Abstract: Prior research has examined the relationship between religiosity, religious involvement, and involvement in secular, civic organizations. However, research has not examined the influence of religious involvement on secular, non-civic organizations (i.e. work organizations). This study examines the link between religiosity, religious involvement, and the three-component model of organizational commitment. More specifically, the author hypothesizes that individuals high in religiosity (and religious involvement) will have lower affective, continuance, and normative commitment than less religious (or non-religious) individuals. In addition, it is hypothesized that this relationship is moderated by a third factor: organizational spirituality. Further, the author hypothesizes that for organizations that are spiritual the negative relationship between religiosity and job commitment will be weakened or even negated.
Abstract: Restarted GMRES methods augmented with approximate eigenvectors are widely used for solving large sparse linear systems. Recently a new scheme of augmenting with error approximations is proposed. The main aim of this paper is to develop a restarted GMRES method augmented with the combination of harmonic Ritz vectors and error approximations. We demonstrate that the resulted combination method can gain the advantages of two approaches: (i) effectively deflate the small eigenvalues in magnitude that may hamper the convergence of the method and (ii) partially recover the global optimality lost due to restarting. The effectiveness and efficiency of the new method are demonstrated through various numerical examples.
Abstract: This research attempts to study the feasibility of
augmenting an augmented reality (AR) image card on a Quick
Response (QR) code. The authors have developed a new visual tag,
which contains a QR code and an augmented AR image card. The new
visual tag has features of reading both of the revealed data of the QR
code and the instant data from the AR image card. Furthermore, a
handheld communicating device is used to read and decode the new
visual tag, and then the concealed data of the new visual tag can be
revealed and read through its visual display. In general, the QR code is
designed to store the corresponding data or, as a key, to access the
corresponding data from the server through internet. Those reveled
data from the QR code are represented in text. Normally, the AR
image card is designed to store the corresponding data in
3-Dimensional or animation/video forms. By using QR code's
property of high fault tolerant rate, the new visual tag can access those
two different types of data by using a handheld communicating device.
The new visual tag has an advantage of carrying much more data than
independent QR code or AR image card. The major findings of this
research are: 1) the most efficient area for the designed augmented AR
card augmenting on the QR code is 9% coverage area out of the total
new visual tag-s area, and 2) the best location for the augmented AR
image card augmenting on the QR code is located in the bottom-right
corner of the new visual tag.
Abstract: This paper presents a novel sinusoidal modulation
scheme that features least correlated noise and high linearity. The
modulation circuit, which is composed of a quantizer, a resonator, and
a comparator, is capable of eliminating correlated modulation noise
while doing modulation. The proposed modulation scheme combined
with the linear quadratic optimal control is applied to a single-phase
voltage source inverter and validated with the experiment results. The
experiments show that the inverter supplies stable 60Hz 110V AC
power with a total harmonic distortion of less than 1%, under the DC
input variation from 190 V to 300 V and the output power variation
from 0 to 600 W.
Abstract: Double-diffusive natural convection in an open top
square cavity and heated from the side is studied numerically.
Constant temperatures and concentration are imposed along the right
and left walls while the heat balance at the surface is assumed to obey
Newton-s law of cooling. The finite difference method is used to
solve the dimensionless governing equations. The numerical results
are reported for the effect of Marangoni number, Biot number and
Prandtl number on the contours of streamlines, temperature and
concentration. The predicted results for the average Nusselt number
and Sherwood number are presented for various parametric
conditions. The parameters involved are as follows; the thermal
Marangoni number, 0 ≤ MaT ≤1000 , the solutal Marangoni number,
0 1000 c ≤ Ma ≤ , the Biot number, 0 ≤ Bi ≤ 6 , Grashof number,
5 Gr = 10 and aspect ratio 1. The study focused on both flows; thermal
dominated, N = 0.8 , and compositional dominated, N = 1.3 .
Abstract: Prior research has not effectively investigated how the
profitability of Chinese branches affect FDIs in China [1, 2], so this
study for the first time incorporates realistic earnings information
to systematically investigate effects of innovation, imitation, and
profit factors of FDI diffusions from Taiwan to China. Our nonlinear
least square (NLS) model, which incorporates earnings factors,
forms a nonlinear ordinary differential equation (ODE) in numerical
simulation programs. The model parameters are obtained through
a genetic algorithms (GA) technique and then optimized with the
collected data for the best accuracy. Particularly, Taiwanese regulatory
FDI restrictions are also considered in our modified model to meet
the realistic conditions. To validate the model-s effectiveness, this
investigation compares the prediction accuracy of modified model
with the conventional diffusion model, which does not take account
of the profitability factors.
The results clearly demonstrate the internal influence to be positive,
as early FDI adopters- consistent praises of FDI attract potential firms
to make the same move. The former erects a behavior model for the
latter to imitate their foreign investment decision. Particularly, the
results of modified diffusion models show that the earnings from
Chinese branches are positively related to the internal influence. In
general, the imitating tendency of potential consumers is substantially
hindered by the losses in the Chinese branches, and these firms would
invest less into China. The FDI inflow extension depends on earnings
of Chinese branches, and companies will adjust their FDI strategies
based on the returns. Since this research has proved that earning is
an influential factor on FDI dynamics, our revised model explicitly
performs superior in prediction ability than conventional diffusion
model.
Abstract: The aerodynamics characteristics of a blended-wing body (BWB) aircraft were obtained in Universiti Teknologi MARA low speed wind tunnel. The scaled-down of BWB model consisted of a canard as its horizontal stabilizer. There were four canards with different aspect ratio used in the experiments. Canard setting angles were varied from -20q to 20q. All tests were conducted at velocity of 35 m/s, with Mach number 0.1. At low angles of attacks, the increment of lift slope for various canards aspect ratio is small and almost constant. Higher canard aspect ratio will cause higher drag. However, canard has a high effect to the moment at zero lift, CM,0.The visualization using mini tuff was performed to observe the airflow at the upper surface of canard. KeywordsAerodynamics,blended-wing body, canard, wind tunnel.
Abstract: This analysis investigates the distortion of flow
measurement and the increase of cavitation along orifice
flowmeter. The analysis using the numerical method (CFD)
validated the distortion of flow measurement through the inlet
velocity profile considering the convergence and grid
dependency. Realizable k-e model was selected and y+ was
about 50 in this numerical analysis. This analysis also estimated
the vulnerability of cavitation effect due to inlet velocity profile.
The investigation concludes that inclined inlet velocity profile
could vary the pressure which was measured at pressure tab
near pipe wall and it led to distort the pressure values ranged
from -3.8% to 5.3% near the orifice plate and to make the
increase of cavitation. The investigation recommends that the
fully developed inlet velocity flow is beneficial to accurate flow
measurement in orifice flowmeter.
Abstract: Carbon nanotubes (CNTs) possess unique structural,
mechanical, thermal and electronic properties, and have been
proposed to be used for applications in many fields. However, to
reach the full potential of the CNTs, many problems still need to be
solved, including the development of an easy and effective
purification procedure, since synthesized CNTs contain impurities,
such as amorphous carbon, carbon nanoparticles and metal particles.
Different purification methods yield different CNT characteristics
and may be suitable for the production of different types of CNTs. In
this study, the effect of different purification chemicals on carbon
nanotube quality was investigated. CNTs were firstly synthesized by
chemical vapor deposition (CVD) of acetylene (C2H2) on a
magnesium oxide (MgO) powder impregnated with an iron nitrate
(Fe(NO3)3·9H2O) solution. The synthesis parameters were selected
as: the synthesis temperature of 800°C, the iron content in the
precursor of 5% and the synthesis time of 30 min. The liquid phase
oxidation method was applied for the purification of the synthesized
CNT materials. Three different acid chemicals (HNO3, H2SO4, and
HCl) were used in the removal of the metal catalysts from the
synthesized CNT material to investigate the possible effects of each
acid solution to the purification step. Purification experiments were
carried out at two different temperatures (75 and 120 °C), two
different acid concentrations (3 and 6 M) and for three different time
intervals (6, 8 and 15 h). A 30% H2O2 : 3M HCl (1:1 v%) solution
was also used in the purification step to remove both the metal
catalysts and the amorphous carbon. The purifications using this
solution were performed at the temperature of 75°C for 8 hours.
Purification efficiencies at different conditions were evaluated by
thermogravimetric analysis. Thermal and electrical properties of
CNTs were also determined. It was found that the obtained electrical
conductivity values for the carbon nanotubes were typical for organic
semiconductor materials and thermal stabilities were changed
depending on the purification chemicals.
Abstract: Understanding of how and where NOx formation
occurs in industrial burner is very important for efficient and clean
operation of utility burners. Also the importance of this problem is
mainly due to its relation to the pollutants produced by more burners
used widely of gas turbine in thermal power plants and glass and steel
industry.
In this article, a numerical model of an industrial burner operating
in MILD combustion is validated with experimental data.. Then
influence of air flow rate and air temperature on combustor
temperature profiles and NOX product are investigated. In order to
modification this study reports on the effects of fuel and air dilution
(with inert gases H2O, CO2, N2), and also influence of lean-premixed
of fuel, on the temperature profiles and NOX emission.
Conservation equations of mass, momentum and energy, and
transport equations of species concentrations, turbulence, combustion
and radiation modeling in addition to NO modeling equations were
solved together to present temperature and NO distribution inside the
burner.
The results shows that dilution, cause to a reduction in value of
temperature and NOX emission, and suppresses any flame
propagation inside the furnace and made the flame inside the furnace
invisible. Dilution with H2O rather than N2 and CO2 decreases further
the value of the NOX. Also with raise of lean-premix level, local
temperature of burner and the value of NOX product are decreases
because of premixing prevents local “hot spots" within the combustor
volume that can lead to significant NOx formation. Also leanpremixing
of fuel with air cause to amount of air in reaction zone is
reach more than amount that supplied as is actually needed to burn
the fuel and this act lead to limiting NOx formation
Abstract: Design and evaluation of reciprocating compressors
should include a pulsation study. The object is to ensure that
predicted pulsation levels meet guidelines to limit vibration, shaking
forces, noise, associated pressure drops, horsepower losses and
fabrication cost and time to acceptable levels. This paper explains
procedures and recommendations to select and size pulsation
suppression devices to obtain optimum arrangement in terms of
pulsation, vibration, shaking forces, performance, reliability, safety,
operation, maintenance and commercial conditions. Model and
advanced formulations for pulsation study are presented. The effect
of the full fluid dynamic model on the prediction of pulsation waves
and resulting frequency spectrum distributions are discussed.
Advanced and optimum methods of controlling pulsations are
highlighted. Useful recommendations and guidelines for pulsation
control, piping pulsation analysis, pulsation vessel design, shaking
forces, low pressure drop orifices, pulsation study report and devices
to mitigate pulsation and shaking problems are discussed.
Abstract: Physiological control of a left ventricle assist device (LVAD) is generally a complicated task due to diverse operating environments and patient variability. In this work, a tracking control algorithm based on sliding mode and feed forward control for a class of discrete-time single input single output (SISO) nonlinear uncertain systems is presented. The controller was developed to track the reference trajectory to a set operating point without inducing suction in the ventricle. The controller regulates the estimated mean pulsatile flow Qp and mean pulsatility index of pump rotational speed PIω that was generated from a model of the assist device. We recall the principle of the sliding mode control theory then we combine the feed-forward control design with the sliding mode control technique to follow the reference trajectory. The uncertainty is replaced by its upper and lower boundary. The controller was tested in a computer simulation covering two scenarios (preload and ventricular contractility). The simulation results prove the effectiveness and the robustness of the proposed controller
Abstract: Double-diffusive steady convection in a partially
porous cavity with partially permeable walls and under the combined
buoyancy effects of thermal and mass diffusion was analysed
numerically using finite volume method.
The top wall is well insulated and impermeable while the bottom
surface is partially well insulated and impermeable and partially
submitted to constant temperature T1 and concentration C1. Constant
equal temperature T2 and concentration C2 are imposed along the
vertical surfaces of the enclosure. Mass suction/injection and
injection/suction are respectively considered at the bottom of the
porous centred partition and at one of the vertical walls.
Heat and mass transfer characteristics as streamlines and average
Nusselt numbers and Sherwood numbers were discussed for different
values of buoyancy ratio, Rayleigh number, and injection/suction
coefficient.
It is especially noted that increasing the injection factor
disadvantages the exchanges in the case of the injection while the
transfer is augmented in case of suction. On the other hand, a critical
value of the buoyancy ratio was highlighted for which heat and mass
transfers are minimized.
Abstract: A new numerical method for solving the twodimensional,
steady, incompressible, viscous flow equations on a
Curvilinear staggered grid is presented in this paper. The proposed
methodology is finite difference based, but essentially takes
advantage of the best features of two well-established numerical
formulations, the finite difference and finite volume methods. Some
weaknesses of the finite difference approach are removed by
exploiting the strengths of the finite volume method. In particular,
the issue of velocity-pressure coupling is dealt with in the proposed
finite difference formulation by developing a pressure correction
equation in a manner similar to the SIMPLE approach commonly
used in finite volume formulations. However, since this is purely a
finite difference formulation, numerical approximation of fluxes is
not required. Results obtained from the present method are based on
the first-order upwind scheme for the convective terms, but the
methodology can easily be modified to accommodate higher order
differencing schemes.
Abstract: In order to study floristic and molecular classification
of common wild wheat (Triticum boeoticum Boiss.), an analysis was
conducted on populations of the Triticum boeoticum collected from
different regions of Iran. Considering all floristic compositions of
habitats, six floristic groups (syntaxa) within the populations were
identified. A high level of variation of T. boeoticum also detected
using SSR markers. Our results showed that molecular method
confirmed the grouping of floristic method. In other word, the results
from our study indicate that floristic classification are still useful,
efficient, and economic tools for characterizing the amount and
distribution of genetic variation in natural populations of T.
boeoticum. Nevertheless, molecular markers appear as useful and
complementary techniques for identification and for evaluation of
genetic diversity in studied populations.
Abstract: This paper describes an ongoing study into the quality of service provided by the Irish Revenue Commisioners- online tax filing and collection system. The Irish Revenue On-Line Service (ROS) site has won several awards. In this study, a version of the widely use SERVQUAL measuring instrument, adapted for use with online services, has been modified for the specific case of ROS. In this paper, the theory behind this instrument is set out, the particular problems of evaluating revenue collecting online are examined and the rationale for this approach is explained.
Abstract: In this paper we present a novel technique for data
hiding in binary document images. We use the concept of entropy in
order to identify document specific least distortive areas throughout
the binary document image. The document image is treated as any
other image and the proposed method utilizes the standard document
characteristics for the embedding process. Proposed method
minimizes perceptual distortion due to embedding and allows
watermark extraction without the requirement of any side information
at the decoder end.
Abstract: A model of a system concerning one species of demersal
(inshore) fish and one of pelagic (offshore) fish undergoing fishing
restricted by marine protected areas is proposed in this paper. This
setup was based on the FISH-BE model applied to the Tabina fishery
in Zamboanga del Sur, Philippines. The components of the model
equations have been adapted from widely-accepted mechanisms in
population dynamics. The model employs Gompertz-s law of growth
and interaction on each type of protected and unprotected subpopulation.
Exchange coefficients between protected and unprotected
areas were assumed to be proportional to the relative area of the
entry region. Fishing harvests were assumed to be proportional to
both the number of fishers and the number of unprotected fish. An
extra term was included for the pelagic population to allow for the
exchange between the unprotected area and the outside environment.
The systems were found to be bounded for all parameter values. The
equations for the steady state were unsolvable analytically but the
existence and uniqueness of non-zero steady states can be proven.
Plots also show that an MPA size yielding the maximum steady state
of the unprotected population can be found. All steady states were
found to be globally asymptotically stable for the entire range of
parameter values.
Abstract: In this paper, parallel interface for microprocessor
trainer was implemented. A programmable parallel–port device such
as the IC 8255A is initialized for simple input or output and for
handshake input or output by choosing kinds of modes. The hardware
connections and the programs can be used to interface
microprocessor trainer and a personal computer by using IC 8255A.
The assembly programs edited on PC-s editor can be downloaded to
the trainer.
Abstract: The problem discussed in this paper involves packing fresh fish fileet of the northern Cod into a standard square container. The fish is first cleaned and split and then collected on a belt ready to be stacked in a container. The aim of our work is to pack the fish into the container with constraints on the amount of overlap allowed for the fileets. The current focus is to design a packing cell that can be real-time and of practical use, while finding the optimal solution to the degree of overlap and minimise the unused space of the container.