Abstract: The frequency contents of the non-stationary
signals vary with time. For proper characterization of such
signals, a smart time-frequency representation is necessary.
Classically, the STFT (short-time Fourier transform) is
employed for this purpose. Its limitation is the fixed timefrequency
resolution. To overcome this drawback an enhanced
STFT version is devised. It is based on the signal driven
sampling scheme, which is named as the cross-level sampling.
It can adapt the sampling frequency and the window function
(length plus shape) by following the input signal local
variations. This adaptation results into the proposed technique
appealing features, which are the adaptive time-frequency
resolution and the computational efficiency.
Abstract: The purpose of this paper is to propose a framework for constructing correct parallel processing programs based on Equivalent Transformation Framework (ETF). ETF regards computation as In the framework, a problem-s domain knowledge and a query are described in definite clauses, and computation is regarded as transformation of the definite clauses. Its meaning is defined by a model of the set of definite clauses, and the transformation rules generated must preserve meaning. We have proposed a parallel processing method based on “specialization", a part of operation in the transformations, which resembles substitution in logic programming. The method requires “Memo-tree", a history of specialization to maintain correctness. In this paper we proposes the new method for the specialization-base parallel processing without Memo-tree.
Abstract: Fuzzy logic can be used when knowledge is
incomplete or when ambiguity of data exists. The purpose of
this paper is to propose a proactive fuzzy set- based model for
reacting to the risk inherent in investment activities relative to
a complete view of portfolio management. Fuzzy rules are
given where, depending on the antecedents, the portfolio size
may be slightly or significantly decreased or increased. The
decision maker considers acceptable bounds on the proportion
of acceptable risk and return. The Fuzzy Controller model
allows learning to be achieved as 1) the firing strength of each
rule is measured, 2) fuzzy output allows rules to be updated,
and 3) new actions are recommended as the system continues
to loop. An extension is given to the fuzzy controller that
evaluates potential financial loss before adjusting the
portfolio. An application is presented that illustrates the
algorithm and extension developed in the paper.
Abstract: Global Positioning System (GPS) technology is widely used today in the areas of geodesy and topography as well as in aeronautics mainly for military purposes. Due to the military usage of GPS, full access and use of this technology is being denied to the civilian user who must then work with a less accurate version. In this paper we focus on the estimation of the receiver coordinates ( X, Y, Z ) and its clock bias ( δtr ) of a fixed point based on pseudorange measurements of a single GPS receiver. Utilizing the instantaneous coordinates of just 4 satellites and their clock offsets, by taking into account the atmospheric delays, we are able to derive a set of pseudorange equations. The estimation of the four unknowns ( X, Y, Z , δtr ) is achieved by introducing an extended Kalman filter that processes, off-line, all the data collected from the receiver. Higher performance of position accuracy is attained by appropriate tuning of the filter noise parameters and by including other forms of biases.
Abstract: Hand gesture is one of the typical methods used in
sign language for non-verbal communication. It is most commonly
used by people who have hearing or speech problems to
communicate among themselves or with normal people. Various sign
language systems have been developed by manufacturers around the
globe but they are neither flexible nor cost-effective for the end
users. This paper presents a system prototype that is able to
automatically recognize sign language to help normal people to
communicate more effectively with the hearing or speech impaired
people. The Sign to Voice system prototype, S2V, was developed
using Feed Forward Neural Network for two-sequence signs
detection. Different sets of universal hand gestures were captured
from video camera and utilized to train the neural network for
classification purpose. The experimental results have shown that
neural network has achieved satisfactory result for sign-to-voice
translation.
Abstract: The purpose of this research is to develop and apply the
RSCMAC to enhance the dynamic accuracy of Global Positioning
System (GPS). GPS devices provide services of accurate positioning,
speed detection and highly precise time standard for over 98% area on
the earth. The overall operation of Global Positioning System includes
24 GPS satellites in space; signal transmission that includes 2
frequency carrier waves (Link 1 and Link 2) and 2 sets random
telegraphic codes (C/A code and P code), on-earth monitoring stations
or client GPS receivers. Only 4 satellites utilization, the client position
and its elevation can be detected rapidly. The more receivable
satellites, the more accurate position can be decoded. Currently, the
standard positioning accuracy of the simplified GPS receiver is greatly
increased, but due to affected by the error of satellite clock, the
troposphere delay and the ionosphere delay, current measurement
accuracy is in the level of 5~15m. In increasing the dynamic GPS
positioning accuracy, most researchers mainly use inertial navigation
system (INS) and installation of other sensors or maps for the
assistance. This research utilizes the RSCMAC advantages of fast
learning, learning convergence assurance, solving capability of
time-related dynamic system problems with the static positioning
calibration structure to improve and increase the GPS dynamic
accuracy. The increasing of GPS dynamic positioning accuracy can be
achieved by using RSCMAC system with GPS receivers collecting
dynamic error data for the error prediction and follows by using the
predicted error to correct the GPS dynamic positioning data. The
ultimate purpose of this research is to improve the dynamic positioning
error of cheap GPS receivers and the economic benefits will be
enhanced while the accuracy is increased.
Abstract: The Model for Knowledge Base of Computational Objects
(KBCO model) has been successfully applied to represent the
knowledge of human like Plane Geometry, Physical, Calculus. However,
the original model cannot easyly apply in inorganic chemistry
field because of the knowledge specific problems. So, the aim of
this article is to introduce how we extend the Computional Object
(Com-Object) in KBCO model, kinds of fact, problems model, and
inference algorithms to develop a program for solving problems
in inorganic chemistry. Our purpose is to develop the application
that can help students in their study inorganic chemistry at schools.
This application was built successful by using Maple, C# and WPF
technology. It can solve automatically problems and give human
readable solution agree with those writting by students and teachers.
Abstract: Knowledge of an organization does not merely reside
in structured form of information and data; it is also embedded in
unstructured form. The discovery of such knowledge is particularly
difficult as the characteristic is dynamic, scattered, massive and
multiplying at high speed. Conventional methods of managing
unstructured information are considered too resource demanding and
time consuming to cope with the rapid information growth.
In this paper, a Multi-faceted and Automatic Knowledge
Elicitation System (MAKES) is introduced for the purpose of
discovery and capture of organizational knowledge. A trial
implementation has been conducted in a public organization to
achieve the objective of decision capture and navigation from a
number of meeting minutes which are autonomously organized,
classified and presented in a multi-faceted taxonomy map in both
document and content level. Key concepts such as critical decision
made, key knowledge workers, knowledge flow and the relationship
among them are elicited and displayed in predefined knowledge
model and maps. Hence, the structured knowledge can be retained,
shared and reused.
Conducting Knowledge Management with MAKES reduces work
in searching and retrieving the target decision, saves a great deal of
time and manpower, and also enables an organization to keep pace
with the knowledge life cycle. This is particularly important when
the amount of unstructured information and data grows extremely
quickly. This system approach of knowledge management can
accelerate value extraction and creation cycles of organizations.
Abstract: The main purpose of this study is to analyze the
feelings of tourists for the service quality of the bikeway. In addition,
this study also analyzed the causal relationship between service
quality and satisfaction to visitor-s lane loyalty. In this study, the Ya
Tam San bikeway visitor-s subjects, using the designated convenience
sampling carried out the survey, a total of 651 questionnaires were
validly. Valid questionnaires after statistical analysis, the following
findings: 1. Visitor-s lane highest quality of service project: the routes
through the region weather pleasant. Lane "with health and sports," the
highest satisfaction various factors of service quality and satisfaction,
loyal between correlations exist. 4. Guided tours of bikeways, the
quality of the environment, and modeling imagery can effectively
predict visitor satisfaction. 5. Quality of bikeway, public facilities,
guided tours, and modeling imagery can effectively predict visitor
loyalty. According to the above results, the study not only makes
recommendations to the government units and the bicycle industry,
also asked the research direction for future researchers.
Abstract: Because support interference corrections are not properly
understood, engineers mostly rely on expensive dummy measurements
or CFD calculations. This paper presents a method based on uncorrected wind tunnel measurements and fast calculation techniques
(it is a hybrid method) to calculate wall interference, support interference and residual interference (when e.g. a support member
closely approaches the wind tunnel walls) for any type of wind tunnel and support configuration. The method provides with a simple formula
for the calculation of the interference gradient. This gradient is
based on the uncorrected measurements and a successive calculation
of the slopes of the interference-free aerodynamic coefficients. For the latter purpose a new vortex-lattice routine is developed that corrects
the slopes for viscous effects. A test case of a measurement on a wing proves the value of this hybrid method as trends and orders of
magnitudes of the interference are correctly determined.
Abstract: The aim of this paper is to study in depth some methodological aspects of social interventation, focusing on desirable passage from social maternage method to peer advocacy method. For this purpose, we intend analyze social and organizative components, that affect operator's professional action and that are part of his psychological environment, besides the physical and social one. In fact, operator's interventation should not be limited to a pure supply of techniques, nor to take shape as improvised action, but “full of good purposes".
Abstract: An active suspension system has been proposed to
improve the ride comfort. A quarter-car 2 degree-of-freedom (DOF)
system is designed and constructed on the basis of the concept of a
four-wheel independent suspension to simulate the actions of an
active vehicle suspension system. The purpose of a suspension
system is to support the vehicle body and increase ride comfort. The
aim of the work described in the paper was to illustrate the
application of fuzzy logic technique to the control of a continuously
damping automotive suspension system. The ride comfort is
improved by means of the reduction of the body acceleration caused
by the car body when road disturbances from smooth road and real
road roughness.
The paper describes also the model and controller used in the
study and discusses the vehicle response results obtained from a
range of road input simulations. In the conclusion, a comparison of
active suspension fuzzy control and Proportional Integration
derivative (PID) control is shown using MATLAB simulations.
Abstract: In this paper by using the port-controlled Hamiltonian
(PCH) systems theory, a full-order nonlinear controlled model is first
developed. Then a nonlinear passivity-based robust adaptive control
(PBRAC) of switched reluctance motor in the presence of external
disturbances for the purpose of torque ripple reduction and
characteristic improvement is presented. The proposed controller
design is separated into the inner loop and the outer loop controller.
In the inner loop, passivity-based control is employed by using
energy shaping techniques to produce the proper switching function.
The outer loop control is employed by robust adaptive controller to
determine the appropriate Torque command. It can also overcome the
inherent nonlinear characteristics of the system and make the whole
system robust to uncertainties and bounded disturbances. A 4KW 8/6
SRM with experimental characteristics that takes magnetic saturation
into account is modeled, simulation results show that the proposed
scheme has good performance and practical application prospects.
Abstract: Due to the fast development of technology, the
competition of technological products is turbulent; therefore, it is
important to understand the market trend, consumers- demand and
preferences. As the smartphones are prevalent, the main purpose of
this paper is to utilize Analytic Hierarchy Process (AHP) to analyze
consumer-s purchase evaluation factors of smartphones. Through the
AHP expert questionnaire, the smartphones- main functions are
classified as “user interface", “mobile commerce functions",
“hardware and software specifications", “entertainment functions" and
“appearance and design", five aspects to analyze the weights. Then
four evaluation criteria are evaluated under each aspect to rank the
weights. Based on an analysis of data shows that consumers consider
when purchase factors are “hardware and software specifications",
“user interface", “appearance and design", “mobile commerce
functions" and “entertainment functions" in sequence. The “hardware
and software specifications" aspect obtains the weight of 33.18%; it is
the most important factor that consumers are taken into account. In
addition, the most important evaluation criteria are central processing
unit, operating system, touch screen, and battery function in sequence.
The results of the study can be adopted as reference data for mobile
phone manufacturers in the future on the design and marketing
strategy to satisfy the voice of customer.
Abstract: Successful public-private-partnership (PPP)
implementation can not be achieved without the active participation of
private sector companies. This paper examines the decision-making of
private sector companies in public works delivered by the PPP model
on the basis of social responsibility theory. It proposes that private
sector companies should indentify objectives of entering into PPP
projects, and shoulder relevant social responsibilities, while a
minimum return should also be guaranteed in their favor, so as to
compensate for their assumed risk and support them to take on
responsibilities in the future. The paper also gives a calculation
regarding the appropriate scale and reasonable degree of private sector
involvement in PPP projects through the cost-benefit analysis in a
specific case study, with the purpose to guide the private sector
companies to create a cooperation environment resembling
“symbiosis" and facilitate the smooth implementation of public works
delivered by the PPP model.
Abstract: The purpose of this note is to obtain some properties of
(∈,∈ ∨q)- fuzzy bi-ideals in a Γ-semigroup in order to characterize
regular and intra-regular Γ-semigroups.
Abstract: Recently, the design is becoming important in product development. The technology which is a strong point of Japan is immediately caught up by the foreign countries, and the price competition begins. Therefore companies tend to plan differentiation of products by the design or a color. The purpose of my work was to consider the optimal color for using by product development. We needed to clarify the thing leading to color preference for this purpose. Two kinds of investigations were made. By the first investigation, we found out that a geographical factor difference existed in color preference. Then, investigation which regarded the difference as latitude was conducted. However, the result expected from the difference in latitude was not obtained. It seems that it is necessary to set up difference of latitude a little more greatly, or to reexamine by other geographical factors.
Abstract: Through 1980s, management accounting researchers
described the increasing irrelevance of traditional control and
performance measurement systems. The Balanced Scorecard (BSC)
is a critical business tool for a lot of organizations. It is a
performance measurement system which translates mission and
strategy into objectives. Strategy map approach is a development
variant of BSC in which some necessary causal relations must be
established. To recognize these relations, experts usually use
experience. It is also possible to utilize regression for the same
purpose. Structural Equation Modeling (SEM), which is one of the
most powerful methods of multivariate data analysis, obtains more
appropriate results than traditional methods such as regression. In the
present paper, we propose SEM for the first time to identify the
relations between objectives in the strategy map, and a test to
measure the importance of relations. In SEM, factor analysis and test
of hypotheses are done in the same analysis. SEM is known to be
better than other techniques at supporting analysis and reporting. Our
approach provides a framework which permits the experts to design
the strategy map by applying a comprehensive and scientific method
together with their experience. Therefore this scheme is a more
reliable method in comparison with the previously established
methods.
Abstract: The effect of the blade tip geometry of a high pressure
gas turbine is studied experimentally and computationally for high
speed leakage flows. For this purpose two simplified models are
constructed, one models a flat tip of the blade and the second models
a cavity tip of the blade. Experimental results are obtained from a
transonic wind tunnel to show the static pressure distribution along
the tip wall and provide flow visualization. RANS computations
were carried to provide further insight into the mean flow behavior
and to calculate the discharge coefficient which is a measure of the
flow leaking over the tip. It is shown that in both geometries of tip
the flow separates over the tip to form a separation bubble. The
bubble is higher for the cavity tip while a complete shock wave
system of oblique waves ending with a normal wave can be seen for
the flat tip. The discharge coefficient for the flat tip shows less
dependence on the pressure ratio over the blade tip than the cavity
tip. However, the discharge coefficient for the cavity tip is lower than
that of the flat tip, showing a better ability to reduce the leakage flow
and thus increase the turbine efficiency.
Abstract: In this study, a system of encryption based on chaotic
sequences is described. The system is used for encrypting digital
image data for the purpose of secure image transmission. An image
secure communication scheme based on Logistic map chaotic
sequences with a nonlinear function is proposed in this paper.
Encryption and decryption keys are obtained by one-dimensional
Logistic map that generates secret key for the input of the nonlinear
function. Receiver can recover the information using the received
signal and identical key sequences through the inverse system
technique. The results of computer simulations indicate that the
transmitted source image can be correctly and reliably recovered by
using proposed scheme even under the noisy channel. The
performance of the system will be discussed through evaluating the
quality of recovered image with and without channel noise.