Abstract: We present a method for the selection of students
in interdisciplinary studies based on the hybrid averaging
operator. We assume that the available information given in
the problem is uncertain so it is necessary to use interval
numbers. Therefore, we suggest a new type of hybrid
aggregation called uncertain induced generalized hybrid
averaging (UIGHA) operator. It is an aggregation operator
that considers the weighted average (WA) and the ordered
weighted averaging (OWA) operator in the same formulation.
Therefore, we are able to consider the degree of optimism of
the decision maker and grades of importance in the same
approach. By using interval numbers, we are able to represent
the information considering the best and worst possible results
so the decision maker gets a more complete view of the
decision problem. We develop an illustrative example of the
proposed scheme in the selection of students in
interdisciplinary studies. We see that with the use of the
UIGHA operator we get a more complete representation of the
selection problem. Then, the decision maker is able to
consider a wide range of alternatives depending on his
interests. We also show other potential applications that could
be used by using the UIGHA operator in educational problems
about selection of different types of resources such as
students, professors, etc.
Abstract: According to the majority and to stereotypes in a simple everyman religious processes in the world in general, and Kazakhstan in particular, have only negative trends. The main reason for the author's opinion is seen in the fact that the media in the pursuit of ratings and sensation, more inclined to highlight the negative aspects of events in the country and the world of processes forgetting or casually mentioning the positive initiatives and achievements. That is why the article is mainly revealed positive trends in mind that the problems of fanaticism, terrorism and the confrontation of society on various issues, a lot has been written and detailed. This article describes the stages in the development of relations between religion and state, as well as institutionalization, networking and assistance in the correct orientation of religious activities in the country.
Abstract: Taking into account that many problems of natural
sciences and engineering are reduced to solving initial-value problem
for ordinary differential equations, beginning from Newton, the
scientists investigate approximate solution of ordinary differential
equations. There are papers of different authors devoted to the
solution of initial value problem for ODE. The Euler-s known
method that was developed under the guidance of the famous
scientists Adams, Runge and Kutta is the most popular one among
these methods.
Recently the scientists began to construct the methods preserving
some properties of Adams and Runge-Kutta methods and called them
hybrid methods. The constructions of such methods are investigated
from the middle of the XX century. Here we investigate one
generalization of multistep and hybrid methods and on their base we
construct specific methods of accuracy order p = 5 and p = 6 for
k = 1 ( k is the order of the difference method).
Abstract: An attempt has been made to investigate the
machinability of zirconia toughened alumina (ZTA) inserts while
turning AISI 4340 steel. The insert was prepared by powder
metallurgy process route and the machining experiments were
performed based on Response Surface Methodology (RSM) design
called Central Composite Design (CCD). The mathematical model of
flank wear, cutting force and surface roughness have been developed
using second order regression analysis. The adequacy of model has
been carried out based on Analysis of variance (ANOVA) techniques.
It can be concluded that cutting speed and feed rate are the two most
influential factor for flank wear and cutting force prediction. For
surface roughness determination, the cutting speed & depth of cut
both have significant contribution. Key parameters effect on each
response has also been presented in graphical contours for choosing
the operating parameter preciously. 83% desirability level has been
achieved using this optimized condition.
Abstract: It is important to remove manganese from water
because of its effects on human and the environment. Human
activities are one of the biggest contributors for excessive manganese
concentration in the environment. The proposed method to remove
manganese in aqueous solution by using adsorption as in carbon
nanotubes (CNT) at different parameters: The parameters are CNT
dosage, pH, agitation speed and contact time. Different pHs are pH
6.0, pH 6.5, pH 7.0, pH 7.5 and pH 8.0, CNT dosages are 5mg,
6.25mg, 7.5mg, 8.75mg or 10mg, contact time are 10 min, 32.5 min,
55 min, 87.5 min and 120 min while the agitation speeds are 100rpm,
150rpm, 200rpm, 250rpm and 300rpm. The parameters chosen for
experiments are based on experimental design done by using Central
Composite Design, Design Expert 6.0 with 4 parameters, 5 levels and
2 replications. Based on the results, condition set at pH 7.0, agitation
speed of 300 rpm, 7.5mg and contact time 55 minutes gives the
highest removal with 75.5%. From ANOVA analysis in Design
Expert 6.0, the residual concentration will be very much affected by
pH and CNT dosage. Initial manganese concentration is 1.2mg/L
while the lowest residual concentration achieved is 0.294mg/L,
which almost satisfy DOE Malaysia Standard B requirement.
Therefore, further experiments must be done to remove manganese
from model water to the required standard (0.2 mg/L) with the initial
concentration set to 0.294 mg/L.
Abstract: Internet addiction has become a critical problem on
adolescents in Taiwan, and its negative effects on various dimensions
of adolescent development caught the attention of educational and
psychological experts. This study examined the correlation between
cognitive (locus of control) and emotion (emotion venting strategies)
factors on internet addiction of adolescents in Taiwan. Using the
Compulsive Internet Use (CIU) and the Emotion Venting Strategy
scales, a survey was conducted and 215 effective samples (students
ranging from12 to14 years old) returned. Quantitative analysis
methods such as descriptive statistics, t-test, ANOVA, Pearson
correlations and multiple regression were adopted. The results were as
follows: 1. Severity of Internet addiction has significant gender
differences; boys were at a higher risk than girls in becoming addicted
to the Internet. 2. Emotion venting, locus of control and internet
addiction have been shown to be positive correlated with one another.
3. Setting the locus of control as the control variable, emotion venting
strategy has positive and significant contribution to internet addiction.
The results of this study suggest that coaching deconstructive emotion
strategies and cognitive believes are encouraged to integrate with
actual field work.
Abstract: The psychological well-being of a family is a subjective matter for evaluation, all the more when it involves the element of religions, whether Islam, Christianity, Buddhism or Hinduism. Each of these religions emphasises similar values and morals on family psychological well-being. This comparative study is specifically to determine the role of religion on family psychological well-being in Pekan district, Pahang, Malaysia. The study adopts a quantitative and qualitative mixed method design and considers a total of 412 samples of parents and children for the quantitative study, and 21 samples for the qualitative study. The quantitative study uses simple random sampling, whereas the qualitative sampling is purposive. The instrument for quantitative study is Ryff’s Psychological Well-being Scale and the qualitative study involves the construction of a guidelines protocol for in-depth interviews of respondents. The quantitative study uses the SPSS version .19 with One Way Anova, and the qualitative analysis is manual based on transcripts with specific codes and themes. The results show nonsignificance, that is, no significant difference among religions in all family psychological well-being constructs in the comparison of Islam, Christianity, Buddhism and Hinduism, thereby accepting a null hypothesis and rejecting an alternative hypothesis. The qualitative study supports the quantitative study, that is, all 21 respondents explain that no difference exists in psychological wellbeing in the comparison of teachings in all the religious mentioned. These implications may be used as guidelines for government and non-government bodies in considering religion as an important element in family psychological well-being in the long run.
Abstract: The purpose of this study was to investigate the effects of computer–based instructional designs, namely modality and redundancy principles on the attitude and learning of music theory among primary pupils of different Music Intelligence levels. The lesson of music theory was developed in three different modes, audio and image (AI), text with image (TI) and audio with image and text (AIT). The independent variables were the three modes of courseware. The moderator variable was music intelligence. The dependent variables were the post test score. ANOVA was used to determine the significant differences of the pretest scores among the three groups. Analyses of covariance (ANCOVA) and Post hoc were carried out to examine the main effects as well as the interaction effects of the independent variables on the dependent variables. High music intelligence pupils performed significantly better than low music intelligence pupils in all the three treatment modes. The AI mode was found to help pupils with low music intelligence significantly more than the TI and AIT modes.
Abstract: The operating control parameters of injection
flushing type of electrical discharge machining process on stainless
steel 304 workpiece with copper tools are being optimized
according to its individual machining characteristic i.e. material
removal rate (MRR). Lower MRR during EDM machining process
may decrease its- machining productivity. Hence, the quality
characteristic for MRR is set to higher-the-better to achieve the
optimum machining productivity. Taguchi method has been used
for the construction, layout and analysis of the experiment for each
of the machining characteristic for the MRR. The use of Taguchi
method in the experiment saves a lot of time and cost of preparing
and machining the experiment samples. Therefore, an L18
Orthogonal array which was the fundamental component in the
statistical design of experiments has been used to plan the
experiments and Analysis of Variance (ANOVA) is used to
determine the optimum machining parameters for this machining
characteristic. The control parameters selected for this
optimization experiments are polarity, pulse on duration, discharge
current, discharge voltage, machining depth, machining diameter
and dielectric liquid pressure. The result had shown that the higher
the discharge voltage, the higher will be the MRR.
Abstract: The study attempted to identify the dominant
intelligences of athletes by comparing the developmental differences
of multiple intelligences between athletes and non-athletes. The
weekly specialized training hours and years of specialized training
was examined to see how it can predict the dominant intelligence with
the age factor controlled. There were 355 participants in the research
(202 athletes and 153 non-athletes). Collected data were analyzed with
one-way MANOVA and multiple hierarchical regression. The results
suggested the dominant intelligences of athletes were Interpersonal
Intelligence, Bodily-Kinesthetic Intelligence, and Intrapersonal
Intelligence. The weekly specialized training hours and years of
specialized training could effectively predict the Interpersonal
Intelligence, Bodily-Kinesthetic Intelligence, and Intrapersonal
Intelligence of athletes. The author suggested the future studies could
focus on the theory construction of weekly specialized training and
years of specialized training. Also, the studies on using “Bridge
strategy" by the athletes to guide disadvantage intelligences with
dominant intelligences are highly valued.
Abstract: Gas Metal Arc Welding (GMAW) processes is an
important joining process widely used in metal fabrication
industries. This paper addresses modeling and optimization of this
technique using a set of experimental data and regression analysis.
The set of experimental data has been used to assess the influence
of GMAW process parameters in weld bead geometry. The
process variables considered here include voltage (V); wire feed
rate (F); torch Angle (A); welding speed (S) and nozzle-to-plate
distance (D). The process output characteristics include weld bead
height, width and penetration. The Taguchi method and regression
modeling are used in order to establish the relationships between
input and output parameters. The adequacy of the model is
evaluated using analysis of variance (ANOVA) technique. In the
next stage, the proposed model is embedded into a Simulated
Annealing (SA) algorithm to optimize the GMAW process
parameters. The objective is to determine a suitable set of process
parameters that can produce desired bead geometry, considering
the ranges of the process parameters. Computational results prove
the effectiveness of the proposed model and optimization
procedure.
Abstract: Wavelength multiplexing (WDM) technology along
with optical amplifiers is used for optical communication systems in
S-band, C-band and L-band. To improve the overall system
performance Hybrid amplifiers consisting of cascaded TDFA and
EDFA with different gain bandwidths are preferred for long haul
wavelength multiplexed optical communication systems. This paper
deals with statistical analysis of different configuration of hybrid
amplifier i.e. analysis of TDFA-EDFA configuration and EDFA –
TDFA configuration. In this paper One-Way ANOVA method is used
for statistical analysis.
Abstract: This paper analyzed the perception of e-commerce
application services by construction material traders in Malaysia.
Five attributes were tested: usability, reputation, trust, privacy and
familiarity. Study methodology consists of survey questionnaire and
statistical analysis that includes reliability analysis, factor analysis,
ANOVA and regression analysis. The respondents were construction
material traders, including hardware stores in Klang Valley, Kuala
Lumpur.
Findings support that usability and familiarity with e-commerce
services in Malaysia have insignificant influence on the acceptance of
e-commerce application. However, reputation, trust and privacy
attributes have significant influence on the choice of e-commerce
acceptance by construction material traders. E-commerce
applications studied included customer database, e-selling, emarketing,
e-payment, e-buying and online advertising. Assumptions
are made that traders have basic knowledge and exposure to ICT
services. i.e. internet service and computers. Study concludes that
reputation, privacy and trust are the three website attributes that
influence the acceptance of e-commerce by construction material
traders.
Abstract: Abrasive waterjet is a novel machining process capable of processing wide range of hard-to-machine materials. This research addresses modeling and optimization of the process parameters for this machining technique. To model the process a set of experimental data has been used to evaluate the effects of various parameter settings in cutting 6063-T6 aluminum alloy. The process variables considered here include nozzle diameter, jet traverse rate, jet pressure and abrasive flow rate. Depth of cut, as one of the most important output characteristics, has been evaluated based on different parameter settings. The Taguchi method and regression modeling are used in order to establish the relationships between input and output parameters. The adequacy of the model is evaluated using analysis of variance (ANOVA) technique. The pairwise effects of process parameters settings on process response outputs are also shown graphically. The proposed model is then embedded into a Simulated Annealing algorithm to optimize the process parameters. The optimization is carried out for any desired values of depth of cut. The objective is to determine proper levels of process parameters in order to obtain a certain level of depth of cut. Computational results demonstrate that the proposed solution procedure is quite effective in solving such multi-variable problems.
Abstract: In the article there have been revealed the properties
of designing the research teaching the military masters and in the context it has been offered the program of mastering by the masters
military men the methodology of research work, in the course of practical teaching activity there has been considered the developed
and approbated model of organization of the process of mastering by the masters the methodology of research work. As a whole, the research direction of master preparation leaves its
sign to the content of education, forms of organization of educational
process, scientific work of masters. In this connection the offered in
the article properties of organization of research teaching and a model
of organization of mastering by the masters military men the methodology of research work can be taken into account when
designing the content of master preparation.
Abstract: Implementation of response surface methodology (RSM) was employed to study the effects of two factor (rubber clearance and round per minute) in brown rice peeling machine of The optimal BROKENS yield (19.02, average of three repeats),.The optimized composition derived from RSM regression was analyzed using Regression analysis and Analysis of Variance (ANOVA). At a significant level α = 0.05, the values of Regression coefficient, R 2 (adj)were 97.35 % and standard deviation were 1.09513. The independent variables are initial rubber clearance, and round per minute parameters namely. The investigating responses are final rubber clearance, and round per minute (RPM). The restriction of the optimization is the designated.
Abstract: The purpose of this research was to study the factors
that influenced the success of mobile phone entrepreneurs at Central
Plaza. The sample group included 187 entrepreneurs at Central Plaza.
A questionnaire was utilized as a tool to collect data. Statistics used
in this research included frequency, percentage, mean, and standard
deviation. Independent- sample t- test, one way ANOVA, and
multiple regression analysis. Data were analyzed by using Statistical
Package for the Social Sciences.The findings disclosed that the
majority of respondents were male between 25-40 years old, and held
an undergraduate degree. The average income of respondents was
between 15,001-25,000 baht. The majority of respondents had less
than 5 years of working experience.
In terms of personality, the findings revealed that expression and
agreement were ranked at the highest level. Whereas, emotion
stability, consciousness, open to new experience were ranked at high.
From the hypotheses testing, the findings revealed that different
genders had different success in their mobile phone business with
different income from the last 6 months. However, difference in age,
income, level of education, and experience affected the success in
terms of income, number of customers, and overall success of
business. Moreover, the factors of personalities included expression,
agreement, emotion stability, consciousness, open to new experience,
and competitive strategy. From the findings, these factors were able
to predict mobile phone business success at 66.9 percent.
Abstract: Severe symptoms, such as dissociation, depersonalization, self-mutilation, suicidal ideations and gestures, are the main reasons for a person to be diagnosed with Borderline Personality Disorder (BPD) and admitted to an inpatient Psychiatric Hospital. However, these symptoms are also indicators of a severe traumatic history as indicated by the extensive research on the topic. Unfortunately patients with such clinical presentation often are treated repeatedly only for their symptomatic behavior, while the main cause for their suffering, the trauma itself, is usually left unaddressed therapeutically. All of the highly structured, replicable, and manualized treatments lack the recognition of the uniqueness of the person and fail to respect his/her rights to experience and react in an idiosyncratic manner. Thus the communicative and adaptive meaning of such symptomatic behavior is missed. Only its pathological side is recognized and subjected to correction and stigmatization, and the message that the person is damaged goods that needs fixing is conveyed once again. However, this time the message would be even more convincing for the victim, because it is sent by mental health providers, who have the credibility to make such a judgment. The result is a revolving door of very expensive hospitalizations for only a temporary and patchy fix. In this way the patients, once victims of abuse and hardship are left invalidated and thus their re-victimization is perpetuated in their search for understanding and help. Keywordsborderline personality disorder (BPD), complex PTSD, integrative treatment of trauma, re-victimization of trauma victims.
Abstract: Education in the modern world provides the socioeconomic
progress of society. In today's society, where the presence
of large middle class ensures its stability and is a symbol of
resolution of hidden economic problems, education is an integral part
of formation and reproduction of the middle class. This article presents part of results of the sociological study conducted under the
project "Kazakhstan model of education: international experience and national traditions" supported by the Foundation of the First President
of Republic of Kazakhstan - Leader of the Nation to determine the
ratio of students to the transformations of the educational system. The
authors conclude that the Kazakhstani system of education, passing
through the transformation processes, improving the quality of
educational programs and trying to correspond to the international
standards, not yet in full range, but begins to perform important
functions in the formation of the middle class.
Abstract: The issue of human anthropology took an important
role in the last epochs and still hasn-t lost its importance. Scientists of
different countries were interested in investigating the appearance of
human being and the idea of life after death. While writing this article
we noticed that scientists who made research in this issue, despite of
the different countries and different epochs in which they lived, had
similarities in their opinions. In given article we wrote great Kazakh
poet AbaiKunanbayev-s philosophical view to the problem of human
anthropology.