Abstract: This paper presents a generalization kernel for gravitational
potential determination by harmonic splines. It was shown
in [10] that the gravitational potential can be approximated using a
kernel represented as a Newton integral over the real Earth body. On
the other side, the theory of geopotential approximation by harmonic
splines uses spherically oriented kernels. The purpose of this paper
is to show that in the spherical case both kernels have the same type
of representation, which leads us to conclusion that it is possible
to consider the kernel represented as a Newton integral over the real
Earth body as a kind of generalization of spherically harmonic kernels
to real geometries.
Abstract: The presence of toxic heavy metals in industrial
effluents is one of the serious threats to the environment. Heavy
metals such as Cadmium, Chromium, Lead, Nickel, Zinc, Mercury,
Copper, Arsenic are found in the effluents of industries such as
foundries, electroplating, petrochemical, battery manufacturing,
tanneries, fertilizer, dying, textiles, metallurgical and metal finishing.
Tremendous increase of industrial copper usage and its presence in
industrial effluents has lead to a growing concern about the fate and
effects of Copper in the environment. Percolation of industrial
effluents through soils leads to contamination of ground water and
soils. The transport of heavy metals and their diffusion into the soils
has therefore, drawn the attention of the researchers.
In this study, an attempt has been made to delineate the
mechanisms of transport and fate of copper in terrestrial
environment. Column studies were conducted using perplex glass
square column of dimension side 15 cm and 1.35 m long. The soil
samples were collected from a natural drain near Mohali (India). The
soil was characterized to be poorly graded sandy loam. The soil was
compacted to the field dry density level of about 1.6 g/cm3. Break
through curves for different depths of the column were plotted. The
results of the column study indicated that the copper has high
tendency to flow in the soils and fewer tendencies to get absorbed on
the soil particles. The t1/2 estimates obtained from the studies can be
used for design copper laden wastewater disposal systems.
Abstract: During the last couple of years, the degree of dependence on IT systems has reached a dimension nobody imagined to be possible 10 years ago. The increased usage of mobile devices (e.g., smart phones), wireless sensor networks and embedded devices (Internet of Things) are only some examples of the dependency of modern societies on cyber space. At the same time, the complexity of IT applications, e.g., because of the increasing use of cloud computing, is rising continuously. Along with this, the threats to IT security have increased both quantitatively and qualitatively, as recent examples like STUXNET or the supposed cyber attack on Illinois water system are proofing impressively. Once isolated control systems are nowadays often publicly available - a fact that has never been intended by the developers. Threats to IT systems don’t care about areas of responsibility. Especially with regard to Cyber Warfare, IT threats are no longer limited to company or industry boundaries, administrative jurisdictions or state boundaries. One of the important countermeasures is increased cooperation among the participants especially in the field of Cyber Defence. Besides political and legal challenges, there are technical ones as well. A better, at least partially automated exchange of information is essential to (i) enable sophisticated situational awareness and to (ii) counter the attacker in a coordinated way. Therefore, this publication performs an evaluation of state of the art Intrusion Detection Message Exchange protocols in order to guarantee a secure information exchange between different entities.
Abstract: The purpose of the study is to determine the primary mathematics student teachers- views related to use instructional technology tools in course of the learning process and to reveal how the sample presentations towards different mathematical concepts affect their views. This is a qualitative study involving twelve mathematics students from a public university. The data gathered from two semi-structural interviews. The first one was realized in the beginning of the study. After that the representations prepared by the researchers were showed to the participants. These representations contain animations, Geometer-s Sketchpad activities, video-clips, spreadsheets, and power-point presentations. The last interview was realized at the end of these representations. The data from the interviews and content analyses were transcribed and read and reread to explore the major themes. Findings revealed that the views of the students changed in this process and they believed that the instructional technology tools should be used in their classroom.
Abstract: Injection forging is a Nett-shape manufacturing
process in which one or two punches move axially causing a radial
flow into a die cavity in a form which is prescribed by the exitgeometry,
such as pulley, flanges, gears and splines on a shaft. This
paper presents an experimental and numerical study of the injection
forging of splines in terms of load requirement and material flow.
Three dimensional finite element analyses are used to investigate the
effect of some important parameters in this process. The experiment
has been carried out using solid commercial lead billets with two
different billet diameters and four different dies.
Abstract: The building sector is the largest energy consumer and
CO2 emitter in the European Union (EU) and therefore the active
reduction of energy consumption and elimination of energy wastage
are among the main goals in it. Healthy housing and energy
efficiency are affected by many factors which set challenges to
monitoring, control and research of indoor air quality (IAQ) and
energy consumption, especially in old buildings. These challenges
include measurement and equipment costs, for example.
Additionally, the measurement results are difficult to interpret and
their usage in the ventilation control is also limited when taking into
account the energy efficiency of housing at the same time. The main
goal of this study is to develop a cost-effective building monitoring
and control system especially for old buildings. The starting point or
keyword of the development process is a wireless system; otherwise
the installation costs become too high. As the main result, this paper
describes an idea of a wireless building monitoring and control
system. The first prototype of the system has been installed in 10
residential buildings and in 10 school buildings located in the City of
Kuopio, Finland.
Abstract: Simultaneous effects of temperature, immersion time, salt concentration, sucrose concentration, pressure and convective dryer temperature on the combined osmotic dehydration - convective drying of edible button mushrooms were investigated. Experiments were designed according to Central Composite Design with six factors each at five different levels. Response Surface Methodology (RSM) was used to determine the optimum processing conditions that yield maximum water loss and rehydration ratio and minimum solid gain and shrinkage in osmotic-convective drying of edible button mushrooms. Applying surfaces profiler and contour plots optimum operation conditions were found to be temperature of 39 °C, immersion time of 164 min, salt concentration of 14%, sucrose concentration of 53%, pressure of 600 mbar and drying temperature of 40 °C. At these optimum conditions, water loss, solid gain, rehydration ratio and shrinkage were found to be 63.38 (g/100 g initial sample), 3.17 (g/100 g initial sample), 2.26 and 7.15%, respectively.
Abstract: The modeling of inelastic behavior of plastic materials requires measurements providing information on material response to different multiaxial loading conditions. Different triaxiality conditions and values of Lode parameters have to be
covered for complex description of the material plastic behavior.
Samples geometries providing material plastic behavoiur over the range of interest are proposed with the use of FEM analysis. Round samples with 3 different notches and smooth surface are used
together with butterfly type of samples tested at angle ranging for 0 to
90°. Identification of ductile damage parameters is carried out on
the basis of obtained experimental data for austenitic stainless steel.
The obtained material plastic damage parameters are subsequently applied to FEM simulation of notched CT normally samples used for
fracture mechanics testing and results from the simulation are
compared with real tests.
Abstract: This paper presents the result of three senior capstone
projects at the Department of Computer Engineering, Prince of
Songkla University, Thailand. These projects focus on developing an
examination management system for the Faculty of Engineering in
order to manage the examination both the examination room
assignments and the examination proctor assignments in each room.
The current version of the software is a web-based application. The
developed software allows the examination proctors to select their
scheduled time online while each subject is assigned to each available
examination room according to its type and the room capacity. The
developed system is evaluated using real data by prospective users of
the system. Several suggestions for further improvements are given
by the testers. Even though the features of the developed software are
not superior, the developing process can be a case study for a projectbased
teaching style. Furthermore, the process of developing this
software can show several issues in developing an educational
support application.
Abstract: In this paper, we present a novel objective nonreference performance assessment algorithm for image fusion. It takes into account local measurements to estimate how well the important information in the source images is represented by the fused image. The metric is based on the Universal Image Quality Index and uses the similarity between blocks of pixels in the input images and the fused image as the weighting factors for the metrics. Experimental results confirm that the values of the proposed metrics correlate well with the subjective quality of the fused images, giving a significant improvement over standard measures based on mean squared error and mutual information.
Abstract: We have developed a computer program consisting of
6 subtests assessing the children hand dexterity applicable in the
rehabilitation medicine. We have carried out a normative study on a
representative sample of 285 children aged from 7 to 15 (mean age
11.3) and we have proposed clinical standards for three age groups
(7-9, 9-11, 12-15 years). We have shown statistical significance of
differences among the corresponding mean values of the task time
completion. We have also found a strong correlation between the task
time completion and the age of the subjects, as well as we have
performed the test-retest reliability checks in the sample of 84
children, giving the high values of the Pearson coefficients for the
dominant and non-dominant hand in the range 0.740.97 and
0.620.93, respectively.
A new MATLAB-based programming tool aiming at analysis of
cardiologic RR intervals and blood pressure descriptors, is worked
out, too. For each set of data, ten different parameters are extracted: 2
in time domain, 4 in frequency domain and 4 in Poincaré plot
analysis. In addition twelve different parameters of baroreflex
sensitivity are calculated. All these data sets can be visualized in time
domain together with their power spectra and Poincaré plots. If
available, the respiratory oscillation curves can be also plotted for
comparison. Another application processes biological data obtained
from BLAST analysis.
Abstract: Grey mold on grape is caused by the fungus Botrytis
cinerea Pers. Trichodex WP, a new biofungicide, that contains fungal
spores of Trichoderma harzianum Rifai, was used for biological
control of Grey mold on grape. The efficacy of Trichodex WP has
been reported from many experiments. Experiments were carried out
in the locality – Banatski Karlovac, on grapevine species – talijanski
rizling. The trials were set according to instructions of methods
PP1/152(2) and PP1/17(3) , according to a fully randomized block
design. Phytotoxicity was estimated by PP methods 1/135(2), the
intensity of infection according to Towsend Heuberger , the
efficiency by Abbott, the analysis of variance with Duncan test and
PP/181(2). Application of Trichodex WP is limited to the first two
treatments. Other treatments are performed with the fungicides based
on a.i. procymidone, vinclozoline and iprodione.
Abstract: Solutions are proposed for the central problem of estimating the reaction rate coefficients in homogeneous kinetics. The first is based upon the fact that the right hand side of a kinetic differential equation is linear in the rate constants, whereas the second one uses the technique of neural networks. This second one is discussed deeply and its advantages, disadvantages and conditions of applicability are analyzed in the mirror of the first one. Numerical analysis carried out on practical models using simulated data, and our programs written in Mathematica.
Abstract: In this paper we introduce a novel method for
the characterization of synchronziation and coupling effects
in multivariate time series that can be used for the analysis
of EEG or ECoG signals recorded during epileptic seizures.
The method allows to visualize the spatio-temporal evolution
of synchronization and coupling effects that are characteristic
for epileptic seizures. Similar to other methods proposed for
this purpose our method is based on a regression analysis.
However, a more general definition of the regression together
with an effective channel selection procedure allows to use the
method even for time series that are highly correlated, which
is commonly the case in EEG/ECoG recordings with large
numbers of electrodes. The method was experimentally tested
on ECoG recordings of epileptic seizures from patients with
temporal lobe epilepsies. A comparision with the results from
a independent visual inspection by clinical experts showed
an excellent agreement with the patterns obtained with the
proposed method.
Abstract: In this paper we propose, a Lagrangian method to solve unsteady gas equation which is a nonlinear ordinary differential equation on semi-infnite interval. This approach is based on Modified generalized Laguerre functions. This method reduces the solution of this problem to the solution of a system of algebraic equations. We also compare this work with some other numerical results. The findings show that the present solution is highly accurate.
Abstract: Liposomal magnetofection is a simple, highly efficient
technology for cell transfection, demonstrating better outcome than a
number of other common gene delivery methods. However,
aggregate complexes distribution over the cell surface is non-uniform
due to the gradient of the permanent magnetic field. The aim of this
study was to estimate the efficiency of liposomal magnetofection for
prostate carcinoma PC3 cell line using newly designed device,
“DynaFECTOR", ensuring magnetofection in a dynamic gradient
magnetic field. Liposomal magnetofection in a dynamic gradient
magnetic field demonstrated the highest transfection efficiency for
PC3 cells – it increased for 21% in comparison with liposomal
magnetofection and for 42% in comparison with lipofection alone.
The optimal incubation time under dynamic magnetic field for PC3
cell line was 5 minutes and the optimal rotation frequency of
magnets – 5 rpm. The new approach also revealed lower cytotoxic
effect to cells than liposomal magnetofection.
Abstract: Post cracking behavior and load –bearing capacity of
the steel fiber reinforced high-strength concrete (SFRHSC) are
dependent on the number of fibers are crossing the weakest crack
(bridged the crack) and their orientation to the crack surface. Filling
the mould by SFRHSC, fibers are moving and rotating with the
concrete matrix flow till the motion stops in each internal point of the
concrete body. Filling the same mould from the different ends
SFRHSC samples with the different internal structures (and different
strength) can be obtained. Numerical flow simulations (using Newton
and Bingham flow models) were realized, as well as single fiber
planar motion and rotation numerical and experimental investigation
(in viscous flow) was performed. X-ray pictures for prismatic
samples were obtained and internal fiber positions and orientations
were analyzed. Similarly fiber positions and orientations in cracked
cross-section were recognized and were compared with numerically
simulated. Structural SFRHSC fracture model was created based on
single fiber pull-out laws, which were determined experimentally.
Model predictions were validated by 15x15x60cm prisms 4 point
bending tests.
Abstract: Design of Converter transformer insulation is a major
challenge. The insulation of these transformers is stressed by both
AC and DC voltages. Particle contamination is one of the major
problems in insulation structures, as they generate partial discharges
leading it to major failure of insulation. Similarly corona discharges
occur in transformer insulation. This partial discharge due to particle
movement / corona formation in insulation structure under different
voltage wave shapes, are different. In the present study, UHF
technique is adopted to understand the discharge activity and could
be realized that the characteristics of UHF signal generated under
low and high fields are different. In the case of corona generated
signal, the frequency content of the UHF sensor output lies in the
range 0.3-1.2 GHz and is not much varied except for its increase in
magnitude of discharge with the increase in applied voltage. It is
realized that the current signal injected due to partial
discharges/corona is about 4ns duration measured for first one half
cycle. Wavelet technique is adopted in the present study. It allows
one to identify the frequency content present in the signal at different
instant of time. The STD-MRA analysis helps one to identify the
frequency band in which the energy content of the UHF signal is
maximum.
Abstract: This paper presents an effective method for detecting vehicles in front of the camera-assisted car during nighttime driving. The proposed method detects vehicles based on detecting vehicle headlights and taillights using techniques of image segmentation and clustering. First, to effectively extract spotlight of interest, a segmentation process based on automatic multi-level threshold method is applied on the road-scene images. Second, to spatial clustering vehicle of detecting lamps, a grouping process based on light tracking and locating vehicle lighting patterns. For simulation, we are implemented through Da-vinci 7437 DSP board with near infrared mono-camera and tested it in the urban and rural roads. Through the test, classification performances are above 97% of true positive rate evaluated on real-time environment. Our method also has good performance in the case of clear, fog and rain weather.
Abstract: Few studies have been conducted on polymeric strip
and the behavior of soil retaining walls. This paper will present the
effect of frequency on the dynamic behavior of reinforced soil
retaining walls with polymeric strips. The frequency content
describes how the amplitude of a ground motion is distributed among
different frequencies. Since the frequency content of an earthquake
motion will strongly influence the effects of that motion, the
characterization of the motion cannot be completed without the
consideration of its frequency content. The maximum axial force of
reinforcements and horizontal displacement of the reinforced walls
are focused in this research. To clarify the dynamic behavior of
reinforced soil retaining walls with polymeric strips, a numerical
modeling using Finite Difference Method is benefited. As the results
indicate, the frequency of input base acceleration has an important
effect on the behavior of these structures. Because of resonant in the
system, where the frequency of the input dynamic load is equal to the
natural frequency of the system, the maximum horizontal
displacement and the maximum axial forces in polymeric strips is
occurred. Moreover, they were to increase the structure flexibility
because of the main advantages of polymeric strips; i.e. being simple
method of construction, having a homogeneous behavior with soils,
and possessing long durability, which are of great importance in
dynamic analysis.