Abstract: This paper reviews various approaches that have been
used for the modeling and simulation of large-scale engineering
systems and determines their appropriateness in the development of a
RICS modeling and simulation tool. Bond graphs, linear graphs,
block diagrams, differential and difference equations, modeling
languages, cellular automata and agents are reviewed. This tool
should be based on linear graph representation and supports symbolic
programming, functional programming, the development of noncausal
models and the incorporation of decentralized approaches.
Abstract: This paper describes various stages of design and prototyping of a modular robot for use in various industrial applications. The major goal of current research has been to design and make different robotic joints at low cost capable of being assembled together in any given order for achieving various robot configurations. Five different types of joins were designed and manufactured where extensive research has been carried out on the design of each joint in order to achieve optimal strength, size, modularity, and price. This paper presents various stages of research and development undertaken to engineer these joints that include material selection, manufacturing, and strength analysis. The outcome of this research addresses the birth of a new generation of modular industrial robots with a wider range of applications and greater efficiency.
Abstract: Today, numerical simulation is a powerful tool to
solve various hydraulic engineering problems. The aim of this
research is numerical solutions of shallow water equations using
finite volume method for Simulations of dam break over wet and dry
bed. In order to solve Riemann problem, Roe-s approximate solver is
used. To evaluate numerical model, simulation was done in 1D and
2D states. In 1D state, two dam break test over dry bed (with and
without friction) were studied. The results showed that Structural
failure around the dam and damage to the downstream constructions
in bed without friction is more than friction bed. In 2D state, two
tests for wet and dry beds were done. Generally in wet bed case,
waves are propagated to canal sides but in dry bed it is not
significant. Therefore, damage to the storage facilities and
agricultural lands in wet bed case is more than in dry bed.
Abstract: In this paper we propose a method for vision systems
to consistently represent functional dependencies between different
visual routines along with relational short- and long-term knowledge
about the world. Here the visual routines are bound to visual properties
of objects stored in the memory of the system. Furthermore,
the functional dependencies between the visual routines are seen
as a graph also belonging to the object-s structure. This graph is
parsed in the course of acquiring a visual property of an object to
automatically resolve the dependencies of the bound visual routines.
Using this representation, the system is able to dynamically rearrange
the processing order while keeping its functionality. Additionally, the
system is able to estimate the overall computational costs of a certain
action. We will also show that the system can efficiently use that
structure to incorporate already acquired knowledge and thus reduce
the computational demand.
Abstract: Breastfeeding is an important concept in the maternal life of a woman. In this paper, we focus on exclusive breastfeeding. Exclusive breastfeeding is the feeding of a baby on no other milk apart from breast milk. This type of breastfeeding is very important during the first six months because it supports optimal growth and development during infancy and reduces the risk of obliterating diseases and problems. Moreover, in Mauritius, exclusive breastfeeding has decreased the incidence and/or severity of diarrhea, lower respiratory infection and urinary tract infection. In this paper, we give an overview of exclusive breastfeeding in Mauritius and the factors influencing it. We further analyze the local practices of exclusive breastfeeding using the Generalized Poisson regression model and the negative-binomial model since the data are over-dispersed.
Abstract: Stainless steel has been employed in many
engineering applications ranging from pharmaceutical equipment to
piping in the nuclear reactors and storage to chemical products. In
this attempt, simulation of fatigue crack growth based on
experimental results of austenitic stainless steel 304L was presented
using AFGROW code when NASGRO mode laws adopted. Double
through crack at hole specimen is used in this investigation under
constant amplitude loading. Effect of mean stress is highlighted.
Results show that fatigue crack growth rate (FCGR) and fatigue life
were affected by maximum applied load and dimension of hole. An
equivalent of Paris law for this material was estimated.
Abstract: This paper describes a new supervised fusion (hybrid)
electrocardiogram (ECG) classification solution consisting of a new
QRS complex geometrical feature extraction as well as a new version
of the learning vector quantization (LVQ) classification algorithm
aimed for overcoming the stability-plasticity dilemma. Toward this
objective, after detection and delineation of the major events of ECG
signal via an appropriate algorithm, each QRS region and also its
corresponding discrete wavelet transform (DWT) are supposed as
virtual images and each of them is divided into eight polar sectors.
Then, the curve length of each excerpted segment is calculated
and is used as the element of the feature space. To increase the
robustness of the proposed classification algorithm versus noise,
artifacts and arrhythmic outliers, a fusion structure consisting of
five different classifiers namely as Support Vector Machine (SVM),
Modified Learning Vector Quantization (MLVQ) and three Multi
Layer Perceptron-Back Propagation (MLP–BP) neural networks with
different topologies were designed and implemented. The new proposed
algorithm was applied to all 48 MIT–BIH Arrhythmia Database
records (within–record analysis) and the discrimination power of the
classifier in isolation of different beat types of each record was
assessed and as the result, the average accuracy value Acc=98.51%
was obtained. Also, the proposed method was applied to 6 number
of arrhythmias (Normal, LBBB, RBBB, PVC, APB, PB) belonging
to 20 different records of the aforementioned database (between–
record analysis) and the average value of Acc=95.6% was achieved.
To evaluate performance quality of the new proposed hybrid learning
machine, the obtained results were compared with similar peer–
reviewed studies in this area.
Abstract: Although services play a crucial role in economy,
service did not gain as much importance as productivity management
in manufacturing. This paper presents key findings from literature
and practice. Based on an initial definition of complex services, seven
productivity concepts are briefly presented and assessed by relevant,
complex service specific criteria. Following the findings a complex
service productivity model is proposed. The novel model comprises
of all specific dimensions of service provision from both, the
provider-s as well as costumer-s perspective. A clear assignment of
identified value drivers and relationships between them is presented.
In order to verify the conceptual service productivity model a case
study from a project engineering department of a chemical plant
development and construction company is presented.
Abstract: Multiphase flow transport in porous medium is very common and significant in science and engineering applications. For example, in CO2 Storage and Enhanced Oil Recovery processes, CO2 has to be delivered to the pore spaces in reservoirs and aquifers. CO2 storage and enhance oil recovery are actually displacement processes, in which oil or water is displaced by CO2. This displacement is controlled by pore size, chemical and physical properties of pore surfaces and fluids, and also pore wettability. In this study, a technique was developed to measure the pressure profile for driving gas/liquid to displace water in pores. Through this pressure profile, the impact of pore size on the multiphase flow transport and displacement can be analyzed. The other rig developed can be used to measure the static and dynamic pore wettability and investigate the effects of pore size, surface tension, viscosity and chemical structure of liquids on pore wettability.
Abstract: Complex engineering design problems consist of
numerous factors of varying criticalities. Considering fundamental features of design and inferior details alike will result in an extensive
waste of time and effort. Design parameters should be introduced gradually as appropriate based on their significance relevant to the
problem context. This motivates the representation of design parameters at multiple levels of an abstraction hierarchy. However, developing abstraction hierarchies is an area that is not well
understood. Our research proposes a novel hierarchical abstraction methodology to plan effective engineering designs and processes. It
provides a theoretically sound foundation to represent, abstract and stratify engineering design parameters and tasks according to causality and criticality. The methodology creates abstraction
hierarchies in a recursive and bottom-up approach that guarantees no
backtracking across any of the abstraction levels. The methodology consists of three main phases, representation, abstraction, and layering to multiple hierarchical levels. The effectiveness of the
developed methodology is demonstrated by a design problem.
Abstract: In this paper, a new approach based on the extent of
friendship between the nodes is proposed which makes the nodes to
co-operate in an ad hoc environment. The extended DSR protocol is
tested under different scenarios by varying the number of malicious
nodes and node moving speed. It is also tested varying the number of
nodes in simulation used. The result indicates the achieved
throughput by extended DSR is greater than the standard DSR and
indicates the percentage of malicious drops over total drops are less
in the case of extended DSR than the standard DSR.
Abstract: Within the domain of Systems Engineering the need
to perform property aggregation to understand, analyze and manage
complex systems is unequivocal. This can be seen in numerous
domains such as capability analysis, Mission Essential Competencies
(MEC) and Critical Design Features (CDF). Furthermore, the need
to consider uncertainty propagation as well as the sensitivity of
related properties within such analysis is equally as important when
determining a set of critical properties within such a system.
This paper describes this property breakdown in a number of
domains within Systems Engineering and, within the area of CDFs,
emphasizes the importance of uncertainty analysis. As part of this, a
section of the paper describes possible techniques which may be used
within uncertainty propagation and in conclusion an example is
described utilizing one of the techniques for property and uncertainty
aggregation within an aircraft system to aid the determination of
Critical Design Features.
Abstract: Telecommuting has become an increasingly popular
work arrangement. However, little research has examined the impact
of telecommuting on the relationship between employees and the
organization. This study aims to shed light on this aspect by
comparing the loyalty of telecommuters and non telecommuters as it
can be viewed from three angles: organizational loyalty, peer loyalty,
and professional loyalty. Furthermore, this paper will explore the
dynamics among employee loyalty, productivity, and job
satisfaction. Whereas previous studies had looked on employees that
are not fully telecommuting, the current study concentrates on
employees that are exclusively working from home.
Abstract: Octree compression techniques have been used
for several years for compressing large three dimensional data
sets into homogeneous regions. This compression technique
is ideally suited to datasets which have similar values in
clusters. Oil engineers represent reservoirs as a three dimensional
grid where hydrocarbons occur naturally in clusters. This
research looks at the efficiency of storing these grids using
octree compression techniques where grid cells are broken
into active and inactive regions. Initial experiments yielded
high compression ratios as only active leaf nodes and their
ancestor, header nodes are stored as a bitstream to file on
disk. Savings in computational time and memory were possible
at decompression, as only active leaf nodes are sent to the
graphics card eliminating the need of reconstructing the original
matrix. This results in a more compact vertex table, which can
be loaded into the graphics card quicker and generating shorter
refresh delay times.
Abstract: In this paper a new control strategy based on Brain
Emotional Learning (BEL) model has been introduced. A modified
BEL model has been proposed to increase the degree of freedom,
controlling capability, reliability and robustness, which can be
implemented in real engineering systems.
The performance of the proposed BEL controller has been
illustrated by applying it on different nonlinear uncertain systems,
showing very good adaptability and robustness, while maintaining
stability.
Abstract: The Non-Rotating Adjustable Stabilizer / Directional
Solution (NAS/DS) is the imitation of a mechanical process or an
object by a directional drilling operation that causes a respond
mathematically and graphically to data and decision to choose the
best conditions compared to the previous mode.
The NAS/DS Auto Guide rotary steerable tool is undergoing final
field trials. The point-the-bit tool can use any bit, work at any
rotating speed, work with any MWD/LWD system, and there is no
pressure drop through the tool. It is a fully closed-loop system that
automatically maintains a specified curvature rate.
The Non–Rotating Adjustable stabilizer (NAS) can be controls
curvature rate by exactly positioning and run with the optimum bit,
use the most effective weight (WOB) and rotary speed (RPM) and
apply all of the available hydraulic energy to the bit. The directional
simulator allowed to specify the size of the curvature rate
performance errors of the NAS tool and the magnitude of the random
errors in the survey measurements called the Directional Solution
(DS).
The combination of these technologies (NAS/DS) will provide
smoother bore holes, reduced drilling time, reduced drilling cost and
incredible targeting precision. This simulator controls curvature rate
by precisely adjusting the radial extension of stabilizer blades on a
near bit Non-Rotating Stabilizer and control process corrects for the
secondary effects caused by formation characteristics, bit and tool
wear, and manufacturing tolerances.
Abstract: Green Lean Total Quality Management (TQM)
System is a system comprises of Environmental Management System
(EMS) practices which is integrated to TQM with Lean
Manufacturing (LM) principles. The ultimate goal of this system is to
focus on achieving total customer satisfaction and environmental care by removing eight wastes available in any process in an
organization. A survey questionnaire was developed and distributed to 30 highly active automotive vendors in Malaysia and analyzed by
SPSS v.17. It was found out that some vendors have been practicing TQM and LM while some have started to implement EMS. This
study is only focusing on highly active companies that have been involved in MAJAICO Program and Proton Vendor Development
Program. This is the first study conducted to know the current status of TQM, LM and EMS practices in highly active automotive companies in Malaysia. It was found out that EMS has been
practiced by 16 companies out of 30. Within these 16 companies the
approach is more holistic and green. This is a preliminary study that combined 4 awards practices, ISO/TS16949, Toyota Production
System SAEJ4000, MAJAICO Lean Production System and EMS.
Abstract: The index of sustainable functionality (ISF) is an adaptive, multi-criteria technique that is used to measure sustainability; it is a concept that can be transposed to many regions throughout the world. An ISF application of the Southern Regional Organisation of Councils (SouthROC) in South East Queensland (SEQ) – the fastest growing region in Australia – indicated over a 25 year period an increase of over 10% level of functionality from 58.0% to 68.3%. The ISF of SouthROC utilised methodologies that derived from an expert panel based approach. The overall results attained an intermediate level of functionality which amounted to related concerns of economic progress and lack of social awareness. Within the region, a solid basis for future testing by way of measured changes and developed trends can be established. In this regard as management tool, the ISF record offers support for regional sustainability practice and decision making alike. This research adaptively analyses sustainability – a concept that is lacking throughout much of the academic literature and any reciprocal experimentation. This lack of knowledge base has been the emphasis of where future sustainability research can grow from and prove useful in rapidly growing regions. It is the intentions of this research to help further develop the notions of index-based quantitative sustainability.
Abstract: Problem Statement:Rapid technological developments of the 21st century have advanced our daily lives in various ways. Particularly in education, students frequently utilize technological resources to aid their homework and to access information. listen to radio or watch television (26.9 %) and e-mails (34.2 %) [26]. Not surprisingly, the increase in the use of technologies also resulted in an increase in the use of e-mail, instant messaging, chat rooms, mobile phones, mobile phone cameras and web sites by adolescents to bully peers. As cyber bullying occurs in the cyber space, lesser access to technologies would mean lesser cyber-harm. Therefore, the frequency of technology use is a significant predictor of cyber bullying and cyber victims. Cyber bullies try to harm the victim using various media. These tools include sending derogatory texts via mobile phones, sending threatening e-mails and forwarding confidential emails to everyone on the contacts list. Another way of cyber bullying is to set up a humiliating website and invite others to post comments. In other words, cyber bullies use e-mail, chat rooms, instant messaging, pagers, mobile texts and online voting tools to humiliate and frighten others and to create a sense of helplessness. No matter what type of bullying it is, it negatively affects its victims. Children who bully exhibit more emotional inhibition and attribute themselves more negative self-statements compared to non-bullies. Students whose families are not sympathetic and who receive lower emotional support are more prone to bully their peers. Bullies have authoritarian families and do not get along well with them. The family is the place where the children-s physical, social and psychological needs are satisfied and where their personalities develop. As the use of the internet became prevalent so did parents- restrictions on their children-s internet use. However, parents are unaware of the real harm. Studies that explain the relationship between parental attitudes and cyber bullying are scarce in literature. Thus, this study aims to investigate the relationship between cyber bullying and parental attitudes in the primary school. Purpose of Study: This study aimed to investigate the relationship between cyber bullying and parental attitudes. A second aim was to determine whether parental attitudes could predict cyber bullying and if so which variables could predict it significantly. Methods:The study had a cross-sectional and relational survey model. A demographics information form, questions about cyber bullying and a Parental Attitudes Inventory were conducted with a total of 346 students (189 females and 157 males) registered at various primary schools. Data was analysed by multiple regression analysis using the software package SPSS 16.
Abstract: The dynamic or complex modulus test is considered
to be a mechanistically based laboratory test to reliably characterize
the strength and load-resistance of Hot-Mix Asphalt (HMA) mixes
used in the construction of roads. The most common observation is
that the data collected from these tests are often noisy and somewhat
non-sinusoidal. This hampers accurate analysis of the data to obtain
engineering insight. The goal of the work presented in this paper is to
develop and compare automated evolutionary computational
techniques to filter test noise in the collection of data for the HMA
complex modulus test. The results showed that the Covariance
Matrix Adaptation-Evolutionary Strategy (CMA-ES) approach is
computationally efficient for filtering data obtained from the HMA
complex modulus test.