Abstract: A complete CAD procedure to model a twisted-bladed
vertical-axis wind turbine (VAWT) is presented with the aim of
determining some practical guidelines to be used for the generation
of an easily-meshable CAD geometry to be adopted as the basis of
both CFD and FEM numerical simulations.
Abstract: Amarindra-vinitchai-mahaisuraya Bhiman throne hall
is one of the most significant throne halls in the grand palace in the
Ratthanakosin city situated in Bangkok, Thailand. This is the first
group of throne halls built in order to serve as a place for meetings,
performing state affairs and royal duties until the present time. The
structure and pattern of architectural design including the decoration
and interior design of the throne hall obviously exhibits and convey
the status of the king under the context of Thai society in the early
period of Ratthanakosin era. According to the tradition of ruling the
kingdom in absolute monarchy which had been in place since
Ayutthaya era (A.D.1350-1767), the king was deemed as Deva Raja,
the highest power and authority over the kingdom and as the greatest
emperor of the universe (Chakkravatin). The architectural design
adopted the concept of “Prasada" or Viman which served as the
dwelling place of the gods and was presented in the form of “Thai
traditional architecture" For the interior design of the throne hall, it
had been adopted to be the heaven and the centre of the Universe in
line with the cosmological beliefs of ancient people described in
scripture Tribhumikatha (Tri Bhumi) written by Phra Maha Thamma
Raja (Phraya Lithai) of the Sukhothai era (A.D.1347-1368).
According to this belief, the throne hall had been designed to represent
mount Meru, the central of the universe. On the top end of Mount
Meru is situated the Viman and dwelling place of Indra who is the king
of gods according to the idea of Deva Raja (the king god Avatar). At
the same time, Indra also existed as the king of the universe
simultaneously.
Abstract: In this paper, we propose a novel metal oxide
semiconductor field effect transistor with L-shaped channel structure
(LMOS), and several type of L-shaped structures are also designed,
studied and compared with the conventional MOSFET device for the
same average gate length (Lavg). The proposed device electrical
characteristics are analyzed and evaluated by three dimension (3-D)
ISE-TCAD simulator. It can be confirmed that the LMOS devices
have higher on-state drain current and both lower drain-induced
barrier lowering (DIBL) and subthreshold swing (S.S.) than its
conventional counterpart has. In addition, the transconductance and
voltage gain properties of the LMOS are also improved.
Abstract: The normalized difference vegetation index (NDVI)
and normalized difference moisture index (NDMI) derived from the
moderate resolution imaging spectroradiometer (MODIS) have been
widely used to identify spatial information of drought condition. The
relationship between NDVI and NDMI has been analyzed using
Pearson correlation analysis and showed strong positive relationship.
The drought indices have detected drought conditions and identified
spatial extents of drought. A comparison between normal year and
drought year demonstrates that the amplitude analysis considered both
vegetation and moisture condition is an effective method to identify
drought condition. We proposed the amplitude analysis is useful for
quick spatial assessment of drought information at a regional scale.
Abstract: This research was conducted in the Pua Watershed whereas located in the Upper Nan River Basin in Nan province, Thailand. Nan River basin originated in Nan province that comprises of many tributary streams to produce as inflow to the Sirikit dam provided huge reservoir with the storage capacity of 9510 million cubic meters. The common problems of most watersheds were found i.e. shortage water supply for consumption and agriculture utilizations, deteriorate of water quality, flood and landslide including debris flow, and unstable of riverbank. The Pua Watershed is one of several small river basins that flow through the Nan River Basin. The watershed includes 404 km2 representing the Pua District, the Upper Nan Basin, or the whole Nan River Basin, of 61.5%, 18.2% or 1.2% respectively. The Pua River is a main stream producing all year streamflow supplying the Pua District and an inflow to the Upper Nan Basin. Its length approximately 56.3 kilometers with an average slope of the channel by 1.9% measured. A diversion weir namely Pua weir bound the plain and mountainous areas with a very steep slope of the riverbed to 2.9% and drainage area of 149 km2 as upstream watershed while a mild slope of the riverbed to 0.2% found in a river reach of 20.3 km downstream of this weir, which considered as a gauged basin. However, the major branch streams of the Pua River are ungauged catchments namely: Nam Kwang and Nam Koon with the drainage area of 86 and 35 km2 respectively. These upstream watersheds produce runoff through the 3-streams downstream of Pua weir, Jao weir, and Kang weir, with an averaged annual runoff of 578 million cubic meters. They were analyzed using both statistical data at Pua weir and simulated data resulted from the hydrologic modeling system (HEC–HMS) which applied for the remaining ungauged basins. Since the Kwang and Koon catchments were limited with lack of hydrological data included streamflow and rainfall. Therefore, the mathematical modeling: HEC-HMS with the Snyder-s hydrograph synthesized and transposed methods were applied for those areas using calibrated hydrological parameters from the upstream of Pua weir with continuously daily recorded of streamflow and rainfall data during 2008-2011. The results showed that the simulated daily streamflow and sum up as annual runoff in 2008, 2010, and 2011 were fitted with observed annual runoff at Pua weir using the simple linear regression with the satisfied correlation R2 of 0.64, 062, and 0.59, respectively. The sensitivity of simulation results were come from difficulty using calibrated parameters i.e. lag-time, coefficient of peak flow, initial losses, uniform loss rates, and missing some daily observed data. These calibrated parameters were used to apply for the other 2-ungauged catchments and downstream catchments simulated.
Abstract: A way of achieving nanodimentional structural elements in high carbon steel by special kind of heat treatment and cold plastic deformation is being explored. This leads to increasing interlamellar spacing of ferrite-carbide mixture. Decreasing the interlamellar spacing with cooling temperature increasing is determined. Experiments confirm such interlamellar spacing with which high carbon steel demonstrates the highest treatment and hardening capability. Total deformation degree effect on interlamellar spacing value in a ferrite-carbide mixture is obtained. Mechanical experiments results show that high carbon steel after heat treatment and repetitive cold plastic deformation possesses high tensile strength and yield strength keeping good percentage elongation.
Abstract: With rapid technology scaling, the proportion of the
static power consumption catches up with dynamic power
consumption gradually. To decrease leakage consumption is
becoming more and more important in low-power design. This paper
presents a power-gating scheme for P-DTGAL (p-type dual
transmission gate adiabatic logic) circuits to reduce leakage power
dissipations under deep submicron process. The energy dissipations of
P-DTGAL circuits with power-gating scheme are investigated in
different processes, frequencies and active ratios. BSIM4 model is
adopted to reflect the characteristics of the leakage currents. HSPICE
simulations show that the leakage loss is greatly reduced by using the
P-DTGAL with power-gating techniques.
Abstract: This paper describes an automatic algorithm to restore
the shape of three-dimensional (3D) left ventricle (LV) models created
from magnetic resonance imaging (MRI) data using a geometry-driven
optimization approach. Our basic premise is to restore the LV shape
such that the LV epicardial surface is smooth after the restoration. A
geometrical measure known as the Minimum Principle Curvature (κ2)
is used to assess the smoothness of the LV. This measure is used to
construct the objective function of a two-step optimization process.
The objective of the optimization is to achieve a smooth epicardial
shape by iterative in-plane translation of the MRI slices.
Quantitatively, this yields a minimum sum in terms of the magnitude
of κ
2, when κ2 is negative. A limited memory quasi-Newton algorithm,
L-BFGS-B, is used to solve the optimization problem. We tested our
algorithm on an in vitro theoretical LV model and 10 in vivo
patient-specific models which contain significant motion artifacts. The
results show that our method is able to automatically restore the shape
of LV models back to smoothness without altering the general shape of
the model. The magnitudes of in-plane translations are also consistent
with existing registration techniques and experimental findings.
Abstract: To decompose organochlorides by bioremediation, co-culture biohydrogen producer and dehalogenation microorganisms is a useful method. In this study, we combined these two characteristics from a biohydrogen producer, Rhodopseudomonas palustris, and a dehalogenation microorganism, Pseudomonas putida, to enchance halorespiration in R. palustris. The genes encoding cytochrome P450cam system (camC, camA, and camB) from P. putida were expressed in R. palustris with designated expression plasmid. All tested strains were cultured to log phase then presented pentachloroethane (PCA) in media. The vector control strain could degrade PCA about 78% after 16 hours, however, the cytochrome P450cam system expressed strain, CGA-camCAB, could completely degrade PCA in 12 hours. While taking chlorinated aromatic, 3-chlorobenzoate, as sole carbon source or present benzoate as co-substrate, CGA-camCAB presented faster growth rate than vector control strain.
Abstract: This paper is intended to assist anyone with some general technical experience, but perhaps limited specific knowledge of heat transfer equipment. A characteristic of heat exchanger design is the procedure of specifying a design, heat transfer area and pressure drops and checking whether the assumed design satisfies all requirements or not. The purpose of this paper is how to design the oil cooler (heat exchanger) especially for shell-and-tube heat exchanger which is the majority type of liquid-to-liquid heat exchanger. General design considerations and design procedure are also illustrated in this paper and a flow diagram is provided as an aid of design procedure. In design calculation, the MatLAB and AutoCAD software are used. Fundamental heat transfer concepts and complex relationships involved in such exchanger are also presented in this paper. The primary aim of this design is to obtain a high heat transfer rate without exceeding the allowable pressure drop. This computer program is highly useful to design the shell-and-tube type heat exchanger and to modify existing deign.
Abstract: Several trillion cigarettes produced worldwide annually lead to many thousands of kilograms of toxic waste. Cigarette butts (CBs) accumulate in the environment due to the poor biodegradability of the cellulose acetate filters. This paper presents some of the results from a continuing study on recycling CBs into fired clay bricks. Physico-mechanical properties of fired clay bricks manufactured with different percentages of CBs are reported and discussed. The results show that the density of fired bricks was reduced by up to 30 %, depending on the percentage of CBs incorporated into the raw materials. Similarly, the compressive strength of bricks tested decreased according to the percentage of CBs included in the mix. The thermal conductivity performance of bricks was improved by 51 and 58 % for 5 and 10 % CBs content respectively. Leaching tests were carried out to investigate the levels of possible leachates of heavy metals from the manufactured clay-CB bricks. The results revealed trace amounts of heavy metals.
Abstract: Snoring is prevalent and is the most significant feature
of sleep-disordered breathing (SDB). Ignore the therapies of SDB will
lead to serious problems in health. Based on the research of
mechanisms, diagnosis, and treatments of snoring, oral appliances are
ensured in therapeutic effect and compliance, especially the
mandibular advancement devices (MADs). Market survey includes
commercial product reviews and patent analyses. Due to pay more
attention to the sleep medicine, the oral appliances are considered as a
standard treatment of snoring that promoted by American Academy of
Sleep Medicine (AASM). There are more and more adjustable MADs
developed since 1995. According to the patent analyses, there are
many drawbacks existed in the present design, such as uncomfortable,
high cost, bulky volume, and complex adjustment. In this study,
several new designs of the MAD are proposed.
Abstract: The number of cross-border student between Hong
Kong and mainland China is increasing due to an increase of
cross-border marriage between Hong Kong and mainland China. Since
the education system is different to the mainland China, the statue
Since all the children who have the right of abode in Hong Kong
entitle to have free education in Hong Kong, many of the cross-border
family prefer to send the children back to Hong Kong for their
education.
Abstract: The aim of the study was to evaluate the effect of
texturizers on the rheological properties of the apple mass and
desserts made from various raw materials. The apple varieties -
‘Antonovka’, ‘Baltais Dzidrais’, and ‘Zarja Alatau’ harvested in
Latvia, were used for the experiment. The apples were processed in a
blender unpeeled for obtaining a homogenous mass. The apple mass
was analyzed fresh and after storage at –18ºC. Both fresh and thawed
apple mass samples with added gelatin, xantan gum, and sodium
carboxymethylcellulose were whisked obtaining dessert. Pectin, pH
and soluble dry matter of the product were determined. Apparent
viscosity was measured using a rotational viscometer DV–III Ultra.
Pectin content in frozen apple mass decreased significantly (p
Abstract: The paper outlines the relevance of computational
geometry within the design and production process of architecture.
Based on two case studies, the digital chain - from the initial formfinding
to the final realization of spatial concepts - is discussed in
relation to geometric principles. The association with the fascinating
complexity that can be found in nature and its underlying geometry
was the starting point for both projects presented in the paper. The
translation of abstract geometric principles into a three-dimensional
digital design model – realized in Rhinoceros – was followed by a
process of transformation and optimization of the initial shape that
integrated aesthetic, spatial and structural qualities as well as aspects
of material properties and conditions of production.
Abstract: For most image fusion algorithms separate
relationship by pixels in the image and treat them more or less
independently. In addition, they have to be adjusted different
parameters in different time or weather. In this paper, we propose a
region–based image fusion which combines aspects of feature and
pixel-level fusion method to replace only by pixel. The basic idea is
to segment far infrared image only and to add information of each
region from segmented image to visual image respectively. Then we
determine different fused parameters according different region. At
last, we adopt artificial neural network to deal with the problems of
different time or weather, because the relationship between fused
parameters and image features are nonlinear. It render the fused
parameters can be produce automatically according different states.
The experimental results present the method we proposed indeed
have good adaptive capacity with automatic determined fused
parameters. And the architecture can be used for lots of applications.
Abstract: The right to housing is a basic need while good
quality and affordable housing is a reflection of a high quality of life.
However, housing remains a major problem for most, especially for
the bottom billions. Satisfaction on housing and neighbourhood
conditions are one of the important indicators that reflect quality of
life. These indicators are also important in the process of evaluating
housing policy with the objective to increase the quality of housing
and neighbourhood. The research method is purely based on a
quantitative method, using a survey. The findings show that housing
purchasing trend in urban Malaysia is determined by demographic
profiles, mainly by education level, age, gender and income. The
period of housing ownership also influenced the socio-cultural
interactions and satisfaction of house owners with their
neighbourhoods. The findings also show that the main concerns for
house buyers in urban areas are price and location of the house.
Respondents feel that houses in urban Malaysia is too expensive and
beyond their affordability. Location of houses and distance from
work place are also regarded as the main concern. However,
respondents are fairly satisfied with religious and socio-cultural
facilities in the housing areas and most importantly not many regard
ethnicity as an issue in their decision-making, when buying a house.
Abstract: Human activity is a major concern in a wide variety of
applications, such as video surveillance, human computer interface
and face image database management. Detecting and recognizing
faces is a crucial step in these applications. Furthermore, major
advancements and initiatives in security applications in the past years
have propelled face recognition technology into the spotlight. The
performance of existing face recognition systems declines significantly
if the resolution of the face image falls below a certain level.
This is especially critical in surveillance imagery where often, due to
many reasons, only low-resolution video of faces is available. If these
low-resolution images are passed to a face recognition system, the
performance is usually unacceptable. Hence, resolution plays a key
role in face recognition systems. In this paper we introduce a new
low resolution face recognition system based on mixture of expert
neural networks. In order to produce the low resolution input images
we down-sampled the 48 × 48 ORL images to 12 × 12 ones using
the nearest neighbor interpolation method and after that applying
the bicubic interpolation method yields enhanced images which is
given to the Principal Component Analysis feature extractor system.
Comparison with some of the most related methods indicates that
the proposed novel model yields excellent recognition rate in low
resolution face recognition that is the recognition rate of 100% for
the training set and 96.5% for the test set.
Abstract: This paper presents a method to support dynamic
packing in cases when no collision-free path can be found. The
method, which is primarily based on path planning and shrinking of
geometries, suggests a minimal geometry design change that results
in a collision-free assembly path. A supplementing approach to
optimize geometry design change with respect to redesign cost is
described. Supporting this dynamic packing method, a new method
to shrink geometry based on vertex translation, interweaved with
retriangulation, is suggested. The shrinking method requires neither
tetrahedralization nor calculation of medial axis and it preserves the
topology of the geometry, i.e. holes are neither lost nor introduced.
The proposed methods are successfully applied on industrial
geometries.