Abstract: Unmanned aerial vehicles (UAVs) performing their
operations for a long time have been attracting much attention in
military and civil aviation industries for the past decade. The
applicable field of UAV is changing from the military purpose only to
the civil one. Because of their low operation cost, high reliability and
the necessity of various application areas, numerous development
programs have been initiated around the world. To obtain the optimal
solutions of the design variable (i.e., sectional airfoil profile, wing
taper ratio and sweep) for high performance of UAVs, both the lift and
lift-to-drag ratio are maximized whereas the pitching moment should
be minimized, simultaneously. It is found that the lift force and
lift-to-drag ratio are linearly dependent and a unique and dominant
solution are existed. However, a trade-off phenomenon is observed
between the lift-to-drag ratio and pitching moment. As the result of
optimization, sixty-five (65) non-dominated Pareto individuals at the
cutting edge of design spaces that are decided by airfoil shapes can be
obtained.
Abstract: In this work, we consider the rational points on elliptic curves over finite fields Fp where p ≡ 5 (mod 6). We obtain results on the number of points on an elliptic curve y2 ≡ x3 + a3(mod p), where p ≡ 5 (mod 6) is prime. We give some results concerning the sum of the abscissae of these points. A similar case where p ≡ 1 (mod 6) is considered in [5]. The main difference between two cases is that when p ≡ 5 (mod 6), all elements of Fp are cubic residues.
Abstract: to simulate the phenomenon of electronic transport in semiconductors, we try to adapt a numerical method, often and most frequently it’s that of Monte Carlo. In our work, we applied this method in the case of a ternary alloy semiconductor GaInP in its cubic form; The Calculations are made using a non-parabolic effective-mass energy band model. We consider a band of conduction to three valleys (ΓLX), major of the scattering mechanisms are taken into account in this modeling, as the interactions with the acoustic phonons (elastic collisions) and optics (inelastic collisions). The polar optical phonons cause anisotropic collisions, intra-valleys, very probable in the III-V semiconductors. Other optical phonons, no polar, allow transitions inter-valleys. Initially, we present the full results obtained by the simulation of Monte Carlo in GaInP in stationary regime. We consider thereafter the effects related to the application of an electric field varying according to time, we thus study the transient phenomenon which make their appearance in ternary material
Abstract: The use of synthetic retardants in polymeric insulated
cables is not uncommon in the high voltage engineering to study
electrical treeing phenomenon. However few studies on organic
materials for the same investigation have been carried. .This paper
describes the study on the effects of Oil Palm Empty Fruit Bunch
(OPEFB) microfiller on the tree initiation and propagation in silicone
rubber with different weight percentages (wt %) of filler to insulation
bulk material. The weight percentages used were 0 wt % and 1 wt %
respectively. It was found that the OPEFB retards the propagation of
the electrical treeing development. For tree inception study, the
addition of 1(wt %) OPEFB has increase the tree inception voltage of
silicone rubber. So, OPEFB is a potential retardant to the initiation
and growth of electrical treeing occurring in polymeric materials for
high voltage application. However more studies on the effects of
physical and electrical properties of OPEFB as a tree retardant
material are required.
Abstract: Protein-protein interactions (PPI) play a crucial role in many biological processes such as cell signalling, transcription, translation, replication, signal transduction, and drug targeting, etc. Structural information about protein-protein interaction is essential for understanding the molecular mechanisms of these processes. Structures of protein-protein complexes are still difficult to obtain by biophysical methods such as NMR and X-ray crystallography, and therefore protein-protein docking computation is considered an important approach for understanding protein-protein interactions. However, reliable prediction of the protein-protein complexes is still under way. In the past decades, several grid-based docking algorithms based on the Katchalski-Katzir scoring scheme were developed, e.g., FTDock, ZDOCK, HADDOCK, RosettaDock, HEX, etc. However, the success rate of protein-protein docking prediction is still far from ideal. In this work, we first propose a more practical measure for evaluating the success of protein-protein docking predictions,the rate of first success (RFS), which is similar to the concept of mean first passage time (MFPT). Accordingly, we have assessed the ZDOCK bound and unbound benchmarks 2.0 and 3.0. We also createda new benchmark set for protein-protein docking predictions, in which the complexes have experimentally determined binding affinity data. We performed free energy calculation based on the solution of non-linear Poisson-Boltzmann equation (nlPBE) to improve the binding mode prediction. We used the well-studied thebarnase-barstarsystem to validate the parameters for free energy calculations. Besides,thenlPBE-based free energy calculations were conducted for the badly predicted cases by ZDOCK and ZRANK. We found that direct molecular mechanics energetics cannot be used to discriminate the native binding pose from the decoys.Our results indicate that nlPBE-based calculations appeared to be one of the promising approaches for improving the success rate of binding pose predictions.
Abstract: This paper presents a smart-card applet that is able to
verify X.509 certificates and to use the public key contained in the
certificate for verifying digital signatures that have been created
using the corresponding private key, e.g. for the purpose of authenticating
the certificate owner against the card. The approach has been
implemented as an operating prototype on Java cards.
Abstract: The issue of classifying objects into one of predefined
groups when the measured variables are mixed with different types
of variables has been part of interest among statisticians in many
years. Some methods for dealing with such situation have been
introduced that include parametric, semi-parametric and nonparametric
approaches. This paper attempts to discuss on a problem
in classifying a data when the number of measured mixed variables is
larger than the size of the sample. A propose idea that integrates a
dimensionality reduction technique via principal component analysis
and a discriminant function based on the location model is discussed.
The study aims in offering practitioners another potential tool in a
classification problem that is possible to be considered when the
observed variables are mixed and too large.
Abstract: Calcium magnesium acetate (CMA) is environmentally
benign deicing chemicals that can replace sodium chloride that is
widely used on roads and highways at present for snow and ice control
to provide safe driving conditions during winter. The price of CMA
from petroleum-derived acetic acid is quite expensive. The bamboo
vinegar is the by-product from bamboo charcoal production. The
bamboo vinegar was used to prepare calcium acetate as raw materials,
and its deicing and corrosive performances were studied in this paper.
The results show that the freezing temperature of calcium acetate is
lower than that of sodium chloride when they have same molar
concentration, the deicing performance of calcium acetate is better
than that of sodium chloride when they have same moles, while the
deicing performance of sodium chloride is better than that of calcium
acetate. The corrosion of sodium chloride on iron-nail and steel-nail is
larger than that of calcium acetate whether they have same mass
concentration or same molar concentration, and the corrosion of
sodium chloride and calcium acetate on iron-nail is larger than that on
steel-nail, and calcium acetate almost hasn't corrosion on steel-nail.
Abstract: Production of hard-to-cut materials with uncoated carbide cutting tools in turning, not only cause tool life reduction but also, impairs the product surface roughness. In this paper, influence of hot machining method were studied and presented in two cases. Case1-Workpiece surface roughness quality with constant cutting parameter and 300 ºC initial workpiece surface temperature. Case 2- Tool temperature variation when cutting with two speeds 78.5 (m/min) and 51 (m/min). The workpiece material and tool used in this study were AISI 1060 steel (45HRC) and uncoated carbide TNNM 120408-SP10(SANDVIK Coromant) respectively. A gas flam heating source was used to preheating of the workpiece surface up to 300 ºC, causing reduction of yield stress about 15%. Results obtained experimentally, show that the method used can considerably improved surface quality of the workpiece.
Abstract: Digital signature is a useful primitive to attain the integrity and authenticity in various wire or wireless communications. Proxy signature is one type of the digital signatures. It helps the proxy signer to sign messages on behalf of the original signer. It is very useful when the original signer (e.g. the president of a company) is not available to sign a specific document. If the original signer can not forge valid proxy signatures through impersonating the proxy signer, it will be robust in a virtual environment; thus the original signer can not shift any illegal action initiated by herself to the proxy signer. In this paper, we propose a new proxy signature scheme. The new scheme can prevent the original signer from impersonating the proxy signer to sign messages. The proposed scheme is based on the regular ElGamal signature. In addition, the fair privacy of the proxy signer is maintained. That means, the privacy of the proxy signer is preserved; and the privacy can be revealed when it is necessary.
Abstract: This paper presents a solution for a robotic
manipulation problem. We formulate the problem as combining
target identification, tracking and interception. The task in our
solution is sensing a target on a conveyor belt and then intercepting
robot-s end-effector at a convenient rendezvous point. We used
an object recognition method which identifies the target and finds
its position from visualized scene picture, then the robot system
generates a solution for rendezvous problem using the target-s initial
position and belt velocity . The interception of the target and the
end-effector is executed at a convenient rendezvous point along the
target-s calculated trajectory. Experimental results are obtained using
a real platform with an industrial robot and a vision system over it.
Abstract: The concerns of education and practice of architecture
do not necessarily overlap. Indeed the gap between them could be
seen increasingly and less frequently bridged. We suggest that
changing in architecture education and clarifying the relationship
between these two can help to find and address the opportunities and
unique positions to bridge this gulf.
Abstract: A novel feature selection strategy to improve the recognition accuracy on the faces that are affected due to nonuniform illumination, partial occlusions and varying expressions is proposed in this paper. This technique is applicable especially in scenarios where the possibility of obtaining a reliable intra-class probability distribution is minimal due to fewer numbers of training samples. Phase congruency features in an image are defined as the points where the Fourier components of that image are maximally inphase. These features are invariant to brightness and contrast of the image under consideration. This property allows to achieve the goal of lighting invariant face recognition. Phase congruency maps of the training samples are generated and a novel modular feature selection strategy is implemented. Smaller sub regions from a predefined neighborhood within the phase congruency images of the training samples are merged to obtain a large set of features. These features are arranged in the order of increasing distance between the sub regions involved in merging. The assumption behind the proposed implementation of the region merging and arrangement strategy is that, local dependencies among the pixels are more important than global dependencies. The obtained feature sets are then arranged in the decreasing order of discriminating capability using a criterion function, which is the ratio of the between class variance to the within class variance of the sample set, in the PCA domain. The results indicate high improvement in the classification performance compared to baseline algorithms.
Abstract: In this paper we study the inverse eigenvalue problem for symmetric special matrices and introduce sufficient conditions for obtaining nonnegative matrices. We get the HROU algorithm from [1] and introduce some extension of this algorithm. If we have some eigenvectors and associated eigenvalues of a matrix, then by this extension we can find the symmetric matrix that its eigenvalue and eigenvectors are given. At last we study the special cases and get some remarkable results.
Abstract: We describe an effective method for image encryption
which employs magnitude and phase manipulation using carrier
images. Although it involves traditional methods like magnitude and
phase encryptions, the novelty of this work lies in deploying the
concept of carrier images for encryption purpose. To this end, a
carrier image is randomly chosen from a set of stored images. One
dimensional (1-D) discrete Fourier transform (DFT) is then carried
out on the original image to be encrypted along with the carrier
image. Row wise spectral addition and scaling is performed between
the magnitude spectra of the original and carrier images by randomly
selecting the rows. Similarly, row wise phase addition and scaling is
performed between the original and carrier images phase spectra by
randomly selecting the rows. The encrypted image obtained by these
two operations is further subjected to one more level of magnitude
and phase manipulation using another randomly chosen carrier image
by 1-D DFT along the columns. The resulting encrypted image is
found to be fully distorted, resulting in increasing the robustness
of the proposed work. Further, applying the reverse process at the
receiver, the decrypted image is found to be distortionless.
Abstract: Iris-based biometric authentication is gaining importance
in recent times. Iris biometric processing however, is a complex
process and computationally very expensive. In the overall processing
of iris biometric in an iris-based biometric authentication system,
feature processing is an important task. In feature processing, we extract
iris features, which are ultimately used in matching. Since there
is a large number of iris features and computational time increases
as the number of features increases, it is therefore a challenge to
develop an iris processing system with as few as possible number of
features and at the same time without compromising the correctness.
In this paper, we address this issue and present an approach to feature
extraction and feature matching process. We apply Daubechies D4
wavelet with 4 levels to extract features from iris images. These
features are encoded with 2 bits by quantizing into 4 quantization
levels. With our proposed approach it is possible to represent an
iris template with only 304 bits, whereas existing approaches require
as many as 1024 bits. In addition, we assign different weights to
different iris region to compare two iris templates which significantly
increases the accuracy. Further, we match the iris template based on
a weighted similarity measure. Experimental results on several iris
databases substantiate the efficacy of our approach.
Abstract: Skin color can provide a useful and robust cue
for human-related image analysis, such as face detection,
pornographic image filtering, hand detection and tracking,
people retrieval in databases and Internet, etc. The major
problem of such kinds of skin color detection algorithms is
that it is time consuming and hence cannot be applied to a real
time system. To overcome this problem, we introduce a new
fast technique for skin detection which can be applied in a real
time system. In this technique, instead of testing each image
pixel to label it as skin or non-skin (as in classic techniques),
we skip a set of pixels. The reason of the skipping process is
the high probability that neighbors of the skin color pixels are
also skin pixels, especially in adult images and vise versa. The
proposed method can rapidly detect skin and non-skin color
pixels, which in turn dramatically reduce the CPU time
required for the protection process. Since many fast detection
techniques are based on image resizing, we apply our
proposed pixel skipping technique with image resizing to
obtain better results. The performance evaluation of the
proposed skipping and hybrid techniques in terms of the
measured CPU time is presented. Experimental results
demonstrate that the proposed methods achieve better result
than the relevant classic method.
Abstract: The present study was carried out to evaluate the
nutritional value of sorghum flour during processing of injera
(unleavened thick bread). The proximate composition of sorghum
flour before and after fermentation and that of injera was determined.
Compared to the raw flour and fermented one, injera had low protein
(11.55%), ash (1.57%) and fat (2.40%) contents but high in fiber
content. Moreover, injera was found to have significantly (P ≤ 0.05)
higher energy (389.08 Kcal/100g) compared to raw and fermented
sorghum flour. Injera contained lower levels of anti-nutritional
factors (polyphenols, phytate and tannins) compared to raw and
fermented sorghum. Also it was found to be rich in Ca
(4.75mg/100g), Fe (3.95 mg/100g), and Cu (0.7 mg/100g) compared
to that of raw and fermented flour. Moreover, both the extractable
minerals and protein digestibility were high for injera due to low
amount of anti-nutrients. Injera was found to contain an appreciable
amount of amino acids except arginine and tyrosine.
Abstract: The aim of this paper is to propose a dynamic integrated approach, based on modularity concept and on the business ecosystem approach, that exploit different eBusiness services for SMEs under an open business network platform. The adoption of this approach enables firms to collaborate locally for delivering the best product/service to the customers as well as globally by accessing international markets, interrelate directly with the customers, create relationships and collaborate with worldwide actors. The paper will be structured as following: We will start by offering an overview of the state of the art of eBusiness platforms among SME of food and tourism firms and then we discuss the main drawbacks that characterize them. The digital business ecosystem approach and the modularity concept will be described as the theoretical ground in which our proposed integrated model is rooted. Finally, the proposed model along with a discussion of the main value creation potentialities it might create for SMEs will be presented.
Abstract: In this paper, the Fuzzy Autocatalytic Set (FACS) is
composed into Omega Algebra by embedding the membership value
of fuzzy edge connectivity using the property of transitive affinity.
Then, the Omega Algebra of FACS is a transformation semigroup
which is a special class of semigroup is shown.