Abstract: Repeated additions of the unfertilized bacteria led to
increase the activity of Nitrogen-fixing bacteria in the root zone with
drip irrigation system compared to traditional manual vaccination to
increase the proportion of Nitrogen from 29% to 64%, and the
efficiency of adding Nitrogen fertilizer did not exceed 9.5% while
dropped to 4%, due to the amount of fertilizer added was not exceed
20kg N/h, and the second was the existence of a large amount of
available Nitrogen in the soil by fixation, while the efficiency of
irrigation system between 2.08 to 2.26 kg/m3.
Abstract: Space Vector Modulation (SVM) is an optimum Pulse Width Modulation (PWM) technique for an inverter used in a variable frequency drive applications. It is computationally rigorous and hence limits the inverter switching frequency. Increase in switching frequency can be achieved using Neural Network (NN) based SVM, implemented on application specific chips. This paper proposes a neural network based SVM technique for a Voltage Source Inverter (VSI). The network proposed is independent of switching frequency. Different architectures are investigated keeping the total number of neurons constant. The performance of the inverter is compared for various switching frequencies for different architectures of NN based SVM. From the results obtained, the network with minimum resource and appropriate word length is identified. The bit precision required for this application is identified. The network with 8-bit precision is implemented in the IC XCV 400 and the results are presented. The performance of NN based general purpose SVM with higher bit precision is discussed.
Abstract: The dynamic spectrum allocation solutions such as
cognitive radio networks have been proposed as a key technology to
exploit the frequency segments that are spectrally underutilized.
Cognitive radio users work as secondary users who need to
constantly and rapidly sense the presence of primary users or
licensees to utilize their frequency bands if they are inactive. Short
sensing cycles should be run by the secondary users to achieve
higher throughput rates as well as to provide low level of interference
to the primary users by immediately vacating their channels once
they have been detected. In this paper, the throughput-sensing time
relationship in local and cooperative spectrum sensing has been
investigated under two distinct scenarios, namely, constant primary
user protection (CPUP) and constant secondary user spectrum
usability (CSUSU) scenarios. The simulation results show that the
design of sensing slot duration is very critical and depends on the
number of cooperating users under CPUP scenario whereas under
CSUSU, cooperating more users has no effect if the sensing time
used exceeds 5% of the total frame duration.
Abstract: Structural Integrity Management (SIM) is
important for the protection of offshore crew, environment, business assets and company and industry reputation. API RP 2A contained guidelines for assessment of existing platforms mostly for the Gulf
of Mexico (GOM). ISO 19902 SIM framework also does not
specifically cater for Malaysia. There are about 200 platforms in
Malaysia with 90 exceeding their design life. The Petronas Carigali
Sdn Bhd (PCSB) uses the Asset Integrity Management System and
the very subjective Risk based Inspection Program for these
platforms. Petronas currently doesn-t have a standalone Petronas
Technical Standard PTS-SIM. This study proposes a recommended
practice for the SIM process for offshore structures in Malaysia,
including studies by API and ISO and local elements such as the
number of platforms, types of facilities, age and risk ranking. Case
study on SMG-A platform in Sabah shows missing or scattered
platform data and a gap in inspection history. It is to undergo a level
3 underwater inspection in year 2015.
Abstract: With respect to the dissipation of energy through
plastic deformation of joints of prefabricated wall units, the paper
points out the principal importance of efficient reinforcement of the
prefabricated system at its joints. The method, quality and amount of
reinforcement are essential for reaching the necessary degree of joint
ductility. The paper presents partial results of experimental research
of vertical joints of prefabricated units exposed to monotonously
rising loading and repetitive shear force and formulates a conclusion
that the limit state of the structure as a whole is preceded by the
disintegration of joints, or that the structure tends to pass from
linearly elastic behaviour to non-linearly elastic to plastic behaviour
by exceeding the proportional elastic limit in joints.Experimental
verification on a model of a 7-storey prefabricated structure revealed
weak points in its load-bearing systems, mainly at places of critical
points around openings situated in close proximity to vertical joints
of mutually perpendicularly oriented walls.
Abstract: Many applications require surface modification and
micro-structuring of polymers. For these purposes is mainly used
ultraviolet (UV) radiation from excimer lamps or excimer lasers.
However, these sources have a decided disadvantage - degrading the
polymer deep inside due to relatively big radiation penetration depth
which may exceed 100 μm. In contrast, extreme ultraviolet (EUV)
radiation is absorbed in a layer approximately 100 nm thick only. In
this work, the radiation from a discharge-plasma EUV source (with
wavelength 46.9 nm) based on a capillary discharge driver is focused
with a spherical Si/Sc multilayer mirror for surface modification of
PMMA sample or thin gold layer (thickness about 40 nm). It was
found that the focused EUV laser beam is capable by one shot to
ablate PMMA or layer of gold, even if the focus is significantly
influenced by astigmatism.
Abstract: The main features of NPP-2006/MIR-1200 design are
described. Estimation of individual doses for population under
normal operation and accident conditions is performed for
Leningradskaya NPP – 2 as an example. The radiation effect on
population and environment doesn-t exceed the established
normative limit and is as low as reasonably achievable. NPP-
2006/MIR-1200 design meets all Russian and international
requirements for power units under construction.
Abstract: In the current study, we have conducted an experimental investigation on the utilization of electronic arc furnace (EAF) reducing slag for the absorption of CO2 via wet grinding method. It was carried out by various grinding conditions. The slag was ground in the vibrating ball mill in the presence of CO2 and pure water under ambient temperature. The reaction behavior was monitored with constant pressure method, and the changes of experimental systems volume as a function of grinding time were measured. It was found that the CO2 absorption occurred as soon as the grinding started. The CO2 absorption was significantly increased in the case of wet grinding compare to the dry grinding. Generally, the amount of CO2 absorption increased as the amount of water, weight of slag and initial pressure increased. However, it was decreased when the amount of water exceeds 200ml and when smaller balls were used. The absorption of CO2 occurred simultaneously with the start of the grinding and it stopped when the grinding was stopped. According to this research, the CO2 reacted with the CaO inside the slag, forming CaCO3.
Abstract: In this article, the authors reviewed and analyzed the survey materials similarities ornament proto-Turkic and northern Indians. The study examined the materials scientists - geneticists, archaeologists, anthropologists. Numerous studies of scientists from different directions once again prove the relevance of the topic. The authors approached the subject from an artistic side. The study authors have made the appropriate conclusions. This publication is based on the proceedings of the investigation.
Abstract: Ovshinsky initiated scientific research in the field of
amorphous and disordered materials that continues to this day. The
Ovshinsky Effect where the resistance of thin GST films is
significantly reduced upon the application of low voltage is of
fundamental importance in phase-change - random access memory
(PC-RAM) devices.GST stands for GdSbTe chalcogenide type
glasses.However, the Ovshinsky Effect is not without controversy.
Ovshinsky thought the resistance of GST films is reduced by the
redistribution of charge carriers; whereas, others at that time including
many PC-RAM researchers today argue that the GST resistance
changes because the GST amorphous state is transformed to the
crystalline state by melting, the heat supplied by external heaters. In
this controversy, quantum mechanics (QM) asserts the heat capacity of
GST films vanishes, and therefore melting cannot occur as the heat
supplied cannot be conserved by an increase in GST film
temperature.By precluding melting, QM re-opens the controversy
between the melting and charge carrier mechanisms. Supporting
analysis is presented to show that instead of increasing GST film
temperature, conservation proceeds by the QED induced creation of
photons within the GST film, the QED photons confined by TIR. QED
stands for quantum electrodynamics and TIR for total internal
reflection. The TIR confinement of QED photons is enhanced by the
fact the absorbedheat energy absorbed in the GST film is concentrated
in the TIR mode because of their high surface to volume ratio. The
QED photons having Planck energy beyond the ultraviolet produce
excitons by the photoelectric effect, the electrons and holes of which
reduce the GST film resistance.
Abstract: Exposure to radon occurs when breathing airborne
radon while using water: showering, washing dishes, cooking, and
drinking water that contain radon. The results of radon activity
measurements in water from public drinking fountain in city of Novi
Sad, Serbia is presented in this paper. Radon level in some samples
exceeded EPA (Environmental Protection Agency) recommendation
for maximum contaminant level (MCL) for radon in drinking water
of 11.1 Bq/l.
Abstract: Does the spatial perspective provide a common thread for rural sociology? Have rural sociologists succeeded in bringing order to their data using spatial analysis models and techniques? A trial answer to such questions, as touchstones of theoretical and applied sociological studies in rural areas, is the point at issue in the present paper. Spatial analyses have changed the way rural sociologists approach scientific problems. Rural sociology is spatial by nature because much, if not most, of its research topics has a spatial “awareness." However, such spatial awareness is not quite the same as spatial analysis because it is not typically associated with underlying theories and hypotheses about spatial patterns that are designed to be tested for their specific spatial content. This paper presents pressing issues for future research to reintroduce mainstream rural sociology to the concept of space.
Abstract: Studies on the distribution of traffic demands have
been proceeding by providing traffic information for reducing
greenhouse gases and reinforcing the road's competitiveness in the
transport section, however, since it is preferentially required the
extensive studies on the driver's behavior changing routes and its
influence factors, this study has been developed a discriminant model
for changing routes considering driving conditions including traffic
conditions of roads and driver's preferences for information media. It
is divided into three groups depending on driving conditions in group
classification with the CART analysis, which is statistically
meaningful. And the extent that driving conditions and preferred
media affect a route change is examined through a discriminant
analysis, and it is developed a discriminant model equation to predict a
route change. As a result of building the discriminant model equation,
it is shown that driving conditions affect a route change much more,
the entire discriminant hit ratio is derived as 64.2%, and this
discriminant equation shows high discriminant ability more than a
certain degree.
Abstract: The friction between two metal surfaces results in a
high frequency noise (squealing) which also occurs during the
braking of wagons with rail brakes in the process of shunting at a
marshalling yard with a hump. At that point the noise level may
exceed 130dB, which is extremely unpleasant for workers and
inhabitants. In our research we developed a new composite material
which does not change braking properties, is capable of taking
extremely high pressure loads, reduces noise and is environmentally
friendly. The noise reduction results had been very good and had
shown a decrease of the high frequency noise almost completely (by
99%) at its source. With our technology we had also reduced general
noise by more than 30dBA.
Abstract: Serial hierarchical support vector machine (SHSVM)
is proposed to discriminate three brain tissues which are white matter
(WM), gray matter (GM), and cerebrospinal fluid (CSF). SHSVM
has novel classification approach by repeating the hierarchical
classification on data set iteratively. It used Radial Basis Function
(rbf) Kernel with different tuning to obtain accurate results. Also as
the second approach, segmentation performed with DAGSVM
method. In this article eight univariate features from the raw DTI data
are extracted and all the possible 2D feature sets are examined within
the segmentation process. SHSVM succeed to obtain DSI values
higher than 0.95 accuracy for all the three tissues, which are higher
than DAGSVM results.
Abstract: This is an application research presenting the
improvement of production quality using the six sigma solutions and
the analyses of benefit-cost ratio. The case of interest is the
production of tile-concrete. Such production has faced with the
problem of high nonconforming products from an inappropriate
surface coating and had low process capability based on the strength
property of tile. Surface coating and tile strength are the most critical
to quality of this product. The improvements followed five stages of
six sigma solutions. After the improvement, the production yield was
improved to 80% as target required and the defective products from
coating process was remarkably reduced from 29.40% to 4.09%. The
process capability based on the strength quality was increased from
0.87 to 1.08 as customer oriented. The improvement was able to save
the materials loss for 3.24 millions baht or 0.11 million dollars. The
benefits from the improvement were analyzed from (1) the reduction
of the numbers of non conforming tile using its factory price for
surface coating improvement and (2) the materials saved from the
increment of process capability. The benefit-cost ratio of overall
improvement was high as 7.03. It was non valuable investment in
define, measure, analyses and the initial of improve stages after that
it kept increasing. This was due to there were no benefits in define,
measure, and analyze stages of six sigma since these three stages
mainly determine the cause of problem and its effects rather than
improve the process. The benefit-cost ratio starts existing in the
improve stage and go on. Within each stage, the individual benefitcost
ratio was much higher than the accumulative one as there was an
accumulation of cost since the first stage of six sigma. The
consideration of the benefit-cost ratio during the improvement
project helps make decisions for cost saving of similar activities
during the improvement and for new project. In conclusion, the
determination of benefit-cost ratio behavior through out six sigma
implementation period provides the useful data for managing quality
improvement for the optimal effectiveness. This is the additional
outcome from the regular proceeding of six sigma.
Abstract: Textures are replications, symmetries and
combinations of various basic patterns, usually with some random
variation one of the gray-level statistics. This article proposes a
new approach to Segment texture images. The proposed approach
proceeds in 2 stages. First, in this method, local texture information
of a pixel is obtained by fuzzy texture unit and global texture
information of an image is obtained by fuzzy texture spectrum.
The purpose of this paper is to demonstrate the usefulness of fuzzy
texture spectrum for texture Segmentation.
The 2nd Stage of the method is devoted to a decision process,
applying a global analysis followed by a fine segmentation,
which is only focused on ambiguous points. The above Proposed
approach was applied to brain image to identify the components
of brain in turn, used to locate the brain tumor and its Growth
rate.
Abstract: Webcam systems now function as the new privileged
vantage points from which to view the city. This transformation of
CCTV technology from surveillance to promotional tool is significant
because its'scopic regime' presents, back to the public, a new virtual
'site' that sits alongside its real-time counterpart. Significantly,
thisraw 'image' data can, in fact,be co-optedand processed so as to
disrupt their original purpose. This paper will demonstrate this
disruptive capacity through an architectural project. It will reveal how
the adaption the webcam image offers a technical springboard by
which to initiate alternate urban form making decisions and subvert
the disciplinary reliance on the 'flat' orthographic plan. In so doing,
the paper will show how this 'digital material' exceeds the imagistic
function of the image; shiftingit from being a vehicle of signification
to a site of affect.
Abstract: In the way of growing and developing firms especially
high-tech firms, on many occasions manager of firm is mainly involved in solving problems of his business and decision making about executive activities of the firm, while besides executive
measures, attention to planning of firm's success and growth way and
application of long experience and sagacity in designing business model are vital and necessary success in a business is achieved as a
result of different factors, one of the most important of them is designing and performing an optimal business model at the beginning
of the firm's work. This model is determining the limit of profitability
achieved by innovation and gained value added. Therefore, business
model is the process of connecting innovation environment and
technology with economic environment and business and is important
for succeeding modern businesses considering their traits.
Abstract: The Chiu-s method which generates a Takagi-Sugeno Fuzzy Inference System (FIS) is a method of fuzzy rules extraction. The rules output is a linear function of inputs. In addition, these rules are not explicit for the expert. In this paper, we develop a method which generates Mamdani FIS, where the rules output is fuzzy. The method proceeds in two steps: first, it uses the subtractive clustering principle to estimate both the number of clusters and the initial locations of a cluster centers. Each obtained cluster corresponds to a Mamdani fuzzy rule. Then, it optimizes the fuzzy model parameters by applying a genetic algorithm. This method is illustrated on a traffic network management application. We suggest also a Mamdani fuzzy rules generation method, where the expert wants to classify the output variables in some fuzzy predefined classes.