Abstract: The paper is intended to declare and apply ethics, i. e.
moral principles, rules in marketing environment. Ethical behavior of
selected pharmaceutical companies in the Slovak Republic is the
object of our research. The aim of our research is to determine
perception of ethical behavior of the pharmaceutical industry in
Slovakia by the medicine representatives in comparison with the
assessment of doctors and patients. The experimental sample
included 90 participants who were divided into three groups:
medicine representatives of the pharmaceutical companies (N=30),
doctors (N=30) and patients (N=30). The research method was a
Questionnaire of ethical behavior, created by us, that describes
individual areas included in the Code of ethics of the pharmaceutical
industry in Slovakia. The results showed influence of professional
status on ethical behavior perception, not gender. Higher perception
was indicated at patients rather than doctors and medicine
representatives.
Abstract: The mechanical and tribological properties in WC-Co
coatings are strongly affected by hardness and elasticity
specifications. The results revealed the effect of spraying distance on
microhardness and elasticity modulus of coatings. The metallurgical
studies have been made on coated samples using optical microscopy,
scanning electron microscopy (SEM).
Abstract: Experiments were conducted to characterize fire
properties of wood exposed to the certain external heat flux and
under variety of wood moisture content. Six kinds of Indonesian
wood: keruing, sono, cemara, kamper, pinus, and mahoni were
exposed to radiant heat from a conical heater, result in appearance of
a stable flame on the wood surface caused by spontaneous ignition. A
thermocouple K-type was used to measure the wood surface
temperature. Temperature histories were recorded throughout each
experiment at 1 s intervals using a TC-08. Data of first ignition time
and temperature, end ignition time and temperature, and charring rate
have been successfully collected. It was found that the ignition
temperature and charring rate depend on moisture content of wood.
Abstract: Soils are normally dried in either a convection oven or stove. Laboratory moisture content testing indicated that the typical drying durations for a convection oven were, 24 hours. The purpose of this study was to determine the accuracy and soil drying duration of both, moisture content and liquid limit using microwave radiation. The soils were tested with both, convection and microwave ovens. The convection oven was considered to produce the true values for both, natural moisture content and liquid limit of soils; it was, therefore, used as a basis for comparison for the results of the microwave ovens. The samples used in this study were obtained from different projects of Consulting Engineering Bureau of College of Engineering of Sulaimani University. These samples were collected from different locations and at the different depths and consist mostly of brown and light brown clay and silty clay. A total of 102 samples were prepared. 26 of them were tested for natural moisture determination, while the other 76 were used for liquid limits determination
Abstract: Lighting upgrades involve relatively lower costs which
allow the benefits to be spread more widely than is possible with any
other energy efficiency measure. In order to popularize the adoption of
CFL in Taiwan, the authority proposes to implement a new energy efficient lamp comparative label system. The current study was
accordingly undertaken to investigate the factors affecting the performance and the deviation of actual and labeled performance of
commercially available integrated CFLs. In this paper, standard test
methods to determine the electrical and photometric performances of
CFL were developed based on CIE 84-1989 and CIE 60901-1987,
then 55 selected CFLs from market were tested. The results show that
with higher color temperature of CFLs lower efficacy are achieved. It
was noticed that the most packaging of CFL often lack the information of Color Rendering Index. Also, there was no correlation between
price and performance of the CFLs was indicated in this work. The results of this paper might help consumers to make more informed
CFL-purchasing decisions.
Abstract: The purpose of this study is to analyze the islands
tourist travel information sources, as well as for the satisfaction of the
tourist destination services. This study used questionnaires to the
island of Taiwan to the Penghu Islands to engage in tourism activities
tourist adopt the designated convenience sampling method, a total of
889 valid questionnaires were collected. After statistical analysis, this
study found that: 1. tourists to the Penghu Islands travel information
source for “friends and family came to Penghu". 2. Tourists feel the
service of the outlying islands of Penghu, the highest feelings of
“friendly local residents". 3. There are different demographic variables
affect the tourist travel information source and service satisfaction.
Based on the findings of this study not only for Penghu's tourism
industry with the unit in charge of the proposed operating and
suggestions for future research to other researchers.
Abstract: The aim of the study was to evaluate the effect of
texturizers on the rheological properties of the apple mass and
desserts made from various raw materials. The apple varieties -
‘Antonovka’, ‘Baltais Dzidrais’, and ‘Zarja Alatau’ harvested in
Latvia, were used for the experiment. The apples were processed in a
blender unpeeled for obtaining a homogenous mass. The apple mass
was analyzed fresh and after storage at –18ºC. Both fresh and thawed
apple mass samples with added gelatin, xantan gum, and sodium
carboxymethylcellulose were whisked obtaining dessert. Pectin, pH
and soluble dry matter of the product were determined. Apparent
viscosity was measured using a rotational viscometer DV–III Ultra.
Pectin content in frozen apple mass decreased significantly (p
Abstract: Acute kidney injury (AKI) is a new worldwide public
health problem. A diagnosis of this disease using creatinine is still a
problem in clinical practice. Therefore, a measurement of biomarkers
responsible for AKI has received much attention in the past couple
years. Cytokine interleukin-18 (IL-18) was reported as one of the
early biomarkers for AKI. The most commonly used method to
detect this biomarker is an immunoassay. This study used a planar
platform to perform an immunoassay using fluorescence for
detection. In this study, anti-IL-18 antibody was immobilized onto a
microscope slide using a covalent binding method. Make-up samples
were diluted at the concentration between 10 to 1000 pg/ml to create
a calibration curve. The precision of the system was determined
using a coefficient of variability (CV), which was found to be less
than 10%. The performance of this immunoassay system was
compared with the measurement from ELISA.
Abstract: In Grid computing, a data transfer protocol called
GridFTP has been widely used for efficiently transferring a large volume
of data. Currently, two versions of GridFTP protocols, GridFTP
version 1 (GridFTP v1) and GridFTP version 2 (GridFTP v2), have
been proposed in the GGF. GridFTP v2 supports several advanced
features such as data streaming, dynamic resource allocation, and
checksum transfer, by defining a transfer mode called X-block mode.
However, in the literature, effectiveness of GridFTP v2 has not been
fully investigated. In this paper, we therefore quantitatively evaluate
performance of GridFTP v1 and GridFTP v2 using mathematical
analysis and simulation experiments. We reveal the performance
limitation of GridFTP v1, and quantitatively show effectiveness of
GridFTP v2. Through several numerical examples, we show that by
utilizing the data streaming feature, the average file transfer time of
GridFTP v2 is significantly smaller than that of GridFTP v1.
Abstract: Object-oriented programming is a wonderful way to
make programming of huge real life tasks much easier than by using
procedural languages. In order to teach those ideas to students, it
is important to find a good task that shows the advantages of OOprogramming
very naturally. This paper gives an example, the game
Battleship, which seems to work excellent for teaching the OO ideas
(using Java, [1], [2], [3], [4]).
A three-step task is presented for how to teach OO-programming
using just one example suitable to convey many of the OO ideas.
Observations are given at the end and conclusions about how the
whole teaching course worked out.
Abstract: The zinc and iron environments in different growth
stages have been studied with EXAFS and XANES with Brookhaven
Synchrotron Light Source. Tissue samples included meat, organ,
vegetable, leaf, and yeast. The project studied the EXAFS and
XANES of tissue samples using Zn and Fe K-edges. Duck embryo
samples show that brain and intestine would contain shorter EXFAS
determined Zn-N/O bond; as with the cases of fresh yeast versus
reconstituted live yeast and green leaf versus yellow leaf. The
XANES Fourier transform characteristic-length would be useful as a
functionality index for selected types of tissue samples in various
physical states. The extension to the development of functional
synchrotron imaging for tissue engineering application based on
spectroscopic technique is discussed.
Abstract: The Beshar River is one aquatic ecosystem, which is
located next to the city of Yasuj in southern Iran. The Beshar river
has been contaminated by industrial factories such as effluent of
sugar factory, agricultural and other activities in this region such as,
Imam Sajjad hospital, drainage from agricultural farms, Yasuj urban
surface runoff and effluent of wastewater treatment plants ,specially
Yasuj waste water treatment plant. In order to evaluate the effects of
these pollutants on the quality of the Beshar river, five monitoring
stations were selected along its course. The first station is located
upstream of Yasuj near the Dehnow village; stations 2 to 4 are
located east, south and west of city; and the 5th station is located
downstream of Yasuj. Several water quality parameters were
sampled. These include pH, dissolved oxygen, biological oxygen
demand (BOD), temperature, conductivity, turbidity, total dissolved
solids and discharge or flow measurements. Water samples from the
five stations were collected and analyzed to determine the following
physicochemical parameters: EC, pH, T.D.S, T.H, No2, DO, BOD5,
COD during 2008 to 2010. The study shows that the BOD5 value of
station 1 is at a minimum (1.7 ppm) and increases downstream from
stations 2 to 4 to a maximum (11.6 ppm), and then decreases at
station 5. The DO values of station 1 is a maximum (8.45 ppm),
decreases downstream to stations 2 - 4 which are at a minimum (3.1
ppm), before increasing at station 5. The amount of BOD and TDS
are highest at the 4th station and the amount of DO is lowest at this
station, marking the 4th station as more highly polluted than the
other stations .This study shows average amount of the water quality
parameters in first year of sampling (2008) have had a better quality
relation to third year in 2010 because of recent drought in this region
and pollutant increasing .As the Beshar river path after 5th station
goes through the mountain area with more slope and flow velocity
,so the physicochemical parameters improve at the 5th station due to
pollutant degradation and dilution. Finally the point and nonpoint
pollutant sources of Beshar river were determined and compared to
the monitoring results.
Abstract: The proposed paper examines strategies whose aim is
to counter the all too often sighted process of abandonment that
characterizes contemporary cities. The city of Nicosia in Cyprus is
used as an indicative case study, whereby several recent projects are
presented as capitalizing on traditional cultural assets to revive the
downtown. The reuse of existing building stock as museums,
performing arts centers and theaters but also as in the form of various
housing typologies is geared to strengthen the ranks of local residents
and to spur economic growth. Unlike the examples from the 1960s,
the architecture of more recent adaptive reuse for urban regeneration
seems to be geared in reinforcing a connection to the city where the
buildings often reflect the characteristics of their urban context.
Abstract: Throughput is an important measure of performance of production system. Analyzing and modeling of production throughput is complex in today-s dynamic production systems due to uncertainties of production system. The main reasons are that uncertainties are materialized when the production line faces changes in setup time, machinery break down, lead time of manufacturing, and scraps. Besides, demand changes are fluctuating from time to time for each product type. These uncertainties affect the production performance. This paper proposes Bayesian inference for throughput modeling under five production uncertainties. Bayesian model utilized prior distributions related to previous information about the uncertainties where likelihood distributions are associated to the observed data. Gibbs sampling algorithm as the robust procedure of Monte Carlo Markov chain was employed for sampling unknown parameters and estimating the posterior mean of uncertainties. The Bayesian model was validated with respect to convergence and efficiency of its outputs. The results presented that the proposed Bayesian models were capable to predict the production throughput with accuracy of 98.3%.
Abstract: In this study, how affects the narrative of Positive
Psychothreapy which is named “The Three Small Gold Statues "the
adloescent-s perception is investigated The sample included 90
adolescents who were high school students. Firstly the narrative was
read. Then three questions which were about the narrative were
asked. The questions were: What kind of things did you recall what
kind of results did you conculde, and also how could you use this
narrative in your real life problems. Responds were analyzed by
content analysis method. According to research findings the narrative
had a great effect for adolescent perceptions, and also the tale could
be used at school counselling programs.
Abstract: This paper features the mathematical modeling of a single input single output based Timoshenko smart beam. Further, this mathematical model is used to design a multirate output feedback based discrete sliding mode controller using Bartoszewicz law to suppress the flexural vibrations. The first 2 dominant vibratory modes is retained. Here, an application of the discrete sliding mode control in smart systems is presented. The algorithm uses a fast output sampling based sliding mode control strategy that would avoid the use of switching in the control input and hence avoids chattering. This method does not need the measurement of the system states for feedback as it makes use of only the output samples for designing the controller. Thus, this methodology is more practical and easy to implement.
Abstract: This paper presents a novel approach for tuning unified power flow controller (UPFC) based damping controller in order to enhance the damping of power system low frequency oscillations. The design problem of damping controller is formulated as an optimization problem according to the eigenvalue-based objective function which is solved using iteration particle swarm optimization (IPSO). The effectiveness of the proposed controller is demonstrated through eigenvalue analysis and nonlinear time-domain simulation studies under a wide range of loading conditions. The simulation study shows that the designed controller by IPSO performs better than CPSO in finding the solution. Moreover, the system performance analysis under different operating conditions show that the δE based controller is superior to the mB based controller.
Abstract: This paper proposes a new parameter identification
method based on Linear Fractional Transformation (LFT). It is
assumed that the target linear system includes unknown parameters.
The parameter deviations are separated from a nominal system via
LFT, and identified by organizing I/O signals around the separated
deviations of the real system. The purpose of this paper is to apply LFT
to simultaneously identify the parameter deviations in systems with
fewer outputs than unknown parameters. As a fundamental example,
this method is implemented to one degree of freedom vibratory system.
Via LFT, all physical parameters were simultaneously identified in this
system. Then, numerical simulations were conducted for this system to
verify the results. This study shows that all the physical parameters of a
system with fewer outputs than unknown parameters can be effectively
identified simultaneously using LFT.
Abstract: Fluids are used for heat transfer in many engineering
equipments. Water, ethylene glycol and propylene glycol are some
of the common heat transfer fluids. Over the years, in an attempt to
reduce the size of the equipment and/or efficiency of the process,
various techniques have been employed to improve the heat transfer
rate of these fluids. Surface modification, use of inserts and
increased fluid velocity are some examples of heat transfer
enhancement techniques. Addition of milli or micro sized particles
to the heat transfer fluid is another way of improving heat transfer
rate. Though this looks simple, this method has practical problems
such as high pressure loss, clogging and erosion of the material of
construction. These problems can be overcome by using nanofluids,
which is a dispersion of nanosized particles in a base fluid.
Nanoparticles increase the thermal conductivity of the base fluid
manifold which in turn increases the heat transfer rate. In this work,
the heat transfer enhancement using aluminium oxide nanofluid has
been studied by computational fluid dynamic modeling of the
nanofluid flow adopting the single phase approach.
Abstract: Methods to detect and localize time singularities of polynomial and quasi-polynomial ordinary differential equations are systematically presented and developed. They are applied to examples taken form different fields of applications and they are also compared to better known methods such as those based on the existence of linear first integrals or Lyapunov functions.