Abstract: An experimental campaign of measurements for a
Darrieus vertical-axis wind turbine (VAWT) is presented for open
field conditions. The turbine is characterized by a twisted bladed
design, each blade being placed at a fixed distance from the rotational
shaft. The experimental setup to perform the acquisitions is described.
The results are lower than expected, due to the high influence of the
wind shear.
Abstract: This paper deals with the helical flow of a Newtonian
fluid in an infinite circular cylinder, due to both longitudinal and
rotational shear stress. The velocity field and the resulting shear
stress are determined by means of the Laplace and finite Hankel
transforms and satisfy all imposed initial and boundary conditions.
For large times, these solutions reduce to the well-known steady-state
solutions.
Abstract: Wind farms (WFs) with high level of penetration are
being established in power systems worldwide more rapidly than
other renewable resources. The Independent System Operator (ISO),
as a policy maker, should propose appropriate places for WF
installation in order to maximize the benefits for the investors. There
is also a possibility of congestion relief using the new installation of
WFs which should be taken into account by the ISO when proposing
the locations for WF installation. In this context, efficient wind farm
(WF) placement method is proposed in order to reduce burdens on
congested lines. Since the wind speed is a random variable and load
forecasts also contain uncertainties, probabilistic approaches are used
for this type of study. AC probabilistic optimal power flow (P-OPF)
is formulated and solved using Monte Carlo Simulations (MCS). In
order to reduce computation time, point estimate methods (PEM) are
introduced as efficient alternative for time-demanding MCS.
Subsequently, WF optimal placement is determined using generation
shift distribution factors (GSDF) considering a new parameter
entitled, wind availability factor (WAF). In order to obtain more
realistic results, N-1 contingency analysis is employed to find the
optimal size of WF, by means of line outage distribution factors
(LODF). The IEEE 30-bus test system is used to show and compare
the accuracy of proposed methodology.
Abstract: The article is about government programs and projects
and their description which are aimed at improving the socioeconomic
situation in the Republic of Kazakhstan. A brief historical
overview, as well as information about current socio-economic,
political and transitional contexts of the country are provided. Two
theories were described in the article to inform this descriptive study.
According to the United Nation's Development Reports for 2005 and
2011, the country's human development index (HDI) rose by several
points despite the socio-economic and political imbalances taking
place in the republic since it gained its independence in 1991. It is
stated in the article that government support programs are one of the
crucial factors that increase the population welfare which in its turn
may lead to reduction of social crisis processes in the country.
Abstract: The study and development of an innovative material
for building insulation is really important for a sustainable society in order to improve comfort and reducing energy consumption. The aim of this work is the development of insulating panels for
sustainable buildings based on an innovative material made by
cardboard and Phase Change Materials (PCMs).
The research has consisted in laboratory tests whose purpose has been the obtaining of the required properties for insulation panels: lightweight, porous structures and mechanical resistance. PCMs have been used for many years in the building industry as
smart insulation technology because of their properties of storage and release high quantity of latent heat at useful specific temperatures [1]- [2].
The integration of PCMs into cellulose matrix during the waste paper recycling process has been developed in order to obtain a
composite material.
Experiments on the productive process for the realization of insulating panels were done in order to make the new material
suitable for building application. The addition of rising agents
demonstrated the possibility to obtain a lighter structure with better
insulation properties.
Several tests were conducted to verify the new panel properties. The results obtained have shown the possibility to realize an
innovative and sustainable material suitable to replace insulating panels currently used.
Abstract: In this paper, we study the stability of n-dimensional linear fractional neutral differential equation with time delays. By using the Laplace transform, we introduce a characteristic equation for the above system with multiple time delays. We discover that if all roots of the characteristic equation have negative parts, then the equilibrium of the above linear system with fractional order is Lyapunov globally asymptotical stable if the equilibrium exist that is almost the same as that of classical differential equations. An example is provided to show the effectiveness of the approach presented in this paper.
Abstract: A numerical study is presented on convective heat transfer in enclosures. The results are addressed to automotive headlights containing new-age light sources like Light Emitting Diodes (LED). The heat transfer from the heat source (LED) to the enclosure walls is investigated for mixed convection as interaction of the forced convection flow from an inlet and an outlet port and the natural convection at the heat source. Unlike existing studies, inlet and outlet port are thermally coupled and do not serve to remove hot fluid. The input power of the heat source is expressed by the Rayleigh number. The internal position of the heat source, the aspect ratio of the enclosure, and the inclination angle of one wall are varied. The results are given in terms of the global Nusselt number and the enclosure Nusselt number that characterize the heat transfer from the source and from the interior fluid to the enclosure walls, respectively. It is found that the heat transfer from the source to the fluid can be maximized if the source is placed in the main stream from the inlet to the outlet port. In this case, the Reynolds number and heat source position have the major impact on the heat transfer. A disadvantageous position has been found where natural and forced convection compete each other. The overall heat transfer from the source to the wall increases with increasing Reynolds number as well as with increasing aspect ratio and decreasing inclination angle. The heat transfer from the interior fluid to the enclosure wall increases upon decreasing the aspect ratio and increasing the inclination angle. This counteracting behaviour is caused by the variation of the area of the enclosure wall. All mixed convection results are compared to the natural convection limit.
Abstract: Iron ore and coal are the two major important raw
materials being used in Iron making industries. Usually ore fines
containing around 5% Alumina are rejected due to higher proportion
of alumina. Therefore, a technology or process which may reduce
the alumina content by 2% by beneficiation process will be highly
attractive . In addition fine coals with ash content is used nearly 12%
is directly injected in blast furnace. Fast fluidization is a technology
by using dry beneficiation of coal and iron ore can be done. During
the fluidization process the iron ore band coal is fluidized at high
velocity in the riser of a fast fluidized bed, the heavier and coarse
particles is generally settled at the bottom in a dense zone of the riser
while the finer and lighter particle are entrained to the top dilute zone
and then via a cyclone is fed back to the bottom of the riser column.
Most of the alumina and low ash fine size coals being lighter are
expected to move up to the riser and by a natural beneficiation of
ores is expected to take place in the riser. Therefore in this study an
attempt has been made for dry beneficiation of iron ore and coal in a
fluidized bed and its hydrodynamic characterization.
Abstract: In this paper first, Two buildings have been modeled
and then analyzed using nonlinear static analysis method under two
different conditions in Nonlinear SAP 2000 software. In the first
condition the interaction of soil adjacent to the walls of basement are
ignored while in the second case this interaction have been modeled
using Gap elements of nonlinear SAP2000 software. Finally,
comparing the results of two models, the effects of soil-structure on
period, target point displacement, internal forces, shape deformations
and base shears have been studied. According to the results, this
interaction has always increased the base shear of buildings,
decreased the period of structure and target point displacement, and
often decreased the internal forces and displacements.
Abstract: In this paper, supply policy and procurement of
shared resources in some kinds of concurrent construction projects
are investigated. This could be oriented to the problems of holding
construction companies who involve in different projects
concurrently and they have to supply limited resources to several
projects as well as prevent delays to any project. Limits on
transportation vehicles and storage facilities for potential
construction materials and also the available resources (such as cash
or manpower) are some of the examples which affect considerably on
management of all projects over all. The research includes
investigation of some real multi-storey buildings during their
execution periods and surveying the history of the activities. It is
shown that the common resource demand variation curve of the
projects may be expanded or displaced to achieve an optimum
distribution scheme. Of course, it may cause some delay to some
projects, but it has minimum influence on whole execution period of
all projects and its influence on procurement cost of the projects is
considerable. These observations on investigation of some
multistorey building which are built in Iran will be presented in this
paper.
Abstract: In the real application of active control systems to
mitigate the response of structures subjected to sever external
excitations such as earthquake and wind induced vibrations, since the
capacity of actuators is limited then the actuators saturate. Hence, in
designing controllers for linear and nonlinear structures under sever
earthquakes, the actuator saturation should be considered as a
constraint. In this paper optimal design of active controllers for
nonlinear structures by considering the actuator saturation has been
studied. To this end a method has been proposed based on defining
an optimization problem which considers the minimizing of the
maximum displacement of the structure as objective when a limited
capacity for actuator has been used as a constraint in optimization
problem. To evaluate the effectiveness of the proposed method, a
single degree of freedom (SDF) structure with a bilinear hysteretic
behavior has been simulated under a white noise ground acceleration
of different amplitudes. Active tendon control mechanism, comprised
of pre-stressed tendons and an actuator, and extended nonlinear
Newmark method based instantaneous optimal control algorithm
have been used as active control mechanism and algorithm. To
enhance the efficiency of the controllers, the weights corresponding
to displacement, velocity, acceleration and control force in the
performance index have been found by using the Distributed Genetic
Algorithm (DGA). According to the results it has been concluded
that the proposed method has been effective in considering the
actuator saturation in designing optimal controllers for nonlinear
frames. Also it has been shown that the actuator capacity and the
average value of required control force are two important factors in
designing nonlinear controllers for considering the actuator
saturation.
Abstract: Many medical devices are driven by motor pumps. Some researchers reported that the vibration mainly affected medical devices using a motor pump. The purpose of this study was to examine the effect of stiffness and damping coefficient in a 3-dimensional (3D) model of a motor pump and spring. In the present paper, experimental and mathematical tests for the moments of inertia of the 3D model and the material properties were investigated by an INSTRON machine. The response surfaces could be generated by using 3D multi-body analysis and the design of experiment method. It showed that differences in contours of the response surface were clearly found for the particular area. Displacement of the center of the motor pump was decreased at K≈2000 N/M, C≈12.5 N-sec/M. However, the frequency was increased at K≈2000 N/M, C≈15 N-sec/M. In this study, this study suggested experimental technique for vibration reduction for a motor pump in medical device. The combined method suggested in this study will greatly contribute to design of medical devices concerning vibration and noise intervention.
Abstract: To simulate heating systems in buildings, a research oriented computer code has been developed in Sharif University of Technology in Iran where the climate, existing heating equipment in buildings, consumer behavior and their interactions are considered for simulating energy consumption in conventional systems such as heaters, radiators and fan-coils. In order to validate the computer code, the available data of five buildings was used and the computed consumed energy was compared with the estimated energy extracted from monthly bills. The initial heating system was replaced by the alternative system and the effect of this change was observed on the energy consumption. As a result, the effect of changing heating equipment on energy consumption was investigated in different climates. Changing heater to radiator renders energy conservation up to 50% in all climates and changing radiator to fan-coil decreases energy consumption in climates with cold and dry winter.
Abstract: The current study describes a multi-objective optimization technique for positioning of houses in a residential neighborhood. The main task is the placement of residential houses in a favorable configuration satisfying a number of objectives. Solving the house layout problem is a challenging task. It requires an iterative approach to satisfy design requirements (e.g. energy efficiency, skyview, daylight, roads network, visual privacy, and clear access to favorite views). These design requirements vary from one project to another based on location and client preferences. In the Gulf region, the most important socio-cultural factor is the visual privacy in indoor space. Hence, most of the residential houses in this region are surrounded by high fences to provide privacy, which has a direct impact on other requirements (e.g. daylight and direction to favorite views). This investigation introduces a novel technique to optimally locate and orient residential buildings to satisfy a set of design requirements. The developed technique explores the search space for possible solutions. This study considers two dimensional house planning problems. However, it can be extended to solve three dimensional cases.
Abstract: Dielectric sheet perturbation to the dominant TE111
mode resonant frequency of a circular cavity is studied and presented
in this paper. The dielectric sheet, placed at the middle of the airfilled
cavity, introduces discontinuities and disturbs the configuration
of electromagnetic fields in the cavity. For fixed dimensions of cavity
and fixed thickness of the loading dielectric, the dominant resonant
frequency varies quite linearly with the permittivity of the dielectric.
This quasi-linear relationship is plotted using Maple software and
verified using 3D electromagnetic simulations. Two probes are used
in the simulation for wave excitation into and from the cavity. The
best length of probe is found to be 3 mm, giving the closest resonant
frequency to the one calculated using Maple. A total of fourteen
different dielectrics of permittivity ranging from 1 to 12.9 are tested
one by one in the simulation. The works show very close agreement
between the results from Maple and the simulation. A constant
difference of 0.04 GHz is found between the resonant frequencies
collected during simulation and the ones from Maple. The success of
this project may lead to the possibility of using the middle loaded
cavity at TE111 mode as a microwave non-destructive testing of solid
materials.
Abstract: The purpose of this study is to revisit the concept of
rape as represented by professionals in the literature as well as its
perception (beliefs and attitudes) in the population at large and to
propose methodological improvements to its measurement tool. Rape
is a serious crime threatening its victim-s physical and mental health
and integrity; and as such is legally prosecuted in all modern
societies. The problem is not in accepting or rejecting rape as a
criminal act, but rather in the vagueness of its interpretations and
“justifications" maintained in the mentality of modern societies -
known in the literature as the phenomenon of "rape-myth". The rapemyth
can be studied from different perspectives: criminology,
sociology, ethics, medicine and psychology. Its investigation requires
rigorous scientific objectivity, free of passion (victims of rape are at
risk of emotional bias), free of activism (social activists, even if wellintentioned
are also biased), free of any pre-emptive assumptions or
prejudices. To apply a rigorous scientific procedure, we need a solid,
valid and reliable measurement. Rape is a form of heterosexual or
homosexual aggression, violently forcing the victim to give-in in the
sexual activity of the aggressor against her/his will. Human beings
always try to “understand" or find a reason justifying their acts.
Psychological literature provides multiple clinical and experimental
examples of it; just to mention the famous studies by Milgram on the
level of electroshock delivered by the “teacher" towards the “learner"
if “scientifically justifiable" or the studies on the behavior of
“prisoners" and the “guards" and many other experiments and field
observations. Sigmund Freud presented the phenomenon of
unconscious justification and called it rationalization. The multiple
justifications, rationalizations and repeated opinions about sexual
behavior contribute to a myth maintained in the society. What kind of
“rationale" our societies apply to “understand" the non-consensual
sexual behavior? There are many, just to mention few:
• Sex is a ludistic activity for both participants, therefore –
even if not consented – it should bring pleasure to both.
• Everybody wants sex, but only men are allowed to manifest
it openly while women have to pretend the opposite, thus men have
to initiate sexual behavior and women would follow.
• A person who strongly needs sex is free to manifest it and
struggle to get it; the person who doesn-t want it must not reveal
her/his sexual attraction and avoid risky situations; otherwise she/he
is perceived as a promiscuous seducer.
• A person who doesn-t fight against the sexual initiator
unconsciously accepts the rape (does it explain why homosexual
rapes are reported less frequently than rapes against women?).
• Women who are raped deserve it because their wardrobe is
very revealing and seducing and they ''willingly'' go to highly risky
places (alleys, dark roads, etc.).
• Men need to ventilate their sexual energy and if they are
deprived of a partner their urge to have sex is difficult to control.
• Men are supposed to initiate and insist even by force to have
sex (their testosterone makes them both sexual and aggressive).
The paper overviews numerous cultural beliefs about masculine
versus feminine behavior and their impact on the “rape myth".
Abstract: Fatigue tests of specimen-s with numerous holes are
presented. The tests were made up till fatigue cracks have been
created on both sides of the hole. Their extension was stopping with
pressed plastic deformation at the mouth of the detected crack. It is
shown that the moments of occurrence of cracks on holes are
stochastically dependent. This dependence has positive and negative
correlation relations. Shown that the positive correlation is formed
across of the applied force, while negative one – along it. The
negative relationship extends over a greater distance. The
mathematical model of dependence area formation is represented as
well as the estimating of model parameters. The positive correlation
of fatigue cracks origination can be considered as an extension of one
main crack. With negative correlation the first crack locates the place
of its origin, leading to the appearance of multiple cracks; do not
merge with each other.
Abstract: The nonlinear damping behavior is usually ignored in
the design of a miniature moving-coil loudspeaker. But when the
loudspeaker operated in air, the damping parameter varies with the
voice-coil displacement corresponding due to viscous air flow. The
present paper presents an identification model as inverse problem to
identify the nonlinear damping parameter in the lumped parameter
model for the loudspeaker. Theoretical results for the nonlinear
damping are verified by using laser displacement measurement
scanner. These results indicate that the damping parameter has the
greatly different nonlinearity between in air and vacuum. It is believed
that the results of the present work can be applied in diagnosis and
sound quality improvement of a miniature loudspeaker.
Abstract: In this article, we expose our research work in
Human-machine Interaction. The research consists in manipulating
the workspace by eyes. We present some of our results, in particular
the detection of eyes and the mouse actions recognition. Indeed, the
handicaped user becomes able to interact with the machine in a more
intuitive way in diverse applications and contexts. To test our
application we have chooses to work in real time on videos captured
by a camera placed in front of the user.
Abstract: In this work, grinding or microcutting tools in the form of pellets were manufactured using a bounded alumina abrasive grains. The bound used is a vitreous material containing quartz feldspars, kaolinite and a quantity of hematite. The pellets were used in glass grinding process to replace the free abrasive grains lapping process. The study of the elaborated pellets were done to define their effectiveness in the grinding process and to optimize the influence of the pellets elaboration parameters. The obtained results show the existence of an optimal combination of the pellets elaboration parameters for each glass grinding phase (coarse to fine grinding). The final roughness (rms) reached by the elaborated pellets on a BK7 glass surface was about 0.392 μm.