Abstract: Despite all the wide research and literature on the
subject, changing and challenging times often present themselves
with new objectives, fluid politics, and everlasting point of views.
Much is said about the subject and the trend nowadays is watching
every European Union (EU) intervention as a form of neo
colonialism or a form of establishing new markets. The paper will try to establish a perspective on EU influences,
policies and impacts analyzed from multidimensional point of view,
not limiting itself on a narrow external dimension, focusing on a
broader understanding of it diverse contribution to global governance
and peace keeping. Tending to be critical, this paper tends to fall out of extremes,
nether holding a Eurocentric position, nor falling for cheap critic to
the whole failures and impact of EU policies. The ambition is to
show EU as a contributing factor while keeping in mind its nature as
a multi layered actor and with not necessarily coinciding interests
among its member states.
Abstract: A theoretical study of a humidification
dehumidification solar desalination unit has been carried out to
increase understanding the effect of weather conditions on the unit
productivity. A humidification-dehumidification (HD) solar
desalination unit has been designed to provide fresh water for
population in remote arid areas. It consists of solar water collector
and air collector; to provide the hot water and air to the desalination
chamber. The desalination chamber is divided into humidification
and dehumidification towers. The circulation of air between the two
towers is maintained by the forced convection. A mathematical
model has been formulated, in which the thermodynamic relations
were used to study the flow, heat and mass transfer inside the
humidifier and dehumidifier. The present technique is performed in
order to increase the unit performance. Heat and mass balance has
been done and a set of governing equations has been solved using the
finite difference technique. The unit productivity has been calculated
along the working day during the summer and winter sessions and
has compared with the available experimental results. The average
accumulative productivity of the system in winter has been ranged
between 2.5 to 4 (kg/m2)/day, while the average summer productivity
has been found between 8 to 12 (kg/m2)/day.
Abstract: To maintain a healthy balanced loyalty, whether to art
or society, posits a debatable issue. The artist is always on the look
out for the potential tension between those two realms. Therefore,
one of the most painful dilemmas the artist finds is how to function in
a society without sacrificing the aesthetic values of his/her work. In
other words, the life-long awareness of failure which derives from the
concept of the artist as caught between unflattering social realities
and the need to invent genuine art forms becomes a fertilizing soil for
the artists to be tackled. Thus, within the framework of this dilemma,
the question of the responsibility of the artist and the relationship of
the art to politics will be illuminating. To a larger extent, however, in
drama, this dilemma is represented by the fictional characters of the
play. The present paper tackles the idea of the amorality of the artist in
selected plays by Tom Stoppard. However, Stoppard’s awareness of
his situation as a refugee has led him to keep at a distance from
politics. He tried hard to avoid any intervention into the realms of
political debate, especially in his earliest work. On the one hand, it is
not meant that he did not interest in politics as such, but rather he
preferred to question it than to create a fixed ideological position. On
the other hand, Stoppard’s refusal to intervene in politics is ascribed
to his feeling of gratitude to Britain where he settled. As a result,
Stoppard has frequently been criticized for a lack of political
engagement and also for not leaning too much for the left when he
does engage. His reaction to these public criticisms finds expression
in his self-conscious statements which defensively stressed the
artifice of his work. He, like Oscar Wilde thinks that the
responsibility of the artist is devoted to the realm of his/her art.
Consequently, his consciousness for the role of the artist is truly
reflected in his two plays, Artist Descending a Staircase (1972) and
Travesties (1974).
Abstract: The Petri nets are the first standard for business
process modeling. Most probably, it is one of the core reasons why
all new standards created afterwards have to be so reformed as to
reach the stage of mapping the new standard onto Petri nets. The paper presents a business process repository based on a
universal database. The repository provides the possibility the data
about a given process to be stored in three different ways. Business
process repository is developed with regard to the reformation of a
given model to a Petri net in order to be easily simulated. Two different techniques for business process simulation based on
Petri nets - Yasper and Woflan are discussed. Their advantages and
drawbacks are outlined. The way of simulating business process
models, stored in the Business process repository is shown.
Abstract: The rapid development technology and widespread
Internet make business environment changing a lot. In order to stand in
the global market and to keep subsistence, “changing” is unspoken
rule for the company’s survival. The purpose of this paper is building
up change model by using SWOT, strategy map, KPI and change
management theory. The research findings indicate that the company
needs to deal with employee’s resistance emotion firstly before
building up change model. The ways of providing performance
appraisal reward, consulting and counseling mechanisms that will
great help to achieve reducing staff negative emotions and motivate
staff’s efficiencies also. To revise strategy map, modify corporate
culture, and improve internal operational processes which is based on
change model. Through the change model, the increasing growth rate
of net income helps company to achieve the goals and be a leading
brand of precision machinery industry.
Abstract: This paper presents the results of a study to assess
crucial aspects and the strength of the scientific basis of a typically
interdisciplinary, applied field: food supply chain risk assessment
research. Our approach is based on an advanced scientometrics
analysis that is a quantitative study of the disciplines of science based
on published literature to measure interdisciplinary. This paper aims
to describe the quantity and quality of the publication trends in food
supply chain risk assessment. The publication under study was
composed of 266 articles from database web of science. The results
were analyzed based on date of publication, type of document,
language of the documents, source of publications, subject areas,
authors and their affiliations, and the countries involved in
developing the articles.
Abstract: Steel extended end plate bolted connections are
recommended to be widely utilized in special moment-resisting frame
subjected to monotonic loading. Improper design of steel beam to
column connection can lead to the collapse and fatality of structures.
Therefore comprehensive research studies of beam to column
connection design should be carried out. Also the performance and
effect of corrugated on the strength of beam column end plate
connection up to failure under monotonic loading in horizontal
direction is presented in this paper. The non-linear elastic–plastic
behavior has been considered through a finite element analysis using
the multi-purpose software package LUSAS. The effect of vertically
and horizontally types of corrugated web was also investigated.
Abstract: Machine visualization is an area of interest with fast
and progressive development. We present a method of machine
visualization which will be applicable in real industrial conditions
according to current needs and demands. Real factory data were
obtained in a newly built research plant. Methods described in this
paper were validated on a case study. Input data were processed and
the virtual environment was created. The environment contains
information about dimensions, structure, disposition, and function.
Hardware was enhanced by modular machines, prototypes, and
accessories. We added functionalities and machines into the virtual
environment. The user is able to interact with objects such as testing
and cutting machines, he/she can operate and move them. Proposed
design consists of an environment with two degrees of freedom of
movement. Users are in touch with items in the virtual world which
are embedded into the real surroundings. This paper describes development of the virtual environment. We
compared and tested various options of factory layout virtualization
and visualization. We analyzed possibilities of using a 3D scanner in
the layout obtaining process and we also analyzed various virtual
reality hardware visualization methods such as: Stereoscopic (CAVE)
projection, Head Mounted Display (HMD) and augmented reality
(AR) projection provided by see-through glasses.
Abstract: The research on thermoelectric has been a blooming field of research for the latest decade, owing to large amount of heat source available to be harvested, being eco-friendly and static in operation. This paper provides the performance of thermoelectric generator (TEG) with bulk material of bismuth telluride, Bi2Te3. Later, the performance of the TEGs is evaluated by considering attaching the TEGs on a plastic (polyethylene sheet) in contrast to the common method of attaching the TEGs on the metal surface.
Abstract: The agenda of showing the scheduled time for
performing certain tasks is known as timetabling. It is widely used in
many departments such as transportation, education, and production.
Some difficulties arise to ensure all tasks happen in the time and
place allocated. Therefore, many researchers invented various
programming models to solve the scheduling problems from several
fields. However, the studies in developing the general integer
programming model for many timetabling problems are still
questionable. Meanwhile, this thesis describes about creating a
general model which solves different types of timetabling problems
by considering the basic constraints. Initially, the common basic
constraints from five different fields are selected and analyzed. A
general basic integer programming model was created and then
verified by using the medium set of data obtained randomly which is
much similar to realistic data. The mathematical software, AIMMS
with CPLEX as a solver has been used to solve the model. The model
obtained is significant in solving many timetabling problems easily
since it is modifiable to all types of scheduling problems which have
same basic constraints.
Abstract: Anaerobic digestion is a well-known technique for
sustainable energy recovery from sewage sludge. However, sewage
sludge digestion is restricted due to certain factors. Pre-treatment
methods have been established in various publications as a promising
technique to improve the digestibility of the sewage sludge and to
enhance the biogas generated which can be used for energy recovery.
In this study, continuous flow microwave (MW) pre-treatment with
different intensities were compared by using 5 L semi-continuous
digesters at a hydraulic retention time of 27 days. We focused on the
effects of MW at different intensities on the sludge solubilization,
sludge digestibility, and biogas production of the untreated and MW
pre-treated sludge. The MW pre-treatment demonstrated an increase
in the ratio of soluble chemical oxygen demand to total chemical
oxygen demand (sCOD/tCOD) and volatile fatty acid (VFA)
concentration. Besides that, the total volatile solid (TVS) removal
efficiency and tCOD removal efficiency also increased during the
digestion of the MW pre-treated sewage sludge compared to the
untreated sewage sludge. Furthermore, the biogas yield also
subsequently increases due to the pre-treatment effect. A higher MW
power level and irradiation time generally enhanced the biogas
generation which has potential for sustainable energy recovery from
sewage treatment plant. However, the net energy balance tabulation
shows that the MW pre-treatment leads to negative net energy production.
Abstract: The aim of the study is to describe and analyze design
of mobile teaching for students collaborative learning in distance
higher education with a focus on mobile technologies as online
webinars (web-based seminars or conferencing) by using laptops,
smart phones, or tablets. These multimedia tools can provide face-toface
interactions, recorded flipped classroom videos and parallel chat
communications. The data collection consists of interviews with 22
students and observations of online face-to-face webinars, as well
two surveys. Theoretically, the study joins the research tradition of
Computer Supported Collaborative learning, CSCL, as well as
Computer Self-Efficacy, CSE concerned with individuals’ media and
information literacy. Important conclusions from the study
demonstrated mobile interactions increased student centered
learning. As the students were appreciating the working methods,
they became more engaged and motivated. The mobile technology
using among student also contributes to increased flexibility between
space and place, as well as media and information literacy.
Abstract: In order to investigate the prebiotic potential of
oligosaccharides prepared by chemical hydrolysis of water-soluble
polysaccharides (WSP) from Zizyphus lotus leaves, the effect of
oligosaccharides on bacterial growth was studied. The chemical
composition of WSP was evaluated by colorimetric assays revealed
the average values: 7.05±0.73% proteins and 86.21±0.74%
carbohydrates, among them 64.81±0.42% is neutral sugar and the rest
16.25±1.62% is uronic acids. The characterization of
monosaccharides was determined by high performance anion
exchange chromatography with pulsed amperometric detection
(HPAEC-PAD) was found to be composed of galactose (23.95%),
glucose (21.30%), rhamnose (20.28%), arabinose (9.55%), and
glucuronic acid (22.95%). The effects of oligosaccharides on the
growth of lactic acid bacteria were compared with those of fructooligosaccharide
(RP95). The oligosaccharides concentration was
1g/L of Man, Rogosa, Sharpe broth. Bacterial growth was assessed
during 2, 4.5, 6.5, 9, 12, 16 and 24 h by measuring the optical density
of the cultures at 600 nm (OD600) and pH values. During
fermentation, pH in broth cultures decreased from 6.7 to 5.87±0.15.
The enumeration of lactic acid bacteria indicated that
oligosaccharides led to a significant increase in bacteria (P≤0.05)
compared to the control. The fermentative metabolism appeared to be
faster on RP95 than on oligosaccharides from Zizyphus lotus leaves.
Both RP95 and oligosaccharides showed clear prebiotic effects, but
had differences in fermentation kinetics because of to the different
degree of polymerization. This study shows the prebiotic
effectiveness of oligosaccharides, and provides proof for the selection
of leaves of Zizyphus lotus for use as functional food ingredients.
Abstract: In the recent past, discussing about sex among
children and youths was frowned at by traditional norms and as such
sexual discussions and behavior were approached with great respect.
Things are actually falling apart with the increasing number of young
people that engage in premarital sex. Due to lack of experience and
sex education, many young people are becoming increasingly
exposed to the risk of HIV infection. In the light of the above, this
study discussed premarital sex, HIV, and use of condom among
youths in Nigeria. Data for this study came from 2013 Nigeria
Demographic and Health Survey and other secondary data. The
survey revealed that only 18.5 percent of young women that had sex
in the 12 months preceding the survey used condom. Out of 3306
never-married sexually active men and women, 1728 representing 52
percent live in urban areas and 43 percent of them did not use
condom during sexual intercourse in the 12 months preceding the
survey. This study concludes that for there to be reduction in
prevalence of HIV/AIDS among Nigerian youths, there is need for
concerted effort to be made towards educating youths on the
expedient of the use of condom during sexual intercourse.
Abstract: Lateral Geniculate Nucleus (LGN) is the relay center
in the visual pathway as it receives most of the input information
from retinal ganglion cells (RGC) and sends to visual cortex. Low
threshold calcium currents (IT) at the membrane are the unique
indicator to characterize this firing functionality of the LGN neurons
gained by the RGC input. According to the LGN functional
requirements such as functional mapping of RGC to LGN, the
morphologies of the LGN neurons were developed. During the
neurological disorders like glaucoma, the mapping between RGC and
LGN is disconnected and hence stimulating LGN electrically using
deep brain electrodes can restore the functionalities of LGN. A
computational model was developed for simulating the LGN neurons
with three predominant morphologies each representing different
functional mapping of RGC to LGN. The firings of action potentials
at LGN neuron due to IT were characterized by varying the
stimulation parameters, morphological parameters and orientation. A
wide range of stimulation parameters (stimulus amplitude, duration
and frequency) represents the various strengths of the electrical
stimulation with different morphological parameters (soma size,
dendrites size and structure). The orientation (0-1800) of LGN
neuron with respect to the stimulating electrode represents the angle
at which the extracellular deep brain stimulation towards LGN
neuron is performed. A reduced dendrite structure was used in the
model using Bush–Sejnowski algorithm to decrease the
computational time while conserving its input resistance and total
surface area. The major finding is that an input potential of 0.4 V is
required to produce the action potential in the LGN neuron which is
placed at 100 μm distance from the electrode. From this study, it can
be concluded that the neuroprostheses under design would need to
consider the capability of inducing at least 0.4V to produce action
potentials in LGN.
Abstract: This paper describes the development of a DNA-based
nanobiosensor to detect the dengue virus in mosquito using
electrically active magnetic (EAM) nanoparticles as concentrator and
electrochemical transducer. The biosensor detection encompasses
two sets of oligonucleotide probes that are specific to the dengue
virus: the detector probe labeled with the EAM nanoparticles and the
biotinylated capture probe. The DNA targets are double hybridized to
the detector and the capture probes and concentrated from
nonspecific DNA fragments by applying a magnetic field.
Subsequently, the DNA sandwiched targets (EAM-detector probe–
DNA target–capture probe-biotin) are captured on streptavidin
modified screen printed carbon electrodes through the biotinylated
capture probes. Detection is achieved electrochemically by measuring
the oxidation–reduction signal of the EAM nanoparticles. Results
indicate that the biosensor is able to detect the redox signal of the
EAM nanoparticles at dengue DNA concentrations as low as 10
ng/μl.
Abstract: Diets high in processed foods have been found to lack
essential micro-nutrients for optimum human development and
overall health. Some micro-nutrients such as copper (Cu) have been
found to enhance the inflammatory response through its oxidative
functions, thereby having a role in cardiovascular disease, metabolic
syndrome, diabetes and related complications. This research study
was designed to determine if food crops could be bio-fortified with
micro-nutrients by growing sprouts on mineral fortified fiber mats. In
the feasibility study described in this contribution, recycled cellulose
fibers and clay, saturated with either micro-nutrient copper ions or
copper nanoparticles, were converted to a novel mineral-cellulose
fiber carrier of essential micro-nutrient and of antimicrobial
properties. Seeds of Medicago sativa (alfalfa), purchased from a
commercial, organic supplier were germinated on engineered
cellulose fiber mats. After the appearance of the first leaves, the
sprouts were dehydrated and analyzed for Cu content. Nutrient
analysis showed ~2 increase in Cu of the sprouts grown on the fiber
mats with copper particles, and ~4 increase on mats with ionic copper
as compared to the control samples. This study illustrates the
potential for the use of engineered mats as a viable way to increase
the micro-nutrient composition of locally-grown food crops and the
need for additional research to determine the uptake, nutritional
implications and risks of micro-nutrient bio-fortification.
Abstract: Nature constantly changes as a result of human
necessities. This change mostly feels in natural water sources which
are reconstructed with an effect of dams and motorways. In other
respects, visual quality of the landscape gets a new and different
character during and after the construction of dams and motorways.
Changing and specialization new landscapes will be very important
to protection-usage balance to explore sustainable usage facilities.
The main cause of the selection of Artvin city is that it has very
important geographical location and one of the most attraction points
in the World with its biodiversity, conservation areas and natural
landscape characteristics. Many hydroelectric station and 7 dams are
situated, 3 of them have already been built on the Çoruh River in the
province of Artvin. As a result of dams, motorways route were reshaped
and the ways which have already changed because of
elevation is directly affected several of natural destruction. In
contrast, many different reservoirs in Coruh Basin provide new vista
point that has high visual quality. In this study, we would like to
evaluate with sustainable landscape design in 76 km river corridor,
which is mainly based on Deriner, Borçka and Muratlı Dams and
determination of their basin-lakes recreational potential and
opportunities. Lastly, we are going to give some suggestion about the
potential of the corridor.
Abstract: This paper concentrates on the sustainable traditional
architecture and urban planning in hot-humid regions of Iran. In a
vast country such as Iran with different climatic zones traditional
builders have presented series of logical solutions for human comfort.
The aim of this paper is to demonstrate traditional architecture in hothumid
climate of Iran as a sample of sustainable architecture. Iranian
traditional architecture has been able to response to environmental
problems for a long period of time. Its features are based on climatic
factors, local construction materials of hot-humid regions and culture.
This paper concludes that Iranian traditional architecture can be
addressed as a sustainable architecture.
Abstract: The current statuses of lifetime test of LaB6 hollow
cathode at the Lanzhou Institute of Physics (LIP), China, was
described. 5A LaB6 hollow cathode was design for LIPS-200 40mN
Xenon ion thruster, and it could be used for LHT-100 80 mN Hall
thruster, too. Life test of the discharge and neutralizer modes of LHC-5
hollow cathode were stared in October 2011, and cumulative operation
time reached 17,300 and 16,100 hours in April 2015, respectively. The
life of cathode was designed more than 11,000 hours. Parameters of
discharge and key structure dimensions were monitored in different
stage of life test indicated that cathodes were health enough. The test
will continue until the cathode cannot work or operation parameter is
not in normally. The result of the endurance test of cathode
demonstrated that the LaB6 hollow cathode is satisfied for the required
of thruster in life and performance.