Abstract: Drilling is the most common machining operation and it forms the highest machining cost in many manufacturing activities including automotive engine production. The outcome of this operation depends upon many factors including utilization of proper cutting tool geometry, cutting tool material and the type of coating used to improve hardness and resistance to wear, and also cutting parameters. With the availability of a large array of tool geometries, materials and coatings, is has become a challenging task to select the best tool and cutting parameters that would result in the lowest machining cost or highest profit rate. This paper describes an algorithm developed to help achieve good performances in drilling operations by automatically determination of proper cutting tools and cutting parameters. It also helps determine machining sequences resulting in minimum tool changes that would eventually reduce machining time and cost where multiple tools are used.
Abstract: This paper describes an effective solution to the task
of a remote monitoring of super-extended objects (oil and gas
pipeline, railways, national frontier). The suggested solution is based
on the principle of simultaneously monitoring of seismoacoustic and
optical/infrared physical fields. The principle of simultaneous
monitoring of those fields is not new but in contrast to the known
solutions the suggested approach allows to control super-extended
objects with very limited operational costs. So-called C-OTDR
(Coherent Optical Time Domain Reflectometer) systems are used to
monitor the seismoacoustic field. Far-CCTV systems are used to
monitor the optical/infrared field. A simultaneous data processing
provided by both systems allows effectively detecting and classifying
target activities, which appear in the monitored objects vicinity. The
results of practical usage had shown high effectiveness of the
suggested approach.
Abstract: Attitude Determination (AD) of a spacecraft using the
phase measurements of the Global Navigation Satellite System
(GNSS) is an active area of research. Various attitude determination
algorithms have been developed in yester years for spacecrafts using
different sensors but the last two decades have witnessed a
phenomenal increase in research related with GPS receivers as a
stand-alone sensor for determining the attitude of satellite using the
phase measurements of the signals from GNSS. The GNSS-based
Attitude determination algorithms have been experimented in many
real missions. The problem of AD algorithms using GNSS phase
measurements has two important parts; the ambiguity resolution and
the determining of attitude. Ambiguity resolution is the widely
addressed topic in literature for implementing the AD algorithm
using GNSS phase measurements for achieving the accuracy of
millimeter level. This paper broadly overviews the different
techniques for resolving the integer ambiguities encountered in AD
using GNSS phase measurements.
Abstract: Explosive forming is one of the unconventional
techniques in which, most commonly, the water is used as the
pressure transmission medium. One of the newest methods in
explosive forming is gas detonation forming which uses a normal
shock wave derived of gas detonation, to form sheet metals. For this
purpose a detonation is developed from the reaction of H2+O2
mixture in a long cylindrical detonation tube. The detonation wave
goes through the detonation tube and acts as a blast load on the steel
blank and forms it. Experimental results are compared with a finite
element model; and the comparison of the experimental and
numerical results obtained from strain, thickness variation and
deformed geometry is carried out. Numerical and experimental
results showed approximately 75 – 90 % similarity in formability of
desired shape. Also optimum percent of gas mixture obtained when
we mix 68% H2 with 32% O2.
Abstract: The Spiral development model has been used
successfully in many commercial systems and in a good number of
defense systems. This is due to the fact that cost-effective
incremental commitment of funds, via an analogy of the spiral model
to stud poker and also can be used to develop hardware or integrate
software, hardware, and systems. To support adaptive, semantic
collaboration between domain experts and knowledge engineers, a
new knowledge engineering process, called Spiral_OWL is proposed.
This model is based on the idea of iterative refinement, annotation
and structuring of knowledge base. The Spiral_OWL model is
generated base on spiral model and knowledge engineering
methodology. A central paradigm for Spiral_OWL model is the
concentration on risk-driven determination of knowledge engineering
process. The collaboration aspect comes into play during knowledge
acquisition and knowledge validation phase. Design rationales for the
Spiral_OWL model are to be easy-to-implement, well-organized, and
iterative development cycle as an expanding spiral.
Abstract: To decompose organochlorides by bioremediation, co-culture biohydrogen producer and dehalogenation microorganisms is a useful method. In this study, we combined these two characteristics from a biohydrogen producer, Rhodopseudomonas palustris, and a dehalogenation microorganism, Pseudomonas putida, to enchance halorespiration in R. palustris. The genes encoding cytochrome P450cam system (camC, camA, and camB) from P. putida were expressed in R. palustris with designated expression plasmid. All tested strains were cultured to log phase then presented pentachloroethane (PCA) in media. The vector control strain could degrade PCA about 78% after 16 hours, however, the cytochrome P450cam system expressed strain, CGA-camCAB, could completely degrade PCA in 12 hours. While taking chlorinated aromatic, 3-chlorobenzoate, as sole carbon source or present benzoate as co-substrate, CGA-camCAB presented faster growth rate than vector control strain.
Abstract: The sensitivity of orifice plate metering to disturbed
flow (either asymmetric or swirling) is a subject of great concern to
flow meter users and manufacturers. The distortions caused by pipe
fittings and pipe installations upstream of the orifice plate are major
sources of this type of non-standard flows. These distortions can alter
the accuracy of metering to an unacceptable degree. In this work, a
multi-scale object known as metal foam has been used to generate a
predetermined turbulent flow upstream of the orifice plate. The
experimental results showed that the combination of an orifice plate
and metal foam flow conditioner is broadly insensitive to upstream
disturbances. This metal foam demonstrated a good performance in
terms of removing swirl and producing a repeatable flow profile
within a short distance downstream of the device. The results of using
a combination of a metal foam flow conditioner and orifice plate for
non-standard flow conditions including swirling flow and asymmetric
flow show this package can preserve the accuracy of metering up to
the level required in the standards.
Abstract: Amongst the consistently fluctuating conditions
prevailing today, changeability represents a strategic key factor for a
manufacturing company to achieve success on the international
markets. In order to cope with turbulences and the increasing level of
incalculability, not only the flexible design of production systems but
in particular the employee as enabler of change provide the focus
here. It is important to enable employees from manufacturing
companies to participate actively in change events and in change
decisions. To this end, the learning factory has been created, which is
intended to serve the development of change-promoting competences
and the sensitization of employees for the necessity of changes.
Abstract: Face recognition is a technique to automatically
identify or verify individuals. It receives great attention in
identification, authentication, security and many more applications.
Diverse methods had been proposed for this purpose and also a lot of
comparative studies were performed. However, researchers could not
reach unified conclusion. In this paper, we are reporting an extensive
quantitative accuracy analysis of four most widely used face
recognition algorithms: Principal Component Analysis (PCA),
Independent Component Analysis (ICA), Linear Discriminant
Analysis (LDA) and Support Vector Machine (SVM) using AT&T,
Sheffield and Bangladeshi people face databases under diverse
situations such as illumination, alignment and pose variations.
Abstract: Soils are normally dried in either a convection oven or stove. Laboratory moisture content testing indicated that the typical drying durations for a convection oven were, 24 hours. The purpose of this study was to determine the accuracy and soil drying duration of both, moisture content and liquid limit using microwave radiation. The soils were tested with both, convection and microwave ovens. The convection oven was considered to produce the true values for both, natural moisture content and liquid limit of soils; it was, therefore, used as a basis for comparison for the results of the microwave ovens. The samples used in this study were obtained from different projects of Consulting Engineering Bureau of College of Engineering of Sulaimani University. These samples were collected from different locations and at the different depths and consist mostly of brown and light brown clay and silty clay. A total of 102 samples were prepared. 26 of them were tested for natural moisture determination, while the other 76 were used for liquid limits determination
Abstract: The purpose of this study is to analyze the islands
tourist travel information sources, as well as for the satisfaction of the
tourist destination services. This study used questionnaires to the
island of Taiwan to the Penghu Islands to engage in tourism activities
tourist adopt the designated convenience sampling method, a total of
889 valid questionnaires were collected. After statistical analysis, this
study found that: 1. tourists to the Penghu Islands travel information
source for “friends and family came to Penghu". 2. Tourists feel the
service of the outlying islands of Penghu, the highest feelings of
“friendly local residents". 3. There are different demographic variables
affect the tourist travel information source and service satisfaction.
Based on the findings of this study not only for Penghu's tourism
industry with the unit in charge of the proposed operating and
suggestions for future research to other researchers.
Abstract: Security issue and the importance of the function of
police to provide practical and psychological contexts in the
community has been the main topics among researchers , police and
security circles and this subject require to review and analysis
mechanisms within the police and its interaction with other parts of
the system for providing community safety. This paper examine
national and social security in the Internet.
Abstract: Querying a data source and routing data towards sink
becomes a serious challenge in static wireless sensor networks if sink
and/or data source are mobile. Many a times the event to be observed
either moves or spreads across wide area making maintenance of
continuous path between source and sink a challenge. Also, sink can
move while query is being issued or data is on its way towards sink.
In this paper, we extend our already proposed Grid Based Data
Dissemination (GBDD) scheme which is a virtual grid based
topology management scheme restricting impact of movement of
sink(s) and event(s) to some specific cells of a grid. This obviates the
need for frequent path modifications and hence maintains continuous
flow of data while minimizing the network energy consumptions.
Simulation experiments show significant improvements in network
energy savings and average packet delay for a packet to reach at sink.
Abstract: Vacuum membrane distillation (VMD) process can be
used for water purification or the desalination of salt water. The
process simply consists of a flat sheet hydrophobic micro porous
PTFE membrane and diaphragm vacuum pump without a condenser
for the water recovery or trap. The feed was used aqueous NaCl
solution. The VMD experiments were performed to evaluate the heat
and mass transfer coefficient of the boundary layer in a membrane
module. The only operating parameters are feed inlet temperature,
and feed flow rate were investigated. The permeate flux was strongly
affected by the feed inlet temperature, feed flow rate, and boundary
layer heat transfer coefficient. Since lowering the temperature
polarization coefficient is essential enhance the process performance
considerable and maximizing the heat transfer coefficient for
maximizes the mass flux of distillate water. In this paper, the results
of VMD experiments are used to measure the boundary layer heat
transfer coefficient, and the experimental results are used to reevaluate
the empirical constants in the Dittus- Boelter equation.
Abstract: Image synthesis is an important area in image processing.
To synthesize images various systems are proposed in
the literature. In this paper, we propose a bio-inspired system to
synthesize image and to study the generating power of the system, we
define the class of languages generated by our system. We call image
as array in this paper. We use a primitive called iso-array to synthesize
image/array. The operation is double splicing on iso-arrays. The
double splicing operation is used in DNA computing and we use
this to synthesize image. A comparison of the family of languages
generated by the proposed self restricted double splicing systems on
iso-arrays with the existing family of local iso-picture languages is
made. Certain closure properties such as union, concatenation and
rotation are studied for the family of languages generated by the
proposed model.
Abstract: In this paper, an improved technique for contingency
ranking using artificial neural network (ANN) is presented. The
proposed approach is based on multi-layer perceptrons trained by
backpropagation to contingency analysis. Severity indices in dynamic
stability assessment are presented. These indices are based on the
concept of coherency and three dot products of the system variables.
It is well known that some indices work better than others for a
particular power system. This paper along with test results using
several different systems, demonstrates that combination of indices
with ANN provides better ranking than a single index. The presented
results are obtained through the use of power system simulation
(PSS/E) and MATLAB 6.5 software.
Abstract: Cell phone forensics to acquire and analyze data in the
cellular phone is nowadays being used in a national investigation
organization and a private company. In order to collect cellular phone
flash memory data, we have two methods. Firstly, it is a logical
method which acquires files and directories from the file system of the
cell phone flash memory. Secondly, we can get all data from bit-by-bit
copy of entire physical memory using a low level access method. In
this paper, we describe a forensic tool to acquire cell phone flash
memory data using a logical level approach. By our tool, we can get
EFS file system and peek memory data with an arbitrary region from
Korea CDMA cell phone.
Abstract: A new approach for facial expressions recognition based on face context and adaptively weighted sub-pattern PCA (Aw-SpPCA) has been presented in this paper. The facial region and others part of the body have been segmented from the complex environment based on skin color model. An algorithm has been proposed to accurate detection of face region from the segmented image based on constant ratio of height and width of face (δ= 1.618). The paper also discusses on new concept to detect the eye and mouth position. The desired part of the face has been cropped to analysis the expression of a person. Unlike PCA based on a whole image pattern, Aw-SpPCA operates directly on its sub patterns partitioned from an original whole pattern and separately extracts features from them. Aw-SpPCA can adaptively compute the contributions of each part and a classification task in order to enhance the robustness to both expression and illumination variations. Experiments on single standard face with five types of facial expression database shows that the proposed method is competitive.
Abstract: There have been widespread applications of fluidized beds in industries which are related to the combination of gas-solid particles during the last decade. For instance, in order to crack the catalyses in petrochemical industries or as a drier in food industries. High capacity of fluidized bed in heat and mass transfer has made this device very popular. In order to achieve a higher efficiency of fluidized beds, a particular attention has been paid to beds with pulsating air flow. In this paper, a fluidized bed device with pulsating flow has been designed and constructed. Size of particles have been used during the test are in the range of 40 to 100μm. The purpose of this experimental test is to investigate the air flow regime, observe the particles- movement and measure the pressure loss along the bed. The effects of pulsation can be evaluated by comparing the results for both continuous and pulsating flow. Results of both situations are compared for various gas speeds. Moreover the above experiment is numerically simulated by using Fluent software and its numerical results are compared with the experimental results.
Abstract: The population structure of the Tor tambroides was
investigated with morphometric data (i.e. morphormetric
measurement and truss measurement). A morphometric analysis was
conducted to compare specimens from three waterfalls: Sunanta, Nan
Chong Fa and Wang Muang waterfalls at Khao Nan National Park,
Nakhon Si Thammarat, Southern Thailand. The results of stepwise
discriminant analysis on seven morphometric variables and 21 truss
variables per individual were the same as from a neural network. Fish
from three waterfalls were separated into three groups based on their
morphometric measurements. The morphometric data shows that the
nerual network model performed better than the stepwise
discriminant analysis.