Abstract: In this paper, the authors present architecture of a multi agent consultation system for obesity related problems, which hybrid the technology of an expert system (ES) and an intelligent agent (IA). The strength of the ES which is capable of pulling the expert knowledge is consulted and presented to the end user via the autonomous and friendly pushing environment of the intelligent agent.
Abstract: Mobile WiMAX is a broadband wireless solution that
enables convergence of mobile and fixed broadband networks
through a common wide area broadband radio access technology and
flexible network architecture. It adopts Orthogonal Frequency
Division Multiple Access (OFDMA) for improved multi-path
performance in Non-Line-Of-Sight (NLOS) environments. Scalable
OFDMA (SOFDMA) is introduced in the IEEE 802e[1]. WIMAX
system uses one of different types of channel coding but The
mandatory channel coding scheme is based on binary nonrecursive
Convolutional Coding (CC). There are other several optional channel
coding schemes such as block turbo codes, convolutional turbo
codes, and low density parity check (LDPC).
In this paper a comparison between the performance of WIMAX
using turbo code and using convolutional product code (CPC) [2] is
made. Also a combination between them had been done. The CPC
gives good results at different SNR values compared to both the
turbo system, and the combination between them. For example, at
BER equal to 10-2 for 128 subcarriers, the amount of improvement
in SNR equals approximately 3 dB higher than turbo code and equals
approximately 2dB higher than the combination respectively. Several
results are obtained at different modulating schemes (16QAM and
64QAM) and different numbers of sub-carriers (128 and 512).
Abstract: In this paper we study the resource allocation problem
for an OFDMA based cooperative two-way relaying (TWR) network.
We focus on amplify and forward (AF) analog network coding
(ANC) protocol. An optimization problem for two basic resources
namely, sub-carrier and power is formulated for multi-user TWR
networks. A joint optimal optimization problem is investigated and
two-step low complexity sub-optimal resource allocation algorithm is
proposed for multi-user TWR networks with ANC protocol. The
proposed algorithm has been evaluated in term of total achievable
system sum-rate and achievable individual sum-rate for each userpair.
The good tradeoff between system sum-rate and fairness is
observed in the two-step proportional resource allocation scheme.
Abstract: Launch and recovery helicopter wind envelope for a
ship type was determined as the first step to the helicopter
qualification program. Flight deck velocities data were obtained by
means of a two components laser Doppler anemometer testing a
1/50th model in the wind tunnel stream. Full-scale flight deck
measurements were obtained on board the ship using a sonic
anemometer. Wind tunnel and full-scale measurements were
compared, showing good agreement and finally, a preliminary launch
and recovery helicopter wind envelope for this specific ship was
built.
Abstract: This research aimed to develop plasma system used in air conditioners. This developed plasma system could be installed in the air conditioners - all split type. The quality of air could be improved to be equal to present plasma system. Development processes were as follows: 1) to study the plasma system used in the air conditioners, 2) to design a plasma generator, 3) to develop the plasma generator, and 4) to test its performance in many types of the air conditioners. This plasma system was developed by AC high voltage – 14 kv with a frequency of 50 kHz. Carbon was a conductor to generate arc in air purifier system. The research was tested by installing the plasma generator in the air conditioners - wall type. Whereas, there were 3 types of installations: air flow out, air flow in, and room center. The result of the plasma generator installed in the air conditioners, split type, revealed that the air flow out installation provided the highest average of o-zone at 223 mg/h. This type of installation provided the highest efficiency of air quality improvement. Moreover, the air flow in installation and the room center installation provided the average of the o-zone at 163 mg/h and 64 mg/h, respectively.
Abstract: This paper provides a replacement policy for warranty products with different failure rate from the consumer-s viewpoint. Assume that the product is replaced once within a finite planning horizon, and the failure rate of the second product is lower than the failure rate of the first product. Within warranty period (WP), the failed product is corrected by minimal repair without any cost to the consumers. After WP, the failed product is repaired with a fixed repair cost to the consumers. However, each failure incurs a fixed downtime cost to the consumers over a finite planning horizon. In this paper, we derive the model of the expected total disbursement cost within a finite planning horizon and some properties of the optimal replacement policy under some reasonable conditions are obtained. Finally, numerical examples are given to illustrate the features of the optimal replacement policy under various maintenance costs.
Abstract: The cost of developing the software from scratch can
be saved by identifying and extracting the reusable components from
already developed and existing software systems or legacy systems
[6]. But the issue of how to identify reusable components from
existing systems has remained relatively unexplored. We have used
metric based approach for characterizing a software module. In this
present work, the metrics McCabe-s Cyclometric Complexity
Measure for Complexity measurement, Regularity Metric, Halstead
Software Science Indicator for Volume indication, Reuse Frequency
metric and Coupling Metric values of the software component are
used as input attributes to the different types of Neural Network
system and reusability of the software component is calculated. The
results are recorded in terms of Accuracy, Mean Absolute Error
(MAE) and Root Mean Squared Error (RMSE).
Abstract: Object-oriented simulation is considered one of the most sophisticated techniques that has been widely used in planning, designing, executing and maintaining construction projects. This technique enables the modeler to focus on objects which is extremely important for thorough understanding of a system. Thus, identifying an object is an essential point of building a successful simulation model. In a maintenance process an object is a maintenance work order (MWO). This study demonstrates a maintenance simulation model for the building maintenance division of Saudi Consolidated Electric Company (SCECO) in Dammam, Saudi Arabia. The model focused on both types of maintenance processes namely: (1) preventive maintenance (PM) and (2) corrective maintenance (CM). It is apparent from the findings that object-oriented simulation is a good diagnostic and experimental tool. This is because problems, limitations, bottlenecks and so forth are easily identified. These features are very difficult to obtain when using other tools.
Abstract: The main purpose of the research is to investigate the computer experiences and computer attitudes of prospective class teachers. The research also investigated the differences between computer attitudes and computer experiences, computer competencies and the influence of genders. Ninety prospective class teachers participated in the research. Computer Attitude Scale- Marmara (CAS-M), and a questionnaire, about their computer experiences, and opinions toward the use of computers in the classroom setting, were administrated. The major findings are as follows: (1) 62% of prospective class teachers have computer at home; (2) 50% of the computer owners have computers less than three years; (3) No significant differences were found between computer attitudes and gender; (4) Differences were found between general computer attitudes and computer liking attitudes of prospective class teachers based on their computer competencies in favor of more competent ones.
Abstract: The work presented in this study is related to an
energy system analysis based on passive cooling system for
dwellings. It consists to solar chimney energy performances
determination versus geometrical and environmental considerations
as the size and inlet width conditions of the chimney. Adrar site
located in the southern region of Algeria is chosen for this study
according to ambient temperature and solar irradiance technical data
availability. Obtained results are related to the glazing temperature
distributions, the chimney air flow and internal wall temperatures.
The air room change per hour (ACH) parameter, the outlet air
velocity and mass air flow rate are also determined. It is shown that
the chimney width has a significant effect on energy performances
compared to its entry size. A good agreement is observed between
these results and those obtained by others from the literature.
Abstract: The Canadian aerospace industry faces many
challenges. One of them is the difficulty in estimating costs. In
particular, the design effort required in a project impacts resource
requirements and lead-time, and consequently the final cost. This
paper presents the findings of a case study conducted for recognized
global leader in the design and manufacturing of aircraft engines. The
study models parametric cost estimation relationships to estimate the
design effort of integrated blade-rotor low-pressure compressor fans.
Several effort drivers are selected to model the relationship.
Comparative analyses of three types of models are conducted. The
model with the best accuracy and significance in design estimation is
retained.
Abstract: Impaired fertility may be the result of indirect
consumption of anti-fertility agents through food. Monosodium
glutamate (MSG) has been widely used as food additive, flavour
enhancer and included in vaccines. This study focuses in determining
the gonadotoxic and cytotoxic effect of MSG on selected sperm
parameters such as sperm viability, sperm membrane integrity and
testes cytoarchitecture of male mice via histological examination to
determine its effect on spermatogenesis. Twenty-four Mus musculus
were randomly divided into 4 groups and given intraperitoneal
injections (IP) daily for 14 days of different MSG concentrations at
250, 500 and 1000mg/kg MSG to body weight to induce obesity.
Saline was given to control group. Mice were sacrificed and analysis
revealed abnormalities in values for sperm parameters and damages
to testes cytoarchitecture of male mice. The results recorded
decreased viability (p0.05) with degenerative structures in seminiferous tubule of
testes. The results indicated various implications of MSG on male
mice reproductive system which has consequences in fertility
potential.
Abstract: In this paper, we studied some properties of geodesic on some open surfaces: Hyperboloid, Paraboloid and Funnel Surface. Geodesic equation in the v-Clairaut parameterization was calculated and reduced to definite integral. Some geodesics on some open surfaces as mention above were classified by Clairaut's relation.
Abstract: The purpose of this study is to analyze the cognitive
and travel experience the situation of the tourist attraction of the sport
tourism in Penghu. This study used a questionnaires, the main island
of Taiwan to Penghu in the way of marine sports tourists adopted the
designated convenience sampling method, a total of 1447 valid
questionnaires. After statistical analysis, this study found that: 1.
Tourists to Penghu sports tourism attraction cognitive as “good air
quality, suitable for water activities". 2. Tourists in Penghu's tourism
experience, “Let me taste the delicious specialties and snacks". 3. The
attraction of the sport tourism, travel experience and perceived value
are correlated, and both the perceived value with a high degree of
predictive ability. Based on the findings of this study not only for
Penghu's tourism industry with the unit in charge of the proposed
operating and suggestions for future research to other researchers.
Abstract: A therapeutic success is the aim of any therapeutic
intervention, but a therapeutic failure is the other side of the same
coin. The purpose of this study is to present the activity of a personal
development group, composed of 14 participants (psychologists,
doctors and a priest) registered for a 2 days course of integrative
psychotherapy. The objectives of this study are centred on: the
management of the personal development group breaking moment
realized by the therapist/trainer; the analysis of the trainer’s personal
situation and of some group participants and the brief presentation of
the main work methods applied on participants in the repairing of the
therapeutic relation and in the counter transfer management. The
therapist’s orientation is an integrative one and the demarche realized
includes T.A. techniques, role play, Gestalt and family systemic
psychotherapy. The conclusions obtained represent landmarks for the
future activity within that group and strengthen the therapeutic
relation with the group.
Abstract: This paper presents a numerical study on surface heat
transfer characteristics of laminar air flows in parallel-plate dimpled
channels. The two-dimensional numerical model is provided by
commercial code FLUENT and the results are obtained for channels
with symmetrically opposing hemi-cylindrical cavities onto both
walls for Reynolds number ranging from 1000 to 2500. The influence
of variations in relative depth of dimples (the ratio of cavity depth to
the cavity curvature diameter), the number of them and the thermophysical
properties of channel walls on heat transfer enhancement is
studied. The results are evident for existence of an optimum value for
the relative depth of dimples in which the largest wall heat flux and
average Nusselt number can be achieved. In addition, the results of
conjugation simulation indicate that the overall influence of the ratio
of wall thermal conductivity to the one of the fluid on heat transfer
rate is not much significant and can be ignored.
Abstract: In this paper, Neuro-Fuzzy based Fuzzy Subtractive
Clustering Method (FSCM) and Self Tuning Fuzzy PD-like
Controller (STFPDC) were used to solve non-linearity and trajectory
problems of pitch AND yaw angles of Twin Rotor MIMO system
(TRMS). The control objective is to make the beams of TRMS reach
a desired position quickly and accurately. The proposed method
could achieve control objectives with simpler controller. To simplify
the complexity of STFPDC, ANFIS based FSCM was used to
simplify the controller and improve the response. The proposed
controllers could achieve satisfactory objectives under different input
signals. Simulation results under MATLAB/Simulink® proved the
improvement of response and superiority of simplified STFPDC on
Fuzzy Logic Controller (FLC).
Abstract: A multiple-option analytical model for the evaluation of the energy performance and distribution of aerodynamic forces acting on a vertical-axis Darrieus wind turbine depending on both rotor architecture and operating conditions is presented. For this purpose, a numerical algorithm, capable of generating the desired rotor conformation depending on design geometric parameters, is coupled to a Single/Double-Disk Multiple-Streamtube Blade Element – Momentum code. Both single and double-disk configurations are analyzed and model predictions are compared to literature experimental data in order to test the capability of the code for predicting rotor performance. Effective airfoil characteristics based on local blade Reynolds number are obtained through interpolation of literature low-Reynolds airfoil databases. Some corrections are introduced inside the original model with the aim of simulating also the effects of blade dynamic stall, rotor streamtube expansion and blade finite aspect ratio, for which a new empirical relationship to better fit the experimental data is proposed. In order to predict also open field rotor operation, a freestream wind shear profile is implemented, reproducing the effect of atmospheric boundary layer.
Abstract: Despite many success stories of manufacturing safety, many organizations are still reluctant, perceiving it as cost increasing and time consuming. The clear contributor may be due to the use of lagging indicators rather than leading indicator measures. The study therefore proposes a combinatorial model for determining the best safety strategy. A combination theory and cost benefit analysis was employed to develop a monetary saving / loss function in terms value of preventions and cost of prevention strategy. Documentations, interviews and structured questionnaire were employed to collect information on Before-And-After safety programme records from a Tobacco company between periods of 1993-2001(for pre-safety) and 2002-2008 (safety period) for the model application. Three combinatorial alternatives A, B, C were obtained resulting into 4, 6 and 4 strategies respectively with PPE and Training being predominant. A total of 728 accidents were recorded for a 9 year period of pre-safety programme and 163 accidents were recorded for 7 years period of safety programme. Six preventions activities (alternative B) yielded the best results. However, all the years of operation experienced except year 2004. The study provides a leading resources for planning successful safety programme
Abstract: The purpose of this study was to determine the
influence of physical activity and dietary fat intake on Body Mass
Index (BMI) of lecturers within a higher learning institutionalized
setting. The study adopted a Cross-sectional Correlational Design
and included 120 lecturers selected proportionately by simple
random sampling techniques from a population of 600 lecturers. Data
was collected using questionnaires, which had sections including
physical activity checklist adopted from the international physical
activity questionnaire (IPAQ), 24-hour food recall, anthropometric
measurements mainly weight and height. Analysis involved the use
of bivariate correlations and linear regression. A significant inverse
association was registered between BMI and duration (in minutes)
spent doing moderate intense physical activity per day (r=-0.322,
p