The first step in the UAV design is
the mathematical modeling of the nonlinear equations of motion. .
In this paper, a survey with a standard method to obtain the full
non-linear equations of motion is utilized, and then the
linearization of the equations according to a steady state flight
condition (trimming) is derived. This modeling technique is
applied to an Ultrastick-25e fixed wing UAV to obtain the valued
linear longitudinal and lateral models. At the end the model is
checked by matching between the behavior of the states of the nonlinear
UAV and the resulted linear model with doublet at the
control surfaces.
Abstract: With drug resistance becoming widespread in
Plasmodium falciparum infections, the development of the alternative
drugs is the desired strategy for prevention and cure of malaria. Three
drug targets were selected to screen promising drug molecules from
the GSK library of 13469 molecules. Using an in silico structure-based
drug designing approach, the differences in binding energies of
the substrate and inhibitor were exploited between target sites of
parasite and human to design a drug molecule against Plasmodium.
The docking studies have shown several promising molecules from
GSK library with more effective binding as compared to the already
known inhibitors for the drug targets. Though stronger interaction has
been shown by several molecules as compared to the reference, few
molecules have shown the potential as drug candidates though in
vitro studies are required to validate the results. In case of
thymidylate synthase-dihydrofolatereductase (TS-DHFR), three
compounds have shown promise for future studies as potential drugs.
Abstract: The impact of Special Economic Zones (SEZs) has
been analyzed for many years by researchers. There are lot of
theoretical studies proving the SEZs importance for regional
development, however, there is lack of empirical studies (and they
are mainly focused on China market) that are based on available data.
The theoretical studies indicate the various impacts of enterprises
operating within SEZs on the economy. The article proves that, in
case of Poland, locating SEZs in municipalities is an important part
of increasing municipalities’ income. Therefore SEZs have a positive
impact on regional development. Municipality income is understood
as taxes paid by taxpayers who depend on SEZ companies’
performance. The analysis includes the Corporate Income Tax (CIT),
Personal Income Tax (PIT) and real estate tax. The effects of SEZs
on regional development were narrowed to a few variables that are
most significant for the financial system. The analysis indicates the
significant impact of SEZs on the amount of taxes influencing the
municipality budget.
Abstract: Future mobile networks following 5th generation will
be characterized by one thousand times higher gains in capacity;
connections for at least one hundred billion devices; user experience
capable of extremely low latency and response times. To be close to
the capacity requirements and higher reliability, advanced
technologies have been studied, such as multiple connectivity, small
cell enhancement, heterogeneous networking, and advanced
interference and mobility management. This paper is focused on the
multiple connectivity in heterogeneous cellular networks. We
investigate the performance of coverage and user throughput in several
deployment scenarios. Using the stochastic geometry approach, the
SINR distributions and the coverage probabilities are derived in case
of dual connection. Also, to compare the user throughput enhancement
among the deployment scenarios, we calculate the spectral efficiency
and discuss our results.
Abstract: A new concept of response system is proposed for
filling the gap that exists in reducing vulnerability during immediate
response to natural disasters. Real Time Early Response Systems
(RTERSs) incorporate real time information as feedback data for
closing control loop and for generating real time situation assessment.
A review of the state of the art on works that fit the concept of
RTERS is presented, and it is found that they are mainly focused on
manmade disasters. At the same time, in response phase of natural
disaster management many works are involved in creating early
warning systems, but just few efforts have been put on deciding what
to do once an alarm is activated. In this context a RTERS arises as a
useful tool for supporting people in their decision making process
during natural disasters after an event is detected, and also as an
innovative context for applying well-known automation technologies
and automatic control concepts and tools.
Abstract: In this study, the root of the name Lykaonia and the geographical area defined as Lykaonia Region are mentioned. In this context, information concerning the settlements of Paleolithic Age, Neolithic Age and Chalcolithic Age are given place. Particularly the settlements belonging to Classical Age are localized and brief information about the history of these settlements is provided. In the light of this information, roads of Antique period in the region are evaluated.
Abstract: The elastic period has a primary role in the seismic
assessment of buildings. Reliable calculations and/or estimates of the
fundamental frequency of a building and its site are essential during
analysis and design process. Various code formulas based on
empirical data are generally used to estimate the fundamental
frequency of a structure. For existing structures, in addition to code
formulas and available analytical tools such as modal analyses,
various methods of testing including ambient and forced vibration
testing procedures may be used to determine dynamic characteristics.
In this study, the dynamic properties of the 32 buildings located in
the Madinah of Saudi Arabia were identified using ambient motions
recorded at several, spatially-distributed locations within each
building. Ambient vibration measurements of buildings have been
analyzed and the fundamental longitudinal and transverse periods for
all tested buildings are presented. The fundamental mode of vibration
has been compared in plots with codes formulae (Saudi Building
Code, EC8, and UBC1997). The results indicate that measured
periods of existing buildings are shorter than that given by most
empirical code formulas. Recommendations are given based on the
common design and construction practice in Madinah city.
Abstract: Learning Management System (LMS) is the system
which uses to manage the learning in order to grouping the content
and learning activity between the lecturer and learner including
online examination and evaluation. Nowadays, it is the borderless
learning era so the learning activities can be accessed from
everywhere in the world and also anytime via the information
technology and media. The learner can easily access to the
knowledge so the different in time and distance is not a constraint for
learning anymore.
The learning pattern which was used in this research is the
integration of the in-class learning and online learning via internet
and will be able to monitor the progress by the Learning management
system which will create the fast response and accessible learning
process via the social media. In order to increase the capability and
freedom of the learner, the system can show the current and history
of the learning document, video conference and also has the chat
room for the learner and lecturer to interact to each other.
So the objectives of the “The Design and Applied of Learning
Management System via Social Media on Internet: Case Study of
Operating System for Business Subject” are to expand the
opportunity of learning and to increase the efficiency of learning as
well as increase the communication channel between lecturer and
student. The data of this research was collect from 30 users of the
system which are students who enroll in the subject. And the result of
the research is in the “Very Good” which is conformed to the
hypothesis.
Abstract: Absorptive capacity generally facilitates the adoption
of innovation. How does this relationship change when economic
return is not the sole driver of innovation uptake? We investigate
whether absorptive capacity facilitates the adoption of green
innovation based on a survey of 79 construction companies in
Scotland. Based on the results of multiple regression analyses, we
confirm that existing knowledge utilisation (EKU), knowledge
building (KB) and external knowledge acquisition (EKA) are
significant predictors of green process GP), green administrative
(GA) and green technical innovation (GT), respectively. We discuss
the implications for theories of innovation adoption and knowledge
enhancement associated with environmentally-friendly practices.
Abstract: This paper deals with current strategic challenges
related to the reshaping of the basic conditions of corporate operations.
Through the experimental analysis of some domestic corporations, it
presents how and to what extent Hungarian corporations are prepared
for the current strategic challenges. The study examines how strategic
directions and answer opportunities have changed in the following
interrelated areas in the past five years: economic globalization,
corporate sustainability, IT applications, labor force diversity and
ethical competences. The conclusions of the empirical survey give a
reliable basis on which economic organizations and enterprises can
formulate their strategy.
Abstract: Livestock is one of the fastest-growing sectors in
agriculture. If carefully managed, have potential opportunities for
economic growth, food sovereignty and food security. In this study
we mainly analyse and compare long-term i.e. for year 2030 climate
variability impact on predicted productivity of meat i.e. beef, mutton
and poultry for the Kingdom of Saudi Arabia w.r.t three factors i.e. i)
climatic-change vulnerability ii) CO2 fertilization and iii) water
scarcity and compare the results with two countries of the region i.e.
Iraq and Yemen. We do the analysis using data from diverse sources,
which was extracted, transformed and integrated before usage. The
collective impact of the three factors had an overall negative effect on
the production of meat for all the three countries, with adverse impact
on Iraq. High similarity was found between CO2 fertilization
(effecting animal fodder) and water scarcity i.e. higher than that
between production of beef and mutton for the three countries
considered. Overall, the three factors do not seem to be favorable for
the three Middle-East countries considered. This points to possibility
of a vegetarian year 2030 based on dependency on indigenous livestock
population.
Abstract: There has been a significant decline in active travel
and a massive increase in the use of car dependent travel in many
countries during the past two decades. Evidential risks for people’s
physical and mental health problems are correlated with this
increased use of motorized travel. These health related problems
range from overweight and obesity to increased air pollution. In
response to these rising concerns health professionals, traffic planers,
local authorities and others have introduced a variety of initiatives to
counterbalance the dominance of cars for daily journeys.
However, the nature of travel behavior change interventions,
which aim to reduce car use, are very complex and challenging
regarding their interactions with human behavior. To change travel
behavior at least two aspects have to be taken into consideration.
First, how to alter attitudes and perceptions toward the sustainable
and healthy modes of travel, in competition with experiences of
private car use. And second, how to make these behavior change
processes irreversible and sustainable. There are no comprehensive
models available to guide policy interventions to increase the level of
success of travel behavior change interventions across both these
dimensions.
A comprehensive theoretical framework is required in the effort to
optimize how to facilitate and guide the processes of data collection
and analysis to achieve the best possible guidelines for policy
makers. Regarding the gaps in the travel behavior change research
literature, this paper attempted to identify and suggest a
multidimensional framework in order to facilitate planning the
implemented travel behavior change interventions. A structured
mixed-method model is suggested to improve the analytic power of
the results according to the complexity of human behavior.
In order to recognize people’s attitudes towards a specific travel
mode, the Theory of Planned Behavior (TPB) was operationalized.
But in order to capture decision making processes the Transtheoretical
model of Behavior Change (TTM) was also used.
Consequently, the combination of these two theories (TTM and TPB)
has resulted in a synthesis with appropriate concepts to identify and
design an implemented travel behavior change interventions.
Abstract: In review the generalized data about different methods
of synthesis of biological activity halogenated di-, tri- and tetrahydroxyanthraquinones
is presented. The basic regularity of a
synthesis is analyzed. Action of temperature, pH, solubility, catalysts
and other factors on a reaction product yield is revealed.
Abstract: The purpose of this paper is to describe the
perceptions of knowledge and information sharing by the Polish
academic community. An electronic questionnaire was used to gather
opinions of respondents. The presented results are a part of the
findings of empirical studies carried out amongst academics from
various types of universities and academia located throughout
Poland.
Abstract: The turbocharger and turbocharging have been the
inherent component of diesel engines, so that critical parameters of
such engines, as BSFC (Brake Specific Fuel Consumption) or
thermal efficiency, fuel consumption, BMEP (Brake Mean Effective
Pressure), the power density output and emission level have been
improved extensively. In general, the turbocharger can be considered
as the most complex component of diesel engines, because it has
closely interrelated turbomachinery concepts of the turbines and the
compressors to thermodynamic fundamentals of internal combustion
engines and stress analysis of all components.
In this paper, a waste gate for a conventional single stage radial
turbine is investigated by consideration of turbochargers operation
constrains and engine operation conditions, without any detail
designs in the turbine and the compressor. Amount of opening waste
gate which extended between the ranges of full opened and closed
valve, is demonstrated by limiting compressor boost pressure ratio.
Obtaining of an optimum point by regard above mentioned items is
surveyed by three linked meanline modeling programs together
which consist of Turbomatch®, Compal®, Rital® madules in concepts
NREC® respectively.
Abstract: This study aims to analyze ceramic employees’
occupational health and safety training expectations. To that general
objective, the study tries to examine whether occupational health and
safety training expectations of ceramic employees meaningfully
differentiate depending on demographic features and professional,
social and economic conditions. For this purpose, a questionnaire was
developed by the researcher. The research data were collected
through this questionnaire called “Questionnaire of Occupational
Health and Safety Training Expectation” (QSOHSTE). QSOHSTE
was applied to 125 ceramic employees working in Kütahya, Turkey.
Data obtained from questionnaire were analyzed via SPSS 21.
The findings, obtained from the study, revealed that employees’
agreement level to occupational health and safety training expectation
statements is generally high-level. The findings reveal that employees
expect professional interest such as increased development and
investment, preventive measures for accidents, interventions to
evaluate the working conditions, establishment of safe working
environments and sustainment of adequate equipment for
occupational health and safety training process.
Besides these findings, employees’ agreement level to
occupational health and safety training expectation statements also
varies in terms of educational level, professional seniority, income
level and perception of economic condition.
Abstract: While millings materials from old pavement surface
can be an important component of cost effective maintenance
operation, their use in maintenance projects are not uniform and well
documented. This study documents the different maintenance
practices followed by four transportation districts of New Mexico
Department of Transportation (NMDOT) in an attempt to find
whether millings are being used in maintenance projects by those
districts. Based on existing literature, a questionnaire was developed
related to six common maintenance practices. NMDOT district
personal were interviewed face to face to discuss and get answers to
that questionnaire. It revealed that NMDOT districts mainly use chip
seal and patching. Other maintenance procedures such as sand seal,
scrub seal, slurry seal, and thin overlay have limited use. Two out of
four participating districts do not have any documents on chip
sealing; rather they employ the experiences of the chip seal crew. All
districts use polymer modified high float emulsion (HFE100P) for
chip seal with an application rate ranging from 0.4 to 0.56 gallons per
square yard. Chip application rate varies from 15 to 40 lb/ square
yard. State wide, the thickness of chip seal varies from 3/8'' to 1'' and
life varies from 3 to 10 years. NMDOT districts mainly use three type
of patching: pothole, dig-out and blade patch. Pothole patches are
used for small potholes and during emergency, dig-out patches are
used for all type of potholes sometimes after pothole patching, and
blade patch is used when a significant portion of the pavement is
damaged. Pothole patches last as low as three days whereas, blade
patch lasts as long as 3 years. It was observed that all participating
districts use millings in maintenance projects.
Abstract: The rhizome of Java grass, Cyperus rotundus was
extracted different organic polar and non-polar solvents and
performed the in vitro antiviral and immunostimulant activities
against White Spot Syndrome Virus (WSSV) and Vibrio harveyi
respectively. Based on the initial screening the ethyl acetate extract of
C. rotundus was strong activities and further it was purified through
silica column chromatography and the fractions were screened again
for antiviral and immunostimulant activity. Among the different
fractions screened against the WSSV and V. harveyi, the fractions, FIII
to FV had strong activities. In order to study the in vivo influence
of C. rotundus, the fractions (F-III to FV) were pooled and delivered
to the F. indicus through artificial feed for 30 days. After the feeding
trail the experimental and control diet fed F. indicus were challenged
with virulent WSSV and studied the survival, molecular diagnosis,
biochemical, haematological, and immunological parameters.
Surprisingly, the pooled fractions (F-IV to FVI) incorporated diets
helped to significantly (P
Abstract: The seismic responses of steel buildings with semirigid
post-tensioned connections (PC) are estimated and compared
with those of steel buildings with typical rigid (welded) connections
(RC). The comparison is made in terms of global and local response
parameters. The results indicate that the seismic responses in terms of
interstory shears, roof displacements, axial load and bending
moments are smaller for the buildings with PC connection. The
difference is larger for global than for local parameters, which in turn
varies from one column location to another. The reason for this
improved behavior is that the buildings with PC dissipate more
hysteretic energy than those with RC. In addition, unlike the case of
buildings with WC, for the PC structures the hysteretic energy is
mostly dissipated at the connections, which implies that structural
damage in beams and columns is not significant. According to these
results, steel buildings with PC are a viable option in high seismicity
areas because of their smaller response and self-centering connection
capacity as well as the fact that brittle failure is avoided.
Abstract: In this paper 3D FEM analysis was carried out on
double lap bonded joint with composite adherents subjected to
dynamic shear. The adherents are made of Carbon/Epoxy while the
adhesive is epoxy Araldite 2031. The maximum average shear stress
and the stress homogeneity in the adhesive layer were examined.
Three fibers textures were considered: UD; 2.5D and 3D with same
volume fiber then a parametric study based on changing the thickness
and the type of fibers texture in 2.5D was accomplished. Moreover,
adherents’ dissimilarity was also investigated. It was found that the
main parameter influencing the behavior is the longitudinal stiffness
of the adherents. An increase in the adherents’ longitudinal stiffness
induces an increase in the maximum average shear stress in the
adhesive layer and an improvement in the shear stress homogeneity
within the joint. No remarkable improvement was observed for
dissimilar adherents.