Abstract: Computer based geostatistical methods can offer effective data analysis possibilities for agricultural areas by using
vectorial data and their objective informations. These methods will help to detect the spatial changes on different locations of the large
agricultural lands, which will lead to effective fertilization for optimal yield with reduced environmental pollution. In this study, topsoil (0-20 cm) and subsoil (20-40 cm) samples were taken from a
sugar beet field by 20 x 20 m grids. Plant samples were also collected
from the same plots. Some physical and chemical analyses for these
samples were made by routine methods. According to derived variation coefficients, topsoil organic matter (OM) distribution was more than subsoil OM distribution. The highest C.V. value of
17.79% was found for topsoil OM. The data were analyzed
comparatively according to kriging methods which are also used
widely in geostatistic. Several interpolation methods (Ordinary,Simple and Universal) and semivariogram models (Spherical,
Exponential and Gaussian) were tested in order to choose the suitable
methods. Average standard deviations of values estimated by simple
kriging interpolation method were less than average standard
deviations (topsoil OM ± 0.48, N ± 0.37, subsoil OM ± 0.18) of measured values. The most suitable interpolation method was simple
kriging method and exponantial semivariogram model for topsoil,
whereas the best optimal interpolation method was simple kriging
method and spherical semivariogram model for subsoil. The results
also showed that these computer based geostatistical methods should
be tested and calibrated for different experimental conditions and semivariogram models.
Abstract: This paper presents a novel method that allows an
agent host to delegate its signing power to an anonymous mobile
agent in such away that the mobile agent does not reveal any information about its host-s identity and, at the same time, can be authenticated by the service host, hence, ensuring fairness of service
provision. The solution introduces a verification server to verify the
signature generated by the mobile agent in such a way that even if colluding with the service host, both parties will not get more information than what they already have. The solution incorporates
three methods: Agent Signature Key Generation method, Agent
Signature Generation method, Agent Signature Verification method.
The most notable feature of the solution is that, in addition to allowing secure and anonymous signature delegation, it enables
tracking of malicious mobile agents when a service host is attacked. The security properties of the proposed solution are analyzed, and the solution is compared with the most related work.
Abstract: The environmental impact caused by industries is an issue that, in the last 20 years, has become very important in terms of society, economics and politics in Colombia. Particularly, the tannery process is extremely polluting because of uneffective treatments and regulations given to the dumping process and atmospheric emissions. Considering that, this investigation is intended to propose a management model based on the integration of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, that prioritizes the strategic components of the organizations. As a result, a management model will be obtained and it will provide a strategic perspective through a systemic approach to the tanning process. This will be achieved through the use of Multicriteria Decision tools, along with Quality Function Deployment and Fuzzy Logic. The strategic approach that embraces the management model using the alignment of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, is an integrated perspective that allows a gradual frame of the tactical and operative elements through the correct setting of the information flow, improving the decision making process. In that way, Small Medium Enterprises (SMEs) could improve their productivity, competitiveness and as an added value, the minimization of the environmental impact. This improvement is expected to be controlled through a Dashboard that helps the Organization measure its performance along the implementation of the model in its productive process.
Abstract: This paper aims to improve a fine lapping process of
hard disk drive (HDD) lapping machines by removing materials from
each slider together with controlling the strip height (SH) variation to
minimum value. The standard deviation is the key parameter to
evaluate the strip height variation, hence it is minimized. In this
paper, a design of experiment (DOE) with factorial analysis by twoway
analysis of variance (ANOVA) is adopted to obtain a
statistically information. The statistics results reveal that initial stripe
height patterns affect the final SH variation. Therefore, initial SH
classification using a radial basis function neural network is
implemented to achieve the proportional gain prediction.
Abstract: From the importance of the conference and its
constructive role in the studies discussion, there must be a strong
organization that allows the exploitation of the discussions in opening
new horizons. The vast amount of information scattered across the
web, make it difficult to find experts, who can play a prominent role
in organizing conferences. In this paper we proposed a new approach
of extracting researchers- information from various Web resources
and correlating them in order to confirm their correctness. As a
validator of this approach, we propose a service that will be useful to
set up a conference. Its main objective is to find appropriate experts,
as well as the social events for a conference. For this application we
us Semantic Web technologies like RDF and ontology to represent
the confirmed information, which are linked to another ontology
(skills ontology) that are used to present and compute the expertise.
Abstract: While computers are known to facilitate lower levels of learning, such as rote memorization of facts, measurable through electronically administered and graded multiple-choice questions, yes/no, and true/false answers, the imparting and measurement of higher-level cognitive skills is more vexing. These require more open-ended delivery and answers, and may be more problematic in an entirely virtual environment, notwithstanding the advances in technologies such as wikis, blogs, discussion boards, etc. As with the integration of all technology, merit is based more on the instructional design of the course than on the technology employed in, and of, itself. With this in mind, this study examined the perceptions of online students in an introductory Computer Information Systems course regarding the fostering of various higher-order thinking and team-building skills as a result of the activities, resources and technologies (ART) used in the course.
Abstract: The electrical potentials generated during eye movements and blinks are one of the main sources of artifacts in Electroencephalogram (EEG) recording and can propagate much across the scalp, masking and distorting brain signals. In recent times, signal separation algorithms are used widely for removing artifacts from the observed EEG data. In this paper, a recently introduced signal separation algorithm Mutual Information based Least dependent Component Analysis (MILCA) is employed to separate ocular artifacts from EEG. The aim of MILCA is to minimize the Mutual Information (MI) between the independent components (estimated sources) under a pure rotation. Performance of this algorithm is compared with eleven popular algorithms (Infomax, Extended Infomax, Fast ICA, SOBI, TDSEP, JADE, OGWE, MS-ICA, SHIBBS, Kernel-ICA, and RADICAL) for the actual independence and uniqueness of the estimated source components obtained for different sets of EEG data with ocular artifacts by using a reliable MI Estimator. Results show that MILCA is best in separating the ocular artifacts and EEG and is recommended for further analysis.
Abstract: Neem is a highly heterozygous and commercially
important perennial plant. Conventionally, it is propagated by seeds
which loose viability within two weeks. Strictly cross pollinating
nature of the plant causes serious barrier to the genetic improvement
by conventional methods. Alternative methods of tree improvement
such as somatic hybridization, mutagenesis and genetic
transformation require an efficient in vitro plant regeneration system.
In this regard, somatic embryogenesis particularly secondary somatic
embryogenesis may offer an effective system for large scale plant
propagation without affecting the clonal fidelity of the regenerants. It
can be used for synthetic seed production, which further bolsters
conservation of this tree species which is otherwise very difficult
The present report describes the culture conditions necessary to
induce and maintain repetitive somatic embryogenesis, for the first
time, in neem. Out of various treatments tested, the somatic embryos
were induced directly from immature zygotic embryos of neem on
MS + TDZ (0.1 μM) + ABA (4 μM), in more than 76 % cultures.
Direct secondary somatic embryogenesis occurred from primary
somatic embryos on MS + IAA (5 μM) + GA3 (5 μM) in 12.5 %
cultures. Embryogenic competence of the explant as well as of the
primary embryos was maintained for a long period by repeated
subcultures at frequent intervals. A maximum of 10 % of these
somatic embryos were converted into plantlets.
Abstract: Animated graph gives some good impressions in
presenting information. However, not many people are able to produce it because the process of generating an animated graph requires some technical skills. This work presents Content
Management System with Animated Graph (CMS-AG). It is a webbased system enabling users to produce an effective and interactive
graphical report in a short time period. It allows for three levels of user authentication, provides update profile, account management, template management, graph management, and track changes. The system development applies incremental development approach, object-oriented concepts and Web programming technologies. The design architecture promotes new technology of reporting. It also helps user cut off unnecessary expenses, save time and learn new things on different levels of users. In this paper, the developed system is described.
Abstract: A Cable-Driven Locomotion Interface provides a low
inertia haptic interface and is used as a way of enabling the user
to walk and interact with virtual surfaces. These surfaces generate
Cartesian wrenches which must be optimized for each motorized
reel in order to reproduce a haptic sensation in both feet. However,
the use of wrench control requires a measure of the cable tensions
applied to the moving platform. The latter measure may be inaccurate
if it is based on sensors located near the reel. Moreover, friction
hysteresis from the reel moving parts needs to be compensated
for with an evaluation of low angular velocity of the motor shaft.
Also, the pose of the platform is not known precisely due to cable
sagging and mechanical deformation. This paper presents a non-ideal
motorized reel design with its corresponding control strategy that
aims at overcoming the aforementioned issues. A transfert function
of the reel based on frequency responses in function of cable tension
and cable length is presented with an optimal adaptative PIDF
controller. Finally, an hybrid position/tension control is discussed with
an analysis of the stability for achieving a complete functionnality of
the haptic platform.
Abstract: Horizontal wells are proven to be better producers
because they can be extended for a long distance in the pay zone.
Engineers have the technical means to forecast the well productivity
for a given horizontal length. However, experiences have shown that
the actual production rate is often significantly less than that of
forecasted. It is a difficult task, if not impossible to identify the real
reason why a horizontal well is not producing what was forecasted.
Often the source of problem lies in the drilling of horizontal section
such as permeability reduction in the pay zone due to mud invasion
or snaky well patterns created during drilling. Although drillers aim
to drill a constant inclination hole in the pay zone, the more frequent
outcome is a sinusoidal wellbore trajectory. The two factors, which
play an important role in wellbore tortuosity, are the inclination and
side force at bit. A constant inclination horizontal well can only be
drilled if the bit face is maintained perpendicular to longitudinal axis
of bottom hole assembly (BHA) while keeping the side force nil at
the bit. This approach assumes that there exists no formation force at
bit. Hence, an appropriate BHA can be designed if bit side force and
bit tilt are determined accurately. The Artificial Neural Network
(ANN) is superior to existing analytical techniques. In this study, the
neural networks have been employed as a general approximation tool
for estimation of the bit side forces. A number of samples are
analyzed with ANN for parameters of bit side force and the results
are compared with exact analysis. Back Propagation Neural network
(BPN) is used to approximation of bit side forces. Resultant low
relative error value of the test indicates the usability of the BPN in
this area.
Abstract: The purpose of this paper is to provide a practical
example to the Linear Quadratic Gaussian (LQG) controller. This
method includes a description and some discussion of the discrete
Kalman state estimator. One aspect of this optimality is that the
estimator incorporates all information that can be provided to it. It
processes all available measurements, regardless of their precision, to
estimate the current value of the variables of interest, with use of
knowledge of the system and measurement device dynamics, the
statistical description of the system noises, measurement errors, and
uncertainty in the dynamics models.
Since the time of its introduction, the Kalman filter has been the
subject of extensive research and application, particularly in the area
of autonomous or assisted navigation. For example, to determine the
velocity of an aircraft or sideslip angle, one could use a Doppler
radar, the velocity indications of an inertial navigation system, or the
relative wind information in the air data system. Rather than ignore
any of these outputs, a Kalman filter could be built to combine all of
this data and knowledge of the various systems- dynamics to
generate an overall best estimate of velocity and sideslip angle.
Abstract: Experiments were carried out on the survival and growth of Rasbora daniconius, Puntius ticto and Puntius conchonius. The motivation of the study was to obtain information for growing the fish on a commercial scale for their use as biological control agents against mosquito larvae. The effects of temperature, total hardness, DO, pH and feed on the growth of fish were also investigated. Excessive value of total hardness was found because very rich calcium ion is present in Chitrakoot area. There was significant increases in growth rates of fish as temperature was increased from 280C to 300C. Further increases in temperature up to 320C, did not further affect growth. The positive and highly significant correlations 0.991488, 0.9581 and 0.9935 were found between length and weight of P. ticto, P. conchonius and R. daniconius respectively. The regression was significant at 5% level of probability.
Abstract: This study, focusing on the importance of encouraging
outdoor activities for children, aims to propose and implement a
Web-GIS based outdoor education program for elementary schools,
which will then be evaluated by users. Specifically, for the purpose of
improved outdoor activities in the elementary school education, the
outdoor education program, with chiefly using the Web-GIS that
provides a good information provision and sharing tool, is proposed
and implemented before being evaluated by users. Conclusions of the
study boil down to:
(1) An eight-staged outdoor education program based on the Web-GIS
was proposed for a “second school" of an elementary school that
was then implemented before being evaluated by users (teachers,
instructors, students, and their parents).
(2) The program generally received a good evaluation, while a lot of
students and their parents evaluated negatively for the degree of
discovery and for the degree of interest, respectively, in the
questionnaire survey of students and their parents conducted after
the “second school". The surveys clearly show that an issue to be
solved, from the viewpoint of teachers in particular, is the
establishment of the GIS that will easily represent teaching materials
developed by teachers and of Web-GIS, and improved significance
of the use of GIS and Web-GIS for their widespread.
Abstract: Feature-based registration is an effective technique for clinical use, because it can greatly reduce computational costs. However, this technique, which estimates the transformation by using feature points extracted from two images, may cause misalignments. To handle with this limitation, we propose to extract the salient edges and extracted control points (CP) of medical images by using efficiency of multiresolution representation of data nonsubsampled contourlet transform (NSCT) that finds the best feature points. The MR images were first decomposed using the NSCT, and then Edge and CP were extracted from bandpass directional subband of NSCT coefficients and some proposed rules. After edge and CP extraction, mutual information was adopted for the registration of feature points and translation parameters are calculated by using particle swarm optimization (PSO). The experimental results showed that the proposed method produces totally accurate performance for registration medical CT-MR images.
Abstract: Image registration plays an important role in the
diagnosis of dental pathologies such as dental caries, alveolar bone
loss and periapical lesions etc. This paper presents a new wavelet
based algorithm for registering noisy and poor contrast dental x-rays.
Proposed algorithm has two stages. First stage is a preprocessing
stage, removes the noise from the x-ray images. Gaussian filter has
been used. Second stage is a geometric transformation stage.
Proposed work uses two levels of affine transformation. Wavelet
coefficients are correlated instead of gray values. Algorithm has been
applied on number of pre and post RCT (Root canal treatment)
periapical radiographs. Root Mean Square Error (RMSE) and
Correlation coefficients (CC) are used for quantitative evaluation.
Proposed technique outperforms conventional Multiresolution
strategy based image registration technique and manual registration
technique.
Abstract: With the tremendous growth of World Wide Web
(WWW) data, there is an emerging need for effective information
retrieval at the document level. Several query languages such as
XML-QL, XPath, XQL, Quilt and XQuery are proposed in recent
years to provide faster way of querying XML data, but they still lack of
generality and efficiency. Our approach towards evolving a framework
for querying semistructured documents is based on formal query
algebra. Two elements are introduced in the proposed framework:
first, a generic and flexible data model for logical representation of
semistructured data and second, a set of operators for the manipulation
of objects defined in the data model. In additional to accommodating
several peculiarities of semistructured data, our model offers novel
features such as bidirectional paths for navigational querying and
partitions for data transformation that are not available in other
proposals.
Abstract: A lot of matching algorithms with different characteristics have been introduced in recent years. For real time systems these algorithms are usually based on minutiae features. In this paper we introduce a novel approach for feature extraction in which the extracted features are independent of shift and rotation of the fingerprint and at the meantime the matching operation is performed much more easily and with higher speed and accuracy. In this new approach first for any fingerprint a reference point and a reference orientation is determined and then based on this information features are converted into polar coordinates. Due to high speed and accuracy of this approach and small volume of extracted features and easily execution of matching operation this approach is the most appropriate for real time applications.
Abstract: Transportation authorities need to provide the services
and facilities that are critical to every country-s well-being and
development. Management of the road network is becoming
increasingly challenging as demands increase and resources are
limited. Public sector institutions are integrating performance
information into budgeting, managing and reporting via
implementing performance measurement systems. In the face of
growing challenges, performance measurement of road networks is
attracting growing interest in many countries. The large scale of
public investments makes the maintenance and development of road
networks an area where such systems are an important assessment
tool. Transportation agencies have been using performance
measurement and modeling as part of pavement and bridge
management systems. Recently the focus has been on extending the
process to applications in road construction and maintenance
systems, operations and safety programs, and administrative
structures and procedures. To eliminate failure and dysfunctional
consequences the importance of obtaining objective data and
implementing evaluation instrument where necessary is presented in
this paper
Abstract: There are various solutions for improving existing overhead line systems with the general purpose of increasing their limited capacity. The capacity reserve of the existing overhead lines is an important problem that must be considered from different aspects. The paper contains a comparative analysis of the mechanical and thermal limitations of an existing overhead line based on certain calculation conditions characterizing the examined variants. The methodology of the proposed estimation of the permissible conductor temperature and maximum load current is described in detail. The transmission line model consists of specific information of an existing overhead line of the Latvian power network. The main purpose of the simulation tasks is to find an additional capacity reserve by using accurate mathematical models. The results of the obtained data are presented.