Abstract: This article analyses the relationship between
sovereign credit risk rating and gross domestic product for Central
and Eastern European Countries for the period 1996 – 2010. In order
to study the metioned relationship, we have used a numerical
transformation of the risk qualification, thus: we marked 0 the lowest
risk; then, we went on ascending, with a pace of 5, up to the score of
355 corresponding to the maximum risk. The used method of analysis
is that of econometric modelling with EViews 7.0. programme. This
software allows the analysis of data into a pannel type system,
involving a mix of periods of time and series of data for different
entities. The main conclusion of the work is the one confirming the
negative relationship between the sovereign credit risk and the gross
domestic product for the Central European and Eastern countries
during the reviewed period.
Abstract: The corrugated steel cladding used to cover most of
steel buildings is considered as non-structural element. This research
will reflect the effect of cladding as a shear diaphragm in increasing
the normal elastic capacity of columns. This study is important
because of the lack of information of the behavior of cladding and
secondary members in various codes. Mathematical models for six
different cases are carried by software. The results extracted from the
program have been plotted showing the effects of different variables
on the ultimate load of column. The variables considered in our
research are the spacing between columns and the thickness of the
corrugated sheet representing the sheet stiffness.
Abstract: The current study has investigated the ageing
phenomena of silica optical fibres in relation to water activity which might be accelerated when exposed to a supplementary energy, such as microwaves. A controlled stress by winding fibres onto accurate
diameter mandrel was applied. Taking into account that normally a
decrease in fibre strength is induced in time by chemical action of water, the effects of cumulative reagents such as: water, applied stress and supplementary energy (microwave) in some cases acted in
the opposite manner. The microwave effect as a structural relaxation
catalyst appears unexpected, even if the overall gain in fibre strength is not high, but the stress corrosion factor revealed significant
increase in certain simulation conditions.
Abstract: Hysteresis phenomenon has been observed in the
operations of both horizontal-axis and vertical-axis wind turbines
(HAWTs and VAWTs). In this study, wind tunnel experiments were
applied to investigate the characters of hysteresis phenomena between
the angular speed and the external resistance of electrical loading
during the operation of a Darrieus type VAWT. Data of output voltage,
output current, angular speed of wind turbine under different wind
speeds are measured and analyzed. Results show that the range of
external resistance changes with the wind speed. The range decreases
as the wind speed increases following an exponential decay form.
Experiments also indicate that the maximum output power of wind
turbines is always inside the range where hysteresis happened. These
results provide an important reference to the design of output control
system of wind turbines.
Abstract: Malaria is transmitted to the human by biting of
infected Anopheles mosquitoes. This disease is a serious, acute and
chronic relapsing infection to humans. Fever, nausea, vomiting, back
pain, increased sweating anemia and splenomegaly (enlargement of
the spleen) are the symptoms of the patients who infected with this
disease. It is caused by the multiplication of protozoa parasite of the
genus Plasmodium. Plasmodium falciparum, Plasmodium vivax,
Plasmodium malariae and Plasmodium ovale are the four types of
Plasmodium malaria. A mathematical model for the transmission of
Plasmodium Malaria is developed in which the human and vector
population are divided into two classes, the susceptible and the
infectious classes. In this paper, we formulate the dynamical model
of Plasmodium falciparum and Plasmodium vivax malaria. The
standard dynamical analysis is used for analyzing the behavior for
the transmission of this disease. The Threshold condition is found
and numerical results are shown to confirm the analytical results.
Abstract: The potential of economically cheaper cellulose
containing natural materials like rice husk was assessed for nickel
adsorption from aqueous solutions. The effects of pH, contact time,
sorbent dose, initial metal ion concentration and temperature on the
uptake of nickel were studied in batch process. The removal of nickel
was dependent on the physico-chemical characteristics of the
adsorbent, adsorbate concentration and other studied process
parameters. The sorption data has been correlated with Langmuir,
Freundlich and Dubinin-Radush kevich (D-R) adsorption models. It
was found that Freundlich and Langmuir isotherms fitted well to the
data. Maximum nickel removal was observed at pH 6.0. The
efficiency of rice husk for nickel removal was 51.8% for dilute
solutions at 20 g L-1 adsorbent dose. FTIR, SEM and EDAX were
recorded before and after adsorption to explore the number and
position of the functional groups available for nickel binding on to
the studied adsorbent and changes in surface morphology and
elemental constitution of the adsorbent. Pseudo-second order model
explains the nickel kinetics more effectively. Reusability of the
adsorbent was examined by desorption in which HCl eluted 78.93%
nickel. The results revealed that nickel is considerably adsorbed on
rice husk and it could be and economic method for the removal of
nickel from aqueous solutions.
Abstract: Service identification is one of the main activities in
the modeling of a service-oriented solution, and therefore errors
made during identification can flow down through detailed design
and implementation activities that may necessitate multiple
iterations, especially in building composite applications. Different
strategies exist for how to identify candidate services that each of
them has its own benefits and trade offs. The approach presented in
this paper proposes a selective identification of services approach,
based on in depth business process analysis coupled with use cases
and existing assets analysis and goal service modeling. This article
clearly emphasizes the key activities need for the analysis and
service identification to build a optimized service oriented
architecture. In contrast to other approaches this article mentions
some best practices and steps, wherever appropriate, to point out the
vagueness involved in service identification.
Abstract: The B'enard-Marangoni thermal instability problem for
a viscoelastic Jeffreys- fluid layer with internal heat generation is
investigated. The fluid layer is bounded above by a realistic free
deformable surface and by a plane surface below. Our analysis
shows that while the internal heat generation and the relaxation time
both destabilize the fluid layer, its stability may be enhanced by an
increased retardation time.
Abstract: Presented herein is an assessment of current nonlinear
static procedures (NSPs) for seismic evaluation of bucklingrestrained
braced frames (BRBFs) which have become a favorable
lateral-force resisting system for earthquake resistant buildings. The
bias and accuracy of modal, improved modal pushover analysis
(MPA, IMPA) and mass proportional pushover (MPP) procedures
are comparatively investigated when they are applied to BRBF
buildings subjected to two sets of strong ground motions. The
assessment is based on a comparison of seismic displacement
demands such as target roof displacements, peak floor/roof
displacements and inter-story drifts. The NSP estimates are compared
to 'exact' results from nonlinear response history analysis (NLRHA).
The response statistics presented show that the MPP
procedure tends to significantly overestimate seismic demands of
lower stories of tall buildings considered in this study while MPA
and IMPA procedures provide reasonably accurate results in
estimating maximum inter-story drift over all stories of studied BRBF
systems.
Abstract: In this paper present a sensorless maximum wind power extraction for variable speed constant frequency (VSCF) wind power generation systems with a doubly-fed induction generators (DFIG), to ensure stability and to impose the ideal feedback control solution despite of model uncertainties , using the principles of an active and reactive power controller (DPC) a robust sliding mode power control has been proposed to guarantees fast response times and precise control actions for control the active and reactive power independently. The simulation results in MATLAB/Simulink platform confirmed the good dynamic performance of power control approach for DFIGbased variable speed wind turbines.
Abstract: In a bid to improve turbine entry temperature for maximizing the thermal efficiency of the HP stage gas turbine blade, an attempt is made in this paper to compare the performance of helicoidal ducted blade cooling with turbulator of different geometric proportion. It is found from analysis that there is significant improvement in cooling characteristics for turbine blade with turbulator geometry having larger e/D ratio. Also it is found from analysis, performance is vastly improved for greater thickness of turbulator geometry.
Abstract: An experimental study is realized in order to verify the
Mini Heat Pipe (MHP) concept for cooling high power dissipation
electronic components and determines the potential advantages of
constructing mini channels as an integrated part of a flat heat pipe. A
Flat Mini Heat Pipe (FMHP) prototype including a capillary structure
composed of parallel rectangular microchannels is manufactured and
a filling apparatus is developed in order to charge the FMHP. The
heat transfer improvement obtained by comparing the heat pipe
thermal resistance to the heat conduction thermal resistance of a
copper plate having the same dimensions as the tested FMHP is
demonstrated for different heat input flux rates. Moreover, the heat
transfer in the evaporator and condenser sections are analyzed, and
heat transfer laws are proposed. In the theoretical part of this work, a
detailed mathematical model of a FMHP with axial microchannels is
developed in which the fluid flow is considered along with the heat
and mass transfer processes during evaporation and condensation.
The model is based on the equations for the mass, momentum and
energy conservation, which are written for the evaporator, adiabatic,
and condenser zones. The model, which permits to simulate several
shapes of microchannels, can predict the maximum heat transfer
capacity of FMHP, the optimal fluid mass, and the flow and thermal
parameters along the FMHP. The comparison between experimental
and model results shows the good ability of the numerical model to
predict the axial temperature distribution along the FMHP.
Abstract: The paper describes design of an ontology in the
financial domain for mutual funds. The design of this ontology
consists of four steps, namely, specification, knowledge acquisition,
implementation and semantic query. Specification includes a
description of the taxonomy and different types mutual funds and
their scope. Knowledge acquisition involves the information
extraction from heterogeneous resources. Implementation describes
the conceptualization and encoding of this data. Finally, semantic
query permits complex queries to integrated data, mapping of these
database entities to ontological concepts.
Abstract: Cities denote instantaneously a challenge and an
opportunity for climate change policy. Cities are the place where
most energy services are needed because urbanization is closely
linked to high population densities and concentration of economic
activities and production (Urban energy demand). Consequently, it is
critical to explain about the role of cities within the world-s energy
systems and its correlation with the climate change issue. With more
than half of the world-s population already living in urban areas, and
that percentage expected to rise to 75 per cent by 2050, it is clear that
the path to sustainable development must pass through cities. Cities
expanding in size and population pose increased challenges to the
environment, of which energy is part as a natural resource, and to the
quality of life. Nowadays, most cities have already understood the
importance of sustainability, both at their local scale as in terms of
their contribution to sustainability at higher geographical scales. It
requires the perception of a city as a complex and dynamic
ecosystem, an open system, or cluster of systems, where the energy
as well as the other natural resources is transformed to satisfy the
needs of the different urban activities. In fact, buildings and
transportation generally represent most of cities direct energy
demand, i.e., between 60 per cent and 80 per cent of the overall
consumption. Buildings, both residential and services are usually
influenced by the local physical and social conditions. In terms of
transport, the energy demand is also strongly linked with the specific
characteristics of a city (urban mobility).The concept of a “smart
city" builds on statistics as seven key axes of a city-s success in
moving towards common platform (brain nerve)of sustainable urban
energy systems.
With the aforesaid knowledge, the authors have suggested a frame
work to role of cities, as energy actors for smart city management.
The authors have discusses the potential elements needed for energy
in smart cities and also identified potential energy actions and
relevant barriers. Furthermore, three levels of city smartness in cities
actions to overcome market /institutional failures with a local
approach are distinguished. The authors have made an attempt to
conceive and implement concepts of city smartness by adopting the
city or local government as nerve center through an integrated
planning approach. Finally, concluding with recommendations for
the organization of the Smart Sustainable Cities for positive changes
of urban India.
Abstract: In this paper, a new cooling system using a nacelle duct
is proposed for the mechanical room in the household refrigerator. The
conventional mechanical room consists of a condenser, a compressor
and an axial fan. The axial fan is mainly responsible for cooling the
condenser and the compressor. The new cooling system is developed
by replacing the axial fan with the nacelle duct including the small
centrifugal fan. The parametric study is carried out to find the optimum
designs of the nacelle duct in terms of performance and efficiency.
Through this study, it is revealed that the new system can reduce the
space, electrical power and noise compared with the conventional
system
Abstract: Optical 1x12 fused-taper-twisted polymer optical fiber (POF) couplers has been fabricated by a perform technique. Characterization of the coupler which proposed to be used in passive night vision application to tracking a blind sport area was reported. During the development process of fused-taper-twisted POF couplers was carried out, red LED fully utilized to be injected into the couplers to test the quality of fabricated couplers. Some characterization parameters, such as optical output power, POFs attenuation characteristics and power losses on the network were observed. The maximum output power efficiency of the coupler is about 40%, but it can be improved gradually through experience and practice.
Abstract: Truncated multiplier is a good candidate for digital
signal processing (DSP) applications including finite impulse
response (FIR) and discrete cosine transform (DCT). Through
truncated multiplier a significant reduction in Field Programmable
Gate Array (FPGA) resources can be achieved. This paper presents
for the first time a comparison of resource utilization of Spartan-3AN
and Virtex-5 implementation of standard and truncated multipliers
using Very High Speed Integrated Circuit Hardware Description
Language (VHDL). The Virtex-5 FPGA shows significant
improvement as compared to Spartan-3AN FPGA device. The
Virtex-5 FPGA device shows better performance with a percentage
ratio of number of occupied slices for standard to truncated
multipliers is increased from 40% to 73.86% as compared to Spartan-
3AN is decreased from 68.75% to 58.78%. Results show that the
anomaly in Spartan-3AN FPGA device average connection and
maximum pin delay have been efficiently reduced in Virtex-5 FPGA
device.
Abstract: There are many views on how human decision makers behave. In this work, the Justices of the United States Supreme Court will be viewed in terms of constrained maximization and cognitivecybernetic theory. This paper will integrate research in such fields as law, political science, psychology, economics and decision making theory. It will be argued that due to its heavy workload, the Supreme Court is forced to make decisions in a boundedly rational manner. The ideas and theory put forward here will be tested in the area of the Court’s decisions involving religion. Therefore, the cases involving the U.S. Constitution’s Free Exercise Clause and Establishment Clause will be analyzed. Also, variables such as the U.S. government’s involvement in these cases will be considered. The years to be studied will be 1987-2011.
Abstract: This study offers a new simple method for assessing
an axial part-through crack in a pipe wall. The method utilizes simple
approximate expressions for determining the fracture parameters K,
J, and employs these parameters to determine critical dimensions of a
crack on the basis of equality between the J-integral and the J-based
fracture toughness of the pipe steel. The crack tip constraint is taken
into account by the so-called plastic constraint factor C, by which the
uniaxial yield stress in the J-integral equation is multiplied. The
results of the prediction of the fracture condition are verified by burst
tests on test pipes.
Abstract: An algorithm for learning an overcomplete dictionary
using a Cauchy mixture model for sparse decomposition of an underdetermined
mixing system is introduced. The mixture density
function is derived from a ratio sample of the observed mixture
signals where 1) there are at least two but not necessarily more
mixture signals observed, 2) the source signals are statistically
independent and 3) the sources are sparse. The basis vectors of the
dictionary are learned via the optimization of the location parameters
of the Cauchy mixture components, which is shown to be more
accurate and robust than the conventional data mining methods
usually employed for this task. Using a well known sparse
decomposition algorithm, we extract three speech signals from two
mixtures based on the estimated dictionary. Further tests with
additive Gaussian noise are used to demonstrate the proposed
algorithm-s robustness to outliers.