Abstract: Numerical studies have been carried out using a two
dimensional code to examine the influence of pressure / thrust
transient of solid propellant rockets at liftoff. This code solves
unsteady Reynolds-averaged thin-layer Navier–Stokes equations by
an implicit LU-factorization time-integration method. The results
from the parametric study indicate that when the port is narrow there
is a possibility of increase in pressure / thrust-rise rate due to
relatively high flame spread rate. Parametric studies further reveal
that flame spread rate can be altered by altering the propellant
properties, igniter jet characteristics and nozzle closure burst pressure
without altering the grain configuration and/or the mission
demanding thrust transient. We observed that when the igniter
turbulent intensity is relatively low the vehicle could liftoff early due
to the early flow choking of the rocket nozzle. We concluded that the
high pressurization-rate has structural implications at liftoff in
addition to transient burning effect. Therefore prudent selection of the
port geometry and the igniter, for meeting the mission requirements,
within the given envelop are meaningful objectives for any designer
for the smooth liftoff of solid propellant rockets.
Abstract: Contrary to negative emotion regulation, coping with
positive moods have received less attention in adolescent adjustment.
However, some research has found that everyone is different on
dealing with their positive emotions, which affects their adaptation
and well-being. The purpose of the present study was to investigate
the relationship between positive emotions dampening and
internalizing behavior problems of adolescent in Taiwan. A survey
was conducted and 208 students (12 to14 years old) completed the
strengths and difficulties questionnaire (SDQ), the Affect Intensity
Measure, and the positive emotions dampening scale. Analysis
methods such as descriptive statistics, t-test, Pearson correlations and
multiple regression were adapted. The results were as follows:
Emotionality and internalizing problem behavior have significant
gender differences. Compared to boys, girls have a higher score on
negative emotionality and are at a higher risk for internalizing
symptoms. However, there are no gender differences on positive
emotion dampening. Additionally, in the circumstance that negative
emotionality acted as the control variable, positive emotion
dampening strategy was (positive) related to internalizing behavior
problems. Given the results of this study, it is suggested that coaching
deconstructive positive emotion strategies is to assist adolescents
with internalizing behavior problems is encouraged.
Abstract: The dynamic speckle or biospeckle is an interference
phenomenon generated at the reflection of a coherent light by an
active surface or even by a particulate or living body surface. The
above mentioned phenomenon gave scientific support to a method
named biospeckle which has been employed to study seed viability,
biological activity, tissue senescence, tissue water content, fruit
bruising, etc. Since the above mentioned method is not invasive and
yields numerical values, it can be considered for possible automation
associated to several processes, including selection and sorting.
Based on these preliminary considerations, this research work
proposed to study the interaction of a laser beam with vegetative
samples by measuring the incident light intensity and the transmitted
light beam intensity at several vegetative slabs of varying thickness.
Tests were carried on fifteen slices of apple tissue divided into three
thickness groups, i.e., 4 mm, 5 mm, 18 mm and 22 mm. A diode laser
beam of 10mW and 632 nm wavelength and a Samsung digital
camera were employed to carry the tests. Outgoing images were
analyzed by comparing the gray gradient of a fixed image column of
each image to obtain a laser penetration scale into the tissue,
according to the slice thickness.
Abstract: Displacement measurement was conducted on compact normal and shear specimens made of acrylic homogeneous material subjected to mixed-mode loading by digital image correlation. The intelligent hybrid method proposed by Nishioka et al. was applied to the stress-strain analysis near the crack tip. The accuracy of stress-intensity factor at the free surface was discussed from the viewpoint of both the experiment and 3-D finite element analysis. The surface images before and after deformation were taken by a CMOS camera, and we developed the system which enabled the real time stress analysis based on digital image correlation and inverse problem analysis. The great portion of processing time of this system was spent on displacement analysis. Then, we tried improvement in speed of this portion. In the case of cracked body, it is also possible to evaluate fracture mechanics parameters such as the J integral, the strain energy release rate, and the stress-intensity factor of mixed-mode. The 9-points elliptic paraboloid approximation could not analyze the displacement of submicron order with high accuracy. The analysis accuracy of displacement was improved considerably by introducing the Newton-Raphson method in consideration of deformation of a subset. The stress-intensity factor was evaluated with high accuracy of less than 1% of the error.
Abstract: This paper proposes an algorithm which automatically aligns and stitches the component medical images (fluoroscopic) with varying degrees of overlap into a single composite image. The alignment method is based on similarity measure between the component images. As applied here the technique is intensity based rather than feature based. It works well in domains where feature based methods have difficulty, yet more robust than traditional correlation. Component images are stitched together using the new triangular averaging based blending algorithm. The quality of the resultant image is tested for photometric inconsistencies and geometric misalignments. This method cannot correct rotational, scale and perspective artifacts.
Abstract: There have been numerous implementations of
security system using biometric, especially for identification and
verification cases. An example of pattern used in biometric is the iris
pattern in human eye. The iris pattern is considered unique for each
person. The use of iris pattern poses problems in encoding the human
iris.
In this research, an efficient iris recognition method is proposed.
In the proposed method the iris segmentation is based on the
observation that the pupil has lower intensity than the iris, and the
iris has lower intensity than the sclera. By detecting the boundary
between the pupil and the iris and the boundary between the iris and
the sclera, the iris area can be separated from pupil and sclera. A step
is taken to reduce the effect of eyelashes and specular reflection of
pupil. Then the four levels Coiflet wavelet transform is applied to the
extracted iris image. The modified Hamming distance is employed to
measure the similarity between two irises.
This research yields the identification success rate of 84.25% for
the CASIA version 1.0 database. The method gives an accuracy of
77.78% for the left eyes of MMU 1 database and 86.67% for the
right eyes. The time required for the encoding process, from the
segmentation until the iris code is generated, is 0.7096 seconds.
These results show that the accuracy and speed of the method is
better than many other methods.
Abstract: Drought is one of the most damaging climate-related
hazards, it is generally considered as a prolonged absence of
precipitation. This normal and recurring climate phenomenon had
plagued civilization throughout history because of the negative
impacts on economical, environmental and social sectors. Drought
characteristics are thus recognized as important factors in water
resources planning and management. The purpose of this study is to
detect the changes in drought frequency, persistence and severity
in the Ruhr river basin. The frequency of drought events was
calculated using the Standardized Precipitation Index (SPI). Used
data are daily precipitation records from seven meteorological
stations covering the period 1961-2007. The main benefit of the
application of this index is its versatility, only rainfall data is required
to deliver five major dimensions of a drought : duration, intensity,
severity, magnitude, and frequency. Furthermore, drought can be
calculated in different time steps. In this study SPI was calculated for
1, 3, 6, 9, 12, and 24 months. Several drought events were detected
in the covered period, these events contain mild, moderate and severe
droughts. Also positive and negative trends in the SPI values were
observed.
Abstract: Iran has diverse climates and each have established distinct properties in their area. The extent and intensity of climatic factors effects on the lives of people living in various regions of Iran is so great that it cannot be simply ignored. In a large part of Iran known as the Central Plateau there is no precipitation for more than half of the year and dry weather and scarcity of fresh water pose an ever present problem for the people of these regions while in north of Iran upon the southern shores of the Caspian Sea the people face 80% humidity caused by the sea and 2 meters of annual precipitation. This article tries to review the past experiences of local architecture of Iran-s various regions so that they can be used to reshape and redirect the urban areas and structure of Iran-s current cities to provide environmental comfort by minimum use of fossil fuels.
Abstract: The renewable energy has been attracting attention as
a new alternative energy due to the problem of environmental
pollution and resource depletion. In particular, daylighting and PV
system are regarded as the solutions. In this paper, the hybrid
dimming control system supplied by solar cell and daylighting
system was designed. Daylighting system is main source and PV
system is spare source. PV system operates the LED lamp which
supports daylighting system because daylighting system is unstable
due to the variation of irradiance. In addition, PV system has a role
charging batteries. Battery charging has a benefit that PV system
operate LED lamp in the bad weather. However, LED lamp always
can`t turn on that-s why dimming control system was designed. In
particular, the solar charging robot was designed to check the
interior irradiance intensity. These systems and the application of
the solar charging robot are expected to contribute developing
alternative energy in the near future.
Abstract: A lightpipe is an about 99 percent specular reflective
mirror pipe or duct that is used for the transmission of the daylight
from the outside into a building. The lightpipes are usually used in
the daylighting buildings, in the residential, industrial and
commercial sectors. This paper is about the performances of a
lightpipe installed in a laboratory (3 m x 2.6 m x 3 m) without
windows. The aim is to analyse the luminous intensity distribution
for several sky/sun conditions. The lightpipe was monitored during
the year 2006. The lightpipe is 1 m long and the diameter of the top
collector and of the internal diffuser device is 0.25 m. In the
laboratory there are seven illuminance sensors: one external is
located on the roof of the laboratory and six internal sensors are
connected to a data acquisition system. The internal sensors are
positioned under the internal diffusive device at an height of 0.85 m
from the floor to simulate a working plane. The numerical data are
obtained through a simulation software. This paper shows the
comparison between the experimental and numerical results
concerning the behavior of the lightpipe.
Abstract: This paper reports on the enhanced photoluminescence
(PL) of nanocomposites through the layered structuring of phosphor
and quantum dot (QD). Green phosphor of Sr2SiO4:Eu, red QDs of
CdSe/CdS/CdZnS/ZnS core-multishell, and thermo-curable resin
were used for this study. Two kinds of composite (layered and mixed)
were prepared, and the schemes for optical energy transfer between
QD and phosphor were suggested and investigated based on PL decay
characteristics. It was found that the layered structure is more effective
than the mixed one in the respects of PL intensity, PL decay and
thermal loss. When this layered nanocomposite (QDs on phosphor) is
used to make white light emitting diode (LED), the brightness is
increased by 37 %, and the color rendering index (CRI) value is raised
to 88.4 compared to the mixed case of 80.4.
Abstract: Color image segmentation plays an important role in
computer vision and image processing areas. In this paper, the
features of Volterra filter are utilized for color image segmentation.
The discrete Volterra filter exhibits both linear and nonlinear
characteristics. The linear part smoothes the image features in
uniform gray zones and is used for getting a gross representation of
objects of interest. The nonlinear term compensates for the blurring
due to the linear term and preserves the edges which are mainly used
to distinguish the various objects. The truncated quadratic Volterra
filters are mainly used for edge preserving along with Gaussian noise
cancellation. In our approach, the segmentation is based on K-means
clustering algorithm in HSI space. Both the hue and the intensity
components are fully utilized. For hue clustering, the special cyclic
property of the hue component is taken into consideration. The
experimental results show that the proposed technique segments the
color image while preserving significant features and removing noise
effects.
Abstract: Mutations of the telomeric copy of the survival motor neuron 1 (SMN1) gene cause spinal muscular atrophy. A deletion of the Eef1a2 gene leads to lower motor neuron degeneration in wasted mice. Indirect evidences have been shown that the eEF1A protein family may interact with SMN, and our previous study showed that abnormalities of neuromuscular junctions in wasted mice were similar to those of Smn mutant mice. To determine potential colocalization between SMN and tissue-specific translation elongation factor 1A2 (eEF1A2), an immunochemical analysis of HeLa cells transfected with the plasmid pcDNA3.1(+)C-hEEF1A2- myc and a new quantitative test of colocalization by intensity correlation analysis (ICA) was used to explore the association of SMN and eEF1A2. Here the results showed that eEF1A2 redistributed from the cytoplasm to the nucleus in response to serum and epidermal growth factor. In the cytoplasm, compelling evidence showed that staining for myc-tagged eEF1A2 varied in synchrony with that for SMN, consistent with the formation of a SMN-eEF1A2 complex in the cytoplasm of HeLa cells. These findings suggest that eEF1A2 may colocalize with SMN in the cytoplasm and may be a component of the SMN complex. However, the limitation of the ICA method is an inability to resolve colocalization in components of small organelles such as the nucleus.
Abstract: In this paper, a novel corner detection method is
presented to stably extract geometrically important corners.
Intensity-based corner detectors such as the Harris corner can detect
corners in noisy environments but has inaccurate corner position and
misses the corners of obtuse angles. Edge-based corner detectors such
as Curvature Scale Space can detect structural corners but show
unstable corner detection due to incomplete edge detection in noisy
environments. The proposed image-based direct curvature estimation
can overcome limitations in both inaccurate structural corner detection
of the Harris corner detector (intensity-based) and the unstable corner
detection of Curvature Scale Space caused by incomplete edge
detection. Various experimental results validate the robustness of the
proposed method.
Abstract: In this paper a new approach to face recognition is presented that achieves double dimension reduction making the system computationally efficient with better recognition results. In pattern recognition techniques, discriminative information of image increases with increase in resolution to a certain extent, consequently face recognition results improve with increase in face image resolution and levels off when arriving at a certain resolution level. In the proposed model of face recognition, first image decimation algorithm is applied on face image for dimension reduction to a certain resolution level which provides best recognition results. Due to better computational speed and feature extraction potential of Discrete Cosine Transform (DCT) it is applied on face image. A subset of coefficients of DCT from low to mid frequencies that represent the face adequately and provides best recognition results is retained. A trade of between decimation factor, number of DCT coefficients retained and recognition rate with minimum computation is obtained. Preprocessing of the image is carried out to increase its robustness against variations in poses and illumination level. This new model has been tested on different databases which include ORL database, Yale database and a color database. The proposed technique has performed much better compared to other techniques. The significance of the model is two fold: (1) dimension reduction up to an effective and suitable face image resolution (2) appropriate DCT coefficients are retained to achieve best recognition results with varying image poses, intensity and illumination level.
Abstract: The stilling basins are commonly used to dissipate the
energy and protect the downstream floor from erosion. The aim of
the present experimental work is to improve the roughened stilling
basin using T-shape roughness instead of the regular cubic one and
design this new shape. As a result of the present work the best
intensity and the best roughness length are identified. Also, it is
found that the T-shape roughness save materials and reduce the jump
length compared to the cubic one. Sensitivity analysis was performed
and it was noticed that the change in the length of jump is more
sensitive to the change in roughness length than the change in
intensity.
Abstract: Photoplethysmography is a simple measurement of the
variation in blood volume in tissue. It detects the pulse signal of heart
beat as well as the low frequency signal of vasoconstriction and
vasodilation. The transmission type measurement is limited to only a
few specific positions for example the index finger that have a short
path length for light. The reflectance type measurement can be
conveniently applied on most parts of the body surface. This study
analyzed the factors that determine the quality of reflectance
photoplethysmograph signal including the emitter-detector distance,
wavelength, light intensity, and optical properties of skin tissue.
Light emitting diodes (LEDs) with four different visible
wavelengths were used as the light emitters. A phototransistor was
used as the light detector. A micro translation stage adjusts the
emitter-detector distance from 2 mm to 15 mm.
The reflective photoplethysmograph signals were measured on
different sites. The optimal emitter-detector distance was chosen to
have a large dynamic range for low frequency drifting without signal
saturation and a high perfusion index. Among these four wavelengths,
a yellowish green (571nm) light with a proper emitter-detection
distance of 2mm is the most suitable for obtaining a steady and reliable
reflectance photoplethysmograph signal
Abstract: The influences of pulsed electric fields on early
physiological development in Arabidopsis thaliana were studied.
Inside a 4-mm electroporation cuvette, pre-germination seeds were
subjected to high-intensity, nanosecond electrical pulses generated
using laboratory-assembled pulsed electric field system. The field
strength was varied from 5 to 20 kV.cm-1 and the pulse width and the
pulse number were maintained at 10 ns and 100, respectively,
corresponding to the specific treatment energy from 300 J.kg-1 to 4.5
kJ.kg-1. Statistical analyses on the average leaf area 5 and 15 days
following pulsed electric field treatment showed that the effects
appear significant the second week after treatments with a maximum
increase of 80% compared to the control (P < 0.01).
Abstract: The purpose of this article is to study the effects of
plants cover on overland flow and, therefore, its influences on the
amount of eroded and transported soil. In this investigation, all the
experiments were conducted in the LEGHYD laboratory using a
rainfall simulator and a soil tray. The experiments were conducted
using an experimental plot (soil tray) which is 2m long, 0.5 m wide
and 0.15 m deep. The soil used is an agricultural sandy soil (62,08%
coarse sand, 19,14% fine sand, 11,57% silt and 7,21% clay). Plastic
rods (4 mm in diameter) were used to simulate the plants at different
densities: 0 stem/m2 (bared soil), 126 stems/m², 203 stems/m², 461
stems/m² and 2500 stems/m²). The used rainfall intensity is 73mm/h
and the soil tray slope is fixed to 3°. The results have shown that the
overland flow velocities decreased with increasing stems density, and
the density cover has a great effect on sediment concentration.
Darcy–Weisbach and Manning friction coefficients of overland flow
increased when the stems density increased. Froude and Reynolds
numbers decreased with increasing stems density and, consequently,
the flow regime of all treatments was laminar and subcritical. From
these findings, we conclude that increasing the plants cover can
efficiently reduce soil loss and avoid denuding the roots plants.
Abstract: We propose our genuine research of geometric
moments which detects the mineral inadequacy in the frail groundnut
plant. This plant is prone to many deficiencies as a result of the
variance in the soil nutrients. By analyzing the leaves of the plant, we
detect the visual symptoms that are not recognizable to the naked eyes.
We have collected about 160 samples of leaves from the nearby fields.
The images have been taken by keeping every leaf into a black box to
avoid the external interference. For the first time, it has been possible
to provide the farmer with the stages of deficiencies. This paper has
applied the algorithms successfully to many other plants like Lady-s
finger, Green Bean, Lablab Bean, Chilli and Tomato. But we submit
the results of the groundnut predominantly. The accuracy of our
algorithm and method is almost 93%. This will again pioneer a kind of
green revolution in the field of agriculture and will be a boon to that
field.