Abstract: The importance of happiness understanding research is caused by cardinal changes experiences in system of people values in the post-Soviet countries territory. «The time of changes», which characterized with destruction of old values and not creativeness of new, stimulating experiences by the person of existential vacuum. The given research is actual not only in connection with sense formation, but also in connection with necessity creatively to adapt in integrative space. According to numerous works [1,2,3], we define happiness as the peak experience connected with satisfaction correlated system of needs, dependent on style of subject's coping behavior.
Abstract: The development of Web has affected different aspects of our lives, such as communication, sharing knowledge, searching for jobs, social activities, etc. The web portal as a gateway in the World Wide Web is a starting point for people who are connecting to the Internet. The web portal as the type of knowledge management system provides a rich space to share and search information as well as communication services like free email or content provision for the users. This research aims to discover the university needs to the web portal as a necessary tool for students in the universities to help them in getting the required information. A survey was conducted to gather students' requirements which can be incorporated in to portal to be developed.
Abstract: Clinically, chickens showed progressively developed
clinical signs represented by sever cyanosis of the comb and wattles
with hemorrhage at the shanks, depression, and ruffling feathers with
loss of appetite and high daily mortalities. The ducks showed severe
neurological signs as torticollus, seizures and inability to stand with
mild signs of diarrhea and depression. Grossly, chickens showed
hemorrhages and congestion in most of the organs particularly lung,
liver, spleen, trachea and kidney. The examined ducks showed
multiple petechial hemorrhages, multifocal hemorrhagic necrosis in
the pancreas, pulmonary edema, congestion and hemorrhage in
meninges and congestion in the skeletal muscles. Histopathology
revealed severe congestion and hemorrhages in most of the organs
particularly lung, liver and kidney. Microscopic erosive tracheitis,
sever pulmonary congestion and perivascular oedema and lymphogranulocytic
pneumonia were constant. The liver showed hepatocyts
necrosis and lympho-granulocytic infiltration. The kidney showed
renal tubular necrosis and diffuse congestion. Multifocal, neuronal
necrosis, hemorrhages, multifocal glial nodules, lympho- histiocytic
perivascular cuffing, and occasional neuronophagia were observed in
the cerebrum. Other organs showed moderate changes.
Abstract: The effects of chitosan, a biodegradable polymer,
were studied in Grammatophyllum speciosum protocorm-like bodies
(PLBs) in vitro culture. The chitosan concentration of 0, 5, 10, 15,
20, 25, 50 or 100 mg/l were supplemented in half-strength Murashige
and Skoog (1/2 MS) liquid or on agar media containing 2% (w/v)
sucrose. The results showed that liquid medium supplemented with
15 mg/l chitosan showed the highest relative growth rate (7-fold
increase) of PLBs. On 1/2 MS agar medium supplemented with 25
mg/l chitosan gave the highest relative growth rate (4-fold increase).
The relative growth rate of G. speciosum PLBs on agar medium was
significantly lower than that in liquid medium. Moreover, chitosan,
supplemented to agar medium promoted shoot formation but not
rooting. However, supplementation at too high a level, such as 100
mg/l can inhibit growth and kill PLBs.
Abstract: This research proposes an algorithm for the simulation
of time-periodic unsteady problems via the solution unsteady Euler
and Navier-Stokes equations. This algorithm which is called Time
Spectral method uses a Fourier representation in time and hence
solve for the periodic state directly without resolving transients
(which consume most of the resources in a time-accurate scheme).
Mathematical tools used here are discrete Fourier transformations. It
has shown tremendous potential for reducing the computational cost
compared to conventional time-accurate methods, by enforcing
periodicity and using Fourier representation in time, leading to
spectral accuracy. The accuracy and efficiency of this technique is
verified by Euler and Navier-Stokes calculations for pitching airfoils.
Because of flow turbulence nature, Baldwin-Lomax turbulence
model has been used at viscous flow analysis. The results presented
by the Time Spectral method are compared with experimental data. It
has shown tremendous potential for reducing the computational cost
compared to the conventional time-accurate methods, by enforcing
periodicity and using Fourier representation in time, leading to
spectral accuracy, because results verify the small number of time
intervals per pitching cycle required to capture the flow physics.
Abstract: Transportation is one of the main activities related to
creating value for the tourists. Transport management in tourism
mainly focuses on managing transfer points and vehicle capacity.
However, transport service level must also be ensured as it now
relates to tourist-s experiences. This paper emphasizes on the
responsiveness as one of key service performance measures. An
evaluation framework is developed and illustarted by using the case
of small bus service in Pattaya city. It can be seen as a great potential
for the city to utilize the small bus transportation in order to meet the
needs of more diverse group of passengers and to support the
expansion of tourist areas. The framework integrates with service
operations management, logistics, and tourism behavior perspectives.
The findings from the investigation of existing small bus service are
presented and preliminarily validate the usability of the framework.
Abstract: In this article we explore the application of a formal
proof system to verification problems in cryptography. Cryptographic
properties concerning correctness or security of some cryptographic
algorithms are of great interest. Beside some basic lemmata, we
explore an implementation of a complex function that is used in
cryptography. More precisely, we describe formal properties of this
implementation that we computer prove. We describe formalized
probability distributions (σ-algebras, probability spaces and conditional
probabilities). These are given in the formal language of the
formal proof system Isabelle/HOL. Moreover, we computer prove
Bayes- Formula. Besides, we describe an application of the presented
formalized probability distributions to cryptography. Furthermore,
this article shows that computer proofs of complex cryptographic
functions are possible by presenting an implementation of the Miller-
Rabin primality test that admits formal verification. Our achievements
are a step towards computer verification of cryptographic primitives.
They describe a basis for computer verification in cryptography.
Computer verification can be applied to further problems in cryptographic
research, if the corresponding basic mathematical knowledge
is available in a database.
Abstract: In this study, the locations and areas of commercial
accumulations were detected by using digital yellow page data. An
original buffering method that can accurately create polygons of
commercial accumulations is proposed in this paper.; by using this
method, distribution of commercial accumulations can be easily
created and monitored over a wide area. The locations, areas, and
time-series changes of commercial accumulations in the South Kanto
region can be monitored by integrating polygons of commercial
accumulations with the time-series data of digital yellow page data.
The circumstances of commercial accumulations were shown to vary
according to areas, that is, highly- urbanized regions such as the city
center of Tokyo and prefectural capitals, suburban areas near large
cities, and suburban and rural areas.
Abstract: This paper reports the fatigue crack growth behaviour
of gas tungsten arc, electron beam and laser beam welded Ti-6Al-4V
titanium alloy. Centre cracked tensile specimens were prepared to
evaluate the fatigue crack growth behaviour. A 100kN servo
hydraulic controlled fatigue testing machine was used under constant
amplitude uniaxial tensile load (stress ratio of 0.1 and frequency of
10 Hz). Crack growth curves were plotted and crack growth
parameters (exponent and intercept) were evaluated. Critical and
threshold stress intensity factor ranges were also evaluated. Fatigue
crack growth behaviour of welds was correlated with mechanical
properties and microstructural characteristics of welds. Of the three
joints, the joint fabricated by laser beam welding exhibited higher
fatigue crack growth resistance due to the presence of fine lamellar
microstructure in the weld metal.
Abstract: Land degradation is of concern in many countries. People more and more must address the problems associated with the degradation of soil properties due to man. Increasingly, organic soil amendments, such as compost are being examined for their potential use in soil restoration and for preventing soil erosion. In the Czech Republic, compost is the most used to improve soil structure and increase the content of soil organic matter. Land reclamation / restoration is one of the ways to evaluate industrially produced compost because Czech farmers are not willing to use compost as organic fertilizer. The most common use of reclamation substrates in the Czech Republic is for the rehabilitation of landfills and contaminated sites.
This paper deals with the influence of reclamation substrates (RS) with different proportions of compost and sand on selected soil properties–chemical characteristics, nitrogen bioavailability, leaching of mineral nitrogen, respiration activity and plant biomass production. Chemical properties vary proportionally with addition of compost and sand to the control variant (topsoil). The highest differences between the variants were recorded in leaching of mineral nitrogen (varies from 1.36mg dm-3 in C to 9.09mg dm-3). Addition of compost to soil improves conditions for plant growth in comparison with soil alone. However, too high addition of compost may have adverse effects on plant growth. In addition, high proportion of compost increases leaching of mineral N. Therefore, mixture of 70% of soil with 10% of compost and 20% of sand may be recommended as optimal composition of RS.
Abstract: This paper present the implementation of a new ordering strategy on Successive Overrelaxation scheme on two dimensional boundary value problems. The strategy involve two directions alternatingly; from top and bottom of the solution domain. The method shows to significantly reduce the iteration number to converge. Four numerical experiments were carried out to examine the performance of the new strategy.
Abstract: Recently, information security has become a key issue
in information technology as the number of computer security
breaches are exposed to an increasing number of security threats. A
variety of intrusion detection systems (IDS) have been employed for
protecting computers and networks from malicious network-based or
host-based attacks by using traditional statistical methods to new data
mining approaches in last decades. However, today's commercially
available intrusion detection systems are signature-based that are not
capable of detecting unknown attacks. In this paper, we present a
new learning algorithm for anomaly based network intrusion
detection system using decision tree algorithm that distinguishes
attacks from normal behaviors and identifies different types of
intrusions. Experimental results on the KDD99 benchmark network
intrusion detection dataset demonstrate that the proposed learning
algorithm achieved 98% detection rate (DR) in comparison with
other existing methods.
Abstract: This study aims to identify the current situation and
problems of environmental statement for major four home appliances
(refrigerators, washing machines, air conditioners and television
receivers) sold at online stores in Japan, and then to suggest how to
improve the situation, through a questionnaire survey conducted
among businesses that operate online stores and online malls with
multiple online stores. Results of the study boil down to:
(1) It is found out that environmental statement for the home
appliances at online stores have four problems; (i) less information
on “three Rs" and “chemical substances" than the one on “energy
conservation", (ii) cost for providing environmental statement, (iii)
issues associated with a label and mark placement, and (iv) issues
associated with energy conservation statement.
(2) Improvements are suggested for each of the four problems listed
above, and shown are (i) the effectiveness of, and need to promote, a
label and mark placement, (ii) cost burden on buyers, and (iii) need
of active efforts made by businesses and of dissemination of legal
regulations to businesses.
Abstract: This paper presents an algebraic approach to optimize
queries in domain-specific database management system
for protein structure data. The approach involves the introduction of
several protein structure specific algebraic operators to query the
complex data stored in an object-oriented database system. The
Protein Algebra provides an extensible set of high-level Genomic
Data Types and Protein Data Types along with a comprehensive
collection of appropriate genomic and protein functions. The paper
also presents a query translator that converts high-level query
specifications in algebra into low-level query specifications in
Protein-QL, a query language designed to query protein structure
data. The query transformation process uses a Protein Ontology that
serves the purpose of a dictionary.
Abstract: Transmission network expansion planning (TNEP) is
a basic part of power system planning that determines where, when
and how many new transmission lines should be added to the
network. Up till now, various methods have been presented to solve
the static transmission network expansion planning (STNEP)
problem. But in all of these methods, transmission expansion
planning considering network adequacy restriction has not been
investigated. Thus, in this paper, STNEP problem is being studied
considering network adequacy restriction using discrete particle
swarm optimization (DPSO) algorithm. The goal of this paper is
obtaining a configuration for network expansion with lowest
expansion cost and a specific adequacy. The proposed idea has been
tested on the Garvers network and compared with the decimal
codification genetic algorithm (DCGA). The results show that the
network will possess maximum efficiency economically. Also, it is
shown that precision and convergence speed of the proposed DPSO
based method for the solution of the STNEP problem is more than
DCGA approach.
Abstract: In this paper we proposed multistage adaptive
ARQ/HARQ/HARQ scheme. This method combines pure ARQ
(Automatic Repeat reQuest) mode in low channel bit error rate and
hybrid ARQ method using two different Reed-Solomon codes in
middle and high error rate conditions. It follows, that our scheme has
three stages. The main goal is to increase number of states in adaptive
HARQ methods and be able to achieve maximum throughput for
every channel bit error rate. We will prove the proposal by
calculation and then with simulations in land mobile satellite channel
environment. Optimization of scheme system parameters is described
in order to maximize the throughput in the whole defined Signal-to-
Noise Ratio (SNR) range in selected channel environment.
Abstract: This paper study the segmented split capacitor
Digital-to-Analog Converter (DAC) implemented in a differentialtype
12-bit Successive Approximation Analog-to-Digital Converter
(SA-ADC). The series capacitance split array method employed as it
reduced the total area of the capacitors required for high resolution
DACs. A 12-bit regular binary array structure requires 2049 unit
capacitors (Cs) while the split array needs 127 unit Cs. These results
in the reduction of the total capacitance and power consumption of
the series split array architectures as to regular binary-weighted
structures. The paper will show the 12-bit DAC series split capacitor
with 4-bit thermometer coded DAC architectures as well as the
simulation and measured results.
Abstract: The Combination of path planning and path following is the main purpose of this paper. This paper describes the developed practical approach to motion control of the MRL small size robots. An intelligent controller is applied to control omni-directional robots motion in simulation and real environment respectively. The Brain Emotional Learning Based Intelligent Controller (BELBIC), based on LQR control is adopted for the omni-directional robots. The contribution of BELBIC in improving the control system performance is shown as application of the emotional learning in a real world problem. Optimizing of the control effort can be achieved in this method too. Next the implicit communication method is used to determine the high level strategies and coordination of the robots. Some simple rules besides using the environment as a memory to improve the coordination between agents make the robots' decision making system. With this simple algorithm our team manifests a desirable cooperation.
Abstract: The aim of this study was to investigate the
effectiveness of anaerobic digestion for the treatment of wool
scouring wastes. The experiments design comprised three ratios of
waste (W) to seed(S) (W:S) of 25:75, 50:50 and 75:25, corresponding
to 1.9. 1.7 and 1.5g tCOD/g TS, respectively, with or without
chemicals addition. NH4Cl was added to the reactors as a source for
nitrogen to achieve C:N:P of 420:14:3. A cationic flocculent was
added at 0.5 and 0.75% to enhance flocculation of sludge. The results
showed that the reactors that received W:S at a ratio of 25:75
produced the largest volume of biogas. The final soluble COD
(sCOD) was below the limits for discharge to the sewer system.
Abstract: Bendability is constrained by maximum top roller
load imparting capacity of the machine. Maximum load is
encountered during the edge pre-bending stage of roller bending.
Capacity of 3-roller plate bending machine is specified by
maximum thickness and minimum shell diameter combinations that
can be pre-bend for given plate material of maximum width.
Commercially available plate width or width of the plate that can be
accommodated on machine decides the maximum rolling width.
Original equipment manufacturers (OEM) provide the machine
capacity chart based on reference material considering perfectly
plastic material model. Reported work shows the bendability analysis
of heavy duty 3-roller plate bending machine. The input variables for
the industry are plate thickness, shell diameter and material property
parameters, as it is fixed by the design. Analytical models of
equivalent thickness, equivalent width and maximum width based on
power law material model were derived to study the bendability.
Equation of maximum width provides bendability for designed
configuration i.e. material property, shell diameter and thickness
combinations within the machine limitations. Equivalent thicknesses
based on perfectly plastic and power law material model were
compared for four different materials grades of C-Mn steel in order
to predict the bend-ability. Effect of top roller offset on the
bendability at maximum top roller load imparting capacity is
reported.