Abstract: Fishing has always been an essential component of
the Polynesians- life. Fishhooks, mostly in pearl shell, found during
archaeological excavations are the artifacts related to this activity the
most numerous. Thanks to them, we try to reconstruct the ancient
techniques of resources exploitation, inside the lagoons and offshore.
They can also be used as chronological and cultural indicators. The
shapes and dimensions of these artifacts allow comparisons and
classifications used in both functional approach and chrono-cultural
perspective. Hence it is very important for the ethno-archaeologists
to dispose of reliable methods and standardized measurement of
these artifacts. Such a reliable objective and standardized method
have been previously proposed. But this method cannot be envisaged
manually because of the very important time required to measure
each fishhook manually and the quantity of fishhooks to measure
(many hundreds). We propose in this paper a detailed acquisition
protocol of fishhooks and an automation of every step of this method.
We also provide some experimental results obtained on the fishhooks
coming from three archaeological excavations sites.
Abstract: Recently, most digital systems are designed as GALS (Globally Asynchronous Locally Synchronous) systems. Several architectures have been proposed as bus architectures for a GALS system : shared bus, segmented bus, ring bus, and so on. In this study, we propose a ring segmented bus architecture which is a combination of segmented bus and ring bus architecture with the aim of throughput enhancement. In a segmented bus architecture, segments are connected in series. By connecting the segments at the end of the bus and constructing the ring bus, it becomes possible to allocate a channel of the bus bidirectionally. The bus channel is allocated to the shortest path between segments. We consider a metastable operation caused by asynchronous communication between segments and a burst transfer between segments. According to the result of simulation, it is shown that the GALS system designed by the proposed method has the desired operations.
Abstract: FAQ system can make user find answer to the problem that puzzles them. But now the research on Chinese FAQ system is still on the theoretical stage. This paper presents an approach to semantic inference for FAQ mining. To enhance the efficiency, a small pool of the candidate question-answering pairs retrieved from the system for the follow-up work according to the concept of the agriculture domain extracted from user input .Input queries or questions are converted into four parts, the question word segment (QWS), the verb segment (VS), the concept of agricultural areas segment (CS), the auxiliary segment (AS). A semantic matching method is presented to estimate the similarity between the semantic segments of the query and the questions in the pool of the candidate. A thesaurus constructed from the HowNet, a Chinese knowledge base, is adopted for word similarity measure in the matcher. The questions are classified into eleven intension categories using predefined question stemming keywords. For FAQ mining, given a query, the question part and answer part in an FAQ question-answer pair is matched with the input query, respectively. Finally, the probabilities estimated from these two parts are integrated and used to choose the most likely answer for the input query. These approaches are experimented on an agriculture FAQ system. Experimental results indicate that the proposed approach outperformed the FAQ-Finder system in agriculture FAQ retrieval.
Abstract: Microplasma welding is a less expensive alternative to
laser welding in dental technology. The aim of the study was to
highlight discontinuities present in the microplasma welded joints of
dental base metal alloys by visual analysis. Five base metal alloys
designated for fixed prostheses manufacture were selected for the
experiments. Using these plates, preliminary tests were conducted by
microplasma welding in butt joint configuration, without filler
material, bilaterally and with filler material, proper for each base
metal. Macroscopic visual inspection was performed to assess
carefully the irregularities in the welds. Electron microscopy allowed
detection of discontinuities that are not visible to the eye and
revealing details regarding location, trajectory, morphology and size
of discontinuities. Supplementing visual control with microscopic
analysis allows to detect small discontinuities, which escapes the
macroscopic control and to make a detailed study of the weld.
Abstract: In this study, static batch fermentation was used for bacterial cellulose production in date syrup solution (Bx. 10%) at 28°C using Gluconacetobacter. xylinus (PTCC 1734). The physicochemical properties of standard Sigma CMC and the produced carboxymethyl bacterial cellulose (CMBC) were studied using FT-IR spectroscopy, X-ray diffractometry (XRD) and Scanning Electron Microscopy (SEM). According to the FT-IR spectra the bands at 1664 and 1431 cm-1 indicate that carboxylic acid groups and carboxylate groups exist on the surface. The SEM imaging of CMBC and CMC carried out in magnification of 1K. Comparing the SEM imaging obviously showed that the ribbon shape in CMC remained but the length of ribbons became shorter while that shape changed to flake shape for CMBC. Determination of the area under XRD patterns demonstrated that the crystallinity amount of CMC was more than that for CMBC (51.08% and 81.84% for CMBC and CMC, respectively).
Abstract: Autism Spectrum Disorders (ASDs) are characterized
by abnormalities in social interaction and communication, as well as
repetitive and stereotyped behaviors. Although various studies have
been conducted in ASDs etiology across the world, it seems that they
are still unknown in Middle East. Some scientific researches have
been conducted on ASDs in Middle East (ME) especially in
Kingdom of Saudi Arabia (KSA).
A systematic literature review was performed to identify the ASDs
studies in KSA. Accordingly, PubMed, ISI web of Science and
Google were searched to find KSA and ME studies in ASDs. The
main focus of this review work is to outline an improved
understanding of the underpinnings of ASD in order to achieve
therapeutic interventions and we will discuss the main problem we
waiting for solution with reference with role of Transcranial
Magnetic Stimulation (TMS) to modulate cortical activity improve
understanding ASD.
Abstract: Wireless Sensor and Actor Networks (WSANs) constitute an emerging and pervasive technology that is attracting increasing interest in the research community for a wide range of applications. WSANs have two important requirements: coordination interactions and real-time communication to perform correct and timely actions. This paper introduces a methodology to facilitate the task of the application programmer focusing on the coordination and real-time requirements of WSANs. The methodology proposed in this model uses a real-time component model, UM-RTCOM, which will help us to achieve the design and implementation of applications in WSAN by using the component oriented paradigm. This will help us to develop software components which offer some very interesting features, such as reusability and adaptability which are very suitable for WSANs as they are very dynamic environments with rapidly changing conditions. In addition, a high-level coordination model based on tuple channels (TC-WSAN) is integrated into the methodology by providing a component-based specification of this model in UM-RTCOM; this will allow us to satisfy both sensor-actor and actor-actor coordination requirements in WSANs. Finally, we present in this paper the design and implementation of an application which will help us to show how the methodology can be easily used in order to achieve the development of WSANs applications.
Abstract: Although the Vietnamese catfish farming has grown
at very high rates in recent years, the industry has also faced many
problems affecting its sustainability. This paper studies the
perceptions of catfish farmers regarding risk and risk management
strategies in their production activities. Specifically, the study aims
to measure the consequences, likelihoods, and levels of risks as well
as the efficacy of risk management in Vietnamese catfish farming.
Data for the study were collected through a sample of 261 catfish
farmers in the Mekong Delta, Vietnam using a questionnaire survey
in 2008. Results show that, in general, price and production risks
were perceived as the most important risks. Farm management and
technical measures were perceived more effective than other kinds of
risk management strategies in risk reduction. Although price risks
were rated as important risks, price risk management strategies were
not perceived as important measures for risk mitigation. The results
of the study are discussed to provide implications for various
industry stakeholders, including policy makers, processors, advisors,
and developers of new risk management strategies.
Abstract: The overall service performance of I/O intensive
system depends mainly on workload on its storage system. In
heterogeneous storage environment where storage elements from
different vendors with different capacity and performance are put
together, workload should be distributed according to storage
capability. This paper addresses data placement issue in short video
sharing website. Workload contributed by a video is estimated by the
number of views and life time span of existing videos in same
category. Experiment was conducted on 42,000 video titles in six
weeks. Result showed that the proposed algorithm distributed
workload and maintained balance better than round robin and random
algorithms.
Abstract: The novelty proposed in this study is twofold and consists in the developing of a new color similarity metric based on the human visual system and a new color indexing based on a textual approach. The new color similarity metric proposed is based on the color perception of the human visual system. Consequently the results returned by the indexing system can fulfill as much as possibile the user expectations. We developed a web application to collect the users judgments about the similarities between colors, whose results are used to estimate the metric proposed in this study. In order to index the image's colors, we used a text indexing engine to facilitate the integration of visual features in a database of text documents. The textual signature is build by weighting the image's colors in according to their occurrence in the image. The use of a textual indexing engine, provide us a simple, fast and robust solution to index images. A typical usage of the system proposed in this study, is the development of applications whose data type is both visual and textual. In order to evaluate the proposed method we chose a price comparison engine as a case of study, collecting a series of commercial offers containing the textual description and the image representing a specific commercial offer.
Abstract: According to Rostler method (ASTM D 2006), saturates content of bitumen is determined based on its reactivity to sulphuric acid. While Corbett method (ASTM D 4124) based on its polarity level. This paper presents results from the study on the effect of saturates content determined by two different fractionation methods on the rheological and aging characteristics of bitumen. The result indicated that the increment of saturates content tended to reduce all the rheological characteristics concerned. Bitumen became less elastic, less viscous, and less resistant to plastic deformation, but became more resistant to fatigue cracking. After short and long term aging process, the treatment effect coefficients of saturates decreased, saturates became thicker due to aging process. This study concludes that saturates is not really stable or reactive in aging process. Therefore, the reactivity of saturates should be considered in bitumen aging index
Abstract: In this work, new experimental data for slugging
frequency in inclined gas-liquid flow are reported, and a new
correlation is proposed. Scale experiments were carried out using a
mixture of air and water in a 6 m long pipe. Two different pipe
diameters were used, namely, 38 and 67 mm. The data were taken
with capacitance type sensors at a data acquisition frequency of 200
Hz over an interval of 60 seconds. For the range of flow conditions
studied, the liquid superficial velocity is observed to influence the
frequency strongly. A comparison of the present data with
correlations available in the literature reveals a lack of agreement. A
new correlation for slug frequency has been proposed for the inclined
flow, which represents the main contribution of this work.
Abstract: Liners are made to protect the groundwater table from
the infiltration of leachate which normally carries different kinds of
toxic materials from landfills. Although these liners are engineered to
last for long period of time; unfortunately these liners fail; therefore,
toxic materials pass to groundwater. This paper focuses on the
changes of the hydraulic conductivity of a sand-bentonite liner due to
the infiltration of biofuel and ethanol fuel. Series of laboratory tests
were conducted in 20-cm-high PVC columns. Several compositions
of sand-bentonite liners were tested: 95% sand: 5% bentonite; 90%
sand: 10% bentonite; and 100% sand (passed mesh #40). The
columns were subjected to extreme pressures of 40 kPa, and 100 kPa
to evaluate the transport of alternative fuels (biofuel and ethanol
fuel). For comparative studies, similar tests were carried out using
water. Results showed that hydraulic conductivity increased due to
the infiltration of alternative fuels through the liners. Accordingly,
the increase in the hydraulic conductivity showed significant
dependency on the type of liner mixture and the characteristics of the
liquid. The hydraulic conductivity of a liner (subjected to biofuel
infiltration) consisting of 5% bentonite: 95% sand under pressure of
40 kPa and 100 kPa had increased by one fold. In addition, the
hydraulic conductivity of a liner consisting of 10% bentonite: 90%
sand under pressure of 40 kPa and 100 kPa and infiltrated by biofuel
had increased by three folds. On the other hand, the results obtained
by water infiltration under 40 kPa showed lower hydraulic
conductivities of 1.50×10-5 and 1.37×10-9 cm/s for 5% bentonite:
95% sand, and 10% bentonite: 90% sand, respectively. Similarly,
under 100 kPa, the hydraulic conductivities were 2.30×10-5 and
1.90×10-9 cm/s for 5% bentonite: 95% sand, and 10% bentonite: 90%
sand, respectively.
Abstract: Metrics is the process by which numbers or symbols
are assigned to attributes of entities in the real world in such a way as
to describe them according to clearly defined rules. Software metrics
are instruments or ways to measuring all the aspect of software
product. These metrics are used throughout a software project to
assist in estimation, quality control, productivity assessment, and
project control. Object oriented software metrics focus on
measurements that are applied to the class and other characteristics.
These measurements convey the software engineer to the behavior of
the software and how changes can be made that will reduce
complexity and improve the continuing capability of the software.
Object oriented software metric can be classified in two types static
and dynamic. Static metrics are concerned with all the aspects of
measuring by static analysis of software and dynamic metrics are
concerned with all the measuring aspect of the software at run time.
Major work done before, was focusing on static metric. Also some
work has been done in the field of dynamic nature of the software
measurements. But research in this area is demanding for more work.
In this paper we give a set of dynamic metrics specifically for
polymorphism in object oriented system.
Abstract: Language Reforms and potential use of ICTs has been a focal area of Higher Education Commission of Pakistan. Efforts are being accelerated to incorporate fast expanding ICTs to bring qualitative improvement in language instruction in higher education. This paper explores how university teachers are benefitting from ICTs to make their English class effective and what type of problems they face in practicing ICTs during their lectures. An in-depth qualitative study was employed to understand why language teachers tend to use ICTs in their instruction and how they are practicing it. A sample of twenty teachers from five universities located in Islamabad, three from public sector and two from private sector, was selected on non-random (Snowball) sampling basis. An interview with 15 semi-structured items was used as research instruments to collect data. The findings reveal that business English teaching is facilitated and improved through the use of ICTs. The language teachers need special training regarding the practices and implementation of ICTs. It is recommended that initiatives might be taken to equip university language teachers with modern methodology incorporating ICTs as focal area and efforts might be made to remove barriers regarding the training of language teachers and proper usage of ICTs.
Abstract: Severe heart failure is a common problem that has a significant effect on health expenditures in industrialized countries; moreover it reduces patient-s quality of life. However, current research usually focuses either on detailed modeling of the heart or on detailed modeling of the cardiovascular system. Thus, this paper aims to present a sophisticated model of the heart enhanced with an extensive model of the cardiovascular system. Special interest is on the pressure and flow values close to the heart since these values are critical to accurately diagnose causes of heart failure. The model is implemented in Dymola an object-oriented, physical modeling language. Results achieved with the novel model show overall feasibility of the approach. Moreover, results are illustrated and compared to other models. The novel model shows significant improvements.
Abstract: Objective: The objective of this paper is to assess the
hospitals preparedness for emergency using WHO standards.
Method: This is a cross-sectional study, consisted of site visit,
questionnaire survey, 16 health facilities were included. The WHO
standard for emergency preparedness of health facilities was used to
evaluate and assess the hospitals preparedness of health facilities.
Result: 13 hospitals were responded. They scored below average
in all measure >75%), while above average score was in 7 out 9 nine
measure with a range of 8%-25%. Un acceptable below average was
noted in two measures only.
Discussion: The biggest challenge facing the hospitals in their
emergency intervention is the lack of pre-emergency and emergency
preparedness plans as well as the coordination of the hospitals
response mechanisms.
Conclusion: The studied hospitals presently are far from
international disasters preparedness protocols. That necessitates
improvements in emergency preparedness, as well as in physician
skills for injury management.
Abstract: At present, dictionary attack has been the basic tool for
recovering key passwords. In order to avoid dictionary attack, users
purposely choose another character strings as passwords. According to
statistics, about 14% of users choose keys on a keyboard (Kkey, for
short) as passwords. This paper develops a framework system to attack
the password chosen from Kkeys and analyzes its efficiency. Within
this system, we build up keyboard rules using the adjacent and parallel
relationship among Kkeys and then use these Kkey rules to generate
password databases by depth-first search method. According to the
experiment results, we find the key space of databases derived from
these Kkey rules that could be far smaller than the password databases
generated within brute-force attack, thus effectively narrowing down
the scope of attack research. Taking one general Kkey rule, the
combinations in all printable characters (94 types) with Kkey adjacent
and parallel relationship, as an example, the derived key space is about
240 smaller than those in brute-force attack. In addition, we
demonstrate the method's practicality and value by successfully
cracking the access password to UNIX and PC using the password
databases created
Abstract: In this work, position vector of a time-like dual curve
according to standard frame of D31
is investigated. First, it is proven
that position vector of a time-like dual curve satisfies a dual vector
differential equation of fourth order. The general solution of this dual
vector differential equation has not yet been found. Due to this, in
terms of special solutions, position vectors of some special time-like
dual curves with respect to standard frame of D31
are presented.
Abstract: This article demonstrated development of
controlled release system of an NSAID drug, Diclofenac
sodium employing different ratios of Ethyl cellulose.
Diclofenac sodium and ethyl cellulose in different proportions
were processed by microencapsulation based on phase
separation technique to formulate microcapsules. The
prepared microcapsules were then compressed into tablets to
obtain controlled release oral formulations. In-vitro evaluation
was performed by dissolution test of each preparation was
conducted in 900 ml of phosphate buffer solution of pH 7.2
maintained at 37 ± 0.5 °C and stirred at 50 rpm. At predetermined
time intervals (0, 0.5, 1.0, 1.5, 2, 3, 4, 6, 8, 10, 12,
16, 20 and 24 hrs). The drug concentration in the collected
samples was determined by UV spectrophotometer at 276 nm.
The physical characteristics of diclofenac sodium
microcapsules were according to accepted range. These were
off-white, free flowing and spherical in shape. The release
profile of diclofenac sodium from microcapsules was found to
be directly proportional to the proportion of ethylcellulose and
coat thickness. The in-vitro release pattern showed that with
ratio of 1:1 and 1:2 (drug: polymer), the percentage release of
drug at first hour was 16.91 and 11.52 %, respectively as
compared to 1:3 which is only 6.87 % with in this time. The
release mechanism followed higuchi model for its release
pattern. Tablet Formulation (F2) of present study was found
comparable in release profile the marketed brand Phlogin-SR,
microcapsules showed an extended release beyond 24 h.
Further, a good correlation was found between drug release
and proportion of ethylcellulose in the microcapsules.
Microencapsulation based on coacervation found as good
technique to control release of diclofenac sodium for making
the controlled release formulations.