Abstract: Diagnostic and detection of the arterial stiffness is
very important; which gives indication of the associated increased risk of cardiovascular diseases. To make a cheap and easy method for general screening technique to avoid the future cardiovascular
complexes , due to the rising of the arterial stiffness ; a proposed algorithm depending on photoplethysmogram to be used. The
photoplethysmograph signals would be processed in MATLAB. The
signal will be filtered, baseline wandering removed, peaks and
valleys detected and normalization of the signals should be achieved
.The area under the catacrotic phase of the photoplethysmogram
pulse curve is calculated using trapezoidal algorithm ; then will used
in cooperation with other parameters such as age, height, blood
pressure in neural network for arterial stiffness detection. The Neural
network were implemented with sensitivity of 80%, accuracy 85%
and specificity of 90% were got from the patients data. It is
concluded that neural network can detect the arterial STIFFNESS
depending on risk factor parameters.
Abstract: Identifying parameters in an epidemic model is one
of the important aspect of modeling. In this paper, we suggest a
method to identify the transmission rate by using the multistage
Adomian decomposition method. As a case study, we use the data of
the reported dengue fever cases in the city of Shah Alam, Malaysia.
The result obtained fairly represents the actual situation. However, in
the SIR model, this method serves as an alternative in parameter
identification and enables us to make necessary analysis for a smaller
interval.
Abstract: In this paper, the estimation of the stress-strength
parameter R = P(Y < X), when X and Y are independent and both
are Lomax distributions with the common scale parameters but
different shape parameters is studied. The maximum likelihood
estimator of R is derived. Assuming that the common scale parameter
is known, the bayes estimator and exact confidence interval of R are
discussed. Simulation study to investigate performance of the
different proposed methods has been carried out.
Abstract: To make use of the limited amounts of water in arid
region, the Iranians developed man-made underground water
channels called qanats (kanats) .In fact, qanats may be considered as
the first long-distance water transfer system. Qanats are an ancient
water transfer system found in arid regions wherein groundwater
from mountainous areas, aquifers and sometimes from rivers, was
brought to points of re-emergence such as an oasis, through one or
more underground tunnels. The tunnels, many of which were
kilometers in length, had designed for slopes to provide gravitational
flow. The tunnels allowed water to drain out to the surface by gravity
to supply water to lower and flatter agricultural land.
Qanats have been an ancient, sustainable system facilitating the
harvesting of water for centuries in Iran, and more than 35 additional
countries of the world such as India, Arabia, Egypt, North Africa,
Spain and even to New world.
There are about 22000 qanats in Iran with 274000 kilometers of
underground conduits all built by manual labor. The amount of
water of the usable qanats of Iran produce is altogether 750 to
1000 cubic meter per second. The longest chain of qanat is
situated in Gonabad region in Khorasan province. It is 70
kilometers long. Qanats are renewable water supply systems that
have sustained agricultural settlement on the Iranian plateau for
millennia. The great advantages of Qanats are no evaporation
during transit, little seepage , no raising of the water- table and no
pollution in the area surrounding the conduits. Qanat systems
have a profound influence on the lives of the water users in Iran, and
conform to Iran-s climate. Qanat allows those living in a desert
environment adjacent to a mountain watershed to create a large oasis
in an otherwise stark environment.
This paper explains qanats structure designs, their history,
objectives causing their creation, construction materials, locations
and their importance in different times, as well as their present
sustainable role in Iran.
Abstract: Order reduction of linear-time invariant systems employing two methods; one using the advantages of Routh approximation and other by an evolutionary technique is presented in this paper. In Routh approximation method the denominator of the reduced order model is obtained using Routh approximation while the numerator of the reduced order model is determined using the indirect approach of retaining the time moments and/or Markov parameters of original system. By this method the reduced order model guarantees stability if the original high order model is stable. In the second method Particle Swarm Optimization (PSO) is employed to reduce the higher order model. PSO method is based on the minimization of the Integral Squared Error (ISE) between the transient responses of original higher order model and the reduced order model pertaining to a unit step input. Both the methods are illustrated through numerical examples.
Abstract: Displacement measurement was conducted on compact normal and shear specimens made of acrylic homogeneous material subjected to mixed-mode loading by digital image correlation. The intelligent hybrid method proposed by Nishioka et al. was applied to the stress-strain analysis near the crack tip. The accuracy of stress-intensity factor at the free surface was discussed from the viewpoint of both the experiment and 3-D finite element analysis. The surface images before and after deformation were taken by a CMOS camera, and we developed the system which enabled the real time stress analysis based on digital image correlation and inverse problem analysis. The great portion of processing time of this system was spent on displacement analysis. Then, we tried improvement in speed of this portion. In the case of cracked body, it is also possible to evaluate fracture mechanics parameters such as the J integral, the strain energy release rate, and the stress-intensity factor of mixed-mode. The 9-points elliptic paraboloid approximation could not analyze the displacement of submicron order with high accuracy. The analysis accuracy of displacement was improved considerably by introducing the Newton-Raphson method in consideration of deformation of a subset. The stress-intensity factor was evaluated with high accuracy of less than 1% of the error.
Abstract: In recent years, global warming has become a
worldwide problem. The reduction of carbon dioxide emissions is a
top priority for many companies in the manufacturing industry. In the
automobile industry as well, the reduction of carbon dioxide emissions
is one of the most important issues. Technology to reduce the weight
of automotive parts improves the fuel economy of automobiles, and is
an important technology for reducing carbon dioxide. Also, even if
this weight reduction technology is applied to electric automobiles
rather than gasoline automobiles, reducing energy consumption
remains an important issue. Plastic processing of hollow pipes is one
important technology for realizing the weight reduction of automotive
parts. Ohashi et al. [1],[2] present an example of research on pipe
formation in which a process was carried out to enlarge a pipe
diameter using a lost core, achieving the suppression of wall thickness
reduction and greater pipe expansion than hydroforming.
In this study, we investigated a method to increase the wall
thickness of a pipe through pipe compression using planetary rolls.
The establishment of a technology whereby the wall thickness of a
pipe can be controlled without buckling the pipe is an important
technology for the weight reduction of products. Using the finite
element analysis method, we predicted that it would be possible to
increase the compression of an aluminum pipe with a 3mm wall
thickness by approximately 20%, and wall thickness by approximately
20% by pressing the hollow pipe with planetary rolls.
Abstract: A direct connection between ElectroEncephaloGram
(EEG) and the genetic information of individuals has been
investigated by neurophysiologists and psychiatrists since 1960-s;
and it opens a new research area in the science. This paper focuses on
the person identification based on feature extracted from the EEG
which can show a direct connection between EEG and the genetic
information of subjects. In this work the full EO EEG signal of
healthy individuals are estimated by an autoregressive (AR) model
and the AR parameters are extracted as features. Here for feature
vector constitution, two methods have been proposed; in the first
method the extracted parameters of each channel are used as a
feature vector in the classification step which employs a competitive
neural network and in the second method a combination of different
channel parameters are used as a feature vector. Correct classification
scores at the range of 80% to 100% reveal the potential of our
approach for person classification/identification and are in agreement
to the previous researches showing evidence that the EEG signal
carries genetic information. The novelty of this work is in the
combination of AR parameters and the network type (competitive
network) that we have used. A comparison between the first and the
second approach imply preference of the second one.
Abstract: Estimation of stature is an important step in developing a biological profile for human identification. It may provide a valuable indicator for unknown individual in a population. The aim of this study was to analyses the relationship between stature and lower limb dimensions in the Malaysian population. The sample comprised 100 corpses, which included 69 males and 31 females between age ranges of 20 to 90 years old. The parameters measured were stature, thigh length, lower leg length, leg length, foot length, foot height and foot breadth. Results showed that mean values in males were significantly higher than those in females (P < 0.05). There were significant correlations between lower limb dimensions and stature. Cross-validation of the equation on 100 individuals showed close approximation between known stature and estimated stature. It was concluded that lower limb dimensions were useful for estimation of stature, which should be validated in future studies.
Abstract: Thyroid dysfunction is one of the most frequently
reported complications of chronic blood transfusion therapy in patients with beta-thalassemia major (BTM). However, the occurrence of thyroid dysfunction and its possible association with
iron overload in BTM patients is still under debate. Therefore, this
study aimed to investigate the status of thyroid functions and iron overload in adolescent and young adult patients with BTM in Jordan population. Thirty six BTM patients aged 12-28 years and matched controls were included in this study. All patients have been receiving frequent blood transfusion to maintain pretransfusion hemoglobin
concentration above 10 g dl-1 and deferoxamine at a dose of 45 mg kg-1 day-1 (8 h, 5-7 days/week) by subcutaneous infusion. Blood
samples were drawn from patients and controls. The status of thyroid functions and iron overload was evaluated by measurements of serum
free thyroxine (FT4), triiodothyronine (FT3), thyrotropin (TSH) and
serum ferritin level. A number of some hematological and
biochemical parameters were also measured. It was found that hematocrit, serum ferritin, hemoglobin, FT3 and zinc, copper mean values were significantly higher in the patients than in the controls (P< 0.05). On other hand, leukocyte, FT4 and TSH mean values were
similar to that of the controls. In addition, our data also indicated that
all of the above examined parameters were not significantly affected
by the patient-s age and gender. Deferoxamine approach for removing excess iron from our BTM patient did not normalize the
values of serum ferritin, copper and zinc, suggesting poor compliance
with deferoxamine chelation therapy. Thus, we recommend the use
of a combination of deferoxamine and deferiprone to reduce the risk
of excess of iron in our patients. Furthermore, thyroid dysfunction
appears to be a rare complication, because our patients showed
normal mean levels for serum TSH and FT4. However, high mean
levels of serum ferritin, zinc, copper might be seen as potential risk
factors for initiation and development of thyroid dysfunctions and
other diseases. Therefore, further studies must be carried out at
yearly intervals with large sample number, to detect subclinical
thyroid dysfunction cases.
Abstract: The distribution of macrobenthic polychaetes along
the coastal waters of Penang National Park was surveyed to estimate
the effect of various environmental parameters at three stations
(200m, 600m and 1200m) from the shoreline, during six sampling
months, from June 2010 to April 2011.The use of polychaetes in
descriptive ecology is surveyed in the light of a recent investigation
particularly concerning the soft bottom biota environments.
Polychaetes, often connected in the former to the notion of
opportunistic species able to proliferate after an enhancement in
organic matter, had performed a momentous role particularly with
regard to effected soft-bottom habitats. The objective of this survey
was to investigate different environment stress over soft bottom
polychaete community along Teluk Ketapang and Pantai Acheh
(Penang National Park) over a year period. Variations in the
polychaete community were evaluated using univariate and
multivariate methods. The results of PCA analysis displayed a
positive relation between macrobenthic community structures and
environmental parameters such as sediment particle size and organic
matter in the coastal water. A total of 604 individuals were examined
which was grouped into 23 families. Family Nereidae was the most
abundant (22.68%), followed by Spionidae (22.02%), Hesionidae
(12.58%), Nephtylidae (9.27%) and Orbiniidae (8.61%). It is
noticeable that good results can only be obtained on the basis of good
taxonomic resolution. We proposed that, in monitoring surveys,
operative time could be optimized not only by working at a highertaxonomic
level on the entire macrobenthic data set, but by also
choosing an especially indicative group and working at lower
taxonomic and good level.
Abstract: Laser interferometric methods have been utilized for the measurement of natural convection heat transfer from a heated vertical flat plate, in the investigation presented here. The study mainly aims at comparing two different fringe orientations in the wedge fringe setting of Mach-Zehnder interferometer (MZI), used for the measurements. The interference fringes are set in horizontal and vertical orientations with respect to the heated surface, and two different fringe analysis methods, namely the stepping method and the method proposed by Naylor and Duarte, are used to obtain the heat transfer coefficients. The experimental system is benchmarked with theoretical results, thus validating its reliability in heat transfer measurements. The interference fringe patterns are analyzed digitally using MATLAB 7 and MOTIC Plus softwares, which ensure improved efficiency in fringe analysis, hence reducing the errors associated with conventional fringe tracing. The work also discuss the relative merits and limitations of the two methods used.
Abstract: Sudoku is a kind of logic puzzles. Each puzzle consists
of a board, which is a 9×9 cells, divided into nine 3×3 subblocks
and a set of numbers from 1 to 9. The aim of this puzzle is to
fill in every cell of the board with a number from 1 to 9 such
that in every row, every column, and every subblock contains each
number exactly one. Sudoku puzzles belong to combinatorial problem
(NP complete). Sudoku puzzles can be solved by using a variety of
techniques/algorithms such as genetic algorithms, heuristics, integer
programming, and so on. In this paper, we propose a new approach for
solving Sudoku which is by modelling them as block-world problems.
In block-world problems, there are a number of boxes on the table
with a particular order or arrangement. The objective of this problem
is to change this arrangement into the targeted arrangement with the
help of two types of robots. In this paper, we present three models
for Sudoku. We modellized Sudoku as parameterized multi-agent
systems. A parameterized multi-agent system is a multi-agent system
which consists of several uniform/similar agents and the number of
the agents in the system is stated as the parameter of this system. We
use Temporal Logic of Actions (TLA) for formalizing our models.
Abstract: This paper treats a discrete-time batch arrival queue with single working vacation. The main purpose of this paper is to present a performance analysis of this system by using the supplementary variable technique. For this purpose, we first analyze the Markov chain underlying the queueing system and obtain its ergodicity condition. Next, we present the stationary distributions of the system length as well as some performance measures at random epochs by using the supplementary variable method. Thirdly, still based on the supplementary variable method we give the probability generating function (PGF) of the number of customers at the beginning of a busy period and give a stochastic decomposition formulae for the PGF of the stationary system length at the departure epochs. Additionally, we investigate the relation between our discretetime system and its continuous counterpart. Finally, some numerical examples show the influence of the parameters on some crucial performance characteristics of the system.
Abstract: Extreme temperature of several stations in Malaysia is
modelled by fitting the monthly maximum to the Generalized
Extreme Value (GEV) distribution. The Mann-Kendall (MK) test
suggests a non-stationary model. Two models are considered for
stations with trend and the Likelihood Ratio test is used to determine
the best-fitting model. Results show that half of the stations favour a
model which is linear for the location parameters. The return level is
the level of events (maximum temperature) which is expected to be
exceeded once, on average, in a given number of years, is obtained.
Abstract: A biosensor based on glucose oxidase (GOx) immobilized onto nanoparticles zirconium oxide with polyethylene nanocomposite for glucose monitoring has been designed. The CTAB/PEG/ZrO2/GOx nanocomposite was deposited onto screen printed carbon paste (SPCE) electrode via spin coating technique. The properties of CTAB/PEG/ZrO2/GOx were study using scanning electron microscopy (SEM). The SPE modified with the CTAB/PEG/ZrO2/GOx showed electrocatalytical response to the oxidation of glucose when ferrocene carboxaldehyde was used as an artificial redox mediator, which was studied by cyclic voltammetry (CV). Several parameters such as working potential, effect of pH and effect of ZrO2/PEG layers that governed the analytical performance of the biosensor, have been studied. The biosensor was applied to detect glucose with a linear range of 0.4 to 2.0 mmol L−1 with good repetability and reproducibility.
Abstract: For many industrial applications plate heat
exchangers are demonstrating a large superiority over the
other types of heat exchangers. The efficiency of such a
device depends on numerous factors the effect of which needs
to be analysed and accurately evaluated.
In this paper we present a theoretical analysis of a cocurrent
plate heat exchanger and the results of its numerical
simulation.
Knowing the hot and the cold fluid streams inlet temperatures,
the respective heat capacities mCp
and the value of the
overall heat transfer coefficient, a 1-D mathematical model
based on the steady flow energy balance for a differential
length of the device is developed resulting in a set of N first
order differential equations with boundary conditions where N
is the number of channels.For specific heat exchanger
geometry and operational parameters, the problem is
numerically solved using the shooting method.
The simulation allows the prediction of the temperature
map in the heat exchanger and hence, the evaluation of its
performances. A parametric analysis is performed to evaluate
the influence of the R-parameter on the e-NTU values. For
practical purposes effectiveness-NTU graphs are elaborated
for specific heat exchanger geometry and different operating
conditions.
Abstract: Activated carbon was prepared from agricultural waste “almond (Prunus amygdalus) nut shells" by chemical activation with phosphoric acid as an activating agent at 450 °C for 24 hr soaking time. The physical and chemical properties were analyzed. The adsorption of chromium VI from aqueous solution on almond nut shell activated carbon (ASAC) was investigated. The adsorption process parameters pH, agitation speed, agitation time, adsorbent dose were optimized. 98% of Cr VI was sorbed at pH 2 and stirring speed 200 rpm.. Surface structure showed that ASAC has a spongy type structure showing large number of pores
Abstract: Middle-gate is located in Hasankeyf, Batman dating
back to 1800 BC and is one of the important historical structures in
Turkey. The ancient structure has suffered major structural cracks
due to aging as well as lateral pressure of a cracked rock which is
predicted to be about 100 tons. The existing support system was
found to be inadequate to support the load especially after a recent
rock fall in the close vicinity. Concerns were increased since the
existing support system that is integral with a damaged and cracked
gate wall needed to be replaced by a new support system. The
replacement process must be carefully monitored by crackmeters and
control mechanisms should be integrated to prevent cracks to expand
while the same crack width needs to be maintained after the
operation. The control system and actions taken during the
intervention are explained in this paper.
Abstract: Vinegar or sour wine is a product of alcoholic and
subsequent acetous fermentation of sugary precursors derived from
several fruits or starchy substrates. This delicious food additive and
supplement contains not less than 4 grams of acetic acid in 100 cubic
centimeters at 20°C. Among the large number of bacteria that are
able to produce acetic acid, only few genera are used in vinegar
industry most significant of which are Acetobacter and
Gluconobacter. In this research we isolated and identified an
Acetobacter strain from Iranian apricot, a very delicious and sensitive
summer fruit to decay, we gathered from fruit's stores in Isfahan,
Iran. The main culture media we used were Carr, GYC, Frateur and
an industrial medium for vinegar production. We isolated this strain
using a novel miniature fermentor we made at Pars Yeema
Biotechnologists Co., Isfahan Science and Technology Town (ISTT),
Isfahan, Iran. The microscopic examinations of isolated strain from
Iranian apricot showed gram negative rods to cocobacilli. Their
catalase reaction was positive and oxidase reaction was negative and
could ferment ethanol to acetic acid. Also it showed an acceptable
growth in 5%, 7% and 9% ethanol concentrations at 30°C using
modified Carr media after 24, 48 and 96 hours incubation
respectively. According to its tolerance against high concentrations of
ethanol after four days incubation and its high acetic acid production,
8.53%, after 144 hours, this strain could be considered as a suitable
industrial strain for a production of a new type of vinegar, apricot
vinegar, with a new and delicious taste. In conclusion this is the first
report of isolation and identification of an Acetobacter strain from
Iranian apricot with a very good tolerance against high ethanol
concentrations as well as high acetic acid productivity in an
acceptable incubation period of time industrially. This strain could be
used in vinegar industry to convert apricot spoilage to a beneficiary
product and mentioned characteristics have made it as an amenable
strain in food and agricultural biotechnology.