Abstract: The great majority of the electric installations belong
to the first and second category. In order to ensure a high level of
reliability of their electric system feeder, two power supply sources
are envisaged, one principal, the other of reserve, generally a cold
reserve (electric diesel group).
The principal source being under operation, its control can be ideal
and sure, however for the reserve source being in stop, a preventive
maintenance-s which proceeds on time intervals (periodicity) and
for well defined lengths of time are envisaged, so that this source will
always available in case of the principal source failure.
The choice of the periodicity of preventive maintenance of the
source of reserve influences directly the reliability of the electric
feeder system. On the basis of the semi-markovians processes, the
influence of the periodicity of the preventive maintenance of the
source of reserve is studied and is given the optimal periodicity.
Abstract: Reactive powder concretes (RPC) are characterized by
particle diameter not exceeding 600 μm and having very high
compressive and tensile strengths. This paper describes a new
generation of micro concrete, which has an initial, as well as a final,
high physicomechanical performance. To achieve this, we replaced
the Portland cement (15% by weight) by materials rich in Silica (Slag
and Dune Sand).
The results obtained from tests carried out on RPC show that
compressive and tensile strengths increase when adding the additions,
thus improving the compactness of mixtures via filler and pozzolanic
effect.
With a reduction of the aggregate phase in the RPC and the
abundance of dune sand (south Algeria) and slag (industrial byproduct
of blast furnace), the use of the RPC will allow Algeria to
fulfil economical as well as ecological requirements.
Abstract: During the last decade ultrafine grained (UFG) and nano-structured (NS) materials have experienced a rapid development. In this research work finite element analysis has been carried out to investigate the plastic strain distribution in equal channel angular process (ECAP). The magnitudes of Standard deviation (S. D.) and inhomogeneity index (Ci) were compared for different ECAP passes. Verification of a three-dimensional finite element model was performed with experimental tests. Finally the mechanical property including impact energy of ultrafine grained pure commercially pure Aluminum produced by severe plastic deformation method has been examined. For this aim, equal channel angular pressing die with the channel angle, outer corner angle and channel diameter of 90°, 20° and 20mm had been designed and manufactured. Commercial pure Aluminum billets were ECAPed up to four passes by route BC at the ambient temperature. The results indicated that there is a great improvement at the hardness measurement, yield strength and ultimate tensile strength after ECAP process. It is found that the magnitudes of HV reach 67HV from 21HV after the final stage of process. Also, about 330% and 285% enhancement at the YS and UTS values have been obtained after the fourth pass as compared to the as-received conditions, respectively. On the other hand, the elongation to failure and impact energy have been reduced by 23% and 50% after imposing four passes of ECAP process, respectively.
Abstract: The purpose of this paper is to summarize the
following protection of scouring countermeasures by using
Bentonite-Enhanced Sand (BES) mixtures. The concept of
underground improvement is being used in this study to reduce the
void of the sand. The sand bentonite mixture was used to bond the
ground soil conditions surrounding the pile of integral bridge. The
right composition of sand bentonite mixture was proposed based on
previous findings. The swelling effect of bentonite also was
investigated to ensure there is no adverse impact to the structure of
the integral bridge. ScourScour, another name for severe erosion,
occurs when the erosive capacity of water resulting from natural and
manmade events exceeds the ability of earth materials to resist its
effects. According to AASHTO LRFD Specifications (Section
C3.7.5), scour is the most common reason for the collapse of
highway bridges in the United States
Abstract: The study is about the designed and decorative fabric printing that derived from the Five-color porcelain (Benjarong). The
researcher examined the pattern and creativity of the decorative design
of the Five-color porcelain (Benjarong) by the artists in order to apply
for contemporary arts so that young generation will acknowledge the
importance of the Five-color porcelain (Benjarong). The research methodology is both quantitative and qualitative. The researcher
conducted an in-depth interview with the operator of five-color
porcelain (Benjarong) at Ampawa, Samutsongkram. The information
from the interview can be useful and implemented for designing the
fabric patterns. The researcher found that there were many formats
and designs of the Five-color porcelain (Benjarong) from the past to the present. Its unique design can be applied for the fabric patterns
and ready-to-wear clothes properly. After advertising and showing
the work of the Five-color porcelain (Benjarong) publicly, there were
more young people interested in the Five-color porcelain (Benjarong)
than expected which exceeded the objective with positive attitudes
towards the Five-color porcelain (Benjarong).
Abstract: The present paper deals with the analysis and development of noise-reduction transformer that has a filter function for conductive noise transmission. Two types of prototype noise-reduction transformers with two different output voltages are proposed. To determine an optimum design for the noise-reduction transformer, noise attenuation characteristics are discussed based on the experiments and the equivalent circuit analysis. The analysis gives a relation between the circuit parameters and the noise attenuation. High performance step-down noise-reduction transformer for direct power supply to electronics equipment is developed. The input voltage of the transformer is 100 V and the output voltage is 5 V. Frequency characteristics of noise attenuation are discussed, and prevention of pulse noise transmission is demonstrated. Normal mode noise attenuation of this transformer is –80 dB, and common mode exceeds –90 dB. The step-down noise-reduction transformer eliminates pulse noise efficiently.
Abstract: In this work, we study the impact of dynamically
changing link slowdowns on the stability properties of packetswitched
networks under the Adversarial Queueing Theory
framework. Especially, we consider the Adversarial, Quasi-Static
Slowdown Queueing Theory model, where each link slowdown may
take on values in the two-valued set of integers {1, D} with D > 1
which remain fixed for a long time, under a (w, ¤ü)-adversary. In this
framework, we present an innovative systematic construction for the
estimation of adversarial injection rate lower bounds, which, if
exceeded, cause instability in networks that use the LIS (Longest-in-
System) protocol for contention-resolution. In addition, we show that
a network that uses the LIS protocol for contention-resolution may
result in dropping its instability bound at injection rates ¤ü > 0 when
the network size and the high slowdown D take large values. This is
the best ever known instability lower bound for LIS networks.
Abstract: The X-ray technology has been used in non-destructive evaluation in the Power System, in which a visual non-destructive inspection method for the electrical equipment is provided. However, lots of noise is existed in the images that are got from the X-ray digital images equipment. Therefore, the auto defect detection which based on these images will be very difficult to proceed. A theory on X-ray image de-noising algorithm based on wavelet transform is proposed in this paper. Then the edge detection algorithm is used so that the defect can be pushed out. The result of experiment shows that the method which utilized by this paper is very useful for de-noising on the X-ray images.
Abstract: Equipment miniaturisation offers several opportunities such as an increased surface-to-volume ratio and higher heat transfer coefficients. However, moving towards small-diameter channels demands extra attention to fouling, reliability and stable operation of the system. The present investigation explores possibilities to enhance the stability of the once-through micro evaporator by reducing its flow boiling induced pressure fluctuations. Experimental comparison shows that the measured reduction factor approaches a theoretically derived value. Pressure fluctuations are reduced by a factor of ten in the solid conical channel and a factor of 15 in the porous conical channel. This presumably leads to less backflow and therefore to a better flow control.
Abstract: This experiment discusses the effects of fracture
parameters such as depth, length, width, angle and the number of the
fracture to the conductance properties of laterite using the DUK-2B
digital electrical measurement system combined with the method of
simulating the fractures. The results of experiment show that the
changes of fracture parameters produce effects to the conductance
properties of laterite. There is a clear degressive period of the
conductivity of laterite during increasing the depth, length, width, or
the angle and the quantity of fracture gradually. When the depth of
fracture exceeds the half thickness of the soil body, the conductivity of
laterite shows evidently non-linear diminishing pattern and the
amplitude of decrease tends to increase. The length of fracture has
fewer effects than the depth to the conductivity. When the width of
fracture reaches some fixed values, the change of the conductivity is
less sensitive to the change of the width, and at this time, the
conductivity of laterite maintains at a stable level. When the angle of
fracture is less than 45°, the decrease of the conductivity is more
clearly as the angle increases. But when angle is more than 45°,
change of the conductivity is relatively gentle as the angle increases.
The increasing quantity of the fracture causes the other fracture
parameters having great impact on the change of conductivity. When
moisture content and temperature were unchanged, depth and angle of
fractures are the major factors affecting the conductivity of laterite
soil; quantity, length, and width are minor influencing factors. The
sensitivity of fracture parameters affect conductivity of laterite soil is:
depth >angles >quantity >length >width.
Abstract: During last decades is widely discussed the
international harmonization of financial reporting. This
harmonization is also affected by national tax systems in analyzed
countries. This paper provides some evidence on current national tax
systems in selected countries in Central and Eastern Europe. The
linkage of accounting profit as a tax base might decrease the
administrative burden for majority of SMEs, which are the most
important engine of each national economy.
Abstract: Rainfall records of rainfall station including the
rainfall potential per hour and rainfall mass of five heavy storms are
explored, respectively from 2001 to 2010. The rationalization formula
is to investigate the capability of flood peak duration of flood
detention pond in different rainfall conditions. The stable flood
detention model is also proposed by using system dynamic control
theory to get the message of flood detention pond in this research.
When rainfall frequency of one hour rainfall duration is more than
100-year frequency which exceeds the flood detention standard of
20-year frequency for the flood detention pond, the flood peak
duration of flood detention pond is 1.7 hours at most even though the
flood detention pond with maximum drainage potential about 15.0
m3/s of pumping system is constructed. If the rainfall peak current is
more than maximum drainage potential, the flood peak duration of
flood detention pond is about 1.9 hours at most. The flood detention
pond is the key factor of stable drainage control and flood prevention.
The critical factors of flood disaster is not only rainfall mass, but also
rainfall frequency of heavy storm in different rainfall duration and
flood detention frequency of flood detention system.
Abstract: 98% of the energy needed in Taiwan has been
imported. The prices of petroleum and electricity have been
increasing. In addition, facility capacity, amount of electricity
generation, amount of electricity consumption and number of Taiwan
Power Company customers have continued to increase. For these
reasons energy conservation has become an important topic. In the
past linear regression was used to establish the power consumption
models for chillers. In this study, grey prediction is used to evaluate
the power consumption of a chiller so as to lower the total power
consumption at peak-load (so that the relevant power providers do not
need to keep on increasing their power generation capacity and facility
capacity).
In grey prediction, only several numerical values (at least four
numerical values) are needed to establish the power consumption
models for chillers. If PLR, the temperatures of supply chilled-water
and return chilled-water, and the temperatures of supply cooling-water
and return cooling-water are taken into consideration, quite accurate
results (with the accuracy close to 99% for short-term predictions)
may be obtained. Through such methods, we can predict whether the
power consumption at peak-load will exceed the contract power
capacity signed by the corresponding entity and Taiwan Power
Company. If the power consumption at peak-load exceeds the power
demand, the temperature of the supply chilled-water may be adjusted
so as to reduce the PLR and hence lower the power consumption.
Abstract: The impact of noise upon live quality has become an
important aspect to make both urban and environmental policythroughout
Europe and in Turkey. Concern over the quality of urban
environments, including noise levels and declining quality of green
space, is over the past decade with increasing emphasis on designing
livable and sustainable communities. According to the World Health
Organization, noise pollution is the third most hazardous
environmental type of pollution which proceeded by only air (gas
emission) and water pollution. The research carried out in two
phases, the first stage of the research noise and plant types providing
the suction of noise was evaluated through literature study and at the
second stage, definite types (Juniperus horizontalis L., Spirea
vanhouetti Briot., Cotoneaster dammerii C.K., Berberis thunbergii
D.C., Pyracantha coccinea M. etc.) were selected for the city of
Konya. Trials were conducted on the highway of Konya. The biggest
value of noise reduction was 6.3 dB(A), 4.9 dB(A), 6.2 dB(A) value
with compared to the control which includes the group that formed
by the bushes at the distance of 7m, 11m, 20m from the source and
5m, 9m, 20m of plant width, respectively. In this paper, definitions
regarding to noise and its sources were made and the precautions
were taken against to noise that mentioned earlier with the adverse
effects of noise. Plantation design approaches and suggestions
concerning to the diversity to be used, which are peculiar to roadside,
were developed to discuss the role and the function of plant material
to reduce the noise of the traffic.
Abstract: We succeeded to produce a high performance and flexible graphene/Manganese dioxide (G/MnO2) electrode coated on flexible polyethylene terephthalate (PET) substrate. The graphene film is initially synthesized by drop-casting the graphene oxide (GO) solution on the PET substrate, followed by simultaneous reduction and patterning of the dried film using carbon dioxide (CO2) laser beam with power of 1.8 W. Potentiostatic Anodic Deposition method was used to deposit thin film of MnO2 with different loading mass 10 – 50 and 100 μg.cm-2 on the pre-prepared graphene film. The electrodes were fully characterized in terms of structure, morphology, and electrochemical performance. A maximum specific capacitance of 973 F.g-1 was attributed when depositing 50μg.cm-2 MnO2 on the laser reduced graphene oxide rGO (or G/50MnO2) and over 92% of its initial capacitance was retained after 1000 cycles. The good electrochemical performance and long-term cycling stability make our proposed approach a promising candidate in the supercapacitor applications.
Abstract: Malaysian corporations going global increased
many folds. The shift from domestic to international operations
requires increased expatriation to achieve global business goals.
Therefore, this study aims to identify the determinants for success
in expatriation of Malaysian international corporations. There are
certain attributes necessary for a global employee to succeed in
international assignment. Self-administered questionnaires were
sent to 327 respondents with a response rate of 35.2 percent. The
results indicated that most Malaysian manufacturers are involved
in expatriation. For a global employee to succeed in an
international assignment, the ability to work in international teams
was identified and ranked as the most important factor in
determining the effectiveness of expatriation followed by language
proficiency, adaptability to the international assignment and
expatriate sensitivity to cultural elements. The results support
previous research with regard to the importance of an effective
expatriation selection process in order for a company-s
international expansion strategy to succeed.
Abstract: On the basis of Bayesian inference using the
maximizer of the posterior marginal estimate, we carry out phase
unwrapping using multiple interferograms via generalized mean-field
theory. Numerical calculations for a typical wave-front in remote
sensing using the synthetic aperture radar interferometry, phase
diagram in hyper-parameter space clarifies that the present method
succeeds in phase unwrapping perfectly under the constraint of
surface- consistency condition, if the interferograms are not corrupted
by any noises. Also, we find that prior is useful for extending a phase
in which phase unwrapping under the constraint of the
surface-consistency condition. These results are quantitatively
confirmed by the Monte Carlo simulation.
Abstract: The fault current levels through the electric devices
have a significant impact on failure probability. New fault current
results in exceeding the rated capacity of circuit breaker and switching
equipments and changes operation characteristic of overcurrent relay.
In order to solve these problems, SFCL (Superconducting Fault
Current Limiter) has rising as one of new alternatives so as to improve
these problems. A fault current reduction differs depending on
installed location. Therefore, a location of SFCL is very important.
Also, SFCL decreases the fault current, and it prevents surrounding
protective devices to be exposed to fault current, it then will bring a
change of reliability. In this paper, we propose method which
determines the optimal location when SFCL is installed in power
system. In addition, the reliability about the power system which
SFCL was installed is evaluated. The efficiency and effectiveness of
this method are also shown by numerical examples and the reliability
indices are evaluated in this study at each load points. These results
show a reliability change of a system when SFCL was installed.
Abstract: The use of buffer thresholds, blocking and adequate
service strategies are well-known techniques for computer networks
traffic congestion control. This motivates the study of series queues
with blocking, feedback (service under Head of Line (HoL) priority
discipline) and finite capacity buffers with thresholds. In this paper,
the external traffic is modelled using the Poisson process and the
service times have been modelled using the exponential distribution.
We consider a three-station network with two finite buffers, for
which a set of thresholds (tm1 and tm2) is defined. This computer
network behaves as follows. A task, which finishes its service at
station B, gets sent back to station A for re-processing with
probability o. When the number of tasks in the second buffer exceeds
a threshold tm2 and the number of task in the first buffer is less than
tm1, the fed back task is served under HoL priority discipline. In
opposite case, for fed backed tasks, “no two priority services in
succession" procedure (preventing a possible overflow in the first
buffer) is applied. Using an open Markovian queuing schema with
blocking, priority feedback service and thresholds, a closed form
cost-effective analytical solution is obtained. The model of servers
linked in series is very accurate. It is derived directly from a twodimensional
state graph and a set of steady-state equations, followed
by calculations of main measures of effectiveness. Consequently,
efficient expressions of the low computational cost are determined.
Based on numerical experiments and collected results we conclude
that the proposed model with blocking, feedback and thresholds can
provide accurate performance estimates of linked in series networks.
Abstract: Nowadays, the focus on renewable energy and alternative fuels has increased due to increasing oil prices, environment pollution, and also concern on preserving the nature. Biodiesel has been known as an attractive alternative fuel although biodiesel produced from edible oil is very expensive than conventional diesel. Therefore, the uses of biodiesel produced from non-edible oils are much better option. Currently Jatropha biodiesel (JBD) is receiving attention as an alternative fuel for diesel engine. Biodiesel is non-toxic, biodegradable, high lubricant ability, highly renewable, and its use therefore produces real reduction in petroleum consumption and carbon dioxide (CO2) emissions. Although biodiesel has many advantages, but it still has several properties need to improve, such as lower calorific value, lower effective engine power, higher emission of nitrogen oxides (NOX) and greater sensitivity to low temperature. Exhaust gas recirculation (EGR) is effective technique to reduce NOX emission from diesel engines because it enables lower flame temperature and oxygen concentration in the combustion chamber. Some studies succeeded to reduce the NOX emission from biodiesel by EGR but they observed increasing soot emission. The aim of this study was to investigate the engine performance and soot emission by using blended Jatropha biodiesel with different EGR rates. A CI engine that is water-cooled, turbocharged, using indirect injection system was used for the investigation. Soot emission, NOX, CO2, carbon monoxide (CO) were recorded and various engine performance parameters were also evaluated.