Convective Heat Transfer of Internal Electronic Components in a Headlight Geometry

A numerical study is presented on convective heat transfer in enclosures. The results are addressed to automotive headlights containing new-age light sources like Light Emitting Diodes (LED). The heat transfer from the heat source (LED) to the enclosure walls is investigated for mixed convection as interaction of the forced convection flow from an inlet and an outlet port and the natural convection at the heat source. Unlike existing studies, inlet and outlet port are thermally coupled and do not serve to remove hot fluid. The input power of the heat source is expressed by the Rayleigh number. The internal position of the heat source, the aspect ratio of the enclosure, and the inclination angle of one wall are varied. The results are given in terms of the global Nusselt number and the enclosure Nusselt number that characterize the heat transfer from the source and from the interior fluid to the enclosure walls, respectively. It is found that the heat transfer from the source to the fluid can be maximized if the source is placed in the main stream from the inlet to the outlet port. In this case, the Reynolds number and heat source position have the major impact on the heat transfer. A disadvantageous position has been found where natural and forced convection compete each other. The overall heat transfer from the source to the wall increases with increasing Reynolds number as well as with increasing aspect ratio and decreasing inclination angle. The heat transfer from the interior fluid to the enclosure wall increases upon decreasing the aspect ratio and increasing the inclination angle. This counteracting behaviour is caused by the variation of the area of the enclosure wall. All mixed convection results are compared to the natural convection limit.

Authors:

• Jan Langebach
• Peter Fischer
• Christian Karcher

Keywords:

• Enclosure
• heat source
• heat transfer
• mixed convection.

References:

[1] S. Ostrach, "Natural convection in enclosures", in Advances in heat
transfer, vol. 8, Academic Press, 1972, pp. 161-227.
[2] I. Catton, "Natural convection in enclosures", Proc. 6th Int. Heat
Transfer Conference, vol. 6, pp. 13-31, 1972.
[3] G. S. Barozzi, M. A. Corticelli, "Natural convection in cavities
containing internal sources", Heat Mass Transfer, vol. 36, no. 6, pp.
473-480, 2000.
[4] S. F. Dong, Y. T. Li, "Conjugate of natural convection and conduction
in a complicated enclosure", Heat Mass Transfer, vol. 47, pp. 2233-
2239, 2004.
[5] Y. S. Sun, A. F. Emery, "Effects of wall conduction, internal heat
sources and an internal baffle on natural convection heat transfer in a
rectangular enclosure", Int. J. Heat Mass Transfer, vol. 40, no. 4, pp.
915-929, 1997.
[6] E. Papanicolaou, Y. Jaluria "Mixed convection from a localized heat
source in a cavity with conducting walls: a numerical study", Num. Heat
Transfer A, vol. 23, pp. 463-484, 1993.
[7] E. Papanicolaou, Y. Jaluria, "Mixed convection from simulated
electronic components at varying relative positions in a cavity", J. Heat
Transfer, vol. 116, pp. 960-970, 1994.
[8] E. Papanicolaou, Y. Jaluria, "computation of turbulent flow in mixed
convection in a cavity with a localized heat source", J. Heat Transfer,
vol. 117, pp. 649-658, 1995.
[9] H. Schlichting, K. Gersten, Boundary-Layer Theory, Berlin: Springer,
2000.
[10] B. E. Launder, D. B. Spalding, Lectures in mathematical models of
turbulence, London: Academic Press, 1972.