Abstract: Adolescents in Northern Uganda are at risk of teenage
pregnancies, unsafe abortions and sexually transmitted infections
(STIs). There is silence on sex both at home and school. This cross
sectional descriptive analytical study interviews a random sample of
827 students and 13 teachers on knowledge, perception and
acceptability to a comprehensive adolescent sexual and reproductive
health education in “O” and “A” level secondary schools in Gulu
District. Quantitative data was analyzed using SPSS 16.0. Directed
content analysis of themes of transcribed qualitative data was
conducted manually for common codes, sub-categories and
categories. Of the 827 students; 54.3% (449) reported being in a
sexual relationship especially those aged 15-17 years. Majority
96.1% (807) supported the teaching of a comprehensive ASRHE,
citing no negative impact 71.5% (601). Majority 81.6% (686) agreed
that such education could help prevention of STIs, abortions and
teenage pregnancies, and that it should be taught by health workers
69.0% (580). Majority 76.6% (203) reported that ASRHE was not
currently being taught in their schools. Students had low knowledge
levels and misconceptions about ASRHE. ASRHE was highly
acceptable though not being emphasized; its success in school
settings requires multidisciplinary culturally sensitive approaches
amongst which health workers should be frontiers.
Abstract: In order to meet the limits imposed on automotive
emissions, engine control systems are required to constrain air/fuel
ratio (AFR) in a narrow band around the stoichiometric value, due to
the strong decay of catalyst efficiency in case of rich or lean mixture.
This paper presents a model of a sample spark ignition engine and
demonstrates Simulink-s capabilities to model an internal combustion
engine from the throttle to the crankshaft output. We used welldefined
physical principles supplemented, where appropriate, with
empirical relationships that describe the system-s dynamic behavior
without introducing unnecessary complexity. We also presents a PID
tuning method that uses an adaptive fuzzy system to model the
relationship between the controller gains and the target output
response, with the response specification set by desired percent
overshoot and settling time. The adaptive fuzzy based input-output
model is then used to tune on-line the PID gains for different
response specifications. Experimental results demonstrate that better
performance can be achieved with adaptive fuzzy tuning relative to
similar alternative control strategies. The actual response
specifications with adaptive fuzzy matched the desired response
specifications.
Abstract: This research aimed to study employees- perceptions and expectations toward their organization-s corporate social responsibility (CSR), to study the differences between employees- personal factors and level of perceptions and expectations toward CSR, and to study the relationship between employees- perceptions and expectations toward CSR. Purposive sampling and questionnaire were applied to collect information from 400 private company employees in Bangkok metropolitan area. The results revealed that employees had “high" level of perceptions and expectations toward CSR, of which the highest level were given on the area of “corporate governance and transparency". It was found that there was different level of expectations of employees with different period of employment, position and employment (by listed and non-listed companies). Employees of different age and period of employment also had different level of expectations. Employees- perceptions were correlated with their expectations toward CSR.
Abstract: In this paper, we evaluate the choice of suitable
quantization characteristics for both the decoder messages and the
received samples in Low Density Parity Check (LDPC) coded
systems using M-QAM (Quadrature Amplitude Modulation)
schemes. The analysis involves the demapper block that provides
initial likelihood values for the decoder, by relating its quantization
strategy of the decoder. A mapping strategy refers to the grouping of
bits within a codeword, where each m-bit group is used to select a
2m-ary signal in accordance with the signal labels. Further we
evaluate the system with mapping strategies like Consecutive-Bit
(CB) and Bit-Reliability (BR). A new demapper version, based on
approximate expressions, is also presented to yield a low complexity
hardware implementation.
Abstract: Multiparty voice over IP (MVoIP) systems allows a group of people to freely communicate each other via the internet, which have many applications such as online gaming, teleconferencing, online stock trading etc. Peertalk is a peer to peer multiparty voice over IP system (MVoIP) which is more feasible than existing approaches such as p2p overlay multicast and coupled distributed processing. Since the stream mixing and distribution are done by the peers, it is vulnerable to major security threats like nodes misbehavior, eavesdropping, Sybil attacks, Denial of Service (DoS), call tampering, Man in the Middle attacks etc. To thwart the security threats, a security framework called PEERTS (PEEred Reputed Trustworthy System for peertalk) is implemented so that efficient and secure communication can be carried out between peers.
Abstract: A novel three-phase active power filter (APF) circuit with photovoltaic (PV) system to improve the quality of service and to reduce the capacity of energy storage capacitor is presented. The energy balance concept and sampling technique were used to simplify the calculation algorithm for the required utility source current and to control the voltage of the energy storage capacitor. The feasibility was verified by using the Pspice simulations and experiments. When the APF mode was used during non-operational period, not only the utilization rate, power factor and power quality could be improved, but also the capacity of energy storage capacitor could sparing. As the results, the advantages of the APF circuit are simplicity of control circuits, low cost, and good transient response.
Abstract: In general fuzzy sets are used to analyze the fuzzy
system reliability. Here intuitionistic fuzzy set theory for analyzing
the fuzzy system reliability has been used. To analyze the fuzzy
system reliability, the reliability of each component of the system as
a triangular intuitionistic fuzzy number is considered. Triangular
intuitionistic fuzzy number and their arithmetic operations are
introduced. Expressions for computing the fuzzy reliability of a
series system and a parallel system following triangular intuitionistic
fuzzy numbers have been described. Here an imprecise reliability
model of an electric network model of dark room is taken. To
compute the imprecise reliability of the above said system, reliability
of each component of the systems is represented by triangular
intuitionistic fuzzy numbers. Respective numerical example is
presented.
Abstract: The issue of leadership has been investigated from
several perspectives; however, very less from ethical perspective.
With the growing number of corporate scandals and unethical roles
played by business leaders in several parts of the world, the need to
examine leadership from ethical perspective cannot be over
emphasized. The importance of leadership credibility has been
discussed in the authentic model of leadership. Authentic leaders
display high degree of integrity, have deep sense of purpose, and
committed to their core values. As a result they promote a more
trusting relationship in their work groups that translates into several
positive outcomes. The present study examined how authentic
leadership contribute to subordinates- trust in leadership and how this
trust, in turn, predicts subordinates- work engagement. A sample of
395 employees was randomly selected from several local banks
operating in Malaysia. Standardized tools such as ALQ, OTI, and
EEQ were employed. Results indicated that authentic leadership
promoted subordinates- trust in leader, and contributed to work
engagement. Also, interpersonal trust predicted employees- work
engagement as well as mediated the relationship between this style of
leadership and employees- work engagement.
Abstract: This study investigated the use of modified
atmosphere packaging (MAP) and different packaging to extend the
shelf life of Barbari flat bread. Three atmospheres including 70%CO2
and 30%N2, 50% CO2 and 50%N2 and a normal air as control were
used. The bread samples were packaged in three type pouches. The
shelf life was determined by appearance of mold and yeast (M +Y) in
Barbari bread samples stored at 25 ± 1°C and 38 ± 2% relative
humidity. The results showed that it is possible to prolong the shelf
life of Barbari bread from four days to about 21 days by using
modified atmosphere packaging with high carbon dioxide
concentration and high-barrier laminated and vacuum bags packages.
However, the hardness of samples kept in MAP increase significantly
by increase of carbon dioxide concentration. The correlation
coefficient (r) between headspace CO2 concentration and hardness
was 0.997, 0.997 and 0.599 for A, B and C packaging respectively.
High negative correlation coefficients were found between the crumb
moisture and the hardness values in various packaging. There were
significant negative correlation coefficients between sensory
parameters and hardness of texture.
Abstract: The fabrication of porous NiTi shape memory alloys (SMAs) from elemental powder compacts was conducted by selfpropagating high temperature synthesis (SHS). Effects of the preheating temperature and the chamber pressure on the combustion characteristics as well as the final morphology and the composition of products were studied. The samples with porosity between 56.4 and 59.0% under preheating temperature in the range of 200-300°C and Ar-gas chamber pressure of 138 and 201 kPa were obtained. The pore structures were found to be dissimilar only in the samples processed with different preheating temperature. The major phase in the porous product is NiTi with small amounts of secondary phases, NiTi2 and Ni4Ti3. The preheating temperature and the chamber pressure have very little effect on the phase constituent. While the combustion temperature of the sample was notably increased by increasing the preheating temperature, they were slightly changed by varying the chamber pressure.
Abstract: Study of the vibration cylindrical shells made of
a functionally gradient material (FGM) composed of stainless
steel and nickel is important. Material properties are graded in
the thickness direction of the shell according to volume
fraction power law distribution. The objective is to study the
natural frequencies, the influence of constituent volume
fractions and the effects of boundary conditions on the natural
frequencies of the FG cylindrical shell. The study is carried
out using third order shear deformation shell theory. The
governing equations of motion of FG cylindrical shells are
derived based on shear deformation theory. Results are
presented on the frequency characteristics, influence of
constituent volume fractions and the effects of clampedclamped
boundary conditions.
Abstract: Regarding previous research studies it was concluded
that thin-walled fiber-cement composites are able to conduct electric
current under specific conditions. This property is ensured by using
of various kinds of carbon materials. Though carbon fibers are less
conductive than metal fibers, composites with carbon fibers were
evaluated as better current conductors than the composites with metal
fibers. The level of electric conductivity is monitored by the means of
impedance measurement of designed samples. These composites
could be used for a range of applications such as heating of
trafficable surfaces or shielding of electro-magnetic fields.
The aim of the present research was to design an element with the
ability to monitor internal processes in building structures and
prevent them from collapsing. As a typical element for laboratory
testing there was chosen a concrete column, which was repeatedly
subjected to load by simple pressure with continual monitoring of
changes in electrical properties.
Abstract: Information on weed distribution within the field is
necessary to implement spatially variable herbicide application.
Since hand labor is costly, an automated weed control system could be
feasible. This paper deals with the development of an algorithm for
real time specific weed recognition system based on Histogram
Analysis of an image that is used for the weed classification. This
algorithm is specifically developed to classify images into broad and
narrow class for real-time selective herbicide application. The
developed system has been tested on weeds in the lab, which have
shown that the system to be very effectiveness in weed identification.
Further the results show a very reliable performance on images of
weeds taken under varying field conditions. The analysis of the results
shows over 95 percent classification accuracy over 140 sample images
(broad and narrow) with 70 samples from each category of weeds.
Abstract: The mitigation of crop loss due to damaging freezes
requires accurate air temperature prediction models. Previous work
established that the Ward-style artificial neural network (ANN) is a
suitable tool for developing such models. The current research
focused on developing ANN models with reduced average prediction
error by increasing the number of distinct observations used in
training, adding additional input terms that describe the date of an
observation, increasing the duration of prior weather data included in
each observation, and reexamining the number of hidden nodes used
in the network. Models were created to predict air temperature at
hourly intervals from one to 12 hours ahead. Each ANN model,
consisting of a network architecture and set of associated parameters,
was evaluated by instantiating and training 30 networks and
calculating the mean absolute error (MAE) of the resulting networks
for some set of input patterns. The inclusion of seasonal input terms,
up to 24 hours of prior weather information, and a larger number of
processing nodes were some of the improvements that reduced
average prediction error compared to previous research across all
horizons. For example, the four-hour MAE of 1.40°C was 0.20°C, or
12.5%, less than the previous model. Prediction MAEs eight and 12
hours ahead improved by 0.17°C and 0.16°C, respectively,
improvements of 7.4% and 5.9% over the existing model at these
horizons. Networks instantiating the same model but with different
initial random weights often led to different prediction errors. These
results strongly suggest that ANN model developers should consider
instantiating and training multiple networks with different initial
weights to establish preferred model parameters.
Abstract: Elastic light single-scattering spectroscopy system
with a single optical fiber probe was employed to differentiate cancerous prostate tissue from non-cancerous prostate tissue ex-vivo just after radical prostatectomy. First, ELSSS spectra were acquired
from cancerous prostate tissue to define its spectral features. Then,
spectra were acquired from normal prostate tissue to define difference in spectral features between the cancerous and normal
prostate tissues. Of the total 66 tissue samples were evaluated from
nine patients by ELSSS system. Comparing of histopathology results
and ELSSS measurements revealed that sign of the spectral slopes of
cancerous prostate tissue is negative and non-cancerous tissue is positive in the wavelength range from 450 to 750 nm. Based on the
correlation between histopathology results and sign of the spectral
slopes, ELSSS system differentiates cancerous prostate tissue from
non- cancerous with a sensitivity of 0.95 and a specificity of 0.94.
Abstract: In this paper, we establish several oscillation criteria for the nonlinear second-order damped delay dynamic equation r(t)|xΔ(t)|β-1xΔ(t)Δ + p(t)|xΔσ(t)|β-1xΔσ(t) + q(t)f(x(τ (t))) = 0 on an arbitrary time scale T, where β > 0 is a constant. Our results generalize and improve some known results in which β > 0 is a quotient of odd positive integers. Some examples are given to illustrate our main results.
Abstract: The Brazilian Agricultural Products Wholesale Market fits well as example of residues generating system, reaching 750 metric tons per month of total residues, from which 600 metric tons are organic material and 150 metric tons are recyclable materials. Organic material is basically composed of fruit, vegetables and flowers leftovers from the products commercialization. The recyclable compounds are generate from packing material employed in the commercialization process. This research work devoted efforts in carrying quantitative analysis of the residues generated in the agricultural enterprise at its final destination. Data survey followed the directions implemented by the Residues Management Program issued by the agricultural enterprise. It was noticed from that analysis the necessity of changing the logistics applied to the recyclable material collecting process. However, composting process was elected as the organic compounds destination which is considered adequate for a material composed of significant percentage of organic matter far higher than wood, cardboard and plastics contents.
Abstract: This study compared socio-economic status attainment between the Muslim and Santal couples in rural Bangladesh. For this we hypothesized that socio-economic status attainment (occupation, education and income) of the Muslim couples was higher than the Santal ones in rural Bangladesh. In order to examine the hypothesis 288 couples (145 couples for Muslim and 143 couples for Santal) selected by cluster random sampling from Kalna village, Bangladesh were individually interviewed with semistructured questionnaire method. The results of Pearson Chi-Squire test suggest that there were significant differences in socio-economic status attainment between the two communities- couples. In addition, Pearson correlation coefficients also suggest that there were significant associations between the socio-economic statuses attained by the two communities- couples in rural Bangladesh. Further crosscultural study should conduct on how inter-community relations in rural social structure of Bangladesh influence the differences among the couples- socio-economic status attainment
Abstract: In the various working field, vibration may cause injurious to human body. Especially, in case of the vibration which is constantly and repeatedly transferred to the human. That gives serious physical problem, so called, Reynaud phenomenon. In this paper, we propose a vibration transmissibility reduction module with flexure mechanism for personal tools. At first, we select a target personal tool, grass cutter, and measure the level of vibration transmissibility on the hand. And then, we develop the concept design of the module that has stiffness for reduction the vibration transmissibility more than 20%, where the vibration transmissibility is measured with an accelerometer. In addition, the vibration reduction can be enhanced when the interior gap between inner and outer body is filled with silicone gel. This will be verified by the further experiment.
Abstract: This study discusses the stumbling blocks stifling the
adoption of GPS technology in the public sector of Pakistan. This
study has been carried out in order to describe the value of GPS
technology and its adoption at various public sector organisations in
Pakistan. Sample size for the research conducted was 200; personnel
working in public sector having age above 29 years were surveyed.
Data collected for this research has been quantitatively analysed with
the help of SPSS. Regression analysis, correlation and cross
tabulation were the techniques used to determine the strength of
relationship between key variables. Findings of this research indicate
that main hurdles in GPS adoption in the public sector of Pakistan are
lack of awareness about GPS among masses in general and the
stakeholders in particular, lack of initiative on part of government in
promoting new technologies, unavailability of GPS infrastructure in
Pakistan and prohibitions on map availability because of security
reasons.