Abstract: Preliminary results for a new flat plate test
facility are presented here in the form of Computational Fluid Dynamics (CFD), flow visualisation, pressure measurements and thermal anemometry. The results from the CFD and flow
visualisation show the effectiveness of the plate design, with the trailing edge flap anchoring the stagnation point on the working surface and reducing the extent of the leading edge separation. The flow visualization technique demonstrates the
two-dimensionality of the flow in the location where the
thermal anemometry measurements are obtained.
Measurements of the boundary layer mean velocity profiles compare favourably with the Blasius solution, thereby allowing for comparison of future measurements with the
wealth of data available on zero pressure gradient Blasius
flows. Results for the skin friction, boundary layer thickness,
frictional velocity and wall shear stress are shown to agree well with the Blasius theory, with a maximum experimental deviation from theory of 5%. Two turbulence generating grids
have been designed and characterized and it is shown that the turbulence decay downstream of both grids agrees with established correlations. It is also demonstrated that there is
little dependence of turbulence on the freestream velocity.
Abstract: Quality costs are the costs associated with preventing,
finding, and correcting defective work. Since the main language of
corporate management is money, quality-related costs act as means of
communication between the staff of quality engineering departments
and the company managers. The objective of quality engineering is to
minimize the total quality cost across the life of product. Quality
costs provide a benchmark against which improvement can be
measured over time. It provides a rupee-based report on quality
improvement efforts. It is an effective tool to identify, prioritize and
select quality improvement projects. After reviewing through the
literature it was noticed that a simplified methodology for data
collection of quality cost in a manufacturing industry was required.
The quantified standard methodology is proposed for collecting data
of various elements of quality cost categories for manufacturing
industry. Also in the light of research carried out so far, it is felt
necessary to standardise cost elements in each of the prevention,
appraisal, internal failure and external failure costs. . Here an attempt
is made to standardise the various cost elements applicable to
manufacturing industry and data is collected by using the proposed
quantified methodology. This paper discusses the case study carried
in luggage manufacturing industry.
Abstract: The purpose of this study is to identify and evaluate
the scale of implementation of Just-In-Time (JIT) in the different industrial sectors in the Middle East. This study analyzes the empirical data collected by a questionnaire survey distributed to
companies in three main industrial sectors in the Middle East, which
are: food, chemicals and fabrics. The following main hypotheses is formulated and tested: (The requirements of JIT application differ
according to the type of industrial sector).Descriptive statistics and Box plot analysis were used to examine the hypotheses. This study indicates a reasonable evidence for accepting the main hypotheses. It
reveals that there is no standard way to adopt JIT as a production system. But each industrial sector should concentrate in the
investment on critical requirements that differ according to the nature
and strategy of production followed in that sector.
Abstract: The frequency contents of the non-stationary
signals vary with time. For proper characterization of such
signals, a smart time-frequency representation is necessary.
Classically, the STFT (short-time Fourier transform) is
employed for this purpose. Its limitation is the fixed timefrequency
resolution. To overcome this drawback an enhanced
STFT version is devised. It is based on the signal driven
sampling scheme, which is named as the cross-level sampling.
It can adapt the sampling frequency and the window function
(length plus shape) by following the input signal local
variations. This adaptation results into the proposed technique
appealing features, which are the adaptive time-frequency
resolution and the computational efficiency.
Abstract: The effect of seed inoculation by VA- mycorrhiza and
different levels of phosphorus fertilizer on growth and yield of
sunflower (Azargol cultivar) was studied in experiment farm of
Islamic Azad University, Karaj Branch during 2008 growing season.
The experiment treatments were arranged in factorial based on a
complete randomized block design with three replications. Four
phosphorus fertilizer levels of 25%, 50% 75% and 100% P
recommended with two levels of Mycorrhiza: with and without
Mycorrhiza (control) were assigned in a factorial combination.
Results showed that head diameter, number of seeds in head, seed
yield and oil yield were significantly higher in inoculated plants than
in non-inoculated plants. Head diameter, number of seeds in head,
1000 seeds weight, biological yield, seed yield and oil yield increased
with increasing P level above 75% P recommended in non-inoculated
plants, whereas no significant difference was observed between 75%
and 100% P recommended. The positive effect of mycorrhizal
inoculation decreased with increasing P levels due to decreased
percent root colonization at higher P levels. According to the results
of this experiment, application of mycorrhiza in present of 50% P
recommended had an appropriate performance and could increase
seed yield and oil production to an acceptable level, so it could be
considered as a suitable substitute for chemical phosphorus fertilizer
in organic agricultural systems.
Abstract: This article provides partial evaluation index and its
standard of sports aerobics, including the following 12 indexes: health
vitality, coordination, flexibility, accuracy, pace, endurance, elasticity,
self-confidence, form, control, uniformity and musicality. The
three-layer BP artificial neural network model including input layer,
hidden layer and output layer is established. The result shows that the
model can well reflect the non-linear relationship between the
performance of 12 indexes and the overall performance. The predicted
value of each sample is very close to the true value, with a relative
error fluctuating around of 5%, and the network training is successful.
It shows that BP network has high prediction accuracy and good
generalization capacity if being applied in sports aerobics performance
evaluation after effective training.
Abstract: Understanding the number of people and the flow of
the persons is useful for efficient promotion of the institution
managements and company-s sales improvements. This paper
introduces an automated method for counting passerby using virtualvertical
measurement lines. The process of recognizing a passerby is
carried out using an image sequence obtained from the USB camera.
Space-time image is representing the human regions which are
treated using the segmentation process. To handle the problem of
mismatching, different color space are used to perform the template
matching which chose automatically the best matching to determine
passerby direction and speed. A relation between passerby speed and
the human-pixel area is used to distinguish one or two passersby. In
the experiment, the camera is fixed at the entrance door of the hall in
a side viewing position. Finally, experimental results verify the
effectiveness of the presented method by correctly detecting and
successfully counting them in order to direction with accuracy of
97%.
Abstract: An alternative iterative computational procedure is
proposed for internal normal ball loads calculation in statically
loaded single-row, angular-contact ball bearings, subjected to a
known thrust load, which is applied in the inner ring at the geometric
bearing center line. An accurate method for curvature radii at
contacts with inner and outer raceways in the direction of the motion
is used. Numerical aspects of the iterative procedure are discussed.
Numerical examples results for a 218 angular-contact ball bearing
have been compared with those from the literature. Twenty figures
are presented showing the geometrical features, the behavior of the
convergence variables and the following parameters as functions of
the thrust load: normal ball loads, contact angle, distance between
curvature centers, and normal ball and axial deflections.
Abstract: Measurement and the following evaluation of
performance represent important part of management. The paper
focuses on indicators as the basic elements of performance
measurement system. It emphasizes a necessity of searching
requirements for quality indicators so that they can become part of
the useful system. It introduces standpoints for a systematic dividing
of indicators so that they have as high as possible informative value
of background sources for searching, analysis, designing and using of
indicators. It draws attention to requirements for indicators' quality
and at the same it deals with some dangers decreasing indicator's
informative value. It submits a draft of questions that should be
answered at the construction of indicator. It is obvious that particular
indicators need to be defined exactly to stimulate the desired
behavior in order to attain expected results. In the enclosure a
concrete example of the defined indicator in the concrete conditions
of a small firm is given. The authors of the paper pay attention to the
fact that a quality indicator makes it possible to get to the basic
causes of the problem and include the established facts into the
company information system. At the same time they emphasize that
developing of a quality indicator is a prerequisite for the utilization
of the system of measurement in management.
Abstract: This paper considers the control of the longitudinal
flight dynamics of an F-16 aircraft. The primary design objective
is model-following of the pitch rate q, which is the preferred
system for aircraft approach and landing. Regulation of the aircraft
velocity V (or the Mach-hold autopilot) is also considered, but
as a secondary objective. The problem is challenging because the
system is nonlinear, and also non-affine in the input. A sliding
mode controller is designed for the pitch rate, that exploits the
modal decomposition of the linearized dynamics into its short-period
and phugoid approximations. The inherent robustness of the SMC
design provides a convenient way to design controllers without gain
scheduling, with a steady-state response that is comparable to that
of a conventional polynomial based gain-scheduled approach with
integral control, but with improved transient performance. Integral
action is introduced in the sliding mode design using the recently
developed technique of “conditional integrators", and it is shown that
robust regulation is achieved with asymptotically constant exogenous
signals, without degrading the transient response. Through extensive
simulation on the nonlinear multiple-input multiple-output (MIMO)
longitudinal model of the F-16 aircraft, it is shown that the conditional
integrator design outperforms the one based on the conventional linear
control, without requiring any scheduling.
Abstract: Solar shading designs are important for reduction of building energy consumption and improvement of indoor thermal environment. This paper carried out a number of building simulations for evaluation of the energy performance of different shading devices based on incremental costs. The results show that movable shading devices lower incremental costs by up to 50% compared with fixed ones for the same building energy efficiency for residential buildings, and wing panel shadings are much more suitable in commercial buildings than baring screen ones and overhangs for commercial buildings.
Abstract: The main purpose of this study is to analyze the
feelings of tourists for the service quality of the bikeway. In addition,
this study also analyzed the causal relationship between service
quality and satisfaction to visitor-s lane loyalty. In this study, the Ya
Tam San bikeway visitor-s subjects, using the designated convenience
sampling carried out the survey, a total of 651 questionnaires were
validly. Valid questionnaires after statistical analysis, the following
findings: 1. Visitor-s lane highest quality of service project: the routes
through the region weather pleasant. Lane "with health and sports," the
highest satisfaction various factors of service quality and satisfaction,
loyal between correlations exist. 4. Guided tours of bikeways, the
quality of the environment, and modeling imagery can effectively
predict visitor satisfaction. 5. Quality of bikeway, public facilities,
guided tours, and modeling imagery can effectively predict visitor
loyalty. According to the above results, the study not only makes
recommendations to the government units and the bicycle industry,
also asked the research direction for future researchers.
Abstract: As computer network technology becomes
increasingly complex, it becomes necessary to place greater
requirements on the validity of developing standards and the
resulting technology. Communication networks are based on large
amounts of protocols. The validity of these protocols have to be
proved either individually or in an integral fashion. One strategy for
achieving this is to apply the growing field of formal methods.
Formal methods research defines systems in high order logic so that
automated reasoning can be applied for verification. In this research
we represent and implement a formerly announced multicast protocol
in Prolog language so that certain properties of the protocol can be
verified. It is shown that by using this approach some minor faults in
the protocol were found and repaired. Describing the protocol as
facts and rules also have other benefits i.e. leads to a process-able
knowledge. This knowledge can be transferred as ontology between
systems in KQML format. Since the Prolog language can increase its
knowledge base every time, this method can also be used to learn an
intelligent network.
Abstract: Because support interference corrections are not properly
understood, engineers mostly rely on expensive dummy measurements
or CFD calculations. This paper presents a method based on uncorrected wind tunnel measurements and fast calculation techniques
(it is a hybrid method) to calculate wall interference, support interference and residual interference (when e.g. a support member
closely approaches the wind tunnel walls) for any type of wind tunnel and support configuration. The method provides with a simple formula
for the calculation of the interference gradient. This gradient is
based on the uncorrected measurements and a successive calculation
of the slopes of the interference-free aerodynamic coefficients. For the latter purpose a new vortex-lattice routine is developed that corrects
the slopes for viscous effects. A test case of a measurement on a wing proves the value of this hybrid method as trends and orders of
magnitudes of the interference are correctly determined.
Abstract: In this paper, the two-dimension differential transformation method (DTM) is employed to obtain the closed form solutions of the three famous coupled partial differential equation with physical interest namely, the coupled Korteweg-de Vries(KdV) equations, the coupled Burgers equations and coupled nonlinear Schrödinger equation. We begin by showing that how the differential transformation method applies to a linear and non-linear part of any PDEs and apply on these coupled PDEs to illustrate the sufficiency of the method for this kind of nonlinear differential equations. The results obtained are in good agreement with the exact solution. These results show that the technique introduced here is accurate and easy to apply.
Abstract: Texture classification is an important image processing
task with a broad application range. Many different techniques for
texture classification have been explored. Using sparse approximation
as a feature extraction method for texture classification is a relatively
new approach, and Skretting et al. recently presented the Frame
Texture Classification Method (FTCM), showing very good results on
classical texture images. As an extension of that work the FTCM is
here tested on a real world application as detection of abnormalities
in mammograms. Some extensions to the original FTCM that are
useful in some applications are implemented; two different smoothing
techniques and a vector augmentation technique. Both detection of
microcalcifications (as a primary detection technique and as a last
stage of a detection scheme), and soft tissue lesions in mammograms
are explored. All the results are interesting, and especially the results
using FTCM on regions of interest as the last stage in a detection
scheme for microcalcifications are promising.
Abstract: Inconel 718, a nickel based super-alloy is an
extensively used alloy, accounting for about 50% by weight of
materials used in an aerospace engine, mainly in the gas turbine
compartment. This is owing to their outstanding strength and
oxidation resistance at elevated temperatures in excess of 5500 C.
Machining is a requisite operation in the aircraft industries for the
manufacture of the components especially for gas turbines. This
paper is concerned with optimization of the surface roughness when
turning Inconel 718 with cermet inserts. Optimization of turning
operation is very useful to reduce cost and time for machining. The
approach is based on Response Surface Method (RSM). In this work,
second-order quadratic models are developed for surface roughness,
considering the cutting speed, feed rate and depth of cut as the cutting
parameters, using central composite design. The developed models
are used to determine the optimum machining parameters. These
optimized machining parameters are validated experimentally, and it
is observed that the response values are in reasonable agreement with
the predicted values.
Abstract: This paper describes an enhanced cookie-based
method for counting the visitors of web sites by using a web log
processing system that aims to cope with the ambitious goal of
creating countrywide statistics about the browsing practices of real
human individuals. The focus is put on describing a new more
efficient way of detecting human beings behind web users by placing
different identifiers on the client computers. We briefly introduce our
processing system designed to handle the massive amount of data
records continuously gathered from the most important content
providers of the Hungary. We conclude by showing statistics of
different time spans comparing the efficiency of multiple visitor
counting methods to the one presented here, and some interesting
charts about content providers and web usage based on real data
recorded in 2007 will also be presented.
Abstract: This paper describes a feasibility study that is
included with the research, development and testing of a micro
communications sonobuoy deployable by Maritime Fixed wing
Unmanned Aerial Vehicles (M-UAV) and rotor wing Quad Copters
which are both currently being developed by the University of
Adelaide. The micro communications sonobuoy is developed to act
as a seamless communication relay between an Autonomous
Underwater Vehicle (AUV) and an above water human operator
some distance away. Development of such a device would eliminate
the requirement of physical communication tethers attached to
submersible vehicles for control and data retrieval.
Abstract: Indigenous Knowledge (IK) has many social and
economic benefits. However, IK is at the risk of extinction due to the
difficulties to preserve it as most of the IK largely remains
undocumented. This study aims to design a model of the factors
affecting the adoption of Information and Communication
Technologies (ICTs) for the preservation of IK. The proposed model
is based on theoretical frameworks on ICT adoption. It was designed
following a literature review of ICT adoption theories for households,
and of the factors affecting ICT adoption for IK. The theory that
fitted to the best all factors was then chosen as the basis for the
proposed model. This study found that the Model of Adoption of
Technology in Households (MATH) is the most suitable theoretical
framework for modeling ICT adoption factors for the preservation of
IK.