Machining Parameters Optimization of Developed Yttria Stabilized Zirconia Toughened Alumina Ceramic Inserts While Machining AISI 4340 Steel

An attempt has been made to investigate the machinability of zirconia toughened alumina (ZTA) inserts while turning AISI 4340 steel. The insert was prepared by powder metallurgy process route and the machining experiments were performed based on Response Surface Methodology (RSM) design called Central Composite Design (CCD). The mathematical model of flank wear, cutting force and surface roughness have been developed using second order regression analysis. The adequacy of model has been carried out based on Analysis of variance (ANOVA) techniques. It can be concluded that cutting speed and feed rate are the two most influential factor for flank wear and cutting force prediction. For surface roughness determination, the cutting speed & depth of cut both have significant contribution. Key parameters effect on each response has also been presented in graphical contours for choosing the operating parameter preciously. 83% desirability level has been achieved using this optimized condition.

Authors:

• Nilrudra Mandal
• B Doloi
• B Mondal

Keywords:

• Analysis of variance (ANOVA)
• Central Composite Design (CCD)
• Response Surface Methodology (RSM)
• Zirconia Toughened Alumina (ZTA).

References:

[1] D. I. Lalwani, N. K. Mehta, and P.K.Jain, "Experimental investigation of
cutting parameters influence on cutting forces and surface roughness in
finish hard turning of MDN 250 steel," J. Mater. Process. Tech, vol. 206,
pp. 167-179, 2008.
[2] P.Thangavel, V.Selladurai, and R.Shanmugam, "Application of response
surface methodology for predicting flank wear in turning operation,"
J.Eng. Manuf, vol.220, no.6, pp.997-1003, 2006
[3] M.Y.Noordin, V.C.Venkatesh, S.Sharif, S.Elting, and A.Abdullah,
"Application of response surface methodology in describing the
performance of coated carbide tools when turning AISI 1045 steel," J.
Mater. Process. Tech, vol.145, pp.46-58, 2004.
[4] V.N.Gaitonde, S.R.Karnik, L.Figueira, and J.P.Davim, "Machinability
investigations in hard turning of AISI D2 cold work tool steel with
conventional and wiper ceramic inserts," Int. J. Refract. Met. Hard.
Mater, vol.27, pp.754-763, 2009.
[5] V.N.Gaitonde, S.R.Karnik, L.Figueira, and J.P.Davim, "Analysis of
machinability during hard turning of cold work tool steel (Type AISI
D2)," J. Mat & Manu Process, vol.24 no.12, pp.1373-1382.
[6] J.P.Davim and L.Figueira, "Comparative evaluation of conventional and
wiper ceramic tools on cutting forces, surface roughness and tool wear
in hard turning AISI D2 steel," J.Eng. Manuf, vol.221, no.4, pp.625-633,
2006
[7] Y. Isik, "Investigating the machinability of tool steels in turning
operations," Mater & Design, vol.28, pp.1417-1424, 2007.
[8] S.K.Sikdar, and M.Chen, "Relationship between tool flank wear area
and component forces in single point turning," J. Mater. Process. Tech,
vol.128, pp.210-215, 2002.
[9] J.G. Lima de, R.F. Avila de, and A.M. Abrao, "Turning of hardened
AISI 4340 steel using coated carbide inserts," J.Eng. Manuf, vol.221,
no.8, pp.1359-1366, 2007.
[10] JVC.Souza, MCA.Nono, M.V. Ribeiro, JPB.Machado, and OMM. Silva,
"Cutting forces in turning of gray cast iron using silicon nitride based
cutting tool," Mater & Design, vol. 30, pp.2715-2720, 2009.
[11] S.Aykut, M.Golcu, S.Semiz, and H.S. Ergur, "Modeling of cutting
forces as function of cutting parameters for face milling of satellite 6
using an artificial neural network," J. Mater. Process. Tech,vol.190,
pp.199-203, 2007.
[12] D.E.Kirby, Z.Zhang, C.J.Chen, and J.Chen, "Optimizing surface finish
in a turning operation using the Taguchi parameter design method," Int.
J. Adv. Manuf. Tech, Vol.30, pp.1021-1029, 2006.
[13] S.T.Lan, and Y.M.Wang, "Competitive parameter optimization of
multiquality CNC turning," Int. J. Adv. Manuf. Tech, Vol.41, pp.820-
826, 2009
[14] A. Hascalik, and U.Caydas, "Optimization of turning parameters for
surface roughness and tool life based on the Taguchi method," Int. J.
Adv. Manuf. Tech, Vol.38, pp.896-903, 2008
[15] M.Nalbant, H. Gokkaya, and G.Sur, "Application of Taguchi method in
the optimization of cutting parameters for surface roughness in turning,"
Mater & Design, vol.28, pp.1379-1385, 2007.
[16] Y.Sahin, "Comparison of tool life between ceramic and cubic boron
nitride (CBN) cutting tools when machining hardened steels," J. Mater.
Process. Tech, vol.209, pp.3478-3489, 2009.
[17] B.Mondal, A.B.Chattopadhya, A.Virkar, and A.Paul, "Development and
performance of Zirconia toughened alumina ceramic tools," Wear,
vol.156, pp.365-383,1992
[18] B.Mondal, "Zirconia toughened alumina for wear resistant engineering
and machinability of steel application," Adv. App. Ceramics, vol.104,
no. 5, pp. 256-260,2005
[19] A.Senthil Kumar, A. Raja Durai, and T. Sornakumar, "Development of
aluminium - ceria ceramic composite cutting tool," Int. J. Refract. Met.
Hard. Mater, vol.22, pp.17-20, 2004.
[20] A.Senthil Kumar, A.Raja Durai, and T.Sornakumar, "Machinability of
hardened steel using alumina based ceramic cutting tools," Int. J.
Refract. Met. Hard. Mater, vol.21, pp.109-117, 2003.
[21] N.Mandal, B.Doloi, and B. Mondal, "Development of flank wear
prediction model of Zirconia Toughened Alumina (ZTA) cutting tool
using response surface methodology," Int. J. Refract. Met. Hard. Mater,
vol.2, pp.273-280, 2011.
[22] N.Mandal, B.Doloi, B.Mondal, and R.Das, "Optimization of flank wear
using Zirconia Toughened Alumina (ZTA) cutting tool: Taguchi method
and Regression analysis," Measurement, Vol. 44, pp. 2149-2155,2011.