Abstract: This paper presents a generalized form of the
mechanistic deconvolution technique (GMD) to modeling image sensors applicable in various pan–tilt planes of view. The mechanistic deconvolution technique (UMD) is modified with the
given angles of a pan–tilt plane of view to formulate constraint parameters and characterize distortion effects, and thereby, determine
the corrected image data. This, as a result, does not require experimental setup or calibration. Due to the mechanistic nature of
the sensor model, the necessity for the sensor image plane to be
orthogonal to its z-axis is eliminated, and it reduces the dependency on image data. An experiment was constructed to evaluate the
accuracy of a model created by GMD and its insensitivity to changes in sensor properties and in pan and tilt angles. This was compared
with a pre-calibrated model and a model created by UMD using two sensors with different specifications. It achieved similar accuracy
with one-seventh the number of iterations and attained lower mean error by a factor of 2.4 when compared to the pre-calibrated and
UMD model respectively. The model has also shown itself to be robust and, in comparison to pre-calibrated and UMD model, improved the accuracy significantly.
Abstract: Rapid growth of distance learning resulted in
importance to conduct research on students- satisfaction with distance
learning because differences in students- satisfaction might influence
educational opportunities for learning in a relevant Web-based
environment. In line with this, this paper deals with satisfaction of
students with distance module at Faculty of organizational sciences
(FOS) in Serbia as well as some factors affecting differences in their
satisfaction . We have conducted a research on a population of 68
first-year students of distance learning studies at FOS. Using
statistical techniques, we have found out that there is no significant
difference in students- satisfaction with distance learning module
between men and women. In the same way, we also concluded that
there is a difference in satisfaction with distance learning module
regarding to student-s perception of opportunity to gain knowledge as
the classic students.
Abstract: The private theme parks are gradually surpassing
public-owned scenic areas after many years of development and have
become a mainstream choice for domestic tourists. Previous studies
show that visitors from different backgrounds differ in consumer
behavior and satisfaction factors. An understanding of visitor
satisfaction is therefore of extreme importance to operators of
privately-owned theme parks. Importance-Performance Analysis (IPA)
is used to measure consumer's potential satisfaction with services and
has become a widely used management tool for strength and weakness
analysis for brands, products, services and point of sales. As IPA has
so far not been used to evaluate the visitor satisfaction with
privately-owned theme parks, in this study the IPA method is used to
analyze visitor satisfaction with Janfusun Fancyworld (one of the most
popular private theme parks in Taiwan) and to rank visitor focus and
satisfaction on/in theme park facilities and services. Results of the
analysis provide private theme park operators with an understanding
of user or consumer demands as well as an assessment of the quality of
services currently offered.
Abstract: In this document, we have proposed a robust
conceptual strategy, in order to improve the robustness against the manufacturing defects and thus the reliability of logic CMOS circuits. However, in order to enable the use of future CMOS
technology nodes this strategy combines various types of design:
DFR (Design for Reliability), techniques of tolerance: hardware
redundancy TMR (Triple Modular Redundancy) for hard error
tolerance, the DFT (Design for Testability. The Results on largest ISCAS and ITC benchmark circuits show that our approach improves
considerably the reliability, by reducing the key factors, the area costs and fault tolerance probability.
Abstract: Flat double-layer grid is from category of space structures that are formed from two flat layers connected together with diagonal members. Increased stiffness and better seismic resistance in relation to other space structures are advantages of flat double layer space structures. The objective of this study is assessment and calculation of Behavior factor of flat double layer space structures. With regarding that these structures are used widely but Behavior factor used to design these structures against seismic force is not determined and exact, the necessity of study is obvious. This study is theoretical. In this study we used structures with span length of 16m and 20 m. All connections are pivotal. ANSYS software is used to non-linear analysis of structures.
Abstract: Flood management is one of the important fields in
urban storm water management. Floods are influenced by the
increase of huge storm event, or improper planning of the area. This study mainly provides the flood protection in four stages; planning,
flood event, responses and evaluation. However it is most effective then flood protection is considered in planning/design and
evaluation stages since both stages represent the land development of the area. Structural adjustments are often more reliable than nonstructural
adjustments in providing flood protection, however
structural adjustments are constrained by numerous factors such as
political constraints and cost. Therefore it is important to balance
both adjustments with the situation. The technical decisions provided
will have to be approved by the higher-ups who have the power to
decide on the final solution. Costs however, are the biggest factor in
determining the final decision. Therefore this study recommends
flood protection system should have been integrated and enforces
more in the early stages (planning and design) as part of the storm
water management plan. Factors influencing the technical decisions
provided should be reduced as low as possible to avoid a reduction in
the expected performance of the proposed adjustments.
Abstract: One challenging direction of mobile commerce (mcommerce)
that is getting a great deal of attention globally is mobile
financing. The smart-phone and PDA users all around the world are
facing difficulties to become accustomed and trust in m-commerce.
The main rationale can be the slow variation and lack of trust in
mobile payment systems. Mobile payment systems that are in use
need to be more effective and efficient. This paper proposes: the
interface design is not the only factor affecting the m-commerce
adoption and lack of trust; in fact it is the combined effect of
interface usability and trustworthy mobile payment systems, because
it-s the money that the user has to spend at the end of the day, which
the user requires to get transferred securely. The purpose of this
research is to identify the problems regarding the trust and adaption
of m-commerce applications by mobile users and to provide the best
possible solution with respect to human computer interaction (HCI)
principles.
Abstract: Well-being has been given special emphasis in quality
of life. It involves living a meaningful, life satisfaction, stability and
happiness in life. Well-being also concerns the satisfaction of
physical, psychological, social needs and demands of an individual.
The purpose of this study was to validate three-factor measurement
model of well-being using structural equation modeling (SEM). The
conceptions of well-being measured such dimensions as physical,
psychological and social well-being. This study was done based on a
total sample of 650 adolescents from east-coast of peninsular
Malaysia. The Well-Being Scales which was adapted from [1] was
used in this study. The items were hypothesized a priori to have nonzero
loadings on all dimensions in the model. The findings of the
SEM demonstrated that it is a good fitting model which the proposed
model fits the driving theory; (x2df = 1.268; GFI = .994; CFI = .998;
TLI= .996; p = .255; RMSEA = .021). Composite reliability (CR)
was .93 and average variance extracted (AVE) was 58%. The model
in this study fits with the sample of data and well-being is important
to bring sustainable development to the mainstream.
Abstract: In this research, Response Surface Methodology (RSM) is used to investigate the effect of four controllable input variables namely: discharge current, pulse duration, pulse off time and applied voltage Surface Roughness (SR) of on Electrical Discharge Machined surface. To study the proposed second-order polynomial model for SR, a Central Composite Design (CCD) is used to estimation the model coefficients of the four input factors, which are alleged to influence the SR in Electrical Discharge Machining (EDM) process. Experiments were conducted on AISI D2 tool steel with copper electrode. The response is modeled using RSM on experimental data. The significant coefficients are obtained by performing Analysis of Variance (ANOVA) at 5% level of significance. It is found that discharge current, pulse duration, and pulse off time and few of their interactions have significant effect on the SR. The model sufficiency is very satisfactory as the Coefficient of Determination (R2) is found to be 91.7% and adjusted R2-statistic (R2 adj ) 89.6%.
Abstract: In automatic manufacturing and assembling of mechanical, electrical and electronic parts one needs to reliably identify the position of components and to extract the information of these components. Data Matrix Codes (DMC) are established by these days in many areas of industrial manufacturing thanks to their concentration of information on small spaces. In today’s usually order-related industry, where increased tracing requirements prevail, they offer further advantages over other identification systems. This underlines in an impressive way the necessity of a robust code reading system for detecting DMC on the components in factories. This paper compares two methods for estimating the angle of orientation of Data Matrix Codes: one method based on the Hough Transform and the other based on the Mean Shift Algorithm. We concentrate on Data Matrix Codes in industrial environment, punched, milled, lasered or etched on different materials in arbitrary orientation.
Abstract: This paper presents Simulated Annealing based
approach to estimate solar cell model parameters. Single diode solar
cell model is used in this study to validate the proposed approach
outcomes. The developed technique is used to estimate different
model parameters such as generated photocurrent, saturation current,
series resistance, shunt resistance, and ideality factor that govern the
current-voltage relationship of a solar cell. A practical case study is
used to test and verify the consistency of accurately estimating
various parameters of single diode solar cell model. Comparative
study among different parameter estimation techniques is presented
to show the effectiveness of the developed approach.
Abstract: This paper introduces a method of calculating the
quantities of construction materials and construction waste on site in
city of Novi Sad. In buildings is about 40% of the total weight of
materials that are in circulation in the world economic space. The
best solution for this waste is to be stored at source, at the point of
generation. There are several treatment options for this type of waste,
reduction at source, reuse, recycling. Beside its negative effects on
the environment, construction waste can be and resource. Novi Sad is
divided in 16 single family resident zones and 10 multi family
resident zones. For every zone of the city, quantities of used
construction materials and construction waste were obtained.
Rational use of natural resources is an essential factor in applying the
principles of development with savings.
Abstract: Air quality in Setapak district of Kuala Lumpur was
studied by analysing the rainwater chemical composition using ion
chromatography method. Twelve sampling sites were selected and
120 rainwater samples were collected in the period of 10 weeks. The
results of this study were compared to the earlier published data and
the evaluation showed that the NO3
- ion concentration increased from
0.41 to 3.32 ppm, while SO4
2- ion concentration increased from 0.39
to 3.26 ppm over the past two decades that is mostly due to rapid
urban development of the city. However, it was found that the
chemical composition for both residential and industrial areas does
not have significant difference. Most of the rainwater samples
showed alkaline pH (pH > 5.6). The possible factors for such alkaline
pH in rainwater samples are assumed to be the marine sources,
biomass burning and alkaline character of soil particles.
Abstract: This evaluation of land supply system performance in
China shall examine the combination of government functions and
national goals in order to perform a cost-benefit analysis of system
results. From the author's point of view, it is most productive to
evaluate land supply system performance at moments of system
transformation for the following reasons. The behavior and
input-output change of beneficial results at different times can be
observed when the system or policy changes and system performance
can be evaluated through a cost-benefit analysis during the process of
system transformation. Moreover, this evaluation method can avoid
the influence of land resource endowment. Different land resource
endowment methods and different economy development periods
result in different systems. This essay studies the contents, principles
and methods of land supply system performance evaluation. Taking
Beijing as an example, this essay optimizes and classifies the land
supply index, makes a quantitative evaluation of land supply system
performance through principal component analysis (PCA), and finally
analyzes the factors that influence land supply system performance at
times of system transformation.
Abstract: Age at first marriage is a basic temporal term that is
culturally constructed for marriage relationship between an adult
male and an adult female intended to have sex, to reproduce and to
adapt to environment from one generation to another around the
world. Cross-cultural evidences suggest that age at first marriage for
both male and female not only varies across the cultures, but also
varies among the subcultures of the same society. The purpose of the
study was to compare age at first marriage for husband and wife
including age differences between them between Muslim and Santal
communities in rural Bangladesh. For this we hypothesized that (1)
there were significant differences in age at first marriage and age
interval between husband and wife between Muslim and Santal
communities in rural Bangladesh. In so doing, 288 couples (145 pairs
of couples for Muslim and 143 pairs of couples for Santal) were
selected by cluster random sampling from the Kalna village situated
in the Tanore Upazila of Rajshahi district, Bangladesh, whose
current mean age range was 36.59 years for husband and 28.85 years
for wife for the Muslim and 31.74 years for husband and 25.21 years
for wife for the Santal respectively. The results of Independent
Sample t test showed that mean age at first marriage for the Muslim
samples was 23.05 years for husbands and 15.11 years for wives,
while mean age at first marriage for the Santal samples was 20.71
years for husbands and 14.34 years for wives respectively that were
significantly different at p0.05) among the selected husbands
and wives between the two communities. This study recommends
that further cross-cultural researches should be done on the causeeffect
relationships between socio-cultural factors and age at
marriage between the two communities in Bangladesh.
Abstract: This study was carried out to investigate lamb mortalities relating to ewes' breed and some managemental factors on 250 pregnant ewes (190-Rahmani, 30-Ossimi and 30-Romanov) at Mehallet Mousa, Animal Production Research Station, Kafr El- Sheikh Province, Egypt. These animals divided into five groups according to the managemental factors used. The results revealed that the lamb mortality was higher in Ossimi breed and lower in Romanov one. In addition, the highest lamb mortality occurred among lambs for unsupplemented ewes, for those had body condition score two and for lambs which born outdoor. Moreover, the lamb survivability was increased by the parity of ewes. From this study it can be concluded that the lamb mortality depends on ewes' body condition score, parity, lambing system (indoor or outdoor), nutrition during pregnancy period and selected breed. In addition, the most important period for lamb survival is the first week of age.
Abstract: Evaporator is an important and widely used heat
exchanger in air conditioning and refrigeration industries. Different
methods have been used by investigators to increase the heat transfer
rates in evaporators. One of the passive techniques to enhance heat
transfer coefficient is the application of microfin tubes. The
mechanism of heat transfer augmentation in microfin tubes is
dependent on the flow regime of two-phase flow. Therefore many
investigations of the flow patterns for in-tube evaporation have been
reported in literatures. The gravitational force, surface tension and
the vapor-liquid interfacial shear stress are known as three dominant
factors controlling the vapor and liquid distribution inside the tube. A
review of the existing literature reveals that the previous
investigations were concerned with the two-phase flow pattern for
flow boiling in horizontal tubes [12], [9]. Therefore, the objective of
the present investigation is to obtain information about the two-phase
flow patterns for evaporation of R-134a inside horizontal smooth and
microfin tubes. Also Investigation of heat transfer during flow
boiling of R-134a inside horizontal microfin and smooth tube have
been carried out experimentally The heat transfer coefficients for
annular flow in the smooth tube is shown to agree well with Gungor
and Winterton-s correlation [4]. All the flow patterns occurred in the
test can be divided into three dominant regimes, i.e., stratified-wavy
flow, wavy-annular flow and annular flow. Experimental data are
plotted in two kinds of flow maps, i.e., Weber number for the vapor
versus weber number for the liquid flow map and mass flux versus
vapor quality flow map. The transition from wavy-annular flow to
annular or stratified-wavy flow is identified in the flow maps.
Abstract: Equipment miniaturisation offers several opportunities such as an increased surface-to-volume ratio and higher heat transfer coefficients. However, moving towards small-diameter channels demands extra attention to fouling, reliability and stable operation of the system. The present investigation explores possibilities to enhance the stability of the once-through micro evaporator by reducing its flow boiling induced pressure fluctuations. Experimental comparison shows that the measured reduction factor approaches a theoretically derived value. Pressure fluctuations are reduced by a factor of ten in the solid conical channel and a factor of 15 in the porous conical channel. This presumably leads to less backflow and therefore to a better flow control.
Abstract: Rise/span ratio has been mentioned as one of the
reasons which contribute to the lower buckling load as compared to
the Classical theory buckling load but this ratio has not been quantified
in the equation. The purpose of this study was to determine a more
realistic buckling load by quantifying the effect of the rise/span ratio
because experiments have shown that the Classical theory
overestimates the load. The buckling load equation was derived based
on the theorem of work done and strain energy. Thereafter, finite
element modeling and simulation using ABAQUS was done to
determine the variables that determine the constant in the derived
equation. The rise/span was found to be the determining factor of the
constant in the buckling load equation. The derived buckling load
correlates closely to the load obtained from experiments.
Abstract: Integrated Total Quality Management (TQM) with
Lean Manufacturing (LM) is a system comprises of TQM with LM
principles and is associated with financial and nonfinancial
performance measurement indicators. The ultimate goal of this
system is to focus on achieving total customer satisfaction by
removing eight wastes available in any process in an organization.
A survey questionnaire was developed and distributed to 30 highly
active automotive vendors in Malaysia and analyzed by PASW
Statistics 18. It was found out that these vendors have been
practicing and measuring the effectiveness TQM and LM
implementation. More involvement of all Malaysian automotive
vendors will represent the exact status of current Malaysian
automotive industry in implementing TQM and LM and can
determine whether the industry is ready for integrated TQM and
LM system. This is the first study that combined 4 awards
practices, ISO/TS16949, Toyota Production System and
SAEJ4000.