Abstract: Comparing other methods of waste water treatment,
constructed wetlands are one of the most fascinating practices
because being a natural process they are eco-friendly have low
construction and maintenance cost and have considerable capability
of wastewater treatment. The current research was focused mainly on
comparison of Ranunculus muricatus and Typha latifolia as wetland
plants for domestic wastewater treatment by designing and
constructing efficient pilot scale horizontal subsurface flow
mesocosms. Parameters like chemical oxygen demand, biological
oxygen demand, phosphates, sulphates, nitrites, nitrates, and
pathogenic indicator microbes were studied continuously with
successive treatments. Treatment efficiency of the system increases
with passage of time and with increase in temperature. Efficiency of
T. latifolia planted setups in open environment was fairly good for
parameters like COD and BOD5 which was showing reduction up to
82.5% for COD and 82.6% for BOD5 while DO was increased up to
125%. Efficiency of R. muricatus vegetated setup was also good but
lowers than that of T. latifolia planted showing 80.95% removal of
COD and BOD5. Ranunculus muricatus was found effective in
reducing bacterial count in wastewater. Both macrophytes were
found promising in wastewater treatment.
Abstract: In this paper we are presenting some spamming
techniques their behaviour and possible solutions. We have analyzed
how Spammers enters into online social networking sites (OSNSs) to
target them and diverse techniques used by them for this purpose.
Spamming is very common issue in present era of Internet
especially through Online Social Networking Sites (like Facebook,
Twitter, and Google+ etc.). Spam messages keep wasting Internet
bandwidth and the storage space of servers. On social networking
sites; spammers often disguise themselves by creating fake accounts
and hijacking user’s accounts for personal gains. They behave like
normal user and they continue to change their spamming strategy.
Following spamming techniques are discussed in this paper like
clickjacking, social engineered attacks, cross site scripting, URL
shortening, and drive by download. We have used elgg framework
for demonstration of some of spamming threats and respective
implementation of solutions.
Abstract: Despite the highly touted benefits, emerging
technologies have unleashed pervasive concerns regarding unintended
and unforeseen social impacts. Thus, those wishing to create safe and
socially acceptable products need to identify such side effects and
mitigate them prior to the market proliferation. Various methodologies
in the field of technology assessment (TA), namely Delphi, impact
assessment, and scenario planning, have been widely incorporated in
such a circumstance. However, literatures face a major limitation in
terms of sole reliance on participatory workshop activities. They
unfortunately missed out the availability of a massive untapped data
source of futuristic information flooding through the Internet. This
research thus seeks to gain insights into utilization of futuristic data,
future-oriented documents from the Internet, as a supplementary
method to generate social impact scenarios whilst capturing
perspectives of experts from a wide variety of disciplines. To this end,
network analysis is conducted based on the social keywords extracted
from the futuristic documents by text mining, which is then used as a
guide to produce a comprehensive set of detailed scenarios. Our
proposed approach facilitates harmonized depictions of possible
hazardous consequences of emerging technologies and thereby makes
decision makers more aware of, and responsive to, broad qualitative
uncertainties.
Abstract: One of the best examples, in evolution of the public
procurement, from post-soviet countries are reforms carried out in
Georgia, which brought them close to international standards of
procurement. In Georgia, public procurement legislation started
functioning short after gaining independence. The reform has passed
several stages and came in the form as it is today. It should also be
noted, that countries with economy in transition, including Georgia,
implemented all the reforms in public procurement based on
recommendations and support of World Bank, the United Nations
and other international organizations.
The aim of first adopted law was regulation of the procurement
process of budget-organizations, transparency and creation of
competitive environment for private companies to access state funds
legally. The priorities were identified quite clearly in the wording of
the law, but operation/function of this law could not be reached on its
level, because of some objective and subjective reasons. The high
level of corruption in all levels of governance can be considered as a
main obstacle reason and of course, it is natural, that it had direct
impact on the procurement process, as well as on transparency and
rational use of state funds. These circumstances were the reasons that
reforms in this sphere continued, to improve procurement process, in
particular, the first wave of reforms began after several years. Public
procurement agency carried out reform with World Bank with main
purpose of smartening the procurement legislation and its
harmonization with international treaties and agreements. Also with
the support of World Bank various activities were carried out to raise
awareness of participants involved in procurement system.
Further major changes in the legislation were filed bit later, which
was also directed towards the improvement and smarten of the
procurement process. The third wave of the reform more or less
guaranteed the transparency of the procurement process, which later
became the basis for the rational spending of state funds. The reform
of the procurement system completely changed the procedures.
Carried out reform in Georgia resulted in introducing new
electronic tendering system, which benefit the transparency of the
process, after this became the basis for the further development of a
competitive environment, which become a prerequisite for the state
rational spending. Increased number of supplier organizations
participating in the procurement process resulted in reduction of the
estimated cost and the actual cost.
Assessment of the reforms in Georgia in the field of public
procurement can be concluded, that proper regulation of the sector
and relevant policy may proceed to rational and transparent spending
of the budget from country’s state institutions. Also, the business
sector has the opportunity to work in competitive market conditions
and to make a preliminary analysis, which is a prerequisite for future
strategy and development.
Abstract: Pulmonary Function Tests are important non-invasive
diagnostic tests to assess respiratory impairments and provides
quantifiable measures of lung function. Spirometry is the most
frequently used measure of lung function and plays an essential role
in the diagnosis and management of pulmonary diseases. However,
the test requires considerable patient effort and cooperation,
markedly related to the age of patients resulting in incomplete data
sets. This paper presents, a nonlinear model built using Multivariate
adaptive regression splines and Random forest regression model to
predict the missing spirometric features. Random forest based feature
selection is used to enhance both the generalization capability and the
model interpretability. In the present study, flow-volume data are
recorded for N= 198 subjects. The ranked order of feature importance
index calculated by the random forests model shows that the
spirometric features FVC, FEF25, PEF, FEF25-75, FEF50 and the
demographic parameter height are the important descriptors. A
comparison of performance assessment of both models prove that, the
prediction ability of MARS with the `top two ranked features namely
the FVC and FEF25 is higher, yielding a model fit of R2= 0.96 and
R2= 0.99 for normal and abnormal subjects. The Root Mean Square
Error analysis of the RF model and the MARS model also shows that
the latter is capable of predicting the missing values of FEV1 with a
notably lower error value of 0.0191 (normal subjects) and 0.0106
(abnormal subjects) with the aforementioned input features. It is
concluded that combining feature selection with a prediction model
provides a minimum subset of predominant features to train the
model, as well as yielding better prediction performance. This
analysis can assist clinicians with a intelligence support system in the
medical diagnosis and improvement of clinical care.
Abstract: The Malaysian government had consistently revived
its campaign for “Buy Malaysian Goods” from time to time. The
purpose of the campaign is to remind consumers to be ethnocentric
and patriotic when purchasing product and services. This is necessary
to ensure high demand for local products and services compared to
foreign products. However, the decline of domestic investment in
2012 has triggered concern for the Malaysian economy. Hence, this
study attempts to determine the drivers of actual purchasing behavior,
intention to purchase domestic products and ethnocentrism. The
study employs the cross-sectional primary data, self-administered on
household, selected using stratified random sampling in four
Malaysian regions. A nine factor driver of actual domestic purchasing
behavior (culture openness, conservatism, collectivism, patriotism,
control belief, interest in foreign travel, attitude, ethnocentrism and
intention) were measured utilizing 60 items, using 7-point Likertscale.
From 1000 questionnaires distributed, a sample of 486 were
returned representing 48.6 percent response rate. From the fit
generated structural model (SEM analysis), it was found that the
drivers of actual purchase behavior are collectivism, cultural
openness and patriotism; the drivers of intention to purchase
domestic product are attitude, control belief, collectivism and
conservatism; and drivers of ethnocentrism are cultural openness,
control belief, foreign travel and patriotism. It also shows that
Malaysian consumers scored high in ethnocentrism and patriotism.
The findings are discussed in the perspective of its implication to
Malaysian National Agenda.
Abstract: Over the past four decades, the fatigue behavior of
nickel-based alloys has been widely studied. However, in recent
years, significant advances in the fabrication process leading to grain
size reduction have been made in order to improve fatigue properties
of aircraft turbine discs. Indeed, a change in particle size affects the
initiation mode of fatigue cracks as well as the fatigue life of the
material. The present study aims to investigate the fatigue behavior of
a newly developed nickel-based superalloy under biaxial-planar
loading. Low Cycle Fatigue (LCF) tests are performed at different
stress ratios so as to study the influence of the multiaxial stress state
on the fatigue life of the material. Full-field displacement and strain
measurements as well as crack initiation detection are obtained using
Digital Image Correlation (DIC) techniques. The aim of this
presentation is first to provide an in-depth description of both the
experimental set-up and protocol: the multiaxial testing machine, the
specific design of the cruciform specimen and performances of the
DIC code are introduced. Second, results for sixteen specimens
related to different load ratios are presented. Crack detection, strain
amplitude and number of cycles to crack initiation vs. triaxial stress
ratio for each loading case are given. Third, from fractographic
investigations by scanning electron microscopy it is found that the
mechanism of fatigue crack initiation does not depend on the triaxial
stress ratio and that most fatigue cracks initiate from subsurface
carbides.
Abstract: The detection of moving objects from a video image
sequences is very important for object tracking, activity recognition,
and behavior understanding in video surveillance.
The most used approach for moving objects detection / tracking is
background subtraction algorithms. Many approaches have been
suggested for background subtraction. But, these are illumination
change sensitive and the solutions proposed to bypass this problem
are time consuming.
In this paper, we propose a robust yet computationally efficient
background subtraction approach and, mainly, focus on the ability to
detect moving objects on dynamic scenes, for possible applications in
complex and restricted access areas monitoring, where moving and
motionless persons must be reliably detected. It consists of three
main phases, establishing illumination changes invariance,
background/foreground modeling and morphological analysis for
noise removing.
We handle illumination changes using Contrast Limited Histogram
Equalization (CLAHE), which limits the intensity of each pixel to
user determined maximum. Thus, it mitigates the degradation due to
scene illumination changes and improves the visibility of the video
signal. Initially, the background and foreground images are extracted
from the video sequence. Then, the background and foreground
images are separately enhanced by applying CLAHE.
In order to form multi-modal backgrounds we model each channel
of a pixel as a mixture of K Gaussians (K=5) using Gaussian Mixture
Model (GMM). Finally, we post process the resulting binary
foreground mask using morphological erosion and dilation
transformations to remove possible noise.
For experimental test, we used a standard dataset to challenge the
efficiency and accuracy of the proposed method on a diverse set of
dynamic scenes.
Abstract: In this work, we report, a systematic study on the
structural and optical properties of Pr-doped ZnO nanostructures and
PVA:Zn98Pr2O polymer matrix nanocomposites free standing films.
These particles are synthesized through simple wet chemical route
and solution casting technique at room temperature, respectively.
Structural studies carried out by X-ray diffraction method confirm
that the prepared pure ZnO and Pr doped ZnO nanostructures are in
hexagonal wurtzite structure and the microstrain is increased upon
doping. TEM analysis reveals that the prepared materials are in sheet
like nature. Absorption spectra show free excitonic absorption band
at 370 nm and red shift for the Pr doped ZnO nanostructures. The
PVA:Zn98Pr2O composite film exhibits both free excitonic and PVA
absorption bands at 282 nm. Fourier transform infrared spectral
studies confirm the presence of A1 (TO) and E1 (TO) modes of Zn-O
bond vibration and the formation of polymer composite materials.
Abstract: Fungal mutant strains have produced cellulase and
xylanase enzymes, and have induced high hydrolysis with enhanced
of rice straw. The mutants were obtained by exposing Penicillium
strain to UV-light treatments. Screening and selection after treatment
with UV-light were carried out using cellulolytic and xylanolytic
clear zones method to select the hypercellulolytic and
hyperxylanolytic mutants. These mutants were evaluated for their
cellulase and xylanase enzyme production as well as their abilities for
biodegradation of rice straw. The mutant 12 UV/1 produced 306.21%
and 209.91% cellulase and xylanase, respectively, as compared with
the original wild type strain. This mutant showed high capacity of
rice straw degradation. The effectiveness of tested mutant strain and
that of wild strain was compared in relation to enhancing the
composting process of rice straw and animal manures mixture. The
results obtained showed that the compost product of inoculated
mixture with mutant strain (12 UV/1) was the best compared to the
wild strain and un-inoculated mixture. Analysis of the composted
materials showed that the characteristics of the produced compost
were close to those of the high quality standard compost. The results
obtained in the present work suggest that the combination between
rice straw and animal manure could be used for enhancing the
composting process of rice straw and particularly when applied with
fungal decomposer accelerating the composting process.
Abstract: Africa enjoys some of the best solar radiation levels in
the world averaging between 4-6 kWh/m2/day for most of the year
and the global economic and political conditions that tend to make
African countries more dependent on their own energy resources
have caused growing interest in renewable energy based
technologies. However to-date, implementation of modern Energy
Technologies in Africa is still very low especially the use of solar
conversion technologies. This paper presents literature review and
analysis relating to the techno-economic feasibility of solar
photovoltaic power generation in Africa. The literature is basically
classified into the following four main categories. Techno-economic
feasibility of solar photovoltaic power generation, design methods,
performance evaluations of various systems and policy of potential
future of technological development of photovoltaic (PV) in Africa
by exploring the impact of alternative policy instruments and
technology cost reductions on the financial viability of investing solar
photovoltaic in Africa.
Abstract: In the paper, information on economic development
trends in developed countries are analyzed. The current status of
information society and economy of the country is reviewed and
some recommendations are given for future development.
The problems of Information Society and establishment of its
innovative economy are studied. In this turn, development trends
information economy in developed countries are analyzed.
Abstract: This paper presents powerful techniques for the
development of a new monitoring method based on multi-scale
entropy (MSE) in order to characterize the behaviour of the
concentrations of different gases present in the synthesis of Ammonia
and soft-sensor based on Principal Component Analysis (PCA).
Abstract: Paints are the most widely used methods of protection
against atmospheric corrosion of metals. The aim of this work was to
determine the protective performance of epoxy coating against sea
water before and after damage.
Investigations are conducted using stationary and non-stationary
electrochemical tools such as electrochemical impedance
spectroscopy has allowed us to characterize the protective qualities of
these films. The application of the EIS on our damaged in-situ
painting shows the existence of several capacitive loops which is an
indicator of the failure of our tested paint. Microscopic analysis
(micrograph) helped bring essential elements in understanding the
degradation of our paint condition and immersion training corrosion
products.
Abstract: Pedagogy has always been open to other disciplines
that reflect about the educational process (philosophy, sociology,
psychology, anthropology, technology, etc.). Its interdisciplinary
openness puts education, as the subject of pedagogy within a broader
context of the community, enabling the knowledge of other
disciplines to contribute to a better understanding of the fundamental
pedagogical notion of education. The purpose of pedagogy as a
science serves humans, strives towards humans, must be for humans,
and this is its ultimate goal. Humans are essentially dependent on
education, which is also considered as a category of humans’ being,
because through education an entire world develops in humans.
Anthropological assumptions of humans as "deficient beings" see the
solution in education, but they also indicate a wealth of shortcomings,
because they provide an opportunity for enrichment and formation of
culture, living and the self. In that context, this paper illustrates the
determination of pedagogy through an anthropological conception of
humans and the phenomenon of education. It presents a review of
anthropological ideas about education, by providing an analysis of
relevant literature dealing with the anthropological notion of humans,
which provides fruitful conditions for a pedagogical reconsideration
of education.
Abstract: Presently, it is necessary to ensure the sustainable
development of passenger and freight transport. Increasing
performance of road freight has had a negative impact to environment
and society. It is therefore necessary to increase the competitiveness
of intermodal transport, which is more environmentally friendly. The
study describes the effectiveness of logistical centers realization for
companies and society and research how the partial internalization of
external costs reflected in the efficient use of these centers and
increase the competitiveness of intermodal transport to road freight.
In our research, we use the method of comparative analysis and
market research to describe the advantages of logistic centers for their
users as well as for society as a whole. Method normal costing is used
for calculation infrastructure and total costs, method of conversion
costing for determine the external costs. We modelled total society
costs for road freight transport and inter modal transport chain (we
assumed that most of the traffic is carried by rail) with different
loading schemes for condition in the Slovak Republic. Our research
has shown that higher utilization of inter modal transport chain do
good not only for society, but for companies providing freight
services too. Increase in use of inter modal transport chain can bring
many benefits to society that do not bring direct immediate financial
return. They often bring the multiplier effects, such as greater use of
environmentally friendly transport mode and reduce the total society
costs.
Abstract: The characteristics of temperature distribution and
electric field in a natural rubber glove (NRG) using microwave
energy during microwave heating process are investigated
numerically and experimentally. A three-dimensional model of NRG
and microwave oven are considered in this work. The influences of
position, heating time and rotation angle of NRG on temperature
distribution and electric field are presented in details. The coupled
equations of electromagnetic wave propagation and heat transfer are
solved using the finite element method (FEM). The numerical model
is validated with an experimental study at a frequency of 2.45 GHz.
The results show that the numerical results closely match the
experimental results. Furthermore, it is found that the temperature
distribution and electric field increases with increasing heating time.
The hot spot zone appears in NRG at the tip of middle finger while
the maximum temperature occurs in case of rotation angle of NRG =
60 degree. This investigation provides the essential aspects for a
fundamental understanding of heat transport of NRG using
microwave energy in industry.
Abstract: Co metal supported on SiO2 and Al2O3 catalysts with
a metal loading varied from 30 of 70 wt.% were evaluated for
decomposition of methane to COx free hydrogen and carbon
nanomaterials. The catalytic runs were carried out from 550-800oC
under atmospheric pressure using fixed bed vertical flow reactor. The
fresh and spent catalysts were characterized by BET surface area
analyzer, XRD, SEM, TEM and TG analysis. The data showed that
50% Co/Al2O3 catalyst exhibited remarkable higher activity at 800oC
with respect to H2 production compared to rest of the catalysts.
However, the catalytic activity and durability was greatly declined at
higher temperature. The main reason for the catalytic inhibition of Co
containing SiO2 catalysts is the higher reduction temperature of
Co2SiO4. TEM images illustrate that the carbon materials with
various morphologies, carbon nanofibers (CNFs), helical-shaped
CNFs and branched CNFs depending on the catalyst composition and
reaction temperature were obtained.
Abstract: The objective of this study was to evaluate the
physical and chemical characteristics of Serra da Estrela cheese and
compare these results with those of the sensory analysis. For the
study were taken six samples of Serra da Estrela cheese produced
with 6 different ecotypes of thistle in a dairy situated in Penalva do
Castelo. The chemical properties evaluated were moisture content,
protein, fat, ash, chloride and pH; the physical properties studied
were color and texture; and finally a sensory evaluation was
undertaken. The results showed moisture varying in the range 40-
48%, protein in the range 15-20%, fat between 41-45%, ash between
3.9-5.0% and chlorides varying from 1.2 to 3.0%. The pH varied
from 4.8 to 5.4. The textural properties revealed that the crust
hardness is relatively low (maximum 7.3 N), although greater than
flesh firmness (maximum 1.7 N), and also that these cheeses are in
fact soft paste type, with measurable stickiness and intense
adhesiveness. The color analysis showed that the crust is relatively
light (L* over 50), and with a predominant yellow coloration (b*
around 20 or over) although with a slight greenish tone (a* negative).
The results of the sensory analysis did not show great variability for
most of the attributes measured, although some differences were
found in attributes such as crust thickness, crust uniformity, and
creamy flesh.
Abstract: Epidermal Growth Factor (EGF, Mw=6,045) has been
reported to have high efficiency of wound repair and anti-wrinkle
effect. However, the half-life of EGF in the body is too short to exert
the biological activity effectively when applied in free form. Growth
Factors can be stabilized by immobilization with carbohydrates from
thermal and proteolytic degradation. Low molecular weight chitosan
(LMCS) and its derivate prepared by hydrogen peroxide has high
solubility. LM6A6DC was successfully prepared as a reactive
carbohydrate for the stabilization of EGF by the reactions of LMCS
with alkalization, tosylation, azidation and reduction. The structure of
LM6A6DC was confirmed by FT-IR, 1H NMR and elementary
analysis. For enhancing the stability of free EGF, EGF was attached
with LM6A6DC by using water-soluble carbodiimide.
EGF-LM6A6DC conjugates did not show any cytotoxicity on the
Normal Human Dermal Fibroblast (NHDF) 3T3 proliferation at least
under 100 μg/ml. In the result, it was considered that LM6A6DC is
suitable to immobilize of growth factor.